Contracts

Contracting essentially involves an agreement between two parties in relation to a particular matter. When defined in this way, contracting has been occurring as a social practice since humans first bartered and conducted trade, and should be understood as both an economic as well as a social transaction. This entry explains key aspects of the sociology While contracting is commonly understood to be a market based transaction, Polyani famously argued that for most of recorded history commercial transactions were in fact secondary to social relationships. In other words, whenever economic transactions occurred, they were always in the context of reciprocal social relationships. Historically the primary mode of exchange may well have been based on social exchange and reciprocity, however with the rise of extensive industrialization in the 18th Century, the primary mode of exchange has led to more of a market based mode of exchange in developed countries, with the focus more about the economic transaction. As an agreement between two entities, contracting is an essential element to economic systems as it is the basis of most transactions, whether the agreement is verbal or written, explicit or implied. Contracting is thus a pervasive activity in our society, particularly between organizations, although individuals also engage in contracting. Typically, when discussing contracting, authors have either focused on the nature of the agreement itself, or on the governance arrangements in place to carry out the agreement.

The recovery concept and crisis intervention : time for a revolution in the realm of acute psychiatric care

“Mental illness is a tough illness to survive, it is incurable but manageable. Living with the illness when at its full potency can disrupt your life at any moment.” Intensive care for patients experiencing acute psychiatric distress is an essential yet complex part of mental health services as a whole system. Psychiatric intensive care units remain a source of controversy; despite promising developments to health services incorporating recovery goals and processes outlined by people with a mental illness themselves. In past decades changes in the provision of mental health services have focused on the restoration of a meaningful and empowered life with choice and hope as a defining attribute of recovery. Yet, what does recovery mean and how are recovery principles accomplished in psychiatric intensive care arrangements for someone experiencing acute psychiatric distress?

The role of the cultural intermediary within professional participatory communication : lessons from ABC Pool

As media institutions are encouraged to explore new production methodologies in the current economic crisis, they align with Schumpeter’s creative destruction provocation by exhibiting user-led political, organisation and socio-technical innovations. This paper highlights the significance of the cultural intermediary within the innovative, co-creative production arrangements for cultural artefacts by media professionals in institutional online communities. An institutional online community is defined as one that is housed, resourced and governed by commercial or non- commercial institutions and is not independently facilitated. Web 2.0 technologies have mobilised collaborative peer production activities for online content creation and professional media institutions face challenges in engaging participatory audiences in practices that are beneficial for all concerned stakeholders. The interests of those stakeholders often do not align, highlighting the need for an intermediary role that understands and translates the norms, rhetoric tropes and day-to-day activities between the individuals engaging in participatory communication activities for successful negotiation within the production process. This paper specifically explores the participatory relationship between the public service broadcaster (PSB), the Australian Broadcasting Corporation (ABC) and one of its online communities, ABC Pool (www.abc.net.au/pool). ABC Pool is an online platform developed and resourced by the ABC to encourage co-creation between audience members engaging in the production of user-generated content (UGC) and the professional producers housed within the ABC Radio Division. This empirical research emerges from a three-year research project where I employed an ethnographic action research methodology and was embedded at the ABC as the community manager of ABC Pool. In participatory communication environments, users favour meritocratic heterarchical governance over traditional institutional hierarchical systems (Malaby 2009). A reputation environment based on meritocracy requires an intermediary to identify the stakeholders, understand their interests and communicate effectively between them to negotiate successful production outcomes (Bruns 2008; Banks 2009). The community manager generally occupies this role, however it has emerged that other institutional production environments also employ an intermediary role under alternative monikers(Hutchinson 2012). A useful umbrella term to encompass the myriad of roles within this space is the cultural intermediary. The ABC has experimented with three institutional online community governance models that engage in cultural intermediation in differing decentralised capacities. The first and most closed is a single point of contact model where one cultural intermediary controls all of the communication of the participatory project. The second is a model of multiple cultural intermediaries engaging in communication between the institutional online community stakeholders simultaneously. The third is most open yet problematic as it promotes and empowers community participants to the level of cultural intermediaries. This paper uses the ABC Pool case study to highlight the differing levels of openness within cultural intermediation during the co-creative production process of a cultural artifact.

