Motivation, development and validation of a new spectral greenness index : a spectral dimension related to foliage projective cover

A method is presented for the development of a regional Landsat-5 Thematic Mapper (TM) and Landsat-7 Enhanced Thematic Mapper plus (ETM+) spectral greenness index, coherent with a six-dimensional index set, based on a single ETM+ spectral image of a reference landscape. The first three indices of the set are determined by a polar transformation of the first three principal components of the reference image and relate to scene brightness, percent foliage projective cover (FPC) and water related features. The remaining three principal components, of diminishing significance with respect to the reference image, complete the set. The reference landscape, a 2200 km2 area containing a mix of cattle pasture, native woodland and forest, is located near Injune in South East Queensland, Australia. The indices developed from the reference image were tested using TM spectral images from 19 regionally dispersed areas in Queensland, representative of dissimilar landscapes containing woody vegetation ranging from tall closed forest to low open woodland. Examples of image transformations and two-dimensional feature space plots are used to demonstrate image interpretations related to the first three indices. Coherent, sensible, interpretations of landscape features in images composed of the first three indices can be made in terms of brightness (red), foliage cover (green) and water (blue). A limited comparison is made with similar existing indices. The proposed greenness index was found to be very strongly related to FPC and insensitive to smoke. A novel Bayesian, bounded space, modelling method, was used to validate the greenness index as a good predictor of FPC. Airborne LiDAR (Light Detection and Ranging) estimates of FPC along transects of the 19 sites provided the training and validation data. Other spectral indices from the set were found to be useful as model covariates that could improve FPC predictions. They act to adjust the greenness/FPC relationship to suit different spectral backgrounds. The inclusion of an external meteorological covariate showed that further improvements to regional-scale predictions of FPC could be gained over those based on spectral indices alone.

Development of a computer simulation tool for application in adolescent spinal deformity surgery

Scoliosis is a three-dimensional spinal deformity which requires surgical correction in progressive cases. In order to optimize correction and avoid complications following scoliosis surgery, patient-specific finite element models (FEM) are being developed and validated by our group. In this paper, the modeling methodology is described and two clinically relevant load cases are simulated for a single patient. Firstly, a pre-operative patient flexibility assessment, the fulcrum bending radiograph, is simulated to assess the model's ability to represent spine flexibility. Secondly, intra-operative forces during single rod anterior correction are simulated. Clinically, the patient had an initial Cobb angle of 44 degrees, which reduced to 26 degrees during fulcrum bending. Surgically, the coronal deformity corrected to 14 degrees. The simulated initial Cobb angle was 40 degrees, which reduced to 23 degrees following the fulcrum bending load case. The simulated surgical procedure corrected the coronal deformity to 14 degrees. The computed results for the patient-specific FEM are within the accepted clinical Cobb measuring error of 5 degrees, suggested that this modeling methodology is capable of capturing the biomechanical behaviour of a scoliotic human spine during anterior corrective surgery.

The development of an evidentiary on-board massmonitoring application for heavy vehicles

This paper reports on the development of specifications for an on-board mass monitoring (OBM) application for regulatory requirements in Australia. An earlier paper reported on feasibility study and pilot testing program prior to the specification development [1]. Learnings from the pilot were used to refine this testing process and a full scale testing program was conducted from July to October 2008. The results from the full scale test and evidentiary implications are presented in this report. The draft specification for an evidentiary on-board mass monitoring application is currently under development.

