Markers of disease severity are associated with malnutrition in Parkinson's disease

Objective In Parkinson's disease (PD), commonly reported risk factors for malnutrition in other populations commonly occur. Few studies have explored which of these factors are of particular importance in malnutrition in PD. The aim was to identify the determinants of nutritional status in people with Parkinson's disease (PWP). Methods Community-dwelling PWP (>18 years) were recruited (n = 125; 73M/52F; Mdn 70 years). Self-report assessments included Beck's Depression Inventory (BDI), Spielberger Trait Anxiety Inventory (STAI), Scales for Outcomes in Parkinson's disease – Autonomic (SCOPA-AUT), Modified Constipation Assessment Scale (MCAS) and Freezing of Gait Questionnaire (FOG-Q). Information about age, PD duration, medications, co-morbid conditions and living situation was obtained. Addenbrooke's Cognitive Examination (ACE-R), Unified Parkinson's Disease Rating Scale (UPDRS) II and UPDRS III were performed. Nutritional status was assessed using the Subjective Global Assessment (SGA) as part of the scored Patient-Generated Subjective Global Assessment (PG-SGA). Results Nineteen (15%) were malnourished (SGA-B). Median PG-SGA score was 3. More of the malnourished were elderly (84% vs. 71%) and had more severe disease (H&Y: 21% vs. 5%). UPDRS II and UPDRS III scores and levodopa equivalent daily dose (LEDD)/body weight(mg/kg) were significantly higher in the malnourished (Mdn 18 vs. 15; 20 vs. 15; 10.1 vs. 7.6 respectively). Regression analyses revealed older age at diagnosis, higher LEDD/body weight (mg/kg), greater UPDRS III score, lower STAI score and higher BDI score as significant predictors of malnutrition (SGA-B). Living alone and higher BDI and UPDRS III scores were significant predictors of a higher log-adjusted PG-SGA score. Conclusions In this sample of PWP, the rate of malnutrition was higher than that previously reported in the general community. Nutrition screening should occur regularly in those with more severe disease and depression. Community support should be provided to PWP living alone. Dopaminergic medication should be reviewed with body weight changes.

The adoption of e-learning 2.0 in higher education by teachers and students : an investigation using mixed methods approach

This paper describes an approach to investigate the adoption of Web 2.0 in the classroom using a mixed methods study. By using a combination of qualitative or quantitative data collection and analysis techniques, we attempt to synergize the results and provide a more valid understanding of Web 2.0 adoption for learning by both teachers and students. This approach is expected to yield a better holistic view on the adoption issues associated with the e-learning 2.0 concept in current higher education as opposed to single method studies done previously. This paper also presents some early findings of e-learning 2.0 adoption using this research method

Validation of the Educational Stress Scale for Adolescents (ESSA) in Vietnam

Introduction To date, there has been little systematic, quantitative research on the links between academic pressure and mental health among adolescents in Asia, and none in Vietnam. In part, this is because of a lack of appropriate tools to measure this complex phenomenon. This study was to validate the Educational Stress Scale for Adolescents (ESSA), developed and tested in China, with the aim of fostering further research in Asia. Methods A total of 1283 students were recruited in 3 secondary schools and 3 high schools in Ho Chi Minh City, Vietnam. Anonymous, selfreport questionnaires included the ESSA and previously validated measures of mental health. Results Among the 1226 questionnaires available, 54% of respondents were female. The mean age was 15.3 years. Students reported substantial study burden. The ESSA had good internal consistency, and factorial validity and concurrent validity were established. Conclusion The ESSA is a suitable measure for school-based mental health research in Asia.

Assessing the Impact of Sensor Accuracy and Sensor Choice on Air Traffic Conflict Risk Estimation using Risk-Ratio Concepts

One of the primary desired capabilities of any future air traffic separation management system is the ability to provide early conflict detection and resolution effectively and efficiently. In this paper, we consider the risk of conflict as a primary measurement to be used for early conflict detection. This paper focuses on developing a novel approach to assess the impact of different measurement uncertainty models on the estimated risk of conflict. The measurement uncertainty model can be used to represent different sensor accuracy and sensor choices. Our study demonstrates the value of modelling measurement uncertainty in the conflict risk estimation problem and presents techniques providing a means of assessing sensor requirements to achieve desired conflict detection performance.

