Dynamics of reverse salience as technological performance gap: An empirical study of the personal computer technology system

The evolution of technological systems is hindered by systemic components, referred to as reverse salients, which fail to deliver the necessary level of technological performance thereby inhibiting the performance delivery of the system as a whole. This paper develops a performance gap measure of reverse salience and applies this measurement in the study of the PC (personal computer) technological system, focusing on the evolutions of firstly the CPU (central processing unit) and PC game sub-systems, and secondly the GPU (graphics processing unit) and PC game sub-systems. The measurement of the temporal behavior of reverse salience indicates that the PC game sub-system is the reverse salient, continuously trailing behind the technological performance of the CPU and GPU sub-systems from 1996 through 2006. The technological performance of the PC game sub-system as a reverse salient trails that of the CPU sub-system by up to 2300 MHz with a gradually decreasing performance disparity in recent years. In contrast, the dynamics of the PC game sub-system as a reverse salient trails the GPU sub-system with an ever increasing performance gap throughout the timeframe of analysis. In addition, we further discuss the research and managerial implications of our findings.

Computer analysis of impact behavior of concrete filled steel tube columns

This paper presents a numerical study of the response of axially loaded concrete filled steel tube (CFST) columns under lateral impact loading using explicit non-linear finite element techniques. The aims of this paper are to evaluate the vulnerability of existing columns to credible impact events as well as to contribute new information towards the safe design of such vulnerable columns. The model incorporates concrete confinement, strain rate effects of steel and concrete, contact between the steel tube and concrete and dynamic relaxation for pre-loading, which is a relatively recent method for applying a pre-loading in the explicit solver. The finite element model was first verified by comparing results with existing experimental results and then employed to conduct a parametric sensitivity analysis. The effects of various structural and load parameters on the impact response of the CFST column were evaluated to identify the key controlling factors. Overall, the major parameters which influence the impact response of the column are the steel tube thickness to diameter ratio, the slenderness ratio and the impact velocity. The findings of this study will enhance the current state of knowledge in this area and can serve as a benchmark reference for future analysis and design of CFST columns under lateral impact.

Review and future options for computer modelling in the sugar industry

Computer modelling has been used extensively in some processes in the sugar industry to achieve significant gains. This paper reviews the investigations carried out over approximately the last twenty five years, including the successes but also areas where problems and delays have been encountered. In that time the capability of both hardware and software have increased dramatically. For some processes such as cane cleaning, cane billet preparation, and sugar drying, the application of computer modelling towards improved equipment design and operation has been quite limited. A particular problem has been the large number of particles and particle interactions in these…

Digital literacy in theory, policy and practice: Old concerns, new opportunities

The increasing ubiquity and use of digital technologies across social and cultural life is a key challenge for educators engaged in helping students develop a range of literacies useful for school and beyond. Many young people's experience of communication and participation is now shaped by almost constant engagements with digital technologies and media, as well as with global digital cultures. This increasing access and use has given many young people the opportunity to engage deeply with global media cultures via popular music, television and film franchises, the worldwide computer games industry, or countless other subcultures that connect fans and interested others from around the world via the internet. 'Digital literacy' is often the term associated with the ability to traverse these, and other, online and offline worlds; the notion has long been synonymous with the idea that digital technologies now mediate perhaps a majority of our social interactions. These forms of engagement with the world have important implications for educators and school systems which have historically recognised only a very narrow set of legitimate literacies.

Turning gaming EEG peripherals into trainable brain computer interfaces

Companies such as NeuroSky and Emotiv Systems are selling non-medical EEG devices for human computer interaction. These devices are significantly more affordable than their medical counterparts, and are mainly used to measure levels of engagement, focus, relaxation and stress. This information is sought after for marketing research and games. However, these EEG devices have the potential to enable users to interact with their surrounding environment using thoughts only, without activating any muscles. In this paper, we present preliminary results that demonstrate that despite reduced voltage and time sensitivity compared to medical-grade EEG systems, the quality of the signals of the Emotiv EPOC neuroheadset is sufficiently good in allowing discrimina tion between imaging events. We collected streams of EEG raw data and trained different types of classifiers to discriminate between three states (rest and two imaging events). We achieved a generalisation error of less than 2% for two types of non-linear classifiers.