Kinematics of intracellular chlamydiae provide evidence for contact-dependent development

A crucial process of chlamydial development involves differentiation of the replicative reticulate body (RB) into the infectious elementary body (EB). We present experimental evidence to provide support for a contact-dependent hypothesis for explaining the trigger involved in differentiation. We recorded live-imaging of Chlamydia trachomatis-infected McCoy cells at key times during development and tracked the temporospatial trajectories of individual chlamydial particles. We found that movement of the particles is related to development. Early to mid-developmental stages involved slight wobbling of RBs. The average speed of particles increased sharply at 24 h postinfection (after the estimated onset of RB to EB differentiation). We also investigated a penicillin-supplemented culture containing EBs, RBs, and aberrantly enlarged, stressed chlamydiae. Near-immobile enlarged particles are consistent with their continued tethering to the chlamydial inclusion membrane (CIM). We found a significantly negative, nonlinear association between speed and size/type of particles, providing further support for the hypothesis that particles become untethered near the onset of RB to EB differentiation. This study establishes the relationship between the motion properties of the chlamydiae and developmental stages, whereby wobbling RBs gradually lose contact with the CIM, and RB detachment from the CIM is coincidental with the onset of late differentiation.

Curriculum development of joint degrees courses with international institutions

With globalisation and severe budget constraints in the education sector in Australia and around the world it has become necessary for higher education institutions to be more outward looking and seek funding from non traditional sources to supplement the financial shortfalls. One way to overcome this problem is to work cooperatively with other institutions to share facilities and courses, at the same time generating valuable income to maintain the operation of the university. This paper describes the development of joint curricula in built environment and engineering courses in QUT. It outlines the stages of development starting from seeking international partners, developing memorandum of understanding, making visit to partner institution to inspect the facilities, curriculum development to meet the academic requirements of the institutions and professional bodies and finally the implementation process.

Development of a particle number and particle mass emissions inventory for an urban fleet : a study in South-East Queensland

Motor vehicles are a major source of gaseous and particulate matter pollution in urban areas, particularly of ultrafine sized particles (diameters < 0.1 µm). Exposure to particulate matter has been found to be associated with serious health effects, including respiratory and cardiovascular disease, and mortality. Particle emissions generated by motor vehicles span a very broad size range (from around 0.003-10 µm) and are measured as different subsets of particle mass concentrations or particle number count. However, there exist scientific challenges in analysing and interpreting the large data sets on motor vehicle emission factors, and no understanding is available of the application of different particle metrics as a basis for air quality regulation. To date a comprehensive inventory covering the broad size range of particles emitted by motor vehicles, and which includes particle number, does not exist anywhere in the world. This thesis covers research related to four important and interrelated aspects pertaining to particulate matter generated by motor vehicle fleets. These include the derivation of suitable particle emission factors for use in transport modelling and health impact assessments; quantification of motor vehicle particle emission inventories; investigation of the particle characteristic modality within particle size distributions as a potential for developing air quality regulation; and review and synthesis of current knowledge on ultrafine particles as it relates to motor vehicles; and the application of these aspects to the quantification, control and management of motor vehicle particle emissions. In order to quantify emissions in terms of a comprehensive inventory, which covers the full size range of particles emitted by motor vehicle fleets, it was necessary to derive a suitable set of particle emission factors for different vehicle and road type combinations for particle number, particle volume, PM1, PM2.5 and PM1 (mass concentration of particles with aerodynamic diameters < 1 µm, < 2.5 µm and < 10 µm respectively). The very large data set of emission factors analysed in this study were sourced from measurement studies conducted in developed countries, and hence the derived set of emission factors are suitable for preparing inventories in other urban regions of the developed world. These emission factors are particularly useful for regions with a lack of measurement data to derive emission factors, or where experimental data are available but are of insufficient scope. The comprehensive particle emissions inventory presented in this thesis is the first published inventory of tailpipe particle emissions prepared for a motor vehicle fleet, and included the quantification of particle emissions covering the full size range of particles emitted by vehicles, based on measurement data. The inventory quantified particle emissions measured in terms of particle number and different particle mass size fractions. It was developed for the urban South-East Queensland fleet in Australia, and included testing the particle emission implications of future scenarios for different passenger and freight travel demand. The thesis also presents evidence of the usefulness of examining modality within particle size distributions as a basis for developing air quality regulations; and finds evidence to support the relevance of introducing a new PM1 mass ambient air quality standard for the majority of environments worldwide. The study found that a combination of PM1 and PM10 standards are likely to be a more discerning and suitable set of ambient air quality standards for controlling particles emitted from combustion and mechanically-generated sources, such as motor vehicles, than the current mass standards of PM2.5 and PM10. The study also reviewed and synthesized existing knowledge on ultrafine particles, with a specific focus on those originating from motor vehicles. It found that motor vehicles are significant contributors to both air pollution and ultrafine particles in urban areas, and that a standardized measurement procedure is not currently available for ultrafine particles. The review found discrepancies exist between outcomes of instrumentation used to measure ultrafine particles; that few data is available on ultrafine particle chemistry and composition, long term monitoring; characterization of their spatial and temporal distribution in urban areas; and that no inventories for particle number are available for motor vehicle fleets. This knowledge is critical for epidemiological studies and exposure-response assessment. Conclusions from this review included the recommendation that ultrafine particles in populated urban areas be considered a likely target for future air quality regulation based on particle number, due to their potential impacts on the environment. The research in this PhD thesis successfully integrated the elements needed to quantify and manage motor vehicle fleet emissions, and its novelty relates to the combining of expertise from two distinctly separate disciplines - from aerosol science and transport modelling. The new knowledge and concepts developed in this PhD research provide never before available data and methods which can be used to develop comprehensive, size-resolved inventories of motor vehicle particle emissions, and air quality regulations to control particle emissions to protect the health and well-being of current and future generations.

