274 resultados para REAL
Resumo:
Background Cervical Spinal Manipulation (CSM) is considered a high-level skill of the central nervous system because it requires bimanual coordinated rhythmical movements therefore necessitating training to achieve proficiency. The objective of the present study was to investigate the effect of real-time feedback on the performance of CSM. Methods Six postgraduate physiotherapy students attending a training workshop on Cervical Spine Manipulation Technique (CSMT) using inertial sensor derived real-time feedback participated in this study. The key variables were pre-manipulative position, angular displacement of the thrust and angular velocity of the thrust. Differences between variables before and after training were investigated using t-tests. Results There were no significant differences after training for the pre-manipulative position (rotation p = 0.549; side bending p = 0.312) or for thrust displacement (rotation p = 0.247; side bending p = 0.314). Thrust angular velocity demonstrated a significant difference following training for rotation (pre-training mean (sd) 48.9°/s (35.1); post-training mean (sd) 96.9°/s (53.9); p = 0.027) but not for side bending (p = 0.521). Conclusion Real-time feedback using an inertial sensor may be valuable in the development of specific manipulative skill. Future studies investigating manipulation could consider a randomized controlled trial using inertial sensor real time feedback compared to traditional training.
Resumo:
This paper presents the development and experimental validation of a prototype system for online estimation and compensation of wind disturbances onboard small Rotorcraft unmanned aerial systems (RUAS). The proposed approach consists of integrating a small pitot-static system onboard the vehicle and using simple but effective algorithms for estimating the wind speed in real time. The baseline flight controller has been augmented with a feed-forward term to compensate for these wind disturbances, thereby improving the flight performance of small RUAS in windy conditions. The paper also investigates the use of online airspeed measurements in a closed-loop for controlling the RUAS forward motion without the aid of a global positioning system (GPS). The results of more than 80 flights with a RUAS confirm the validity of our approach.
Resumo:
This thesis has investigated how to cluster a large number of faces within a multi-media corpus in the presence of large session variation. Quality metrics are used to select the best faces to represent a sequence of faces; and session variation modelling improves clustering performance in the presence of wide variations across videos. Findings from this thesis contribute to improving the performance of both face verification systems and the fully automated clustering of faces from a large video corpus.
Resumo:
The new furnace at the Materials Characterization by X-ray Diffraction beamline at Elettra has been designed for powder diffraction measurements at high temperature (up to 1373 K at the present state). Around the measurement region the geometry of the radiative heating element assures a negligible temperature gradient along the capillary and can accommodate either powder samples in capillary or small flat samples. A double capillary holder allows flow-through of gas in the inner sample capillary while the outer one serves as the reaction chamber. The furnace is coupled to a translating curved imaging-plate detector, allowing the collection of diffraction patterns up to 2[theta] [asymptotically equal to] 130°.
Resumo:
This symposium describes what is possible when early childhood professionals work with designers to develop a vision for an exemplary early childhood centre with a focus on Education for Sustainability (EfS). The symposium provides insights into cross-disciplinary initiatives between QUT Early childhood and Design staff and students, who have worked together with the iconic Lone Pine Koala Sanctuary in Brisbane, to explore imperatives around EfS, including leadership and professionalism. This practical, real world project has seen all stakeholders engage in a focus on sustainability which has opened new ways of thinking about early childhood centre design. Cross-disciplinarity has created space to re-think the potential of the disciplines to interweave, and in so doing opened different ways for thinking about early childhood centres – their operation and their function. For the first time in Queensland, this project creates strategic alliances between EfS, childcare, business and sustainable design. EfS is essential for addressing local and global environmental issues and early childhood EfS research has been gaining international momentum, with governments nominating this area as having significant capacity to empower communities and promote change. While models for collaboration exist in the early childhood programs in Reggio Emilia, we offer sustainability as a unique and contemporary focus with immense potential to generate international and national interest. To date Early Childhood degree students enrolled in a leadership and management unit/subject have worked collaboratively with Design students to explore the sustainable design of the proposed Lone Pine early childhood centre. Providing students with a ‘real world’ project sees them re-positioned from ‘novice’ to ‘professional’, where their knowledge, expertise and perspectives are simultaneously validated and challenged. These learning experiences are enabling students to practice a new model of early childhood leadership, one that is vital for leading in an increasingly complex world. The symposium will be comprised of three discrete, though interconnected presentations, that work together to tell the story of this project. Three key facets of the project will be explored during the 90 minute session, as the perspectives of key stakeholders are shared. The first presentation (A/Prof Julie Davis, Dr Lyndal O’Gorman& Dr Megan Gibson) will outline the role of QUT School of Early Childhood staff and students, with attention to the ways in which the project was embedded in students’ work in the final year of their degree program of study. The second presentation (Ms Lindy Osborne) will provide insights into the Design students’ collaborative work in the project. Finally, the key role of the Lone Pine Koala Sanctuary and their commitment for EfS (Ms Peta Wilson & Dr Sue Elliott) will map out the philosophy that underpins the project. Together, the authors will conclude key project outcomes that have been achieved through this real-world, cross-disciplinary work.
