We still don’t know how much BPMN is enough – but we are getting closer

Process models expressed in BPMN typically rely on a small subset of all available symbols. In our 2008 study, we examined the composition of these subsets, and found that the distribution of BPMN symbols in practice closely resembles the frequency distribution of words in natural language. We offered some suggestions based on our findings, how to make the use of BPMN more manageable and also outlined ideas for further development of BPMN. Since this paper was published it has provoked spirited debate in the BPM practitioner community, prompted the definition of a modeling standard in US government, and helped shape the next generation of the BPMN standard.

Reconstructing 3D x-ray CT images of polymer gel dosimeters using the zero-scan method

In this study x-ray CT has been used to produce a 3D image of an irradiated PAGAT gel sample, with noise-reduction achieved using the ‘zero-scan’ method. The gel was repeatedly CT scanned and a linear fit to the varying Hounsfield unit of each pixel in the 3D volume was evaluated across the repeated scans, allowing a zero-scan extrapolation of the image to be obtained. To minimise heating of the CT scanner’s x-ray tube, this study used a large slice thickness (1 cm), to provide image slices across the irradiated region of the gel, and a relatively small number of CT scans (63), to extrapolate the zero-scan image. The resulting set of transverse images shows reduced noise compared to images from the initial CT scan of the gel, without being degraded by the additional radiation dose delivered to the gel during the repeated scanning. The full, 3D image of the gel has a low spatial resolution in the longitudinal direction, due to the selected scan parameters. Nonetheless, important features of the dose distribution are apparent in the 3D x-ray CT scan of the gel. The results of this study demonstrate that the zero-scan extrapolation method can be applied to the reconstruction of multiple x-ray CT slices, to provide useful 2D and 3D images of irradiated dosimetry gels.

Monte Carlo-based diode design for correction-less small field dosimetry

Due to their small collecting volume diodes are commonly used in small field dosimetry. However the relative sensitivity of a diode increases with decreasing small field size. Conversely, small air gaps have been shown to cause a significant decrease in the sensitivity of a detector as the field size is decreased. Therefore this study uses Monte Carlo simulations to look at introducing air upstream to diodes such that they measure with a constant sensitivity across all field sizes in small field dosimetry. Varying thicknesses of air were introduced onto the upstream end of two commercial diodes (PTW 60016 photon diode and PTW 60017 electron diode), as well as a theoretical unenclosed silicon chip using field sizes as small as 5 mm × 5 mm . The metric D_(w,Q)/D_(Det,Q) used in this study represents the ratio of the dose to a point of water to the dose to the diode active volume, for a particular field size and location. The optimal thickness of air required to provide a constant sensitivity across all small field sizes was found by plotting D_(w,Q)/D_(Det,Q) as a function of introduced air gap size for various field sizes, and finding the intersection point of these plots. That is, the point at which D_(w,Q)/D_(Det,Q) was constant for all field sizes was found. The optimal thickness of air was calculated to be 3.3 mm, 1.15 mm and 0.10 mm for the photon diode, electron diode and unenclosed silicon chip respectively. The variation in these results was due to the different design of each detector. When calculated with the new diode design incorporating the upstream air gap, k_(Q_clin 〖,Q〗_msr)^(f_clin 〖,f〗_msr ) was equal to unity to within statistical uncertainty (0.5 %) for all three diodes. Cross-axis profile measurements were also improved with the new detector design. The upstream air gap could be implanted on the commercial diodes via a cap consisting of the air cavity surrounded by water equivalent material. The results for the unclosed silicon chip show that an ideal small field dosimetry diode could be created by using a silicon chip with a small amount of air above it.

