Manufacturing challenges with fabrication of large size mechanical harmonic drives

In truck manufacturing, the exhaust and air inlet pipes are specialized equipment that requires highly skilled, heavy machinery and small batch production methods. This paper describes a project to develop the computer numerically controlled (CNC) pipe bending process for a truck component manufacturer. The company supplies a huge range of heavy duty truck parts to the domestic market and is a significant supplier in Australia. The company has been using traditional methods of machine assisted manual pipe bending techniques. In a drive of continuous improvement, the company has acquired a pre-owned CNC bending machine capable of bending pipes automatically up to 25 bends. However, due to process mismatch, this machine is only used for single bending operation. The researchers studied the bending system and changed the manufacturing process. Using an example exhaust pipe as the benchmark, a significant drop of manufacturing lead time from 70 minutes to 40 minutes for each pipe was demonstrated. There was also a decrease of material cost due to the multiple bends part in one piece without cutting excessive materials for each single bend like it used to be.

Manufacturing challenges with fabrication of large size mechanical harmonic drives

Mechanical harmonic transmissions are relatively new kind of drives having several unusual features. For example, they can provide reduction ratio up to 500:1 in one stage, have very small teeth module compared to conventional drives and very large number of teeth (up to 1000) on a flexible gear. If for conventional drives manufacturing methods are well-developed, fabrication of large size harmonic drives presents a challenge. For example, how to fabricate a thin shell of 1.7m in diameter and wall thickness of 30mm having high precision external teeth at one end and internal splines at the other end? It is so flexible that conventional fabrication methods become unsuitable. In this paper special fabrication methods are discussed that can be used for manufacturing of large size harmonic drive components. They include electro-slag welding and refining, the use of special expandable devices to locate and hold a flexible gear, welding peripheral parts of disks with wear resistant materials with subsequent machining and others. These fabrication methods proved to be effective and harmonic drives built with the use of these innovative technologies have been installed on heavy metallurgical equipment and successfully tested.

HVAC system size – getting it right

There is evidence that many heating, ventilating & air conditioning (HVAC) systems, installed in larger buildings, have more capacity than is ever required to keep the occupants comfortable. This paper explores the reasons why this can occur, by examining a typical brief/design/documentation process. Over-sized HVAC systems cost more to install and operate and may not be able to control thermal comfort as well as a “right-sized” system. These impacts are evaluated, where data exists. Finally, some suggestions are developed to minimise both the extent of, and the negative impacts of, HVAC system over-sizing, for example: • Challenge “rules of thumb” and/or brief requirements which may be out of date. • Conduct an accurate load estimate, using AIRAH design data, specific to project location, and then resist the temptation to apply “safety factors • Use a load estimation program that accounts for thermal storage and diversification of peak loads for each zone and air handling system. • Select chiller sizes and staged or variable speed pumps and fans to ensure good part load performance. • Allow for unknown future tenancies by designing flexibility into the system, not by over-sizing. For example, generous sizing of distribution pipework and ductwork will allow available capacity to be redistributed. • Provide an auxiliary tenant condenser water loop to handle high load areas. • Consider using an Integrated Design Process, build an integrated load and energy use simulation model and test different operational scenarios • Use comprehensive Life Cycle Cost analysis for selection of the most optimal design solutions. This paper is an interim report on the findings of CRC-CI project 2002-051-B, Right-Sizing HVAC Systems, which is due for completion in January 2006.

Generation of a 3D proximal femur shape from a single projection 2D radiographic image.

Summary Generalized Procrustes analysis and thin plate splines were employed to create an average 3D shape template of the proximal femur that was warped to the size and shape of a single 2D radiographic image of a subject. Mean absolute depth errors are comparable with previous approaches utilising multiple 2D input projections. Introduction Several approaches have been adopted to derive volumetric density (g cm-3) from a conventional 2D representation of areal bone mineral density (BMD, g cm-2). Such approaches have generally aimed at deriving an average depth across the areal projection rather than creating a formal 3D shape of the bone. Methods Generalized Procrustes analysis and thin plate splines were employed to create an average 3D shape template of the proximal femur that was subsequently warped to suit the size and shape of a single 2D radiographic image of a subject. CT scans of excised human femora, 18 and 24 scanned at pixel resolutions of 1.08 mm and 0.674 mm, respectively, were equally split into training (created 3D shape template) and test cohorts. Results The mean absolute depth errors of 3.4 mm and 1.73 mm, respectively, for the two CT pixel sizes are comparable with previous approaches based upon multiple 2D input projections. Conclusions This technique has the potential to derive volumetric density from BMD and to facilitate 3D finite element analysis for prediction of the mechanical integrity of the proximal femur. It may further be applied to other anatomical bone sites such as the distal radius and lumbar spine.