Resumo:
Background Psychotic-like experiences (PLEs) are subclinical delusional ideas and perceptual disturbances that have been associated with a range of adverse mental health outcomes. This study reports a qualitative and quantitative analysis of the acceptability, usability and short term outcomes of Get Real, a web program for PLEs in young people. Methods Participants were twelve respondents to an online survey, who reported at least one PLE in the previous 3 months, and were currently distressed. Ratings of the program were collected after participants trialled it for a month. Individual semi-structured interviews then elicited qualitative feedback, which was analyzed using Consensual Qualitative Research (CQR) methodology. PLEs and distress were reassessed at 3 months post-baseline. Results User ratings supported the program's acceptability, usability and perceived utility. Significant reductions in the number, frequency and severity of PLE-related distress were found at 3 months follow-up. The CQR analysis identified four qualitative domains: initial and current understandings of PLEs, responses to the program, and context of its use. Initial understanding involved emotional reactions, avoidance or minimization, limited coping skills and non-psychotic attributions. After using the program, participants saw PLEs as normal and common, had greater self-awareness and understanding of stress, and reported increased capacity to cope and accept experiences. Positive responses to the program focused on its normalization of PLEs, usefulness of its strategies, self-monitoring of mood, and information putting PLEs into perspective. Some respondents wanted more specific and individualized information, thought the program would be more useful for other audiences, or doubted its effectiveness. The program was mostly used in low-stress situations. Conclusions The current study provided initial support for the acceptability, utility and positive short-term outcomes of Get Real. The program now requires efficacy testing in randomized controlled trials.
Resumo:
In 2008, a collaborative partnership between Google and academia launched the Google Online Marketing Challenge (hereinafter Google Challenge), perhaps the world’s largest in-class competition for higher education students. In just two years, almost 20,000 students from 58 countries participated in the Google Challenge. The Challenge gives undergraduate and graduate students hands-on experience with the world’s fastest growing advertising mechanism, search engine advertising. Funded by Google, students develop an advertising campaign for a small to medium sized enterprise and manage the campaign over three consecutive weeks using the Google AdWords platform. This article explores the Challenge as an innovative pedagogical tool for marketing educators. Based on the experiences of three instructors in Australia, Canada and the United States, this case study discusses the opportunities and challenges of integrating this dynamic problem-based learning approach into the classroom.
Resumo:
BACKGROUND OR CONTEXT Thermodynamics is a core concept for mechanical engineers yet notoriously difficult. Evidence suggests students struggle to understand and apply the core fundamental concepts of thermodynamics with analysis indicating a problem with student learning/engagement. A contributing factor is that thermodynamics is a ‘science involving concepts based on experiments’ (Mayhew 1990) with subject matter that cannot be completely defined a priori. To succeed, students must engage in a deep-holistic approach while taking ownership of their learning. The difficulty in achieving this often manifests itself in students ‘not getting’ the principles and declaring thermodynamics ‘hard’. PURPOSE OR GOAL Traditionally, students practice and “learn” the application of thermodynamics in their tutorials, however these do not consider prior conceptions (Holman & Pilling 2004). As ‘hands on’ learning is the desired outcome of tutorials it is pertinent to study methods of improving their efficacy. Within the Australian context, the format of thermodynamics tutorials has remained relatively unchanged over the decades, relying anecdotally on a primarily didactic pedagogical approach. Such approaches are not conducive to deep learning (Ramsden 2003) with students often disengaged from the learning process. Evidence suggests (Haglund & Jeppsson 2012), however, that a deeper level and ownership of learning can be achieved using a more constructivist approach for example through self generated analogies. This pilot study aimed to collect data to support the hypothesis that the ‘difficulty’ of thermodynamics is associated with the pedagogical approach of tutorials rather than actual difficulty in subject content or deficiency in students. APPROACH Successful application of thermodynamic principles requires solid knowledge of the core concepts. Typically, tutorial sessions guide students in this application. However, a lack of deep and comprehensive understanding can lead to student confusion in the applications resulting in the learning of the ‘process’ of application without understanding ‘why’. The aim of this study was to gain empirical data on student learning of both concepts and application, within thermodynamic tutorials. The approach taken for data collection and analysis was: - 1 Four concurrent tutorial streams were timetabled to examine student engagement/learning in traditional ‘didactic’ (3 weeks) and non-traditional (3 weeks). In each week, two of the selected four sessions were traditional and two non-traditional. This provided a control group for each week. - 2 The non-traditional