Safety culture in supply chains : 'Customer is king'

Despite the presence of many regulations governing the operation of heavy vehicles and supply chains in Australia, the truck driving sector continues to have the highest incidence of fatal injuries compared to all other industries. The working environment has been the focus of attention by safety researchers during the past few decades, with particular consideration been given to the concept ‘safety culture’ and how to maintain, modify and advance responses to occupational risk. One important aspect of the heavy industry which sets it apart is the existence of cultural or sub-cultural influences at an industry wide and occupation-specific level rather than organisational level. This paper reports on the findings of stakeholder’s perceptions of the influences of power and control, and culture on industry safety. In-depth structured interviews were conducted during 2011 with Australian industry stakeholders (n=31). The questioning surrounded decision-making processes with regards to identifying risks, self-monitoring and reducing risky activities; as well as how power-affected relationships may influence the operational performance of supply chains and impacts on driver safety. One of the most significant findings from these interviews relates to the notion of power. The perception that the ‘Customer is King’ was widely viewed, with the majority of stakeholders believing that there exists a ‘master slave mentality’ in the industry. There appears to be great frustration in the industry as to the apparent immunity of customers (particularly retail supply chains) to their responsibilities. There was also a strong perception that the customer holds the balance of power by covertly employing remuneration-related incentives and pressures. Smaller trucking companies are perceived as being more vulnerable to the pressure of customer expectations.

Returning to the roots of culture : a review and re-conceptualisation of safety culture

Despite significant research, there is still little agreement over how to define safety culture or of what it is comprised. Due to this lack of agreement, much of the safety culture research has little more than safety management strategies in common. There is, however, a degree of acceptance of the close relationship between safety culture and organisational culture. Organisational culture can be described using traditional views of culture drawn from the anthropology and cultural psychology literature. However, the safety culture literature rarely ventures beyond organisational culture into discussions of these more traditional concepts of culture. There is a need to discuss how these concepts of culture can be applied to safety culture to provide greater understanding of safety culture and additional means by which to approach safety in the workplace. This review explores how three traditional conceptualisations of culture; the normative, anthropological and pragmatist conceptualisations, can and have been be applied to safety culture. Finally the review proposes a synthesised conceptualisation of safety culture which can be used to provide greater depth and practical applicability of safety culture, by increasing our understanding of the interactions between cultural and contextual variables in a given workplace and the effect they have on safety.

Towards tacit knowledge sharing over social web tools

Purpose - Researchers debate whether tacit knowledge sharing through Information Technology (IT) is actually possible. However, with the advent of social web tools, it has been argued that most shortcomings of tacit knowledge sharing are likely to disappear. This paper has two purposes: firstly, to demonstrate the existing debates in the literature regarding tacit knowledge sharing using IT, and secondly, to identify key research gaps that lay the foundations for future research into tacit knowledge sharing using social web. Design/methodology/approach - This paper reviews current literature on IT-mediated tacit knowledge sharing and opens a discussion on tacit knowledge sharing through the use of social web. Findings - First, the existing schools of thoughts in regards to IT ability for tacit knowledge sharing are introduced. Next, difficulties of sharing tacit knowledge through the use of IT are discussed. Then, potentials and pitfalls of social web tools are presented. Finally, the paper concludes that whilst there are significant theoretical arguments supporting that the social web facilitates tacit knowledge sharing there is a lack of empirical evidence to support these arguments and further work is required. Research limitations/implications - The limitations of the review includes: covering only papers that were published in English, issues of access to full texts of some resources, possibility of missing some resources due to search strings used or limited coverage of databases searched. Originality/value - The paper contributes to the fast growing literature on the intersection of KM and IT particularly by focusing on tacit knowledge sharing in social media space. The paper highlights the need for further studies in this area by discussing the current situation in the literature and disclosing the emerging questions and gaps for future studies.

Growing profitable or growing from profits : putting the horse in front of the cart?

