Numerical modeling of thin steel roof battens under wind uplift loads

Extreme wind events such as tropical cyclones, tornadoes and storms are more likely to impact the Australian coastal regions due to possible climate changes. Such events can be extremely destructive to building structures, in particular, low-rise buildings with lightweight roofing systems that are commonly made of thin steel roofing sheets and battens. Large wind uplift loads that act on the roofs during high wind events often cause premature roof connection failures. Recent wind damage investigations have shown that roof failures have mostly occurred at the batten to rafter or truss screw connections. In most of these cases, the screw fastener heads pulled through the bottom flanges of thin steel roof battens. This roof connection failure is very critical as both roofing sheets and battens will be lost during the high wind events. Hence, a research study was conducted to investigate this critical pull-through failure using both experimental and numerical methods. This paper presents the details of numerical modeling and the results.

Jobs for creatives outside the creative industries: A study of creatives working in the Australian manufacturing industry

More creatives work outside the creative industries than inside them. Recent Australian Census data show that 52 per cent of creatives work outside of the core creative industries. These embedded creatives make up 2 per cent of manufacturing industry employees. There is little qualitative research into embedded creatives. This paper aims to address this by exploring the contribution of creative skills to manufacturing in Australia. Through four case studies of designers and marketing staff in lighting and car seat manufacturing companies, this paper demonstrates some of the work that embedded creatives undertake in the manufacturing industry and some of the ways that they contribute to innovation. The paper also considers perspectives embedded creatives bring to manufacturing and challenges involved in being a creative worker in a non-creative industry. This research is important to economic development issues, demonstrating some of the roles of key innovators in an important industry. This work also informs the education of creative industries students who will go on to contribute in a variety of industries. Furthermore, this research exemplifies one industry where employment is available to creatives outside of the creative industries.

Public use and perceptions of emergency departments: A population survey

Objectives To inform demand management strategies aimed at reducing congestion in EDs by: (i) identifying public use of EDs, decision-making and reasons; and (ii) measuring acceptance of alternative care models. Methods A cross-sectional telephone survey of a random sample of Queensland population aged 18 years or older residing in a dwelling unit in Queensland that could be contacted on a land-based telephone service was conducted. One person per household was selected according to a predetermined algorithm to ensure sex and regional balance were interviewed. The main outcome measures were: ED use, attitudes towards ED staff and services, and alternative models of care. Results The final sample included a total of 1256 respondents (response rate = 40.3%). Twenty-one per cent attended EDs in the preceding 12 months. The decision to attend was made by patients (51%), health and medical professionals (31%), and others (18%). The main reasons included perceived severity of the illness (47%), unavailability of alternative services (26%) and better care (11%). Most respondents agreed with more flexible care models of service delivery including incentives for general practitioners (90%), private health insurance coverage for ED use (89%), and enhanced roles for paramedics and nurses. Conclusions Main reason for attending ED is perceived severity of illness, followed by lack of alternative care. The majority of both consumers and the public are in favour of more flexible care models. However, further research is necessary to detail those alternatives and to test and validate their effectiveness.

Quantitative genetic modeling of lateral ventricular shape and volume using multi-atlas fluid image alignment in twins

Despite substantial progress in measuring the 3D profile of anatomical variations in the human brain, their genetic and environmental causes remain enigmatic. We developed an automated system to identify and map genetic and environmental effects on brain structure in large brain MRI databases . We applied our multi-template segmentation approach ("Multi-Atlas Fluid Image Alignment") to fluidly propagate hand-labeled parameterized surface meshes into 116 scans of twins (60 identical, 56 fraternal), labeling the lateral ventricles. Mesh surfaces were averaged within subjects to minimize segmentation error. We fitted quantitative genetic models at each of 30,000 surface points to measure the proportion of shape variance attributable to (1) genetic differences among subjects, (2) environmental influences unique to each individual, and (3) shared environmental effects. Surface-based statistical maps revealed 3D heritability patterns, and their significance, with and without adjustments for global brain scale. These maps visualized detailed profiles of environmental versus genetic influences on the brain, extending genetic models to spatially detailed, automatically computed, 3D maps.