tutorials involved activities designed to promote student-centered deep learning. Specific pedagogies employed were: self-generated analogies, constructivist, peer-to-peer learning, inquiry based learning, ownership of learning and active learning. - 3 After a three-week period, teaching styles of the selected groups was switched, to allow each group to experience both approaches with the same tutor. This also acted to mimimise any influence of tutor personality / style on the data. - 4 At the conclusion of the trial participants completed a ‘5 minute essay’ on how they liked the sessions, a small questionnaire, modelled on the modified (Christo & Hoang, 2013)SPQ designed by Biggs (1987) and a small formative quiz to gauge the level of learning achieved. DISCUSSION Preliminary results indicate that overall students respond positively to in class demonstrations (inquiry based learning), and active learning activities. Within the active learning exercises, the current data suggests students preferred individual rather than group or peer-to-peer activities. Preliminary results from the open-ended questions such as “What did you like most/least about this tutorial” and “do you have other comments on how this tutorial could better facilitate your learning”, however, indicated polarising views on the nontraditional tutorial. Some student’s responded that they really like the format and emphasis on understanding the concepts, while others were very vocal that that ‘hated’ the style and just wanted the solutions to be presented by the tutor. RECOMMENDATIONS/IMPLICATIONS/CONCLUSION Preliminary results indicated a mixed, but overall positive response by students with more collaborative tutorials employing tasks promoting inquiry based, peer-to-peer, active, and ownership of learning activities. Preliminary results from student feedback supports evidence that students learn differently, and running tutorials focusing on only one pedagogical approached (typically didactic) may not be beneficial to all students. Further, preliminary data suggests that the learning / teaching style of both students and tutor are important to promoting deep learning in students. Data collection is still ongoing and scheduled for completion at the end of First Semester (Australian academic calendar). The final paper will examine in more detail the results and analysis of this project.
Resumo:
Real estate developers in China are using mergers and acquisitions (M&As) to ensure their survival and competitiveness. However, no suitable method is yet available to assess whether such M&As provide enhanced value for those involved. Using a hybrid method of data envelopment analysis (DEA) and Malmquist total factor productivity (TFP) indices, this paper evaluates the short and medium term effects of M&As on acquirers’ economic performance with a set of 32 M&A cases occurring during 2000–2011 in China. The results of the analysis show that M&As generally have a positive effect on acquirers’ economic performance. Acquisitions on average experienced a steady growth in developer Malmquist TFP, a more progressive adoption of technology immediately after acquisition, a slight short-term decrease in technical efficiency after acquisition but followed by a marked increase in the longer term once the integration and synergy benefits were realised. However, there is no evidence to show whether developers achieved any short or long term scale efficiency improvements after M&A. The findings of this study provide useful insights on developer M&A performance from an efficiency and productivity perspective.
Resumo:
Loading margin sensitivity (LMS) has been widely used in applications in the realm of voltage stability assessment and control. Typically, LMS is derived based on system equilibrium equations near bifurcation and therefore requires full detailed system model and significant computation effort. Availability of phasor measurement units (PMUs) due to the recent development of wide-area monitoring system (WAMS) provides an alternative computation-friendly approach for calculating LMS. With such motivation, this work proposes measurement-based wide-area loading margin sensitivity (WALMS) in bulk power systems. The proposed sensitivity, with its simplicity, has great potential to be embedded in real-time applications. Moreover, the calculation of the WALMS is not limited to low voltage near bifurcation point. A case study on IEEE 39-bus system verifies the proposed sensitivity. Finally, a voltage control scenario demonstrates the potential application of the WALMS.
Resumo:
Real-time locating systems (RTLSs) are considered an effective way to identify and track the location of an object in both indoor and outdoor environments. Various RTLSs have been developed and made commercially available in recent years. Research into RTLSs in the construction sector is ubiquitous and results have been published in many construction-related academic journals over the past decade. A succinct and systematic review of current applications would help academics, researchers and industry practitioners in identifying existing research deficiencies and therefore future research directions. However, such a review is lacking to date. This paper provides a framework for understanding RTLS research and development in the construction literature over the last decade. The research opportunities and directions of construction RTLS are highlighted. Background information relating to construction RTLS trends, accuracy, deployment, cost, purposes, advantages and limitations is provided. Four major research gaps are identified and research opportunities and directions are highlighted.