The role for police in addressing alcohol-related harm inside and outside licensed premises

Alcohol consumption is enmeshed with Australian culture (Palk, 2008) and the use and misuse of alcohol contributes to considerable health and social harms (Barbor et al., 2010; English et al., 1995; Gutjahr, Gmel, & Rehm, 2001; Palk, 2008; Steenkamp, Harrison, & Allsop, 2002). Despite shifts in the way that alcohol is consumed and how it is used, it has been reported that one-third of all alcohol consumed is done so within licensed premises (Lang, Stockwell, Rydon, & Gamble, 1992). Consequently, licensed premises are over-represented as settings in which alcohol-related harms occur. These harms, particularly those related to violence, are associated with particular licensed premises operating in the night-time economy (Briscoe & Donnelly, 2001b; Chikritzhs, Stockwell, & Masters, 1997; Homel, Tomsen, & Thommeny, 1991; Stockwell, 1997). Police have a role in not only responding to the manifestation of harms, such as crime, injuries, assaults, domestic violence, stealing and sexual offences, but they also have a role in preventing problems, and thereby reducing alcohol and other drug-related harms (Doherty & Roche, 2003). Given the extent of alcohol consumption within licensed premises and the nature and extent of the harms, as well as the lack of opportunity to influence outcomes in other settings (e.g. the home), licensed premises offer police and other stakeholders a significant opportunity to influence positively the reduction of alcoholrelated harm. This research focuses specifically on the police role in policing licensed premises. Primarily, this research aims to investigate the factors which are relevant to why and how police officers respond to alcohol-related incidents inside and outside licensed premises. It examines the attitudes and beliefs of police and assesses their knowledge, capacity and ability to effectively police licensed premises. The research methodology uses three distinct surveys. Each contributes to understanding the motivations and practice of police officers in this important area of harm reduction. Study One involved a survey of police officers within a police district (Brisbane Central District) in Queensland, Australia and used a comprehensive questionnaire involving both quantitative and qualitative techniques. A key research outcome of Study One was the finding that officers had low levels of knowledge of the strategies that are effective in addressing alcohol-related harm both inside and outside licensed premises. Paradoxically, these officers also reported extensive recent experience in dealing with alcohol issues in these locations. In addition, these officers reported that alcohol was a significant contextual factor in the majority of matters to which they responded. Officers surveyed reported that alcohol increased the difficulty of responding to situations and that licensed premises (e.g. nightclubs, licensed clubs and hotels) were the most difficult contexts to police. Those surveyed were asked to self-assess their knowledge of the Liquor Act (Qld), which is the primary legislative authority in Queensland for regulating licensed premises. Surprisingly, well over half of the officers (65%) reported ‘no’ to ‘fair’ knowledge of the Act, despite officers believing that their skill level to police such premises was in the ‘good to very good range’. In an important finding, officers reported greater skill level to police outside licensed premises than inside such premises, indicating that officers felt less capable, from a skill perspective, to operate within the confines of a licensed premise than in the environment immediately outside such premises. Another key finding was that officers reported greater levels of training in responding to situations outside and around licensed premises than to situations inside licensed premises. Officers were also asked to identify the frequency with which they employed specified regulatory enforcement and community-based strategies. Irrespective of the type of response, ‘taking no action’ or passive policing interventions were not favoured by officers. The findings identified that officers favoured taking a range of strategies (sending home, releasing into the custody of friends, etc.) in preference to arrest. In another key finding, officers generally reported their support for operational stakeholder partnership approaches to policing licensed premises. This was evidenced by the high number of officers (over 90%) reporting that there should be shared responsibility for enforcing the provisions of the Liquor Act. Importantly, those surveyed also identified the factors which constrain or prevent them from policing licensed premises. Study Two involved interviewing a small but comprehensive group (n=11) of senior managers from within the Queensland Police Service (QPS) who have responsibility for setting operational and strategic policy. The aim of this study was to examine the attitudes, perceptions and influence that senior officers (at the strategy and policy-setting level) had on the officers at the operational level. This qualitative study was carried out using a purposive sampling (Denzin & Lincoln, 2005; Guba & Lincoln, 1989), focused interview and thematic analytic approach. The interview participants were drawn from three tiers of management at