Engineering electrodeposited ZnO films and their memristive switching performance

We report the influence of zinc oxide (ZnO) seed layers on the performance of ZnO-based memristive devices fabricated using an electrodeposition approach. The memristive element is based on a sandwich structure using Ag and Pt electrodes. The ZnO seed layer is employed to tune the morphology of the electrodeposited ZnO films in order to increase the grain boundary density as well as construct highly ordered arrangements of grain boundaries. Additionally, the seed layer also assists in optimizing the concentration of oxygen vacancies in the films. The fabricated devices exhibit memristive switching behaviour with symmetrical and asymmetrical hysteresis loops in the absence and presence of ZnO seed layers, respectively. A modest concentration of oxygen vacancy in electrodeposited ZnO films as well as an increase in the ordered arrangement of grain boundaries leads to higher switching ratios in Ag/ZnO/Pt devices.

The health effects of temperature : current estimates, future projections, and adaptation strategies

Climate change is expected to be one of the biggest global health threats in the 21st century. In response to changes in climate and associated extreme events, public health adaptation has become imperative. This thesis examined several key issues in this emerging research field. The thesis aimed to identify the climate-health (particularly temperature-health) relationships, then develop quantitative models that can be used to project future health impacts of climate change, and therefore help formulate adaptation strategies for dealing with climate-related health risks and reducing vulnerability. The research questions addressed by this thesis were: (1) What are the barriers to public health adaptation to climate change? What are the research priorities in this emerging field? (2) What models and frameworks can be used to project future temperature-related mortality under different climate change scenarios? (3) What is the actual burden of temperature-related mortality? What are the impacts of climate change on future burden of disease? and (4) Can we develop public health adaptation strategies to manage the health effects of temperature in response to climate change? Using a literature review, I discussed how public health organisations should implement and manage the process of planned adaptation. This review showed that public health adaptation can operate at two levels: building adaptive capacity and implementing adaptation actions. However, there are constraints and barriers to adaptation arising from uncertainty, cost, technologic limits, institutional arrangements, deficits of social capital, and individual perception of risks. The opportunities for planning and implementing public health adaptation are reliant on effective strategies to overcome likely barriers. I proposed that high priorities should be given to multidisciplinary research on the assessment of potential health effects of climate change, projections of future health impacts under different climate and socio-economic scenarios, identification of health cobenefits of climate change policies, and evaluation of cost-effective public health adaptation options. Heat-related mortality is the most direct and highly-significant potential climate change impact on human health. I thus conducted a systematic review of research and methods for projecting future heat-related mortality under different climate change scenarios. The review showed that climate change is likely to result in a substantial increase in heatrelated mortality. Projecting heat-related mortality requires understanding of historical temperature-mortality relationships, and consideration of future changes in climate, population and acclimatisation. Further research is needed to provide a stronger theoretical framework for mortality projections, including a better understanding of socioeconomic development, adaptation strategies, land-use patterns, air pollution and mortality displacement. Most previous studies were designed to examine temperature-related excess deaths or mortality risks. However, if most temperature-related deaths occur in the very elderly who had only a short life expectancy, then the burden of temperature on mortality would have less public health importance. To guide policy decisions and resource allocation, it is desirable to know the actual burden of temperature-related mortality. To achieve this, I used years of life lost to provide a new measure of health effects of temperature. I conducted a time-series analysis to estimate years of life lost associated with changes in season and temperature in Brisbane, Australia. I also projected the future temperaturerelated years of life lost attributable to climate change. This study showed that the association between temperature and years of life lost was U-shaped, with increased years of life lost on cold and hot days. The temperature-related years of life lost will worsen greatly if future climate change goes beyond a 2 °C increase and without any adaptation to higher temperatures. The excess mortality during prolonged extreme temperatures is often greater than the predicted using smoothed temperature-mortality association. This is because sustained period of extreme temperatures produce an extra effect beyond that predicted by daily temperatures. To better estimate the burden of extreme temperatures, I estimated their effects on years of life lost due to cardiovascular disease using data from Brisbane, Australia. The results showed that the association between daily mean temperature and years of life lost due to cardiovascular disease was U-shaped, with the lowest years of life lost at 24 °C (the 75th percentile of daily mean temperature in Brisbane), rising progressively as temperatures become hotter or colder. There were significant added effects of heat waves, but no added effects of cold spells. Finally, public health adaptation to hot weather is necessary and pressing. I discussed how to manage the health effects of temperature, especially with the context of climate change. Strategies to minimise the health effects of high temperatures and climate change can fall into two categories: reducing the heat exposure and managing the health effects of high temperatures. However, policy decisions need information on specific adaptations, together with their expected costs and benefits. Therefore, more research is needed to evaluate cost-effective adaptation options. In summary, this thesis adds to the large body of literature on the impacts of temperature and climate change on human health. It improves our understanding of the temperaturehealth relationship, and how this relationship will change as temperatures increase. Although the research is limited to one city, which restricts the generalisability of the findings, the methods and approaches developed in this thesis will be useful to other researchers studying temperature-health relationships and climate change impacts. The results may be helpful for decision-makers who develop public health adaptation strategies to minimise the health effects of extreme temperatures and climate change.

