The impact of sulphur content of diesel fuel on ultrafine particle formation

Early this year the Australian Department of Environment and Heritage commissioned a desktop literature review with a focus on ultrafine particles including analysis of health impacts of the particles as well as the impact of sulphur content of diesel fuel on ultrafine particle emission. This paper summarizes the findings of the report on the link between the sulphur content of diesel fuels and the number of ultrafine particles in diesel emissions. The literature search on this topic resulted in over 150 publications. The majority of these publications, although investigating different aspects of the influence of fuel sulphur level on diesel vehicle emissions, were not directly concerned with ultrafine particle emissions. A specific focus of the paper is on: ----- ----- summary of state of knowledge established by the review, and ----- ----- summary of recommendations on the research priorities for Australia to address the information gaps for this issue, and on the appropriate management responses.

Sharing with Creative Commons : a business model for content creators

Creative Commons (CC) is often seen as a social movement, dismissed by critics as a tool for hobbyists or academics who do not sell their creations to make a living. However, this paper argues that the licensing of creative copyright works under a CC licence does not preclude commercial gain. If used wisely, CC licences can be a useful tool for creators in their quest for commercial success. In particular, this paper argues that the sharing of creative works online under a CC licence allows creators to circumvent traditional distribution channels dominated by content intermediaries, whilst maintaining a level of control over their copyright works (i.e. explicitly reserving some rights but not all rights). This will be illustrated by case studies on how CC is being used by content creators and intermediaries respectively, and how successful their respective methods are in harnessing this tool.

Early childhood teachers' mathematical content knowledge

The process of becoming numerate begins in the early years. According to Vygotskian theory (1978), teachers are More Knowledgeable Others who provide and support learning experiences that influence children’s mathematical learning. This paper reports on research that investigates three early childhood teachers mathematics content knowledge. An exploratory, single case study utilised data collected from interviews, and email correspondence to investigate the teachers’ mathematics content knowledge. The data was reviewed according to three analytical strategies: content analysis, pattern matching, and comparative analysis. Findings indicated there was variation in teachers’ content knowledge across the five mathematical strands and that teachers might not demonstrate the depth of content knowledge that is expected of four year specially trained early years’ teachers. A significant factor that appeared to influence these teachers’ content knowledge was their teaching experience. Therefore, an avenue for future research is the investigation of factors that influence teachers’ content numeracy knowledge.

Shear tests of Litesteel beams with web openings

This paper presents the details of experimental studies on the shear strength of a recently developed, cold-formed steel beam known as LiteSteel Beam (LSB) with web openings. The innovative LSB sections have the beneficial characteristics of torsionally rigid closed rectangular flanges combined with economical fabrication processes from a single strip of high strength steel. They combine the stability of hot-rolled steel sections with the high strength to weight ratio of conventional cold-formed steel sections. The LSB sections are commonly used as flexural members in the building industry. Current practice in flooring systems is to include openings in the web element of floor joists or bearers so that building services can be located within them. Shear behaviour of LSBs with web openings is more complicated while their shear strengths are considerably reduced by the presence of web openings. However, limited research has been undertaken on the shear behaviour and strength of LSBs with web openings. Therefore a detailed experimental study involving 26 shear tests was undertaken to investigate the shear behaviour and strength of different LSB sections. Simply supported test specimens of LSBs with an aspect ratio of 1.5 were loaded at midspan until failure. This paper presents the details of this experimental study and the results. Experimental results showed that the current design rules in cold-formed steel structures design codes (AS/NZS 4600) [1] are very conservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear strength of LSBs with web openings based on experimental results from this study.

Shear strength of LiteSteel beams with web openings

This paper presents the details of numerical studies on the shear strength of a recently devel-oped, cold-formed steel channel beam known as LiteSteel Beam (LSB) with web openings. The LSB sections are commonly used as floor joists and bearers in residential, industrial and commercial buildings. In these ap-plications they often include web openings for the purpose of locating services. This has raised concerns over the shear capacity of LSB floor joists and bearers. Therefore experimental and numerical studies were under-taken to investigate the shear behavior and strength of LSBs with web openings. In this research, finite ele-ment models of LSBs with web openings in shear were developed to simulate the shear behavior of LSBs. It was found that currently available design equations are conservative or unconservative for the shear design of LSBs with web openings. Improved design equations have been proposed for the shear capacity of LSBs with web openings based on both experimental and numerical study results.