district, regional as well as the whole-of-organisational level. The first key theme emerging from the study related to role, in terms of both the QPS broader organisational role, and the individual officer role with respect to the policing of licensed premises. For the QPS organisational role, participants at all three strategic levels had a high degree of congruity as to the organisations service role; that is, to enhance public safety. With respect to participants’ beliefs as to whether police officers have knowledge and understanding of their individual roles concerning licensed premises (as opposed to the QPS role), participants reported most commonly that officers had a reasonable to clear understanding of their role. Participant comments also were supportive of the view that officers operating in the research area, Brisbane Central District (BCD), had a clearer understanding of their role than police operating in other locations. The second key theme to emerge identified a disparity between the knowledge and capability of specialist police, compared with general duties police, to police licensed premises. In fact, a number of the responses to a variety of questions differentiated specialist and general police in a range of domains. One such example related to the clarity of understanding of officer role. Participants agreed that specialist police (Liquor Enforcement & Proactive Strategies [LEAPS] officers) had more clarity of understanding in terms of their role than generalist police. Participants also were strongly of the opinion that specialist police had higher skill levels to deal with issues both inside and outside licensed premises. Some participants expressed the view that general duty police undertook purely response-related activities, or alternatively, dealt with lower order matters. Conversely, it was viewed that specialist police undertook more complex tasks because of their higher levels of knowledge and skill. The third key theme to emerge concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Participant responses strongly indicated that there was a diversity of resourcing barriers that restrict police from undertaking their roles in licensed premises. Examples of such barriers were the lack of police and the low ratio of police to patrons, available officer time, and lack of organisational investment in skills and knowledge acquisition. However, some participants indicated that police resourcing in the BCD was appropriate and officers were equipped with sufficient powers (policy and legislation). Again, the issue of specialist police was raised by one participant who argued that increasing the numbers of specialist police would ameliorate the difficulties for police officers policing licensed premises. The fourth and last key theme to emerge from Study Two related to the perception of senior officers regarding the opportunity and capability of officers to leverage off external partnerships to reduce harms inside and outside licensed premises. Police working in partnership in BCD was seen as an effective harm reduction strategy and strongly supported by the participants. All participants demonstrated a high degree of knowledge as to who these partners were and could identify those government, non-government and community groups precisely. Furthermore, the majority of participants also held strong views that the partnerships were reasonably effective and worked to varying degrees depending on the nature of the partnership and issues such as resourcing. These senior officers identified better communication and coordination as factors that could potentially strengthen these partnerships. This research finding is particularly important for senior officers who have the capacity to shape the policy and strategic direction of the police service, not only in Queensland but throughout Australasia. Study Three examined the perceptions of those with links to the broader liquor industry (government, non-government and community but exclusive of police) concerning their understanding of the police role and the capacity of police to reduce alcohol-related harm inside and outside licensed premises, and their attitudes towards police. Participants (n=26) surveyed represented a range of areas including the liquor industry, business represenatives and government representatives from Queensland Fire and Rescue Service, Queensland Ambulance Service, Brisbane City Council and Queensland Health. The first key theme to emerge from Study Three related to participant understanding of the QPS organisational role, and importantly, individual officer role in policing licensed premises. In terms of participant understanding of the QPS role there was a clear understanding by the majority of participants that the police role was to act in ways consistent with the law and to otherwise engage in a range of enforcement-related activities. Participants saw such activities falling into two categories. The first category related to reactive policing, which included actions around responding to trouble in licensed premises, monitoring crowd controllers and removing trouble-makers. In the second category, proactive approaches, participants identified the following activities as consistent with that approach: early intervention with offenders, support of licensed premises operators and high visibility policing. When participants were asked