Beyond social justice agendas: Indigenous knowledges in pre-service teacher education and practice in Australia

The space and positioning of Indigenous knowledges (IK) within Australian curricula and pedagogy are often contentious, informed by the broader Australian socio-cultural, political and economic landscape. Against changing educational policy, historically based on the myth of terra nullius, we discuss the shifting priorities for embedding Indigenous knowledges in educational practice in university and school curricula and pedagogy. In this chapter, we argue that personal and professional commitment to social justice is an important starting point for embedding Indigenous knowledges in the Australian school curricula and pedagogy. Developing teacher knowledge around embedding IK is required to enable teachers’ preparedness to navigate a contested historical/colonising space in curriculum decision-making, teaching and learning. We draw one mpirical data from a recent research project on supporting pre-service teachers as future curriculum leaders; the project was funded by the Office of Learning and Teaching (OLT). This project aimed to support future curriculum leaders to develop their knowledge of embedding IK at one Australian university. We propose supporting the embedding of IK in situ with pre-service teachers and their supervising teachers on practicum in real, sustained and affirming ways that shifts the recognition of IK from personal commitment to social justice in education, to one that values Indigenous knowledges as content to educate (Connell, 1993). We argue that sustained engagement with and appreciation of IKhas the potential to decolonise Australian curricula, shift policy directions and enhance race relations between Indigenous and non-Indigenous Australians .

The role of emotion in product, service and business model design

Designers have become aware of the importance of creating strong emotional experiences intertwined with new tangible products for the past decade, however an increased interest from firms has emerged in developing new service and business models as complimentary forms of emotion-driven innovation. This interdisciplinary study draws from the psychological sciences – theory of emotion – and the management sciences – business model literature to introduce this new innovation agenda. The term visceral hedonic rhetoric (VHR) is defined as the properties of a product, (and in this paper service and business model extensions) that persuasively induce the pursuit of pleasure at an instinctual level of cognition. This research paper lays the foundation for VHR beyond a product setting, presenting the results from an empirical study where organizations explored the possibilities for VHR in the context of their business. The results found that firms currently believe VHR is perceived in either their product and/or services they provide. Implications suggest shifting perspective surrounding the use of VHR across a firm’s business model design in order to influence the outcomes of their product and/or service design, resulting in an overall stronger emotional connection with the customer.

Proteogenomics of selective susceptibility to endotoxin using circulating acute phase biomarkers and bioassay development in sheep: a review

Scientists have injected endotoxin into animals to investigate and understand various pathologies and novel therapies for several decades. Recent observations have shown that there is selective susceptibility to Escherichia coli lipopolysaccharide (LPS) endotoxin in sheep, despite having similar breed characteristics. The reason behind this difference is unknown, and has prompted studies aiming to explain the variation by proteogenomic characterisation of circulating acute phase biomarkers. It is hypothesised that genetic trait, biochemical, immunological and inflammation marker patterns contribute in defining and predicting mammalian response to LPS. This review discusses the effects of endotoxin and host responses, genetic basis of innate defences, activation of the acute phase response (APR) following experimental LPS challenge, and the current approaches employed in detecting novel biomarkers including acute phase proteins (APP) and micro-ribonucleic acids (miRNAs) in serum or plasma. miRNAs are novel targets for elucidating molecular mechanisms of disease because of their differential expression during pathological, and in healthy states. Changes in miRNA profiles during a disease challenge may be reflected in plasma. Studies show that gel-based two-dimensional electrophoresis (2-DE) coupled with either matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF MS) or liquid chromatography-mass spectrometry (LC-MS/MS) are currently the most used methods for proteome characterisation. Further evidence suggests that proteomic investigations are preferentially shifting from 2-DE to non-gel based LC-MS/MS coupled with data extraction by sequential window acquisition of all theoretical fragment-ion spectra (SWATH) approaches that are able to identify a wider range of proteins. Enzyme-linked immunosorbent assay (ELISA), quantitative real-time polymerase chain reaction (qRT-PCR), and most recently proteomic methods have been used to quantify low abundance proteins such as cytokines. qRT-PCR and next generation sequencing (NGS) are used for the characterisation of miRNA. Proteogenomic approaches for detecting APP and novel miRNA profiling are essential in understanding the selective resistance to endotoxin in sheep. The results of these methods could help in understanding similar pathology in humans. It might also be helpful in the development of physiological and diagnostic screening assays for determining experimental inclusion and endpoints, and in clinical trials in future