Comparison of fractional and geodesic anisotropy in diffusion tensor images of 90 monozygotic and dizygotic twins

We used diffusion tensor magnetic resonance imaging (DTI) to reveal the extent of genetic effects on brain fiber microstructure, based on tensor-derived measures, in 22 pairs of monozygotic (MZ) twins and 23 pairs of dizygotic (DZ) twins (90 scans). After Log-Euclidean denoising to remove rank-deficient tensors, DTI volumes were fluidly registered by high-dimensional mapping of co-registered MP-RAGE scans to a geometrically-centered mean neuroanatomical template. After tensor reorientation using the strain of the 3D fluid transformation, we computed two widely used scalar measures of fiber integrity: fractional anisotropy (FA), and geodesic anisotropy (GA), which measures the geodesic distance between tensors in the symmetric positive-definite tensor manifold. Spatial maps of intraclass correlations (r) between MZ and DZ twins were compared to compute maps of Falconer's heritability statistics, i.e. the proportion of population variance explainable by genetic differences among individuals. Cumulative distribution plots (CDF) of effect sizes showed that the manifold measure, GA, comparably the Euclidean measure, FA, in detecting genetic correlations. While maps were relatively noisy, the CDFs showed promise for detecting genetic influences on brain fiber integrity as the current sample expands.

Identification of common variants associated with human hippocampal and intracranial volumes

Identifying genetic variants influencing human brain structures may reveal new biological mechanisms underlying cognition and neuropsychiatric illness. The volume of the hippocampus is a biomarker of incipient Alzheimer's disease and is reduced in schizophrenia, major depression and mesial temporal lobe epilepsy. Whereas many brain imaging phenotypes are highly heritable, identifying and replicating genetic influences has been difficult, as small effects and the high costs of magnetic resonance imaging (MRI) have led to underpowered studies. Here we report genome-wide association meta-analyses and replication for mean bilateral hippocampal, total brain and intracranial volumes from a large multinational consortium. The intergenic variant rs7294919 was associated with hippocampal volume (12q24.22; N = 21,151; P = 6.70 × 10 -16) and the expression levels of the positional candidate gene TESC in brain tissue. Additionally, rs10784502, located within HMGA2, was associated with intracranial volume (12q14.3; N = 15,782; P = 1.12 × 10 -12). We also identified a suggestive association with total brain volume at rs10494373 within DDR2 (1q23.3; N = 6,500; P = 5.81 × 10 -7).

The ENIGMA Consortium: Large-scale collaborative analyses of neuroimaging and genetic data

The Enhancing NeuroImaging Genetics through Meta-Analysis (ENIGMA) Consortium is a collaborative network of researchers working together on a range of large-scale studies that integrate data from 70 institutions worldwide. Organized into Working Groups that tackle questions in neuroscience, genetics, and medicine, ENIGMA studies have analyzed neuroimaging data from over 12,826 subjects. In addition, data from 12,171 individuals were provided by the CHARGE consortium for replication of findings, in a total of 24,997 subjects. By meta-analyzing results from many sites, ENIGMA has detected factors that affect the brain that no individual site could detect on its own, and that require larger numbers of subjects than any individual neuroimaging study has currently collected. ENIGMA's first project was a genome-wide association study identifying common variants in the genome associated with hippocampal volume or intracranial volume. Continuing work is exploring genetic associations with subcortical volumes (ENIGMA2) and white matter microstructure (ENIGMA-DTI). Working groups also focus on understanding how schizophrenia, bipolar illness, major depression and attention deficit/hyperactivity disorder (ADHD) affect the brain. We review the current progress of the ENIGMA Consortium, along with challenges and unexpected discoveries made on the way.