about their understanding of individual officer roles in the policing of licensed premises, a range of responses were received but the consistent message that emerged was that there is a different role to be played by general duty (uniformed) police compared to specialist (LEAPS Unit) police, which reflects differences in knowledge, skill and capability. The second key theme that emerged from the data related to the external participants’ views of the knowledge and capability of specialist police, compared with general duty police, to police licensed premises. As noted in the first key theme, participants were universally of the view that the knowledge, skill and capability of police in specialist units (LEAPS Unit) was at a higher level than that of general duty police. Participants observed that these specialist officers were better trained than their colleagues in generalist areas and were therefore better able to intervene knowledgeably and authoritatively to deal with problems and issues as they emerged. Participants also reported that officers working within BCD generally had a positive attitude to their duties and had important local knowledge that they could use in the resolution of alcohol-related issues. Participants also commented on the importance of sound and effective QPS leadership, as well as the quality of the leadership in BCD. On both these measures, there was general consensus from participants, who reported positively on the importance and effectiveness of such leadership in BCD. The third key theme to emerge from Study Three concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Overwhelmingly, external participants reported the lack of human resources (i.e. police officers) as the key barrier. Other resourcing limitations, such as available officer time, police computer systems, and the time taken to charge offenders, were identified as barriers. Some participants identified barriers in the liquor industry such as ‘dodgy operators’ and negative media attention as limitations. Other constraints to emerge related to government and policy barriers. These were reflected in comments about the collection by government of fees from licensees and better ‘powers’ for police to deal with offenders. The fourth and final key theme that emerged from Study Three related to the opportunities for and capability of police to leverage off external partnerships to reduce harms inside and outside licensed premises. Not surprisingly, participants had a comprehensive knowledge of a broad range of stakeholders, from a diversity of contexts, influential in addressing issues in licensed premises. Many participants reported their relationships with the police and other stakeholders as effective, productive and consistent with the objectives of partnering to reduce alcohol-related harm. On the other hand, there were those who were concerned with their relationship with other stakeholders, particularly those with a compliance function (e.g. Office of Liquor & Gaming Regulation [OLGR]). The resourcing limitations of partners and stakeholders were also raised as an important constraining factor in fulfilling the optimum relationship. Again, political issues were mentioned in terms of the impact on partnerships, with participants stating that there is at times political interference and that politicians complicate the relationships of stakeholders. There are some significant strengths with respect to the methodology of this research. The research is distinguished from previous work in that it examines these critical issues from three distinct perspectives (i.e. police officer, senior manager and external stakeholder). Other strengths relate to the strong theoretical framework that guides and informs the research. There are also some identified limitations, including the subjective nature of self-report data as well as the potential for bias by the author, which was controlled for using a range of initiatives. A further limitation concerns the potential for transferability and generalisability of the findings to other locations given the distinctive nature of the BCD. These limitations and issues of transferability are dealt with at length in the thesis. Despite a growing body of literature about contextual harms associated with alcohol, and specific research concerning police intervention in such contextual harms, there is still much to learn. While research on the subject of police engaging in alcohol-related incidents has focused on police behaviours and strategies in response to such issues, there is a paucity of research that focuses on the knowledge and understanding of officers engaged in such behaviours and practices. Given the scarcity of research dealing with the knowledge, skills and attitudes of police officers responding to harms inside and outside licensed premises, this research contributes significantly to what is a recent and growing body of research and literature in the field. The research makes a practical contribution to police agencies’ understanding of officer knowledge and police practice in ways that have the potential to shape education and training agendas, policy approaches around generalist versus specialist policing, strategic and operational strategy, as well as partnership engagements. The research also makes a theoretical contribution given that the research design is informed by the Three Circle