Finite element analysis of hollow flange beams with web stiffeners

A new cold-formed and resistance welded section known as the Hollow Flange Beam (HFB) has been developed recently in Australia. In contrast to the common lateral torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral distortional buckling mode of failure involving lateral deflection, twist, and cross-section change due to web distortion. This lateral distortional buckling behavior has been shown to cause significant reduction of the available flexural capacity of HFBs. An investigation using finite element analyses and large scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the finite element model and analytical results. The experimental procedure and results are outlined in a companion paper at this conference.

Buckling experiments on hollow flange beams with web stiffeners

A new cold-formed and resistance welded section known as the Hollow Flange Beam (HFB) has been developed recently in Australia. In contrast to the common lateral torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral distortional buckling mode of failure involving lateral deflection, twist and cross-section change due to web distortion. This lateral distortional buckling behaviour has been shown to cause significant reduction of the available flexural strength of HFBs. An investigation using finite element analyses and large scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the experimental investigation, the results, and the final stiffener arrangement whereas the details of the finite element analyses are presented in a companion paper at this conference.

Finite-element analysis of hollow flange beams with web stiffeners

A new cold-formed and resistance-welded section known as the hollow flange beam (HFB) has been developed recently in Australia. In contrast to the common lateral-torsional buckling mode of I-beams, this unique section comprising two stiff triangular flanges and a slender web is susceptible to a lateral-distortional buckling mode of failure involving lateral deflection, twist, and cross-section change due to web distortion. This lateral-distortional buckling behavior has been shown to cause significant reduction of the available flexural capacity of HFBs. An investigation using finite-element analyses and large-scale experiments was carried out into the use of transverse web plate stiffeners to improve the lateral buckling capacity of HFBs. This paper presents the details of the finite-element model and analytical results. The experimental procedure and results are outlined in a companion paper.

Buckling experiments on hollow flange beams with web stiffeners

The hollow flange beam (HFB) is a new cold-formed and resistance-welded section developed in Australia. Due to its unique geometry comprising two stiff triangular flanges and a slender web, the HFB is susceptible to a lateral-distortional buckling mode of failure involving web distortion. Investigation using finite-element analyses showed that the use of transverse web plate stiffeners effectively eliminated lateral-distortional buckling of HFBs and thus any associated reduction in flexural capacity. A detailed experimental investigation was then carried out to validate the results from the finite-element analysis and to improve the stiffener configuration further. This led to the development of a special stiffener that is screw-fastened to the flanges on alternate sides of the web. This paper presents the details of the experimental investigations, the results, and the final stiffener arrangement whereas the details of the finite-element analyses are presented in a companion paper.

Flexural capacity of hollow flange beams

The hollow flange beam (HFB) is a unique cold-formed steel section developed in Australia for use as a flexural member. Research has identified that the HFB section's flexural capacity for intermediate span members is limited by lateral distortional buckling, which is characterized by simultaneous lateral deflection, twist, and web distortion. This buckling behaviour is mainly due to the unique geometry of the section, comprising two torsionally stiff triangular flanges connected by a slender web. This paper presents a finite element analytical model suitable for non-linear analysis of HFB flexural members. The model includes all significant effects that may influence the ultimate capacity of such members, including material inelasticity, local buckling, member instability, web distortion, residual stresses, and geometric imperfections. It was found to accurately predict both the elastic lateral distortional buckling moments and the ultimate capacities of HFB flexural members, and was therefore used in the development of design curves and suitable design procedures.