The presence of executive deficits in patients with Obstructive Sleep Apnoea

Obstructive sleep apnoea (OSA) is a chronic condition in which the upper airways collapse repeatedly during sleep, completely or partially obstructing breathing. This obstruction leads to chronic intermittent hypoxia and severe sleep fragmentation, disrupting the restorative functions of sleep. Beebe and Gozal (2002)a developed a theory which hypothesises that disruption of the restorative functions of sleep lead to a chronic low level brain damage most evident in executive functions (EF). Neuropsychological testing of EF, volumetric MRI, magnetic resonance spectroscopy, event related potentials and CSF biomarkers all provide support for this theory. Little research has been done to explore the nature of the subjective complaint and it’s impact on the activities of daily living.

Energy productivity and decarbonization of the global economy: Factor five resource productivity

In the 21st Century much of the world will experience untold wealth and prosperity that could not even be conceived only some three centuries before. However as with most, if not all, of the human civilisations, increases in prosperity have accumulated significant environmental impacts that threaten to result in environmentally induced economic decline. A key part of the world’s response to this challenge is to rapidly decarbonise economies around the world, with options to achieve 60-80 per cent improvements (i.e. in the order of Factor 5) in energy and water productivity now available and proven in every sector. Drawing upon the 2009 publication “Factor 5”, in this paper we discuss how to realise such large-scale improvements, involving complexity beyond technical and process innovation. We begin by considering the concept of greenhouse gas stabilisation trajectories that include reducing current greenhouse gas emissions to achieve a ‘peaking’ of global emissions, and subsequent ‘tailing’ of emissions to the desired endpoint in ‘decarbonising’ the economy. Temporal priorities given to peaking and tailing have significant implications for the mix of decarbonising solutions and the need for government and market assistance in causing them to be implemented, requiring careful consideration upfront. Within this context we refer to a number of examples of Factor 5 style opportunities for energy productivity and decarbonisation, and then discuss the need for critical economic contributions to take such success from examples to central mechanisms in decarbonizing the global economy.

The equity and efficiency of the Australian share market with respect to director trading

Purpose – The purpose of this paper is to investigate the extent of directors breaching the reporting requirements of the Australian Stock Exchange (ASX) and the Corporations Act in Australia. Further, it seeks to assess whether directors in Australia achieve abnormal returns from trades in their own companies. Design/methodology/approach – Using an event study approach on an Australian sample, abnormal returns for a range of situations were estimated. Findings – A total of 13 (seven) per cent of own‐company directors trades do not meet the ASX (Corporations Act) requirement of reporting within five (14) business days. Directors do achieve abnormal returns through trading in shares of their own companies. Ignoring transaction costs, outsiders can achieve abnormal returns by imitating directors' trades. Analysis of returns to directors after they trade but before they announce the trade to the market shows that directors are making small but statistically significant returns that are not available to the market. Analysis of returns to directors subsequent to the ASX reporting requirement up to the day the trade is reported shows that directors are making small but statistically significant returns that should be available to the market. Research limitations/implications – Future research should investigate the linkages between late reporting by directors and disadvantages to outside shareholders and the implementation of internal policies implemented to mitigate insider trading. Practical implications – Market participants should remain vigilant regarding the potential for late/non‐reporting of directors' trades. Originality/value – Uncovering breaches of reporting regulations are particularly important given that directors tend to purchase (sell) shares when the price is low (high), thereby achieving abnormal returns.

Inter-organisational characteristics of resilience in a post-disaster recovery context

During post-disaster recovery, an infrastructure system may be subject to a number of disturbances originating from several other interdependent infrastructures. These disturbances might result in a series of system failures, thereby having immediate impact on societal living conditions. The inability to detect signs of disturbance from one infrastructure during recovery might cause significant disruptive effects on other infrastructure via the interconnection that exist among them. In such circumstances, it clearly appears that critical infrastructures' interdependencies affect the recovery of each individual infrastructure, as well as those of other interdependent infrastructure systems. This is why infrastructure resilience needs to be improved in function of those interdependencies, particularly during the recovery period to avoid the occurrence of a ‘disaster of disaster’ scenario. Viewed from this perspective, resilience is achieved through an inter-organisational collaboration between the different organisations involved in the reconstruction of interdependent infrastructure systems. This paper suggests that to some extent, the existing degree of interconnectedness between these infrastructure systems can also be found in their resilience ability during post-disaster recovery. For instance, without a resilient energy system, a large-scale power outage could affect simultaneously all the interdependent infrastructures after a disaster. Thus, breaking down the silos of resilience would be the first step in minimizing the risks of disaster failures from one infrastructure to cascade or escalate to other interconnected systems.