Structure character in small-carbon-cluster deposition on diamond surface

Experimentally, hydrogen-free diamond-like carbon (DLC) films were assembled by means of pulsed laser deposition (PLD), where energetic small-carbon-clusters were deposited on the substrate. In this paper, the chemisorption of energetic C2 and C10 clusters on diamond (001)-( 2×1) surface was investigated by molecular dynamics simulation. The influence of cluster size and the impact energy on the structure character of the deposited clusters is mainly addressed. The impact energy was varied from a few tens eV to 100 eV. The chemisorption of C10 was found to occur only when its incident energy is above a threshold value ( E th). While, the C2 cluster was easily to adsorb on the surface even at much lower incident energy. With increasing the impact energy, the structures of the deposited C2 and C10 are different from the free clusters. Finally, the growth of films synthesized by energetic C2 and C10 clusters were simulated. The statistics indicate the C2 cluster has high probability of adsorption and films assembled of C2 present slightly higher SP3 fraction than that of C10-films, especially at higher impact energy and lower substrate temperature. Our result supports the experimental findings. Moreover, the simulation underlines the deposition mechanism at atomic scale.

The relationship between airborne small ions and particles in urban environments

Ions play an important role in affecting climate and particle formation in the atmosphere. Small ions rapidly attach to particles in the air and, therefore, studies have shown that they are suppressed in polluted environments. Urban environments, in particular, are dominated by motor vehicle emissions and, since motor vehicles are a source of both particles and small ions, the relationship between these two parameters is not well known. In order to gain a better understanding of this relationship, an intensive campaign was undertaken where particles and small ions of both signs were monitored over two week periods at each of three sites A, B and C that were affected to varying degrees by vehicle emissions. Site A was close to a major road and reported the highest particle number and lowest small ion concentrations. Precursors from motor vehicle emissions gave rise to clear particle formation events on five days and, on each day this was accompanied by a suppression of small ions. Observations at Site B, which was located within the urban airshed, though not adjacent to motor traffic, showed particle enhancement but no formation events. Site C was a clean site, away from urban sources. This site reported the lowest particle number and highest small ion concentration. The positive small ion concentration was 10% to 40% higher than the corresponding negative value at all sites. These results confirm previous findings that there is a clear inverse relationship between small ions and particles in urban environments dominated by motor vehicle emissions.

Integrating specialised knowledge for innovation in small technology firms

Knowledge Integration (KI) is one of the major aspects driving innovation within an organisation. In this paper, we attempt to develop a better understanding of the challenges of knowledge integration within the innovation process in technology-based firms. Using four technology-based Australian firms, we investigated how knowledge integration may be managed within the context of innovation in technology firms. The literature highlights the role of four KI tasks that affect the innovation capability within technology-oriented firms, namely team building capability, capturing tacit knowledge, role of KM systems and technological systemic integration. Our findings indicate that in addition to the four tasks, a strategic approach to integrating knowledge for innovation as well as leadership and management are essential to achieving effective KI across multiple levels of engagement. Our findings also offer practical insights of how knowledge can be integrated within innovation process.

Directing democracy : competing interests and contested terrain in the John Lewis Partnership

The John Lewis Partnership is one of Europe’s largest models of employee ownership and has been operating a form of employee involvement and participation since its formation in 1929. It is frequently held up as a model of best practice (Cathcart, 2013) and has been described as a ‘workers’ paradise’ (Stummer and Lacey, 2001). At the beginning of 2012, the Deputy Prime Minister of the UK unveiled plans to create a ‘John Lewis Economy’ (Wintour, 2012). As John Lewis is being positioned at the heart of political and media discussions in the UK about alternatives to the corporate capitalist model of enterprise, it is vital that more is known about the experience of employee involvement and participation within the organisation. This article explores the ways in which the practice of employee involvement and participation has changed in John Lewis as a result of competing employee and managerial interests. Its contribution is a contemporary exploration of participation in the John Lewis Partnership and an examination of the ways in which management and employees contested the meaning and practice of employee involvement and participation as part of a ‘democracy project’, which culminated in significant changes and degeneration of the democratic structures.

The John Lewis model reveals the tensions and paradoxes at the heart of workplace democracy

Politicians of all parties have been keen to promote the ‘John Lewis model’ of industrial organisation, emphasising its features of employee ownership and workplace democracy. Dr Abby Cathcart’s research into the company shows that management and workers have different visions of what ‘partnership’ means, with ongoing struggle taking place via the organisation’s democratic structures. This, she argues, has stark implications for other organisations with partnership models that are less robust.

The CGT small business concessions : recent evidence from the perspective of the tax practitioner

