Wind speed measurements of land-falling tropical cyclones using SWIRLnet, a portable anemometer network

Wind speed measurement systems are sparse in the tropical regions of Australia. Given this, tropical cyclone wind speeds impacting communities are seldom measured and often only ‘guestimated’ by analysing the extent of damage to structures. In an attempt to overcome this dearth of data, a re-locatable network of anemometers to be deployed prior to tropical cyclone landfall is currently being developed. This paper discusses design criteria of the network’s tripods and tie down system, proposed deployment of the anemometers, instrumentation and data logging. Preliminary assessment of the anemometer response indicates a reliable system for measuring the spectral component of wind with frequencies of approximately 1 Hz. This system limitation highlights an important difference between the capabilities of modern instrumentation and that of the Dines anemometer (around 0.2 seconds) that was used to develop much of the design criteria within the Australian building code and wind loading standard.

Comparison of block and event-related experimental designs in diffusion-weighted functional MRI

PURPOSE To compare diffusion-weighted functional magnetic resonance imaging (DfMRI), a novel alternative to the blood oxygenation level-dependent (BOLD) contrast, in a functional MRI experiment. MATERIALS AND METHODS Nine participants viewed contrast reversing (7.5 Hz) black-and-white checkerboard stimuli using block and event-related paradigms. DfMRI (b = 1800 mm/s2 ) and BOLD sequences were acquired. Four parameters describing the observed signal were assessed: percent signal change, spatial extent of the activation, the Euclidean distance between peak voxel locations, and the time-to-peak of the best fitting impulse response for different paradigms and sequences. RESULTS The BOLD conditions showed a higher percent signal change relative to DfMRI; however, event-related DfMRI showed the strongest group activation (t = 21.23, P < 0.0005). Activation was more diffuse and spatially closer to the BOLD response for DfMRI when the block design was used. DfMRIevent showed the shortest TTP (4.4 +/- 0.88 sec). CONCLUSION The hemodynamic contribution to DfMRI may increase with the use of block designs.

Shear capacities of rivet fastened Rectangular Hollow Flange Channel Beams

The intermittently rivet fastened Rectangular Hollow Flange Channel Beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange beams. It is a monosymmetric channel section made by intermittently rivet fastening two torsionally rigid rectangular hollow flanges to a web plate. This method will allow the development of optimum sections by choosing appropriate combinations of web and flange plate widths and thicknesses. RHFCBs can be commonly used as flexural members in buildings. Many experimental and numerical studies have been carried out in the past to investigate the shear behaviour of lipped channel beams. However, no research has been undertaken on the shear behaviour of rivet fastened RHFCBs. Therefore a detailed experimental study involving 19 shear tests was undertaken to investigate the shear behaviour and capacities of rivet fastened RHFCBs. Simply supported test specimens of RHFCB with aspect ratios of 1.0 and 1.5 were loaded at mid-span until failure. Comparison of experimental results with corresponding predictions from the current Australian cold-formed steel design rules showed that the current design rules are very conservative for the shear design of rivet fastened RHFCBs. Significant improvements to web shear buckling occurred due to the presence of rectangular hollow flanges while considerable post-buckling strength was also observed. Appropriate improvements have been proposed for the design rules of shear strength of rivet fastened RHFCBs within the Direct Strength Method format. This paper presents the details of this study and the results.

Applying academagogy : the transference of an organised heuristic teaching approach to the digital realm

Much has been written about transferring class materials and teaching techniques to digital platforms, but less has been written about applying heuristic organizing constructs in the same manner. With the transformation of learning ecologies over the past decades as well as requirements to adjust to constantly shifting digital tools and environments, the challenges for learning facilitators are to readily adapt and change, as well as to engage a changing learner demographic. However, most importantly is to engage most effectively with learners in these online environments. This article reviews the existing literature in the heuristic construct of academagogy [1] and applies a case study methodology to discussion of the first application of academagogy to the online delivery of an undergraduate design unit. Through a focus on effective teaching and learning techniques, the transfer from face-to-face (f2f) to the digital realm is explored through four main focal points: Tools for teaching, teaching and learning, communicating with students, and effective teaching methods. These four focal points are then used to discuss ways to meet the challenges of teaching online including how they create new dimensions in teaching practice and how the digital experience changes learning experiences. The article concludes with reflection and consolidation of the similarities and differences between the face-to-face and digital deliveries, and by suggesting changes to the academagogic heuristic to enable its use more easily in a digital space.

