Reducing falls in hospital through education to change patient and staff behaviour: A stepped wedge cluster randomised controlled effectiveness trial

Background: Falls remain the most frequent adverse event reported in hospitals, particularly geriatric rehabilitation wards. Randomised trials reducing fall injuries in hospitals have been elusive. Our previous randomised trial (n = 1206) demonstrated that multimedia education with physiotherapist falls educator support reduced falls among patients with higher cognition levels, but this benefit was offset by a potential increase in falls rates among patients with poor cognition. In the previous trial, hospital staff were blinded to the allocation of individual patients, and only delivered usual care.

Statistical analysis of spectral data: A methodology for designing an intelligent monitoring system for the diabetic foot

Early detection of (pre-)signs of ulceration on a diabetic foot is valuable for clinical practice. Hyperspectral imaging is a promising technique for detection and classification of such (pre-)signs. However, the number of the spectral bands should be limited to avoid overfitting, which is critical for pixel classification with hyperspectral image data. The goal was to design a detector/classifier based on spectral imaging (SI) with a small number of optical bandpass filters. The performance and stability of the design were also investigated. The selection of the bandpass filters boils down to a feature selection problem. A dataset was built, containing reflectance spectra of 227 skin spots from 64 patients, measured with a spectrometer. Each skin spot was annotated manually by clinicians as "healthy" or a specific (pre-)sign of ulceration. Statistical analysis on the data set showed the number of required filters is between 3 and 7, depending on additional constraints on the filter set. The stability analysis revealed that shot noise was the most critical factor affecting the classification performance. It indicated that this impact could be avoided in future SI systems with a camera sensor whose saturation level is higher than 106, or by postimage processing.

Cluster randomised-control trial for an Australian child protection education program: Study protocol for the Learn to be safe with Emmy and friends™

Background Child maltreatment has severe short-and long-term consequences for children’s health, development, and wellbeing. Despite the provision of child protection education programs in many countries, few have been rigorously evaluated to determine their effectiveness. We describe the design of a multi-site gold standard evaluation of an Australian school-based child protection education program. The intervention has been developed by a not-for-profit agency and comprises 5 1-h sessions delivered to first grade students (aged 5–6 years) in their regular classrooms. It incorporates common attributes of effective programs identified in the literature, and aligns with the Australian education curriculum. Methods/Design A three-site cluster randomised controlled trial (RCT) of Learn to be safe with Emmy and friends™ will be conducted with children in approximately 72 first grade classrooms in 24 Queensland primary (elementary) schools from three state regions, over a period of 2 years. Entire schools will be randomised, using a computer generated list of random numbers, to intervention and wait-list control conditions, to prevent contamination effects across students and classes. Data will be collected at baseline (pre-assessment), immediately after the intervention (post-assessment), and at 6-, 12-, and 18-months (follow-up assessments). Outcome assessors will be blinded to group membership. Primary outcomes assessed are children’s knowledge of program concepts; intentions to use program knowledge, skills, and help-seeking strategies; actual use of program material in a simulated situation; and anxiety arising from program participation. Secondary outcomes include a parent discussion monitor, parent observations of their children’s use of program materials, satisfaction with the program, and parental stress. A process evaluation will be conducted concurrently to assess program performance. Discussion This RCT addresses shortcomings in previous studies and methodologically extends research in this area by randomising at school-level to prevent cross-learning between conditions; providing longer-term outcome assessment than any previous study; examining the degree to which parents/guardians discuss intervention content with children at home; assessing potential moderating/mediating effects of family and child demographic variables; testing an in-vivo measure to assess children’s ability to discriminate safe/unsafe situations and disclose to trusted adults; and testing enhancements to existing measures to establish greater internal consistency.

Human error risk management methodology for rail crack incidents

The paper presents an innovative approach to modelling the causal relationships of human errors in rail crack incidents (RCI) from a managerial perspective. A Bayesian belief network is developed to model RCI by considering the human errors of designers, manufactures, operators and maintainers (DMOM) and the causal relationships involved. A set of dependent variables whose combinations express the relevant functions performed by each DMOM participant is used to model the causal relationships. A total of 14 RCI on Hong Kong’s mass transit railway (MTR) from 2008 to 2011 are used to illustrate the application of the model. Bayesian inference is used to conduct an importance analysis to assess the impact of the participants’ errors. Sensitivity analysis is then employed to gauge the effect the increased probability of occurrence of human errors on RCI. Finally, strategies for human error identification and mitigation of RCI are proposed. The identification of ability of maintainer in the case study as the most important factor influencing the probability of RCI implies the priority need to strengthen the maintenance management of the MTR system and that improving the inspection ability of the maintainer is likely to be an effective strategy for RCI risk mitigation.