Overview of the INEX 2010 XML mining track : clustering and classification of XML documents

The XML Document Mining track was launched for exploring two main ideas: (1) identifying key problems and new challenges of the emerging field of mining semi-structured documents, and (2) studying and assessing the potential of Machine Learning (ML) techniques for dealing with generic ML tasks in the structured domain, i.e., classification and clustering of semi-structured documents. This track has run for six editions during INEX 2005, 2006, 2007, 2008, 2009 and 2010. The first five editions have been summarized in previous editions and we focus here on the 2010 edition. INEX 2010 included two tasks in the XML Mining track: (1) unsupervised clustering task and (2) semi-supervised classification task where documents are organized in a graph. The clustering task requires the participants to group the documents into clusters without any knowledge of category labels using an unsupervised learning algorithm. On the other hand, the classification task requires the participants to label the documents in the dataset into known categories using a supervised learning algorithm and a training set. This report gives the details of clustering and classification tasks.

Spatial and temporal variations of mechanical properties and mineral content of the external callus during bone healing

After bone fracture, various cellular activities lead to the formation of different tissue types, which form the basis for the process of secondary bone healing. Although these tissues have been quantified by histology, their material properties are not well understood. Thus, the aim of this study is to correlate the spatial and temporal variations in the mineral content and the nanoindentation modulus of the callus formed via intramembranous ossification over the course of bone healing. Midshaft tibial samples from a sheep osteotomy model at time points of 2, 3, 6 and 9 weeks were employed. PMMA embedded blocks were used for quantitative back scattered electron imaging and nanoindentation of the newly formed periosteal callus near the cortex. The resulting indentation modulus maps show the heterogeneity in the modulus in the selected regions of the callus. The indentation modulus of the embedded callus is about 6 GPa at the early stage. At later stages of mineralization, the average indentation modulus reaches 14 GPa. There is a slight decrease in average indentation modulus in regions distant to the cortex, probably due to remodelling of the peripheral callus. The spatial and temporal distribution of mineral content in the callus tissue also illustrates the ongoing remodelling process observed from histological analysis. Most interestingly the average indentation modulus, even at 9 weeks, remains as low as 13 GPa, which is roughly 60% of that for cortical sheep bone. The decreased indentation modulus in the callus compared to cortex is due to the lower average mineral content and may be perhaps also due to the properties of the organic matrix which might be different from normal bone.

Integrated literacies : every online player wins a prize

QUT Library’s model of learning support brings together academic literacy (study skills) and information literacy (research skills). The blended portfolio enables holistic planning and development, seamless services, connected learning resources and more authentic curriculum-embedded education. The model reinforces the Library’s strategic focus on learning service innovation and active engagement in teaching and learning. ----- ----- ----- The online learning strategy is a critical component of the broader literacies framework. This strategy unifies new and existing online resources (e.g.: Pilot, QUT cite|write and IFN001|AIRS Online) to augment learner capability. Across the suite, prudent application of emerging technologies with visual communications and learning design delivers a wide range of adaptive study tools. Separately and together, these resources meet the learning needs and styles of a diverse cohort providing positive and individual learning opportunities. Deliberate articulation with strategic directions regarding First Year Experience, assessment, retention and curriculum alignment assures that the Library’s initiatives move in step with institutional objectives relating to enhancing the student experience and flexible blended learning. ----- ----- ----- The release of Studywell in 2010 emphasises the continuing commitment to blended literacy education. Targeting undergraduate learners (particularly 1st year/transition), this online environment provides 24/7 access to practical study and research tools. Studywell’s design and application of technology creates a “discovery infrastructure” [1] which facilitates greater self-directed learning and interaction with content. ----- ----- ----- This paper presents QUT Library’s online learning strategy within the context of the parent “integrated literacies” framework. Highlighting the key online learning resources, the paper describes the inter-relationships between those resources to develop complementary literacies. The paper details broad aspects of the overarching learning and study support framework as well as the online strategy, including strategic positioning, quality and evaluation processes, maintenance, development, implementation, and client engagement and satisfaction with the learning resources.