BIM for sustainable whole-of-life transport infrastructure asset management

The US National Institute of Standards and Technology (NIST) showed that, in 2004, owners and operations managers bore two thirds of the total industry cost burden from inadequate interoperability in construction projects from inception to operation, amounting to USD10.6 billion. Building Information Modelling (BIM) and similar tools were identified by Engineers Australia in 2005 as potential instruments to significantly reduce this sum, which in Australia could amount to total industry-wide cost burden of AUD12 billion. Public sector road authorities in Australia have a key responsibility in driving initiatives to reduce greenhouse gas emissions from the construction and operations of transport infrastructure. However, as previous research has shown the Environmental Impact Assessment process, typically used for project approvals and permitting based on project designs available at the consent stage, lacks Key Performance Indicators (KPIs) that include long-term impact factors and transfer of information throughout the project life cycle. In the building construction industry, BIM is widely used to model sustainability KPIs such as energy consumption, and integrated with facility management systems. This paper proposes that a similar use of BIM in early design phases of transport infrastructure could provide: (i) productivity gains through improved interoperability and documentation; (ii) the opportunity to carry out detailed cost-benefit analyses leading to significant operational cost savings; (iii) coordinated planning of street and highway lighting with other energy and environmental considerations; iv) measurable KPIs that include long-term impact factors which are transferable throughout the project life cycle; and (v) the opportunity for integrating design documentation with sustainability whole-of-life targets.

Climbing the design ladder : step by step

This research presents findings of a research project where the first author worked with a small to medium sized enterprise (SME) manufacturing company in order to integrate design at a strategic level within the company. This study aims to identify the changes experienced in the participating company while shifting the perspective of design from a product focus towards a strategic focus. Staff interviews at two points in time and a reflective journal were used as data sources within an action research methodology. A shift in the perspective of design was noted in three cultural changes within the firm over time: a focus on long term as well as short term outcomes, on indirect as well as direct value and on intangible as well as tangible benefits. These three components are proposed as ‘cultural stepping stones’ that describe how a company transitions from an exclusively product- focused utilisation of design, to a process-level application of design. Implications of this research are provided as considerations for businesses that are attempting to facilitate a similar transformation in the future.

Making space to learn : leading collaborative classroom design

Design principles for learning spaces for 21st century learning emphasise flexibility and collaboration. Yet it is rare in Australian schools for school leaders to invite students and teachers to collaborate in the design process or to prepare them for the transition into innovative physical learning spaces that are often designed to challenge and change existing learning habits. This article presents a qualitative case study of how one primary school leader led a successful transition for a teacher and her students by inviting them to design their future physical learning space and reconstruct their pedagogic relationships. This article analyses her leadership practices drawing from literature in the learning space, student voice and leadership fields to consider the benefits and challenges experienced by the collaborators when making space to learn.

Emerging Opportunities for "Design Thinking" to Deliver Sustainable Solutions in the Built Environment

In the built environment sector, a range of innovations are delivering environmental improvements with mixed success worldwide. The authors of this paper argue that a more “disruptive” form of innovation is needed to bring about significant and systemic change within the sector. Critical to this transition is the development of new behaviours and values. In particular, built environment professionals need to become active change agents in cultivating these new behaviours and values through the development of collaborative visions, scenarios, practices, and ideas. This paper identifies and discusses the critical role that design (in its broadest sense) can play in this process. Drawing on a comprehensive review of literature, the authors highlight a number of transformational opportunities for cross professional learning and sharing between design and built environment disciplines in achieving environmental innovation (eco-innovation). The paper also considers several design-based concepts that have a potential application in the built environment sector including: design thinking, social innovation (human-centered), and disruptive innovation (transformational) approaches. The research findings will assist in building the capabilities of designers and innovators to create sustainable solutions to global problems, and in supporting the social diffusion of systems-changing ideas in the built environment sector.

Value management in design planning : a systems-based framework for multi-disciplinary team involvement

This thesis investigates the Value Management processes used by construction project clients that effects project team involvement in VM workshops during the design stage of the projects. It is based on five case studies of the Malaysian international airport construction project packages. The focus of the research is on how issues related to infrastructure design that can improve construction processes on-site are being identified, analysed and resolved through multi-disciplinary team participation. The degrees of interaction, diversity of visualisation aids, certain cultural dimensions and the system thinking approach are found to have significant influence in maximizing participation among project team members during the entire VM workshop process.