Design based research methodology for teaching with technology in English

Design based research (DBR) is an appropriate method for small scale educational research projects involving collaboration between teachers, students and researchers. It is particularly useful in collaborative projects where an intervention is implemented and evaluated in a grounded context. The intervention can be technological, or a new program required by policy changes. It can be applied to educational contexts, such as when English teachers undertake higher degree research projects in their own or others’ sites; or for academics working collaboratively as researchers with teams of teachers. In the case described here the paper shows that DBR is designed to make a difference in the real world contexts in which occurs.

Journalism, media & communication network: Final report 2015

The JoMeC Network project had three key objectives. These were to: 1. Benchmark the pedagogical elements of journalism, media and communication (JoMeC) programs at Australian universities in order to develop a set of minimum academic standards, to be known as Threshold Learning Outcomes (TLOs), which would applicable to the disciplines of Journalism, Communication and/or Media Studies, and Public Relations; 2. Build a learning and teaching network of scholars across the JoMeC disciplines to support collaboration, develop leadership potential among educators, and progress shared priorities; 3. Create an online resources hub to support learning and teaching excellence and foster leadership in learning and teaching in the JoMeC disciplines. In order to benchmark the pedagogical elements of the JoMeC disciplines, the project started with a comprehensive review of the disciplinary settings of journalism, media and communication-related programs within Higher Education in Australia plus an analysis of capstone units (or subjects) offered in JoMeC-related degrees. This audit revealed a diversity of degree titles, disciplinary foci, projected career outcomes and pedagogical styles in the 36 universities that offered JoMeC-related degrees in 2012, highlighting the difficulties of classifying the JoMeC disciplines collectively or singularly. Instead of attempting to map all disciplines related to journalism, media and communication, the project team opted to create generalised TLOs for these fields, coupled with detailed TLOs for bachelor-level qualifications in three selected JoMeC disciplines: Journalism, Communication and/or Media Studies, and Public Relations. The initial review’s outcomes shaped the methodology that was used to develop the TLOs. Given the complexity of the JoMeC disciplines and the diversity of degrees across the network, the project team deployed an issue-framing process to create TLO statements. This involved several phases, including discussions with an issue-framing team (an advisory group of representatives from different disciplinary areas); research into accreditation requirements and industry-produced materials about employment expectations; evaluation of learning outcomes from universities across Australia; reviews of scholarly literature; as well as input from disciplinary leaders in a variety of forms. Draft TLOs were refined after further consultation with industry stakeholders and the academic community via email, telephone interviews, and meetings and public forums at conferences. This process was used to create a set of common TLOs for JoMeC disciplines in general and extended TLO statements for the specific disciplines of Journalism and Public Relations. A TLO statement for Communication and/or Media Studies remains in draft form. The Australian and New Zealand Communication Association (ANZCA) and Journalism Education and Research Association of Australian (JERAA) have agreed to host meetings to review, revise and further develop the TLOs. The aim is to support the JoMeC Network’s sustainability and the TLOs’ future development and use.

HealthMap: A cluster randomised trial of interactive health plans and self-management support to prevent coronary heart disease in people with HIV

Background The leading causes of morbidity and mortality for people in high-income countries living with HIV are now non-AIDS malignancies, cardiovascular disease and other non-communicable diseases associated with ageing. This protocol describes the trial of HealthMap, a model of care for people with HIV (PWHIV) that includes use of an interactive shared health record and self-management support. The aims of the HealthMap trial are to evaluate engagement of PWHIV and healthcare providers with the model, and its effectiveness for reducing coronary heart disease risk, enhancing self-management, and improving mental health and quality of life of PWHIV. Methods/Design The study is a two-arm cluster randomised trial involving HIV clinical sites in several states in Australia. Doctors will be randomised to the HealthMap model (immediate arm) or to proceed with usual care (deferred arm). People with HIV whose doctors are randomised to the immediate arm receive 1) new opportunities to discuss their health status and goals with their HIV doctor using a HealthMap shared health record; 2) access to their own health record from home; 3) access to health coaching delivered by telephone and online; and 4) access to a peer moderated online group chat programme. Data will be collected from participating PWHIV (n = 710) at baseline, 6 months, and 12 months and from participating doctors (n = 60) at baseline and 12 months. The control arm will be offered the HealthMap intervention at the end of the trial. The primary study outcomes, measured at 12 months, are 1) 10-year risk of non-fatal acute myocardial infarction or coronary heart disease death as estimated by a Framingham Heart Study risk equation; and 2) Positive and Active Engagement in Life Scale from the Health Education Impact Questionnaire (heiQ). Discussion The study will determine the viability and utility of a novel technology-supported model of care for maintaining the health and wellbeing of people with HIV. If shown to be effective, the HealthMap model may provide a generalisable, scalable and sustainable system for supporting the care needs of people with HIV, addressing issues of equity of access. Trial registration Universal Trial Number (UTN) U111111506489; ClinicalTrial.gov Id NCT02178930 submitted 29 June 2014