One size doesn't fit all. Exploring marketing strategies for influencing three dimensions of brand loyalty

Brand loyalty is a concept that has garnered considerable interest over recent years from both marketing practitioners and academics alike. While marketers are primarily interested in ways they can generate and increase brand loyalty from their customers, academics strive to conducts research which investigates the antecedents and consequences of customer loyalty (See DeWitt, Nguyen and Marshall 2008; Russell-Bennett, McColl-Kennedy and Coote 2007).

Application of bag sampling technique for particle size distribution measurements

Bag sampling techniques can be used to temporarily store an aerosol and therefore provide sufficient time to utilize sensitive but slow instrumental techniques for recording detailed particle size distributions. Laboratory based assessment of the method were conducted to examine size dependant deposition loss coefficients for aerosols held in VelostatTM bags conforming to a horizontal cylindrical geometry. Deposition losses of NaCl particles in the range of 10 nm to 160 nm were analysed in relation to the bag size, storage time, and sampling flow rate. Results of this study suggest that the bag sampling method is most useful for moderately short sampling periods of about 5 minutes.

Disclosing donation decisions : the role of organ donor prototypes in an extended theory of planned behaviour

This study explored the role of donor prototype evaluations (perceptions of the typical organ donor) in organ donation communication decisions using an extended theory of planned behaviour (TPB) model. The model incorporated attitude, subjective norm, perceived behavioural control, moral norm, self-identity, and donor prototype evaluations to predict intentions to record consent on an organ donor register and discuss the organ donation decision with significant others. Participants completed surveys assessing the extended TPB constructs related to registering (n = 359) and discussing (n = 282). Results supported a role for donor prototype evaluations in predicting discussing intentions only. Both extended TPB structural equation models were a good fit to the data, accounting for 74 and 76% of the variance in registering and discussing intentions, respectively. Participants’ self-reported discussing behaviour (but not registering behaviour given low numbers of behavioural performers) was assessed 4 weeks later, with discussing intention as the only significant predictor of behaviour (Nagelkerke R2 = 0.11). These findings highlight the impact of people's perceptions of a typical donor on their decisions to discuss their organ donation preference, assisting our understanding of the factors influencing individuals' communication processes in efforts to bridge the gap between organ supply and demand.

Exploring donation decisions: Beliefs and preferences for organ donation in Australia

We explored common beliefs and preferences for posthumous and living organ donation in Australia where organ donation rates are low and little research exists. Content analysis of discussions revealed the advantage of prolonging/saving life whereas disadvantages differed according to donation context. A range of people/groups perceived to approve and disapprove of donation were identified. Barriers for posthumous donation included a family’s objection, with the type of organ needed important for living donation. Motivators included knowledge about potential organ recipients. Donation preferences favored loved ones, with weaker preferences for recipients who were perceived as morally questionable or responsible for their illness.

Determining the psychosocial predictors of living, living-related, and posthumous organ donation