Australian Consumer Law Commentary and Materials [5th Ed.]

"The Australian Consumer Law came into operation on 1 January 2011 as a single national law. It replaced 17 different pieces of Commonwealth, State and Territory legislation relating to consumer protection. Its introduction meant that for the first time, consumers throughout Australia had the same rights and remedies and correspondingly, businesses had the same obligations and responsibilities towards consumers without the barrier of confusing and expensive local variations in the law. Australian Consumer Law: Commentary and Materials contains up-to-date material on the Australian Consumer Law, and in particular the fifth edition incorporates: a revised treatment of unconscionability, taking account of the changes to Part 2-2 of the ACL that became effective in 2012; other State and Federal provisions relating to unfair terms and cases such as Kakavas v Crown Melbourne, ACCC v Lux Distributors, Director of Consumer Affairs v Scully and PT Ltd v Spuds Surf; a comprehensive treatment of the impact of Google v ACCC, Forrest v ASIC and ACCC v TPG – the trilogy of decisions that provide the most recent insights into the High Court’s thinking on aspects of the prohibitions of misleading conduct in the ACL and the Corporations Act 2001; numerous decisions of note; and the possible impact of the Harper Review."--publisher website

Financial Accounting: Reporting, Analysis and Decision Making [5th ed.]

In recent years accounting education has seen numerous changes to the way financial accounting is taught. These changes reflect the demands of an ever-changing business world, opportunities created by new technology and instructional technologies, and an increased understanding of how students learn. The foundation of Financial Accounting is based on a number of unique principles and innovations in accounting education. The objective of Financial Accounting is to provide students with an understanding of those concepts that are fundamental to the preparation and use of accounting information. Most students will forget procedural details within a short period of time. On the other hand, concepts, if well taught, should be remembered for a lifetime. Concepts are especially important in a world where the details are constantly changing. Students learn best when they are actively engaged. The overriding pedagogical objective of Financial Accounting is to provide students with continual opportunities for active learning. One of the best tools for active learning is strategically placed questions. Discussions are framed by questions, often beginning with rhetorical questions and ending with review questions, and our analytical devices, called decision-making toolkits, use key questions to demonstrate the purpose of each.

Economic value of recreational fishing in Moreton Bay and the potential impact of the marine park rezoning

In 2009, the area of the Moreton Bay Marine Park was increased from 0.5 per cent of the Bay area to 16 per cent. During the planning process, opposition by commercial and recreational fishers alike was raised, arguing that loss of fishing grounds would lead to substantial loss in economic benefits. The commercial sector was compensated through a buyback of fishing effort, but the recreational sector received no compensation. In this paper, we develop a travel cost model to estimate the potential economic impact on the recreational sector from the marine park rezoning. The results suggest that, counter to initial claims, non-market recreational fishing benefits may have increased by between $1.3m and $2.5m a year, with a current total annual value of around $20m. Keywords: Travel cost model; Economic valuation; Moreton Bay Marine Park; Recreational fishing

Estimates on the coverage of parameter space using populations of models

In this paper we provide estimates for the coverage of parameter space when using Latin Hypercube Sampling, which forms the basis of building so-called populations of models. The estimates are obtained using combinatorial counting arguments to determine how many trials, k, are needed in order to obtain specified parameter space coverage for a given value of the discretisation size n. In the case of two dimensions, we show that if the ratio (Ø) of trials to discretisation size is greater than 1, then as n becomes moderately large the fractional coverage behaves as 1-exp-ø. We compare these estimates with simulation results obtained from an implementation of Latin Hypercube Sampling using MATLAB.