General Practitioner Antimicrobial Stewardship Programme Study (GAPS): protocol for a cluster randomised controlled trial

Background There is a strong link between antibiotic consumption and the rate of antibiotic resistance. In Australia, the vast majority of antibiotics are prescribed by general practitioners, and the most common indication is for acute respiratory infections. The aim of this study is to assess if implementing a package of integrated, multifaceted interventions reduces antibiotic prescribing for acute respiratory infections in general practice. Methods/design This is a cluster randomised trial comparing two parallel groups of general practitioners in 28 urban general practices in Queensland, Australia: 14 intervention and 14 control practices. The protocol was peer-reviewed by content experts who were nominated by the funding organization. This study evaluates an integrated, multifaceted evidence-based package of interventions implemented over a six month period. The included interventions, which have previously been demonstrated to be effective at reducing antibiotic prescribing for acute respiratory infections, are: delayed prescribing; patient decision aids; communication training; commitment to a practice prescribing policy for antibiotics; patient information leaflet; and near patient testing with C-reactive protein. In addition, two sub-studies are nested in the main study: (1) point prevalence estimation carriage of bacterial upper respiratory pathogens in practice staff and asymptomatic patients; (2) feasibility of direct measures of antibiotic resistance by nose/throat swabbing. The main outcome data are from Australia’s national health insurance scheme, Medicare, which will be accessed after the completion of the intervention phase. They include the number of antibiotic prescriptions and the number of patient visits per general practitioner for periods before and during the intervention. The incidence of antibiotic prescriptions will be modelled using the numbers of patients as the denominator and seasonal and other factors as explanatory variables. Results will compare the change in prescription rates before and during the intervention in the two groups of practices. Semi-structured interviews will be conducted with the general practitioners and practice staff (practice nurse and/or practice manager) from the intervention practices on conclusion of the intervention phase to assess the feasibility and uptake of the interventions. An economic evaluation will be conducted to estimate the costs of implementing the package, and its cost-effectiveness in terms of cost per unit reduction in prescribing. Discussion The results on the effectiveness, cost-effectiveness, acceptability and feasibility of this package of interventions will inform the policy for any national implementation.

Deeper and wider fully convolutional network coupled with conditional random fields for scene labeling

Deep convolutional neural networks (DCNNs) have been employed in many computer vision tasks with great success due to their robustness in feature learning. One of the advantages of DCNNs is their representation robustness to object locations, which is useful for object recognition tasks. However, this also discards spatial information, which is useful when dealing with topological information of the image (e.g. scene labeling, face recognition). In this paper, we propose a deeper and wider network architecture to tackle the scene labeling task. The depth is achieved by incorporating predictions from multiple early layers of the DCNN. The width is achieved by combining multiple outputs of the network. We then further refine the parsing task by adopting graphical models (GMs) as a post-processing step to incorporate spatial and contextual information into the network. The new strategy for a deeper, wider convolutional network coupled with graphical models has shown promising results on the PASCAL-Context dataset.

Do SMEs cluster around innovation activities? Discovering active, incremental and opportunistic innovators

Do SMEs cluster around different types of innovation activities? Are there patterns of SME innovation activities? To investigate we develop a taxonomy of innovation activities in SMEs using a qualitative study, followed by a survey. First, based upon our qualitative research and literature review we develop a comprehensive list of innovation activities SMEs typically engage in. We then conduct a factor analysis to determine if these activities can be combined into factors. We identify three innovation activity factors: R&D activities, incremental innovation activities and cost innovation activities. We use these factors to identify three clusters of firms engaging in similar innovation activities: active innovators, incremental innovators and opportunistic innovators. The clusters are enriched by validating that they also exhibit significant internal similarities and external differences in their innovation skills, demographics, industry segments and family business ownership. This research contributes to innovation and SME theory and practice by identifying SME clusters based upon their innovation activities.