An historical analysis of the development of thinking in the principal writings of Malcolm Knowles

Malcolm Shepherd Knowles was a key writer and theorist in the field of adult education in the United States. He died in 1997 and left a large legacy of books and journal articles. This thesis traced the development of his thinking over the 46-year period from 1950 to 1995. It examined the 25 works authored, co-authored, edited, reissued and revised by him during that period. The writings were scrutinised using a literature research methodology to expose the theoretical content, and a history of thought lens to identify and account for the development of major ideas. The methodology enabled a gradual unfolding of the history. A broadly-consistent and sequential pattern of thought focusing on the notion of andragogy emerged. The study revealed that after the initial phases of exploratory thinking, Knowles developed a practical-theoretical framework he believed could function as a comprehensive theory of adult learning. As his thinking progressed, his theory developed into a unified framework for human resource development and, later, into a model for the development of self-directed lifelong learners. The study traced the development of Knowles’ thinking through the phases of thought, identified the writings that belonged within each phase and produced a series of diagrammatic representations showing the evolution of his conceptual framework. The production of a history of the development of Knowles’ thought is the major outcome of the study. In addition to plotting the narrative sequence of thought-events, the history helps to explicate the factors and conditions that influenced Knowles’ thinking and to show the interrelationships between ideas. The study should help practitioners in their use and appreciation of Knowles’ works.

The development and validation of Australian indices of child development - Part II : validity support

The two outcome indices described in a companion paper (Sanson et al., Child Indicators Research, 2009) were developed using data from the Longitudinal Study of Australian Children (LSAC). These indices, one for infants and the other for 4 year to 5 year old children, were designed to fill the need for parsimonious measures of children’s developmental status to be used in analyses by a broad range of data users and to guide government policy and interventions to support young children’s optimal development. This paper presents evidence from Wave 1data from LSAC to support the validity of these indices and their three domain scores of Physical, Social/Emotional, and Learning. Relationships between the indices and child, maternal, family, and neighborhood factors which are known to relate concurrently to child outcomes were examined. Meaningful associations were found with the selected variables, thereby demonstrating the usefulness of the outcome indices as tools for understanding children’s development in their family and socio-cultural contexts. It is concluded that the outcome indices are valuable tools for increasing understanding of influences on children’s development, and for guiding policy and practice to optimize children’s life chances.