Shear capacity of lipped channel beams with web openings : design rules and improvements

Cold-formed steel Lipped Channel Beams (LCB) with web openings are commonly used as floor joists and bearers in building structures. Shear behaviour of these beams is more complicated and their shear capacities are considerably reduced by the presence of web openings. Hence detailed numerical and experimental studies of simply supported LCBs under a mid-span load with aspect ratios of 1.0 and 1.5 were undertaken to investigate the shear behaviour and strength of LCBs with web openings. Experimental and numerical results showed that the current design rules in cold-formed steel structures design codes are very conservative. Improved design equations were therefore proposed for the shear strength of LCBs with web openings based on both experimental and numerical results. This research showed a significant reduction in shear capacities of LCBs when large web openings are included for the purpose of locating building services. A cost effective method of eliminating such detrimental effects of large circular web openings was also therefore investigated using experimental and numerical studies. For this purpose LCBS were reinforced using plate, stud, transverse and sleeve stiffeners with varying sizes and thicknesses that were welded and screw-fastened to the web of LCBs. These studies showed that plate stiffeners were the most suitable. Suitable screw-fastened plate stiffener arrangements with optimum thicknesses were then proposed for LCBs with web openings to restore their original shear capacities. This paper presents the details of finite element analyses and experiments of LCBs with web openings in shear, and the development of improved shear design rules. It then describes the experimental and numerical studies to determine the optimum plate stiffener arrangements and the results. The proposed shear design rules in this paper can be considered for inclusion in the future versions of cold-formed steel design codes.

Food and Brisbane households : dietary, social and health consequences of food insecurity

Background & Aims: Access to sufficient amounts of safe and culturally-acceptable foods is a fundamental human right. Food security exists when all people, at all times, have physical, social, and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life. Food insecurity therefore occurs when the availability or access to sufficient amounts of nutritionally-adequate, culturally-appropriate and safe foods, or, the ability to acquire such foods in socially-acceptable ways, is limited. Food insecurity may result in significant adverse effects for the individual and these outcomes may vary between adults and children. Among adults, food insecurity may be associated with overweight or obesity, poorer self-rated general health, depression, increased health-care utilisation and dietary intakes less consistent with national recommendations. Among children, food insecurity may result in poorer self or parent-reported general health, behavioural problems, lower levels of academic achievement and poor social outcomes. The majority of research investigating the potential correlates of food insecurity has been undertaken in the United States (US), where regular national screening for food insecurity is undertaken using a comprehensive multi-item measurement. In Australia, screening for food insecurity takes place on a three yearly basis via the use of a crude, single-item included in the National Health Survey (NHS). This measure has been shown to underestimate the prevalence of food insecurity by 5%. From 1995 – 2004, the prevalence of food insecurity among the Australian population remained stable at 5%. Due to the perceived low prevalence of this issue, screening for food insecurity was not undertaken in the most recent NHS. Furthermore, there are few Australian studies investigating the potential determinants of food insecurity and none investigating potential outcomes among adults and children. This study aimed to examine these issues by a) investigating the prevalence of food insecurity among households residing in disadvantaged urban areas and comparing prevalence rates estimated by the more comprehensive 18-item and 6-item United States Department of Agriculture (USDA) Food Security Survey Module (FSSM) to those estimated by the current single-item measure used for surveillance in Australia and b) investigating the potential determinants and outcomes of food insecurity, Methods: A comprehensive literature review was undertaken to investigate the potential determinants and consequences of food insecurity among developed countries. This was followed by a cross-sectional study in which 1000 households from the most disadvantaged 5% of Brisbane areas were sampled and data collected via mail-based survey (final response rate = 53%, n = 505). Data were collected for food security status, sociodemographic characteristics (household income, education, age, gender, employment status, housing tenure and living arrangements), fruit and vegetable intakes, meat and take-away consumption, presence of depressive symptoms, presence of chronic disease and body mass index (BMI) among adults. Among children, data pertaining to BMI, parent-reported general health, days away from school and activities and behavioural problems were collected. Rasch analysis was used to investigate the psychometric properties of the 18-, 10- and 6-item adaptations of the USDA-FSSM, and McNemar's test was used to investigate the difference in the prevalence of food insecurity as measured by these three adaptations compared to the current single-item measure used in Australia. Chi square and logistic regression were used to investigate the differences in dietary and health outcomes among adults and health and behavioural outcomes among children. Results were adjusted for equivalised household income and, where necessary, for indigenous status, education and family type. Results: Overall, 25% of households in these urbanised-disadvantaged areas reported experiencing food insecurity; this increased to 34% when only households with children were analysed. The current reliance on a single-item measure to screen for food insecurity may underestimate the true burden among the Australian population, as this measure was shown to significantly underestimate the prevalence of food insecurity by five percentage points. Internationally, major potential determinants of food insecurity included poverty and indicators of poverty, such as low-income, unemployment and lower levels of education. Ethnicity, age, transportation and cooking and financial skills were also found to be potential determinants of food insecurity. Among Australian adults in disadvantaged urban areas, food insecurity was associated with a three-fold increase in experiencing poorer self-rated general health and a two-to-five-fold increase in the risk of depression. Furthermore, adults from food insecure households were twoto- three times more likely to have seen a general practitioner and/or been admitted to hospital within the previous six months, compared to their food secure counterparts. Weight status and intakes of fruits, vegetables and meat were not associated with food insecurity. Among Australian households with children, those in the lowest tertile were over 16 times more likely to experience food insecurity compared to those in the highest tertile for income. After adjustment for equivalised household income, children from food insecure households were three times more likely to have missed days away from school or other activities. Furthermore, children from food insecure households displayed a two-fold increase in atypical emotions and behavioural difficulties. Conclusions: Food insecurity is an important public health issue and may contribute to the burden on the health care system through its associations with depression and increased health care utilisation among adults and behavioural and emotional problems among children. Current efforts to monitor food insecurity in Australia do not occur frequently and use a tool that may underestimate the prevalence of food insecurity. Efforts should be made to improve the regularity of screening for food insecurity via the use of a more accurate screening measure. Most of the current strategies that aim to alleviate food insecurity do not sufficiently address the issue of insufficient financial resources for acquiring food; a factor which is an important determinant of food insecurity. Programs to address this issue should be developed in collaboration with groups at higher risk of developing food insecurity and should incorporate strategies to address the issue of low income as a barrier to food acquisition.