Disorganizing educational tropes: Conceptions of dis/ability and curriculum

A study examined the politics of dis/ability and curriculum. Data were obtained from a review of the new disability studies literature, focusing on the areas of history, sociology, anthropology, and critical legal theory. The results indicate that this new literature challenges popular psychoeducational models that assume disability as an objective medical, individual, and pathological deficiency, effectively restricting the systematic study of dis/ability as relational, external, shifting, and socially constituted. The findings suggest ways in which perceptions of “school problems” have to be adjusted to understand how the constant refiguration of normativities in everyday activities creates perceptions of disability-negative ontologies, generates experiences that incite efforts to modify those perceptions in multiple ways, and produces unintended effects from well-intended approaches that in the end remain irreducible to simplistic definitions for the one “ethical” or “politically correct” strategy.

Climbing the design ladder: Step by step

This research presents findings of a research project where the first author worked with a small to medium sized enterprise (SME) manufacturing company in order to integrate design at a strategic level within the company. This study aims to identify the changes experienced in the participating company while shifting the perspective of design from a product focus towards a strategic focus. Staff interviews at two points in time and a reflective journal were used as data sources within an action research methodology. A shift in the perspective of design was noted in three cultural changes within the firm over time: a focus on long term as well as short term outcomes, on indirect as well as direct value and on intangible as well as tangible benefits. These three components are proposed as ‘cultural stepping stones’ that describe how a company transitions from an exclusively product- focused utilisation of design, to a process-level application of design. Implications of this research are provided as considerations for businesses that are attempting to facilitate a similar transformation in the future.

The dynamics of individual teacher autonomy: A case study of teachers' work in a Queensland secondary school

The emphasis on collegiality and collaboration in the literature on teachers' work and school reform has tended to underplay the significance of teacher autonomy. This thesis explores the dynamics of teachers' understandings and experiences of individual teacher autonomy (as contrasted with collective autonomy) in an independent school in Queensland which promoted itself as a 'teachers' school' with a strong commitment to individual teacher autonomy. The research was a case study which drew on methodological signposts from critical, feminist and traditional ethnography. Intensive fieldwork in the school over five months incorporated the ethnographic techniques of observation, interviews and document analysis. Teachers at Thornton College understood their experience of individual autonomy at three interrelated levels--in terms of their work in the classroom, their working life in the school, and their voice in the decision-making processes of the school. They felt that they experienced a great deal of individual autonomy at each of these three levels. These understandings and experiences of autonomy were encumbered or enabled by a range of internal and external stakeholder groups. There were also a number of structural influences (community perceptions, market forces, school size, time and bureaucracy) emerging from the economic, social and political structures in Australian society which influenced the experience of autonomy by teachers. The experience of individual teacher autonomy was constantly shifting, but there were some emergent patterns. Consensus on educational goals and vision, and strong expressions of trust and respect between teachers and stakeholders in the school, characterised the contexts in which teachers felt they experienced high levels of autonomy in their work. The demand for accountability and desire for relatedness motivated stakeholders and structural forces to influence teacher autonomy. Some significant gaps emerged between the rhetoric of a commitment to individual teacher autonomy and decision-making practices in the school, that gave ultimate power to the co-principals. Despite the rhetoric and promotion of non-hierarchical structures and collaborative decision-making processes, many teachers perceived that their experience of individual autonomy remained subject to the exercise of 'partial democracy' by school leaders.

Integrated Information and Communication Technology Strategies for Competitive Higher Education in Asia and the Pacific

Developing countries in Asia and the Pacific are rapidly reaching middle income economic status. Their competitive advantage is shifting from labor-intensive industries and natural resource-based economies to knowledge-based economies that innovate and create new products and services. Early adoption of information and communication technology (ICT) can allow countries to leapfrog over the traditional development pathway into production of knowledge-based products and services. Since higher education institutions (HEIs) are considered a primary engine of economic growth, adoption of ICT is imperative for securing competitive advantage. ICT is thought to be one of the fastest growing industries and is frequently heralded as a transforming influence on higher education systems globally and, consequently, is enhancing the competitive advantage of countries. It is increasingly becoming evident that an institution-wide ICT strategy covering all evolving functions of competitive HEIs is necessary. Such a system may be designed as an integrated platform but implemented in phases.

Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

Contemporising the Past: Envisaging the Future Refereed - Proceedings of the 2014 World Dance Alliance Global Summit

With a strong emphasis on the interconnection between theory and practice, and how past/present intersections inform the future, these thirty-one articles by artist/scholars and artist/teachers profile current dance research from thirteen countries. The papers coalesce around five sub-themes: o approaches to choreography and performance o shifting cultural dance identities o contemporary research perspectives o changing dance pedagogies o site & environmental dance In exploring the cognitive and the sensory, the rational and the instinctive, the explicit and the implicit, these writings create and celebrate common and differentiated dance understandings — at times directly and provocatively, and at times liminally and poetically.

Cultural safety and diversity: Refocusing our energies in mental health nursing practice, education and research

INTRODUCTION AND BACKGROUND: This presentation draws on a body of work assessing cultural safety's potential to generate change in mental health nursing research (Cox and Simpson 2015), in education and in clinical practice (Cox and Taua 2013, 2016; Happell, Cowin, Roper, Lakeman & Cox 2013). It presents evidence to suggest that cultural safety could resolve the conceptual confusion surrounding culture and diversity in nursing curricular, in clinical and in research practice. The history and nature of mental health work recommend cultural safety to focus attention on diversity, power imbalance, racism, cultural dominance, and structural inequality, identified as barriers and tensions in clinical practice and in service user participation. Cultural safety gives mental health nursing a well theorized and articulated model, which is evolving to improve practice into the future. DESCRIPTION: This work involved an immersion in the literature on cultural safety and the Service User Research movement. It draws on 5 months' work with a service users' research group in the UK and reflections on 9 years of cultural safety teaching. POLICY/PRACTICE CHANGE: This work provokes a crucial change of emphasis from locating the source of issues in the diversity of people to locating it in how society responds to diversity: a change from individualistic to systemic concerns. IMPLICATIONS FOR MENTAL HEALTH NURSING: Cultural safety in clinical practice, education, and research is specifically concerned with awareness of the impact of systemic workplace cultures and with staff cultural self-awareness to bring about cultural change and person-centred care of individuals' unique needs and aspirations within their life context.

Editorial of "International Journal of Critical Indigenous Studies Volume 5, Number 1, 2012"

The first two articles of this edition of the journal testify to the lengthening reach of the discipline of Critical Indigenous Studies that is, remarkably, still in its nascence. Emiel Martens examines the development of Maori filmmaking since the 1980s and takes the opportunity to explore this Indigenous cinema in the context of developments in the New Zealand film industry generally. Shifting from cultural production to renewable energy, Steven M. Hoffman and Thibault Martin remind us that in the effort to satiate the demands for energy, it is often Indigenous peoples who bear adverse consequences. Using a social capital framework, the authors examine the impact of the development of hydroelectric power upon a displaced Aboriginal community and conclude that displacement has resulted in an erosion of cohesive social bonds that once ensured a sustainable way of life.