The development and validation of Australian Indices of Child Development — Part I: conceptualisation and development

The Longitudinal Study of Australian Children (LSAC) is a major national study examining the lives of Australian children, using a cross-sequential cohort design and data from parents, children, and teachers for 5,107 infants (3–19 months) and 4,983 children (4–5 years). Its data are publicly accessible and are used by researchers from many disciplinary backgrounds. It contains multiple measures of children’s developmental outcomes as well as a broad range of information on the contexts of their lives. This paper reports on the development of summary outcome indices of child development using the LSAC data. The indices were developed to fill the need for indicators suitable for use by diverse data users in order to guide government policy and interventions which support young children’s optimal development. The concepts underpinning the indices and the methods of their development are presented. Two outcome indices (infant and child) were developed, each consisting of three domains—health and physical development, social and emotional functioning, and learning competency. A total of 16 measures are used to make up these three domains in the Outcome Index for the Child Cohort and six measures for the Infant Cohort. These measures are described and evidence supporting the structure of the domains and their underlying latent constructs is provided for both cohorts. The factorial structure of the Outcome Index is adequate for both cohorts, but was stronger for the child than infant cohort. It is concluded that the LSAC Outcome Index is a parsimonious measure representing the major components of development which is suitable for non-specialist data users. A companion paper (Sanson et al. 2010) presents evidence of the validity of the Index.

Impact of music therapy to promote positive parenting and child development

The effectiveness of a 10-week group music therapy program for marginalized parents and their children aged 0–5 years was examined. Musical activities were used to promote positive parent–child relationships and children’s behavioral, communicative and social development. Participants were 358 parents and children from families facing social disadvantage, young parents or parents of a child with a disability. Significant improvements were found for therapist-observed parent and child behaviors, and parent-reported irritable parenting, educational activities in the home, parent mental health and child communication and social play skills. This study provides evidence of the potential effectiveness of music therapy for early intervention.

A model of teacher professional development based on the principles of lesson study

The researcher’s professional role as an Education Officer was the impetus for this study. Designing and implementing professional development activities is a significant component of the researcher’s position description and as a result of reflection and feedback from participants and colleagues, the creation of a more effective model of professional development became the focus for this study. Few studies have examined all three links between the purposes of professional development that is, increasing teacher knowledge, improving teacher practice, and improving student outcomes. This study is significant in that it investigates the nature of the growth of teachers who participated in a model of professional development which was based upon the principles of Lesson Study. The research provides qualitative and empirical data to establish some links between teacher knowledge, teacher practice, and student learning outcomes. Teacher knowledge in this study refers to mathematics content knowledge as well as pedagogical-content knowledge. The outcomes for students include achievement outcomes, attitudinal outcomes, and behavioural outcomes. As the study was conducted at one school-site, existence proof research was the focus of the methodology and data collection. Developing over the 2007 school year, with five teacher-participants and approximately 160 students from Year Levels 6 to 9, the Lesson Study-principled model of professional development provided the teacher-participants with on-site, on-going, and reflective learning based on their classroom environment. The focus area for the professional development was strategising the engagement with and solution of worded mathematics problems. A design experiment was used to develop the professional development as an intervention of prevailing teacher practice for which data were collected prior to and after the period of intervention. A model of teacher change was developed as an underpinning framework for the development of the study, and was useful in making decisions about data collection and analyses. Data sources consisted of questionnaires, pre-tests and post-tests, interviews, and researcher observations and field notes. The data clearly showed that: content knowledge and pedagogical-content knowledge were increased among the teacher-participants; teacher practice changed in a positive manner; and that a majority of students demonstrated improved learning outcomes. The positive changes to teacher practice are described in this study as the demonstrated use of mixed pedagogical practices rather than a polarisation to either traditional pedagogical practices or contemporary pedagogical practices. The improvement in student learning outcomes was most significant as improved achievement outcomes as indicated by the comparison of pre-test and post-test scores. The effectiveness of the Lesson Study-principled model of professional development used in this study was evaluated using Guskey’s (2005) Five Levels of Professional Development Evaluation.