Top lists of and praise for the economy's fastest growing firms abound in business media around the world. Similarly, in academic research there has been a tendency to equate firm growth with business success. This tendency appears to be particularly pronounced in-but not confined to­ entrepreneurship research. In this study we critically examine this tendency to portray firm growth as more or less universally favorable. While several theories suggest that growth drives profitability we first show that the available empirical evidence does not support the existence of a general, positive relation­ ship between growth and profitability. Using the theoretical lens of the Resource-Based View (RBV) we then argue that sound growth usually starts with achieving sufficient levels of profitability. In summary, our theoretical argument is as follows: In a population of SMEs, superior profitability is likely to be indicative of having built a resource-based competitive advantage. Building such a valuable and hard to-copy advantage may at first constrain growth. However, the underlying advantage itself and the financial resources generated through high profitability make it possible for firms in this situation to now achieve sound and sustainable growth - which may require building a series of temporary advantages- without having to sacrifice profitability. By contrast, when firms strive for high growth starting from low profitability, the latter often indicates lack of competitive advantage. Therefore growth must be achieved in head-to-head competition with equally attractive alternatives, leading to profitability deterioration rather than improvement. In addition, these low profitability firms are unlikely to be able to finance strategies toward building valuable and difficult-to-imitate advantages while growing.

Performance configurations over time: implications for growth-and profit-oriented strategies

Entrepreneurship research and practice places emphasis on company growth as a measure of entrepreneurial success. In many cases, there has been a tendency to give growth a very central role, with some researchers even seeing growth as the very essence of entrepreneurship (Cole, 1949; Sexton, 1997; Stevenson & Gumpert, 1991). A large number of empirical studies of the performance of young and/or small firms use growth as the dependent variable (see reviews by Ardishvili, Cardozo, Harmon, & Vadakath, 1998; Delmar, 1997; Wiklund, 1998). By contrast, the two most prominent views of strategic management – strategic positioning (Porter, 1980) and the resource-based view (Barney, 1991; Wernerfelt, 1984) – are both concerned with achieving competitive advantage and regard achieving economic rents and profitability relative to other competitors as the central measures of firm performance. Strategic entrepreneurship integrates these two perspectives and is simultaneously concerned with opportunity seeking and advantage seeking (Hitt, Ireland, Camp, & Sexton, 2002; Ireland, Hitt, & Sirmon, 2003). Consequently, both company growth and relative profitability are together relevant measures of firm performance in the domain of strategic entrepreneurship.

Cultural impact on e-service use in Saudi Arabia : results from questionnaire

This paper reports the results of a mixed method approach to answer: what are the cultural values that impact on e-service use in Saudi Arabia? Cultural theories, dimensions, and models previously identified in the literature, in addition to individual interviews and focus groups, test the current identified uncovered elements of Saudi culture. This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture. It will then describe the method used and present the questionnaire findings. All of the tested hypotheses were found consistent with their predicted outcomes except hypotheses 4 and 8 were partially consistent. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of social and organisational aspects of e-society research and practices, by deeply understanding them as of the influntials to e-service implementation.

Cultural impact on e-service use in Saudi Arabia : the role of nepotism

This paper reports the results of a mixed method approach to answer: To what extent do cultural values impact on e-service use in Saudi Arabia, and if so how? This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture. It will then describe the method used and present the questionnaire findings related to the role of nepotism. The review of the literature on nepotism indicates there is still much to be studied and learned. The legal aspects of nepotism, in addition to its impact on human resource management appear to be the more reported issues. However, nepotism’s impact on Information and Communication Technologies (ICT) has not been studied. This research aims to cover this gap by investigating to what extent nepotism, as one of Saudi Arabia’s cultural values, impacts on e-service use in Saudi Arabia. The tested hypothesis was found consistent with its predicted outcome: nepotism is a negative predictor of intention to use e- services in Saudi Arabia. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of social and organisational aspects of e-society research and practices, by deeply understanding them as of the influntials to e-service implementation.