Computer-assisted sampling of acoustic data for more efficient determination of bird species richness

Bird species richness survey is one of the most intriguing ecological topics for evaluating environmental health. Here, bird species richness denotes the number of unique bird species in a particular area. Factors affecting the investigation of bird species richness include weather, observation bias, and most importantly, the prohibitive costs of conducting surveys at large spatiotemporal scales. Thanks to advances in recording techniques, these problems have been alleviated by deploying sensors for acoustic data collection. Although automated detection techniques have been introduced to identify various bird species, the innate complexity of bird vocalizations, the background noise present in the recording and the escalating volumes of acoustic data pose a challenging task on determination of bird species richness. In this paper we proposed a two-step computer-assisted sampling approach for determining bird species richness in one-day acoustic data. First, a classification model is built based on acoustic indices for filtering out minutes that contain few bird species. Then the classified bird minutes are ordered by an acoustic index and the redundant temporal minutes are removed from the ranked minute sequence. The experimental results show that our method is more efficient in directing experts for determination of bird species compared with the previous methods.

Fusion of worlds?: Consumers' self-narrative in a hybrid digital/physical world

As the Internet becomes deeply embedded in consumers' life and continuously accessed through mobile devices, the boundary between the digital and the physical becomes less defined. This thesis investigates how this blurring boundary impacts on consumers' construction of their self-narrative and found that consumers' narrative is paradoxically coherent and fragmented and depicts a heroic story of the self. Prior studies show consumers achieve their desired life story through meaningful consumption, however, the notion of fragmented lives are challenged. Further, extensive digital leisure consumption is often viewed in a less positive light. Nevertheless, consumers, who significantly consume digital leisure, do not disregard their physical world or favour one space over the other. Rather, they negotiate key aspects from their digital and physical lives and fluidly move between these two worlds, creating a hybrid narrative that saves their self and others.

Autonomous UAVs wildlife detection using thermal imaging, predictive navigation and computer vision

There is an increased interest on the use of Unmanned Aerial Vehicles (UAVs) for wildlife and feral animal monitoring around the world. This paper describes a novel system which uses a predictive dynamic application that places the UAV ahead of a user, with a low cost thermal camera, a small onboard computer that identifies heat signatures of a target animal from a predetermined altitude and transmits that target’s GPS coordinates. A map is generated and various data sets and graphs are displayed using a GUI designed for easy use. The paper describes the hardware and software architecture and the probabilistic model for downward facing camera for the detection of an animal. Behavioral dynamics of target movement for the design of a Kalman filter and Markov model based prediction algorithm are used to place the UAV ahead of the user. Geometrical concepts and Haversine formula are applied to the maximum likelihood case in order to make a prediction regarding a future state of the user, thus delivering a new way point for autonomous navigation. Results show that the system is capable of autonomously locating animals from a predetermined height and generate a map showing the location of the animals ahead of the user.

A computer code for enclosed natural convection in the boundary layer regime

A computer code is developed for the numerical prediction of natural convection in rectangular two-dimensional cavities at high Rayleigh numbers. The governing equations are retained in the primitive variable form. The numerical method is based on finite differences and an ADI scheme. Convective terms may be approximated with either central or hybrid differencing for greater stability. A non-uniform grid distribution is possible for greater efficiency. The pressure is dealt with via a SIMPLE type algorithm and the use of a fast elliptic solver for the solenoidal velocity correction field significantly reduces computing times. Preliminary results indicate that the code is reasonably accurate, robust and fast compared with existing benchmarks and finite difference based codes, particularly at high Rayleigh numbers. Extension to three-dimensional problems and turbulence studies in similar geometries is readily possible and indicated.

Open source computer-vision based guidance system for UAVs on-board decision making

The use of UAVs for remote sensing tasks; e.g. agriculture, search and rescue is increasing. The ability for UAVs to autonomously find a target and perform on-board decision making, such as descending to a new altitude or landing next to a target is a desired capability. Computer-vision functionality allows the Unmanned Aerial Vehicle (UAV) to follow a designated flight plan, detect an object of interest, and change its planned path. In this paper we describe a low cost and an open source system where all image processing is achieved on-board the UAV using a Raspberry Pi 2 microprocessor interfaced with a camera. The Raspberry Pi and the autopilot are physically connected through serial and communicate via MAVProxy. The Raspberry Pi continuously monitors the flight path in real time through USB camera module. The algorithm checks whether the target is captured or not. If the target is detected, the position of the object in frame is represented in Cartesian coordinates and converted into estimate GPS coordinates. In parallel, the autopilot receives the target location approximate GPS and makes a decision to guide the UAV to a new location. This system also has potential uses in the field of Precision Agriculture, plant pest detection and disease outbreaks which cause detrimental financial damage to crop yields if not detected early on. Results show the algorithm is accurate to detect 99% of object of interest and the UAV is capable of navigation and doing on-board decision making.