The worldwide organ shortage occurs despite people’s positive organ donation attitudes. The discrepancy between attitudes and behaviour is evident in Australia particularly, with widespread public support for organ donation but low donation and communication rates. This problem is compounded further by the paucity of theoretically based research to improve our understanding of people’s organ donation decisions. This program of research contributes to our knowledge of individual decision making processes for three aspects of organ donation: (1) posthumous (upon death) donation, (2) living donation (to a known and unknown recipient), and (3) providing consent for donation by communicating donation wishes on an organ donor consent register (registering) and discussing the donation decision with significant others (discussing). The research program used extended versions of the Theory of Planned Behaviour (TPB) and the Prototype/Willingness Model (PWM), incorporating additional influences (moral norm, self-identity, organ recipient prototypes), to explicate the relationship between people’s positive attitudes and low rates of organ donation behaviours. Adopting the TPB and PWM (and their extensions) as a theoretical basis overcomes several key limitations of the extant organ donation literature including the often atheoretical nature of organ donation research, thefocus on individual difference factors to construct organ donor profiles and the omission of important psychosocial influences (e.g., control perceptions, moral values) that may impact on people’s decision-making in this context. In addition, the use of the TPB and PWM adds further to our understanding of the decision making process for communicating organ donation wishes. Specifically, the extent to which people’s registering and discussing decisions may be explained by a reasoned and/or a reactive decision making pathway is examined (Stage 3) with the novel application of the TPB augmented with the social reaction pathway in the PWM. This program of research was conducted in three discrete stages: a qualitative stage (Stage 1), a quantitative stage with extended models (Stage 2), and a quantitative stage with augmented models (Stage 3). The findings of the research program are reported in nine papers which are presented according to the three aspects of organ donation examined (posthumous donation, living donation, and providing consent for donation by registering or discussing the donation preference). Stage One of the research program comprised qualitative focus groups/interviews with university students and community members (N = 54) (Papers 1 and 2). Drawing broadly on the TPB framework (Paper 1), content analysed responses revealed people’s commonly held beliefs about the advantages and disadvantages (e.g., prolonging/saving life), important people or groups (e.g., family), and barriers and motivators (e.g., a family’s objection to donation), related to living and posthumous organ donation. Guided by a PWM perspective, Paper Two identified people’s commonly held perceptions of organ donors (e.g., altruistic and giving), non-donors (e.g., self-absorbed and unaware), and transplant recipients (e.g., unfortunate, and in some cases responsible/blameworthy for their predicament). Stage Two encompassed quantitative examinations of people’s decision makingfor living (Papers 3 and 4) and posthumous (Paper 5) organ donation, and for registering and discussing donation wishes (Papers 6 to 8) to test extensions to both the TPB and PWM. Comparisons of health students’ (N = 487) motivations and willingness for living related and anonymous donation (Paper 3) revealed that a person’s donor identity, attitude, past blood donation, and knowing a posthumous donor were four common determinants of willingness, with the results highlighting students’ identification as a living donor as an important motive. An extended PWM is presented in Papers Four and Five. University students’ (N = 284) willingness for living related and anonymous donation was tested in Paper Four with attitude, subjective norm, donor prototype similarity, and moral norm (but not donor prototype favourability) predicting students’ willingness to donate organs in both living situations. Students’ and community members’ (N = 471) posthumous organ donation willingness was assessed in Paper Five with attitude, subjective norm, past behaviour, moral norm, self-identity, and prior blood donation all significantly directly predicting posthumous donation willingness, with only an indirect role for organ donor prototype evaluations. The results of two studies examining people’s decisions to register and/or discuss their organ donation wishes are reported in Paper Six. People’s (N = 24) commonly held beliefs about communicating their organ donation wishes were explored initially in a TPB based qualitative elicitation study. The TPB belief determinants of intentions to register and discuss the donation preference were then assessed for people who had not previously communicated their donation wishes (N = 123). Behavioural and normative beliefs were important determinants of registering and discussing intentions; however, control beliefs influenced people’s registering intentions only. Paper Seven represented the first empirical test of the role of organ transplant recipient prototypes (i.e., perceptions of organ transplant recipients) in people’s (N = 465) decisions to register consent for organ donation. Two factors, Substance Use and Responsibility, were identified and Responsibility predicted people’s organ donor registration status. Results demonstrated that unregistered respondents were the most likely to evaluate transplant recipients negatively. Paper Eight established the role of organ donor prototype evaluations, within an extended TPB model, in predicting students’ and community members’ registering (n = 359) and discussing (n = 282) decisions. Results supported the utility of an extended TPB and suggested a role for donor prototype evaluations in predicting people’s discussing intentions only. Strong intentions to discuss donation wishes increased the likelihood that respondents reported discussing their decision 1-month later. Stage Three of the research program comprised an examination of augmented models (Paper 9). A test of the TPB augmented with elements from the social reaction pathway in the PWM, and extensions to these models was conducted to explore whether people’s registering (N = 339) and discussing (N = 315) decisions are explained via a reasoned (intention) and/or social reaction (willingness) pathway. Results suggested that people’s decisions to communicate their organ donation wishes may be better explained via the reasoned pathway, particularly for registering consent; however, discussing also involves reactive elements. Overall, the current research program represents an important step toward clarifying the relationship between people’s positive organ donation attitudes but low rates of organ donation and communication behaviours. Support has been demonstrated for the use of extensions to two complementary theories, the TPB and PWM, which can inform future research aiming to explicate further the organ donation attitude-behaviour relationship. The focus on a range of organ donation behaviours enables the identification of key targets for future interventions encouraging people’s posthumous and living donation decisions, and communication of their organ donation preference.

The influence of travel time and size of shopping center towards the frequencies of visiting customers in shopping centers in surabaya

Visiting a modern shopping center is becoming vital in our society nowadays. The fast growth of shopping center, transportation system, and modern vehicles has given more choices for consumers in shopping. Although there are many reasons for the consumers in visiting the shopping center, the influence of travel time and size of shopping center are important things to be considered towards the frequencies of visiting customers in shopping centers. A survey to the customers of three major shopping centers in Surabaya has been conducted to evaluate the Ellwood’s model and Huff’s model. A new exponent value N of 0.48 and n of 0.50 has been found from the Ellwood’s model, while a coefficient of 0.267 and an add value of 0.245 have been found from the Huff’s model.