Cultural impact on e-service use in Saudi Arabia : the need for interaction with other humans

This paper reports the results of a mixed method approach to answer: To what extent do cultural values impact on e-service use in Saudi Arabia, and if so how? This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture with focus on our scope: the fear of a lack of Interaction with other Humans. It will then describe the method used and present the qualitative and quantitative findings related to the need for Interactions with other Humans. Much of the written literature about human interaction aims at Information Systems design or design improvement. Yet, this is different to what is being investigated in this study. One of the factors this study will consider is the perceived lack of interaction with other humans or the anxiety people may feel in missing the physical interaction with other people by fully moving business interaction to the virtual world. The review of the literature indicates that the impact of such factor on Information and Communication Technologies (ICT) use has not been studied. This research aims to cover this gap by investigating to what extent the fear of a lack of Interaction with other Humans, as one of Saudi Arabia’s cultural values, impacts on e-service use in Saudi Arabia. The tested hypothesis was found consistent with its predicted outcome: the fear of a lack of Interaction with other Humans is a negative predictor of intention to use e-services in Saudi Arabia. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of ICTs implementation and use.

A finite element model of seat cushion indentation with a soft tissue human occupant model

Effective digital human model (DHM) simulation of automotive driver packaging ergonomics, safety and comfort depends on accurate modelling of occupant posture, which is strongly related to the mechanical interaction between human body soft tissue and flexible seat components. This paper presents a finite-element study simulating the deflection of seat cushion foam and supportive seat structures, as well as human buttock and thigh soft tissue when seated. The three-dimensional data used for modelling thigh and buttock geometry were taken on one 95th percentile male subject, representing the bivariate percentiles of the combined hip breadth (seated) and buttock-to-knee length distributions of a selected Australian and US population. A thigh-buttock surface shell based on this data was generated for the analytic model. A 6mm neoprene layer was offset from the shell to account for the compression of body tissue expected through sitting in a seat. The thigh-buttock model is therefore made of two layers, covering thin to moderate thigh and buttock proportions, but not more fleshy sizes. To replicate the effects of skin and fat, the neoprene rubber layer was modelled as a hyperelastic material with viscoelastic behaviour in a Neo-Hookean material model. Finite element (FE) analysis was performed in ANSYS V13 WB (Canonsburg, USA). It is hypothesized that the presented FE simulation delivers a valid result, compared to a standard SAE physical test and the real phenomenon of human-seat indentation. The analytical model is based on the CAD assembly of a Ford Territory seat. The optimized seat frame, suspension and foam pad CAD data were transformed and meshed into FE models and indented by the two layer, soft surface human FE model. Converging results with the least computational effort were achieved for a bonded connection between cushion and seat base as well as cushion and suspension, no separation between neoprene and indenter shell and a frictional connection between cushion pad and neoprene. The result is compared to a previous simulation of an indentation with a hard shell human finite-element model of equal geometry, and to the physical indentation result, which is approached with very high fidelity. We conclude that (a) SAE composite buttock form indentation of a suspended seat cushion can be validly simulated in a FE model of merely similar geometry, but using a two-layer hard/soft structure. (b) Human-seat indentation of a suspended seat cushion can be validly simulated with a simplified human buttock-thigh model for a selected anthropomorphism.

Creative city index [Report]

The CCI Creative City Index (CCI-CCI) is a new approach to the measurement and ranking of creative global cities. It is constructed over eight principal dimensions, each with multiple distinct elements. Some of these dimensions are familiar from other global city indexes, such as the MORI or GaWC indexes, which account for the size of creative industries, the scale of cultural amenities, or the flows of creative people and global connectedness. In addition to these indicators, the CCI-CCI contributes several new dimensions. These measure the demand side of creative participation, the attention economy, user-created content, and the productivity of socially networked consumers. Global creative cities can often seem alike, in respect of per-capita measures of factors such as public spending on cultural amenities, or the number of hotels and restaurants. This is to be expected when people and capital are relatively free to move, and where economic and political institutions are broadly comparable. However, we find that different cities can register far larger differences at the level of consumer-co-creation and especially digital creative ‘microproductivity’. To explain this finding, we review the logic and rationale of creative and global city index construction and present a review of previous and contemporary indexes. We set out the case for our new model of a creative city index by showing why greater attention to consumer co-creation and microproductivity are important, as well as examining how these factors have been previously overlooked. We show how we have CCI-CCI Creative City Index measured these additional factors and indicate the effect they have on creative and global city indexes. We then present the findings from a pilot study of six cities, two Australian, two German and two from the UK, to indicate how the new index is calculated and applied. Our results indicate much greater variance arising from the new arguments between cities.