BIM-based lifecycle planning and specifications for sustainable cities of the future: A conceptual approach

Annually, several million tonnes of waste are produced from reworks, demolition, and use of substandard materials. Building Information Modelling (BIM), a digital representation of facilities and their constituent data, is a viable means of addressing some concerns about the impacts of these processes. BIM functionalities can be extended and combined with rich building information from specifications and product libraries, for efficient, streamlined design and construction. This paper conceptualises a framework for BIM-knowledge transfer from advanced economies for adaptation and use in urban development works in developing nations using the Sydney Down Under and Lagos Eko Atlantic projects as reference points. We present a scenario that highlights BIM-based lifecycle planning/specifications as agents of sustainable construction (in terms of cost and time) crucial to the quality of as-built data from early on in city development. We show how, through the use of BIM, city planners in developing nations can avoid high, retrospective (and sometimes wasteful) maintenance costs and leapfrog infrastructure management standards of advanced economies. Finally, this paper illustrates how BIM can address concerns about economic sustainability during city development in developing countries by enriching model objects with specification information sourced from a product library.

Experimental and numerical study of polymeric foam efficacy in portable water filled barriers

Portable, water filled road safety barriers are used to provide protection and reduce the potential hazard due to errant vehicles in areas where the road conditions change frequently (e.g. near road work sites). As part of an effort to reduce excessive working widths typical of these systems, a study was conducted to assess the effectiveness of introducing polymeric foam filled panels into the design. Surrogate impact tests of a design typical of such as barrier system were conducted utilising a pneumatically powered horizontal impact testing machine up to impact energies of 7.40 kJ. Results of these tests are utilised to examine the barrier behaviour, in addition to being used to validate a couple FE/SPH model of the barrier system. Once validated, the FE/SPH model it utilised as the basis for a parametric study into the efficacy and effects of the inclusion of polymeric foam filled panels on the performance of portable water filled road safety barriers. It was found that extruded polystyrene foam functioned well, with a greater thickness of the foam panel significantly reducing the impacting body velocity as the barrier began to translate.

The lily, client and measure of Bruno Taut’s Glashaus

The Glashaus is considered a significant exemplar of early modernist architecture and is generally accepted as having had Expressionist origins. However, current research has revealed that the design origins of this important building are not fully understood. While the historical record acknowledges the contributions of the bohemian poet Paul Scheerbart and the art critic Adolf Behne, the role of the Glashaus’ architect, Bruno Taut, has been moderated. In an attempt to rectify this situation this article proposes that the design origins of the Glashaus can be found in a strong architect-client interaction. It is argued that the Glashaus’ client, the Deutsche Luxfer Prismen Syndikat under the directorship of Frederick Keppler, exerted a significant influence on its design. In order to showcase the glazed products of Luxfer in the best manner possible, Keppler insisted that the design feature a glazed dome, electric lighting, a fountain as well as a cascade. Given the detailed stipulations of this brief, Taut had few options other than to offer interpretations of precedent that derived from the Victoria regia lily and Gothic proportioning. By expounding this architect-client relationship, this article expands our understanding of the Glashaus, and reinvigorates our understanding of this important early example of modern architecture.

Sweden of the Sagas

In this paper, I discuss the representation of Sweden and Swedes in the Íslendingasögur, with an emphasis on identifying patterns across the works, both in terms of narrative structure and content. The aim in doing so is to shed light on modes of representing non-Icelanders in the Íslendingasögur, as well as on medieval Icelandic conceptions of Sweden as a distinct region within Scandinavia. I also aim here to add to a longer-term project that examines the place of foreign visitors to Iceland in the saga corpus more generally. As the scope of this paper is limited to Swedish characters, I am cautious about drawing broad conclusions about their representation – observations given here will need to be framed by a wider study, and one that reads for the characterisation of Swedes in the context both of other genres of saga literature and representations of characters from other regions beside Sweden. However, it is clear that some similarities exist in saga episodes involving Swedish characters: in four of the Íslendingasögur, Swedes are given roles as intruders or outsiders who threaten the community of the saga and whose deaths bring about a change in the for- tunes of their killers.

Graph theory based representation of building information models for access control applications

Building information models are increasingly being utilised for facility management of large facilities such as critical infrastructures. In such environments, it is valuable to utilise the vast amount of data contained within the building information models to improve access control administration. The use of building information models in access control scenarios can provide 3D visualisation of buildings as well as many other advantages such as automation of essential tasks including path finding, consistency detection, and accessibility verification. However, there is no mathematical model for building information models that can be used to describe and compute these functions. In this paper, we show how graph theory can be utilised as a representation language of building information models and the proposed security related functions. This graph-theoretic representation allows for mathematically representing building information models and performing computations using these functions.