Trust and reputation management in web-based social network

know personally. They also communicate with other members of the network who are the friends of their friends and may be friends of their friend’s network. They share their experiences and opinions within the social network about an item which may be a product or service. The user faces the problem of evaluating trust in a service or service provider before making a choice. Opinions, reputations and ecommendations will influence users' choice and usage of online resources. Recommendations may be received through a chain of friends of friends, so the problem for the user is to be able to evaluate various types of trust recommendations and reputations. This opinion or ecommendation has a great influence to choose to use or enjoy the item by the other user of the community. Users share information on the level of trust they explicitly assign to other users. This trust can be used to determine while taking decision based on any recommendation. In case of the absence of direct connection of the recommender user, propagated trust could be useful.

Local adjustment and global adaptation of control periods for QoC management of control systems

Linking real-time schedulability directly to the Quality of Control (QoC), the ultimate goal of a control system, a hierarchical feedback QoC management framework with the Fixed Priority (FP) and the Earliest-Deadline-First (EDF) policies as plug-ins is proposed in this paper for real-time control systems with multiple control tasks. It uses a task decomposition model for continuous QoC evaluation even in overload conditions, and then employs heuristic rules to adjust the period of each of the control tasks for QoC improvement. If the total requested workload exceeds the desired value, global adaptation of control periods is triggered for workload maintenance. A sufficient stability condition is derived for a class of control systems with delay and period switching of the heuristic rules. Examples are given to demonstrate the proposed approach.

Fast content-based file type identification

Digital forensic examiners often need to identify the type of a file or file fragment based only on the content of the file. Content-based file type identification schemes typically use a byte frequency distribution with statistical machine learning to classify file types. Most algorithms analyze the entire file content to obtain the byte frequency distribution, a technique that is inefficient and time consuming. This paper proposes two techniques for reducing the classification time. The first technique selects a subset of features based on the frequency of occurrence. The second speeds classification by sampling several blocks from the file. Experimental results demonstrate that up to a fifteen-fold reduction in file size analysis time can be achieved with limited impact on accuracy.

Participation and e-democracy how to utilize web 2.0 for policy decision-making

This paper investigates in how to utilize ICT and Web 2.0 technologies and e-democracy software for policy decision-making. It introduces a cutting edge decision-making system that integrates the practice of e-petitions, e-consultation, e-rulemaking, e-voting, and proxy voting. The paper demonstrates how under precondition of direct democracy through the use this system the collective intelligence (CI) of a population would be gathered and used throughout the policy process.

Deliberation and collaboration in the policy process : a Web 2.0 approach

This paper is a summary of a PhD thesis proposal. It will explore how the Web 2.0 platform could be applied to enable and facilitate the large-scale participation, deliberation and collaboration of both governmental and non-governmental actors in an ICT supported policy process. The paper will introduce a new democratic theory and a Web 2.0 based e-democracy platform, and demonstrate how different actors would use the platform to develop and justify policy issues.

Towards a relational theory of copyright law

This research provides a systematic and theoretical analysis of the digital challenges to the established exclusive regime of the economic rights enjoyed by authors (and related rightholders) under the law of copyright. Accordingly, this research has developed a relational theory of authorship and a relational approach to copyright, contending that the regulatory emphasis of copyright law should focus on the facilitation of the dynamic relations between the culture, the creators, the future creators, the users and the public, rather than the allocation of resources in a static world. In this networked digital world, the creative works and contents have become increasingly vital for people to engage in creativity and cultural innovation, and for the evolution of the economy. Hence, it is argued that today copyright owners, as content holders, have certain obligations to make their works accessible and available to the public under fair conditions. This research sets forward a number of recommendations for the reform of the current copyright system.