Public policy, disaster risk management and climate change adaptation

Public policymakers are caught in a dilemma : there is a growing list of urgent issues to address, at the same time that public expenditure is being cut. Adding to this dilemma is a system of government designed in the 19th century and competing theories of policymaking dating back to the 1950s. The interlinked problems of disaster risk management and climate change adaptation are cases in point. As the climate changes, there will be more frequent, intense and/or prolonged disasters such as floods and bushfires. Clearly a well integrated whole of government response is needed, but how might this be achieved? Further, how could academic research contribute to resolving this dilemma in a way that would produce something of theoretical interest as well as practical outcomes for policymakers? These are the questions addressed by our research via a comparative analysis of the 2009 Victorian bushfires, the 2011 Perth Hills bushfires, and the 2011 Brisbane floods. Our findings suggest that there is a need to: improve community engagement and communication; refocus attention on resilience; improve interagency communication and collaboration; and, develop institutional arrangements that support continual improvement and policy learning. These findings have implications for all areas of public policy theory and practice.

Rethinking emergency management and climate adaptation policies

Emergency management and climate change adaptation will increasingly challenge all levels of government because of three main factors. First, Australia is extremely vulnerable to the impacts of climate change, particularly through the increasing frequency and/or intensity of disasters such as floods and bushfires. Second, the system of government that divides powers by function and level can often act as a barrier to a well-integrated response. Third, policymaking processes struggle to cope with such complex inter-jurisdictional issues. This paper discusses these factors and explores the nature of the challenge for Australian governments. Investigations into the 2009 Victorian bushfires, the 2011 Perth Hills bushfires, and the 2011 Brisbane floods offer an indication of the challenges ahead and it is argued that there is a need to: improve community engagement and communication; refocus attention on resilience; improve interagency communication and collaboration; and, develop institutional arrangements that support continual improvement and policy learning. These findings offer an opportunity for improving responses as well as a starting point for integrating disaster risk management and climate change adaptation policies. The paper is based on the preliminary findings of an NCCARF funded research project: The Right Tool for the Job – Achieving climate change adaptation outcomes through improved disaster management policies, planning and risk management strategies involving Griffith University and RMIT.

Efficiency and productivity of Singapore's manufacturing sector 2001-2010 : an analysis using bootstrapped truncated approach

This paper seeks to explain the lagging productivity in Singapore’s manufacturing noted in the statements of the Economic Strategies Committee Report 2010. Two methods are employed: the Malmquist productivity to measure total factor productivity (TFP) change and Simar and Wilson’s (2007) bootstrapped truncated regression approach which first derives bias-corrected efficiency estimates before being regressed against explanatory variables to help quantify sources of inefficiencies. The findings reveal that growth in total factor productivity was attributed to efficiency change with no technical progress. Sources of efficiency were attributed to quality of worker and flexible work arrangements while the use of foreign workers lowered efficiency.