On 21 September 1999 Division 152 was inserted into the Income Tax Assessment Act (1997) (ITAA 1997). It was subsequently subject to amendments in 2006. Division 152 contains the small business CGT concessions, which enables eligible small business taxpayers to reduce the amount of tax payable on capital gains arising from certain CGT events (including the sale of the small business itself) that occur after 11:45 am on 21 September 1999. One of the stated principal objectives of the legislation was to provide a concessionary regime for small business owners who did not have the same ability to access the concessionary superannuation regime (particularly the superannuation guarantee charge) generally available to employees. The then Federal Treasurer, Mr Peter Costello, when announcing the introduction of the concessions, specifically stated that the object of Div 152 was to provide “small business people with access to funds for retirement or expansion”. The purpose of this project is to: one, assess the extent to which small business taxpayers understand the CGT small business concessions, particularly when considering sale of their business; two, determine which of the four small business CGT concessions are being adopted and/or recommended by tax advisors to clients; and three, determine whether the recent superannuation changes announced by the Federal Government in relation to the capping of the concessional superannuation thresholds have had an impact on the use of the small business retirement concession. It is anticipated that the results of this study will reveal that that small business owners are reliant on their tax advisors to explain the operation of Division 152. It is plausible that give the complexity of the CGT concessions, most small business owners are completely unaware of the four small business CGT concessions contained in Division 152 and do not understand how these concessions apply. Our study will also reveal the extent to which each CGT small business concession has been adopted (and reasons why). In particular, emphasis will be placed on the adoption of the small business retirement concession contained in Subdivision 152-D (and specific reasons for its adoption). This study also seeks to understand whether the recent (and impending) changes to the concessional superannuation cap has resulted in the retirement concession being more widely adopted (or recommended) by tax advisors. We would expect that the results of our study to confirm this to be the case, particularly coupled with the recent economic downturn, which has led to lower superannuation fund balances. By providing accounting firms with this information, small business owners will benefit from the information, becoming better placed to be long-term self funded retirees, providing not only financial benefits to the individuals and the country, but a significant increase in social self-assurance by these members of the community.

Review : "Ghosts...of the Civil Dead" -- John Hillcoat

Synopsis and review of the Australian prison film Ghosts...of the Civil Dead (John Hillcoat, 1988). Drawing heavily from the book In the Belly of the Beast by American author and long-term prisoner Jack Henry Abbott, as well as from the historical and philosophical work of Michel Foucault (the credits include ‘Foucault Authority – Simon During’), Ghosts… Of the Civil Dead is a searing critique of the so-called ‘new generation’ prison system developed in the United States and recently introduced in Australia. Director John Hillcoat and producer Evan English conducted extensive research for the film, including spending time at the National Institute of Corrections, a think tank in Colorado, and visiting numerous institutions like the ‘new Alcatraz’ at Marion Illinois and other maximum security prisons across the United States. Using a mix of professionals and non-actors, including former prisoners and prison guards, the ‘story’ was workshopped during a lengthy rehearsal period with many actual events and experiences of participants incorporated into the film. The end result deliberately blurs the line between American and Australian prison experience to make the political point that what had happened in the US – from where many events and characters, and much of the architecture and design of the prison are drawn – was beginning to happen in Australia. The film emphasises the vicious cycle of institutionalisation, and highlights the role state authorities play in manufacturing, provoking and manipulating violence and fear both in prisons and in wider society as a means to augment policing and surveillance of the population, to oppress the working classes, and to maintain the political status quo...

Characterization of precursors to methanol synthesis catalysts Cu/ZnO system

The composition of a series of hydroxycarbonate precursors to copper/zinc oxide methanol synthesis catalysts prepared under conditions reported as optimum for catalytic activity has been studied. Techniques employed included thermogravimetry (TG), temperature-programmed decomposition (TPD), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and Raman and FTIR spectroscopies. Evidence was obtained for various structural phases including hydrozincite, copper hydrozincite, aurichalcite, zincian malachite and malachite (the concentrations of which depended upon the exact Cu/Zn ratio used). Significantly, previously reported phases such as gerhardite and rosasite were not identified when catalysts were synthesized at optimum solution pH and temperature values, and after appropriate aging periods. Calcination of the hydroxycarbonate precursors resulted in the formation of catalysts containing an intimate mixture of copper and zinc oxides. Temperature-programmed reduction (TPR) revealed that a number of discrete copper oxide species were present in the catalyst, the precise concentrations of which were determined to be related to the structure of the catalyst precursor. Copper hydrozincite decomposed to give zinc oxide particles decorated by highly dispersed, small copper oxide species. Aurichalcite appeared to result ultimately in the most intimately mixed catalyst structure whereas zincian malachite decomposed to produce larger copper oxide and zinc oxide grains. The reason for the stabilization of small copper oxide and zinc oxide clusters by aurichalcite was investigated by using carefully selected calcination temperatures. It was concluded that the unique formation of an 'anion-modified' oxide resulting from the initial decomposition stage of aurichalcite was responsible for the 'binding' of copper species to zinc moieties.