Resumo:
In Atlanta, the trade ministers of a dozen countries across the Pacific Rim announced that they had successfully reached a concluded agreement upon the Trans-Pacific Partnership. The debate over the TPP will now play out in legislatures across the Pacific Rim, where sentiment towards the deal is much more mixed. The ministers insisted: “After more than five years of intensive negotiations, we have come to an agreement that will support jobs, drive sustainable growth, foster inclusive development, and promote innovation across the Asia-Pacific region … The agreement achieves the goal we set forth of an ambitious, comprehensive, high standard and balanced agreement that will benefit our nation’s citizens … We expect this historic agreement to promote economic growth, support higher-paying jobs; enhance innovation, productivity and competitiveness; raise living standards; reduce poverty in our countries; and to promote transparency, good governance, and strong labor and environmental protections.” But there has been fierce criticism of the Trans-Pacific Partnership, because of both its secrecy and its substance. Nobel Laureate Professor Joseph Stiglitz has warned that the agreement is not about free trade, but about the protection of corporate monopolies. The intellectual property chapter provides for longer and stronger protection of intellectual property rights. The investment chapter provides foreign investors with the power to challenge governments under an investor-state dispute settlement (ISDS) regime. The environment chapter is weak and toothless, and seems to be little more than an exercise in greenwashing. The health annex — and many other parts of the agreement — strengthen the power of pharmaceutical companies and biotechnology developers. The text on state-owned enterprises raises concerns about public ownership of postal services, broadcasters and national broadband services.
Resumo:
A central tenet in the theory of reliability modelling is the quantification of the probability of asset failure. In general, reliability depends on asset age and the maintenance policy applied. Usually, failure and maintenance times are the primary inputs to reliability models. However, for many organisations, different aspects of these data are often recorded in different databases (e.g. work order notifications, event logs, condition monitoring data, and process control data). These recorded data cannot be interpreted individually, since they typically do not have all the information necessary to ascertain failure and preventive maintenance times. This paper presents a methodology for the extraction of failure and preventive maintenance times using commonly-available, real-world data sources. A text-mining approach is employed to extract keywords indicative of the source of the maintenance event. Using these keywords, a Naïve Bayes classifier is then applied to attribute each machine stoppage to one of two classes: failure or preventive. The accuracy of the algorithm is assessed and the classified failure time data are then presented. The applicability of the methodology is demonstrated on a maintenance data set from an Australian electricity company.
Resumo:
As one of the most widely used wireless network technologies, IEEE 802.11 wireless local area networks (WLANs) have found a dramatically increasing number of applications in soft real-time networked control systems (NCSs). To fulfill the real-time requirements in such NCSs, most of the bandwidth of the wireless networks need to be allocated to high-priority data for periodic measurements and control with deadline requirements. However, existing QoS-enabled 802.11 medium access control (MAC) protocols do not consider the deadline requirements explicitly, leading to unpredictable deadline performance of NCS networks. Consequentially, the soft real-time requirements of the periodic traffic may not be satisfied, particularly under congested network conditions. This paper makes two main contributions to address this problem in wireless NCSs. Firstly, a deadline-constrained MAC protocol with QoS differentiation is presented for IEEE 802.11 soft real-time NCSs. It handles periodic traffic by developing two specific mechanisms: a contention-sensitive backoff mechanism, and an intra-traffic-class QoS differentiation mechanism. Secondly, a theoretical model is established to describe the deadline-constrained MAC protocol and evaluate its performance of throughput, delay and packet-loss ratio in wireless NCSs. Numerical studies are conducted to validate the accuracy of the theoretical model and to demonstrate the effectiveness of the new MAC protocol.
Resumo:
One of the so-called ‘wicked problems’ confronting most nations is poverty, or the unequal distribution of resources. This problem is perennial, but how, where and with which physical, psychological, social and educational effects, and for which students (and their teachers), needs continual scrutiny. Poverty is relative. Entire populations may be poor or groups of people and individuals within nations may be poor. Poverty results from injustice. Not only the un- and under-employed are living in poverty, but also the ‘working poor’. Now we see affluent societies with growing pockets of persistent poverty. While there are those who dispute the statistics on the rise of poverty because different nations use different measures (for example see Biddle, 2013; http://theconversation.com/factcheck-is-poverty-on-the-rise-in-australia-17512), there seems to be little dispute that the gaps between the richest and the poorest are increasing (see http://www.stanford.edu/group/scspi/sotu/SOTU_2014_CPI.pdf)...