Mixed reality stories: How creative writers integrate virtual and physical realities

Mixed reality stories (MRS) unfold simultaneously in the physical and the virtual world. Advancements in digital technologies, which are now able to capture more contextual information about our physical environments, are enabling novel ways of blending the two worlds. To explore the process of creating stories from this perspective, we conducted a study with creative writers, in which we asked them to write a MRS script for outdoor running. While we saw instances of intentional connections between physical and virtual worlds in their work, we also observed the use of ambiguity or even deliberate contradiction with available contextual information. In this paper we discuss how these approaches can be beneficial for MRS and propose directions for future work.

The Situated Cases

In this chapter, we meet the eight children whose documented lives are the heart of this book. The children are spread across 6 continents, so we have some textual traveling to do. We find each child in a local school. There they venture into literacy along official paths negotiated with their teachers and, also, along unofficial paths tied to their desire for peer companionship and social belonging (Corsaro, 2011; Nelson, 2007). We are most interested in their literate productions—their composing, be it with stick and dirt, pencil, crayons, and paper, tablet computer, or chalk and slate. Each child is a unique story, and each story is told by an author with particular interests in the goings-on in school, that is, with a particular angle of vision. All the authors, though, take us into a child’s educational circumstance; they give us a sense of the school’s physical site and its official curricular guidelines. Most importantly, they collectively allow us a global view of children as symbol users and social participants in the official and the unofficial worlds of school. No matter where young children go to school, they are expected to learn to “write” (although writing, as the cases illustrate, does not always mean “composing”)...

Animated Mise-en-scene and aesthetic harmony: An expansion of the traditional principles of animation to 3D computer animation

3D Computer Graphics (CG) has become the dominant medium for modern animated feature films. It is widely understood that traditional principles of animation developed in the 1930s at the Walt Disney Studio remain applicable to this new medium and heavily influence the range of aesthetic motion styles in contemporary animation. Via a frame-by-frame textual analysis of four animated feature films, this thesis tests and confirms the validity of the principles of animation and expands upon them by reinterpreting the Disney principle of appeal as aesthetic harmony, which delineates the way in which character posing and transitions between poses contribute to the animated motion styles that animators work in today.

Project Energise: Using participatory approaches and real time computer prompts to reduce occupational sitting and increase work time physical activity in office workers

Objectives This efficacy study assessed the added impact real time computer prompts had on a participatory approach to reduce occupational sedentary exposure and increase physical activity. Design Quasi-experimental. Methods 57 Australian office workers (mean [SD]; age = 47 [11] years; BMI = 28 [5] kg/m2; 46 men) generated a menu of 20 occupational ‘sit less and move more’ strategies through participatory workshops, and were then tasked with implementing strategies for five months (July–November 2014). During implementation, a sub-sample of workers (n = 24) used a chair sensor/software package (Sitting Pad) that gave real time prompts to interrupt desk sitting. Baseline and intervention sedentary behaviour and physical activity (GENEActiv accelerometer; mean work time percentages), and minutes spent sitting at desks (Sitting Pad; mean total time and longest bout) were compared between non-prompt and prompt workers using a two-way ANOVA. Results Workers spent close to three quarters of their work time sedentary, mostly sitting at desks (mean [SD]; total desk sitting time = 371 [71] min/day; longest bout spent desk sitting = 104 [43] min/day). Intervention effects were four times greater in workers who used real time computer prompts (8% decrease in work time sedentary behaviour and increase in light intensity physical activity; p < 0.01). Respective mean differences between baseline and intervention total time spent sitting at desks, and the longest bout spent desk sitting, were 23 and 32 min/day lower in prompt than in non-prompt workers (p < 0.01). Conclusions In this sample of office workers, real time computer prompts facilitated the impact of a participatory approach on reductions in occupational sedentary exposure, and increases in physical activity.