Spectroscopic studies of the adsorption and reactions of chlorofluorocarbons (CFC-11 and CFC-12) and hydrochlorofluorocarbon (HCFC-22) on oxide surfaces

Raman and Fourier transform infrared (FT-IR) spectroscopy have been applied to a systematic investigation of the adsorption and decomposition of dichlorodifluoromethane (CCl2F2, CFC-12), fluorotrichloromethane (CCl3F, CFC-11), chlorodifluoromethane (CHClF2, HCFC-22) and molecular chlorine on oxide surfaces. Additionally, the effects of heating and ultraviolet photolysis of the CFC and HCFCs adsorbed on the oxide surfaces have been investigated. Spectral features for these species indicated a small wavenumber shift (1-6 cm-1) associated with the adsorbed phase. Some evidence, specifically the appearance of the Raman band at 507 cm-1, is presented to show that chlorine decomposition species are associated with these oxide surfaces. It was concluded that the new spectral feature (at ca. 507 cm-1) related with the decomposition of the CFC and HCFC molecules was an important indicator of the extent to which the reaction between the adsorbed CFC and HCFC and oxide surface has taken place. The extent of CFC-surface interaction has been quantified in terms of a maximum (Raman) frequency shift parameter (AM). Wavenumber shifts suggest both cation-adsorbate and non-specific adsorption interactions are occurring in the internal channels of the zeolites. Slow decomposition of the adsorbed CFCs under ultraviolet-visible photolysis (at ? > 300 nm) and/or thermal treatment was observed spectroscopically. Using FT-IR spectroscopy, the formation of gas-phase products (CO, CO2, HCl) both onyn photolysis and heating was evident. Results of these measurements are compared with the observed atmospheric reactivity of these compounds.

Using participatory action research for heart self care amongst indigenous patients

This paper describes the initial phases of the Fluid Watchers Pacific Rim project: a participatory action research project that involves developing and trialling an iPad app to provide monitoring and self-care for Indigenous Australians with heart failure. The development phase involved working with health experts, an IT team and Indigenous heart-failure patients through three cycles of development and critical reflection. This was followed by a small pilot study to examine the app’s effectiveness. In this paper, the researchers explain why IT-supported health education can be successful in decreasing re-hospitalisation and improving self-management skills. They describe the steps they took to ensure community participation and ownership of the project and present the findings of their pilot study. This pilot project suggests that an iPad app may be a practical and successful way to provide health-care support for Indigenous Australian heart-failure patients.

A genome-wide analysis of 'Bounty' descendants implicates several novel variants in migraine susceptibility

Migraine is a common neurological disease with a complex genetic aetiology. The disease affects ~12% of the Caucasian population and females are three times more likely than males to be diagnosed. In an effort to identify loci involved in migraine susceptibility, we performed a pedigree-based genome-wide association study of the isolated population of Norfolk Island, which has a high prevalence of migraine. This unique population originates from a small number of British and Polynesian founders who are descendents of the Bounty mutiny and forms a very large multigenerational pedigree (Bellis et al.; Human Genetics, 124(5):543-5542, 2008). These population genetic features may facilitate disease gene mapping strategies (Peltonen et al.; Nat Rev Genet, 1(3):182-90, 2000. In this study, we identified a high heritability of migraine in the Norfolk Island population (h (2) = 0.53, P = 0.016). We performed a pedigree-based GWAS and utilised a statistical and pathological prioritisation approach to implicate a number of variants in migraine. An SNP located in the zinc finger protein 555 (ZNF555) gene (rs4807347) showed evidence of statistical association in our Norfolk Island pedigree (P = 9.6 × 10(-6)) as well as replication in a large independent and unrelated cohort with >500 migraineurs. In addition, we utilised a biological prioritisation to implicate four SNPs, in within the ADARB2 gene, two SNPs within the GRM7 gene and a single SNP in close proximity to a HTR7 gene. Association of SNPs within these neurotransmitter-related genes suggests a disrupted serotoninergic system that is perhaps specific to the Norfolk Island pedigree, but that might provide clues to understanding migraine more generally.