Liberty

In terms of critical discourse, Liberty contributes to the ongoing aesthetic debate on ‘the sublime.’ Philosopher Immanuel Kant (1724–1804) defined the sublime as a failure of rationality in response to sensory overload: a state where the imagination is suspended, without definitive reference points—a state beyond unequivocal ‘knowing.’ I believe the events of September 11, 2001 eluded our understanding in much the same way, leaving us in a moment of suspension between awe and horror. It was an event that couldn’t be understood in terms of scope or scale. It was a moment of overload, which is so difficult to capture in art. With my work I attempt to rekindle that moment of suspension. Like the events of 9/11, Liberty defies definition. Its form is constantly changing; it is always presenting us with new layers of meaning. Nobody quite had a handle on the events that followed 9/11, because the implications were constantly shifting. In the same way, Liberty cannot be contained or defined at any moment in time. Like the events of 9/11, the full story cannot be told in a snapshot. One of the dictionary definitions for the word ‘sublime’ is the conversion of ‘a solid substance directly into a gas, without there being an intermediate liquid phase’. With this in mind, I would like to present Liberty as a work that is literally ‘sublime.’ But what’s really interesting to me about Liberty is that it presents the sublime on all levels: in its medium, in its subject matter (that moment of suspension), and in its formal (formless) presentation. On every level Liberty is sublime—subverting all tangible reference points and eluding capture entirely. Liberty is based on the Statue of Liberty in New York. However, unlike that statue which has stood in New York since 1886 and can be reasonably expected to stand for millennia, this work takes on diminishing proportions, carved as it is in carbon dioxide, a mysterious, previously unexplored medium—one which smokes, snows and dramatically vanishes into a harmless gas. Like the material this work is carved from, the civil liberties of the free world are diminishing fast, since 9/11 and before. This was my thought when I first conceived this work. Now it’s become evident that Liberty expresses a lot more than just this: it demonstrates the erosion of civil liberties, yes. However, it also presents the intangible, indefinable moments in the days and months that followed 9/11. The sculptural work will last for only a short time, and thereafter will exist only in documentation. During this time, the form is continually changing and self-refining, until it disappears entirely, to be inhaled, metabolised and literally taken to heart by viewers.

An operational-level multi-stage mine production timetabling model for optimally synchronising drilling, blasting and excavating operations

This paper proposes a new multi-stage mine production timetabling (MMPT) model to optimise open-pit mine production operations including drilling, blasting and excavating under real-time mining constraints. The MMPT problem is formulated as a mixed integer programming model and can be optimally solved for small-size MMPT instances by IBM ILOG-CPLEX. Due to NP-hardness, an improved shifting-bottleneck-procedure algorithm based on the extended disjunctive graph is developed to solve large-size MMPT instances in an effective and efficient way. Extensive computational experiments are presented to validate the proposed algorithm that is able to efficiently obtain the near-optimal operational timetable of mining equipment units. The advantages are indicated by sensitivity analysis under various real-life scenarios. The proposed MMPT methodology is promising to be implemented as a tool for mining industry because it is straightforwardly modelled as a standard scheduling model, efficiently solved by the heuristic algorithm, and flexibly expanded by adopting additional industrial constraints.

An object-centred approach to encourage online participation in the context of behaviour change

Online groups rely on contributions from their members to flourish, but in the context of behaviour change individuals are typically reluctant to participate actively before they have changed successfully. We took inspiration from CSCW research on objects to address this problem by shifting the focus of online participation from the exchange of personal experiences to more incidental interactions mediated by objects that offer support for change. In this article we describe how we designed, deployed and studied a smartphone application that uses different objects, called distractions and tips, to facilitate social interaction amongst people trying to quit smoking. A field study with 18 smokers revealed different forms of interaction: purely instrumental interactions with the objects, subtle engagement with other users through receptive and covert interactions, as well as explicit interaction with other users through disclosure and mutual support. The distraction objects offered a stepping-stone into interaction, whereas the tips encouraged interaction with the people behind the objects. This understanding of interaction through objects complements existing frameworks of online participation and adds to the current discourse on object-centred sociality. Furthermore, it provides an alternative approach to the design of online support groups, which offers the users enhanced control about the information they share with other users. We conclude by discussing how researchers and practitioners can apply the ideas of interaction around objects to other domains where individuals may have a simultaneous desire and reluctance to interact.

'SABAM v scarlet: Evidence of an emerging backlash against corporate copyright lobbies in Europe?

The symbols, signs, and traces of copyright and related intellectual property laws that appear on everyday texts, objects, and artifacts have multiplied exponentially over the past 15 years. Digital spaces have revolutionized access to content and transformed the ways in which content is porous and malleable. In this volume, contributors focus on copyright as it relates to culture. The editors argue that what «counts» as property must be understood as shifting terrain deeply influenced by historical, economic, cultural, religious, and digital perspectives. Key themes addressed include issues of how: • Culture is framed, defined, and/or identified in conversations about intellectual property; • The humanities and other related disciplines are implicated in intellectual property issues; • The humanities will continue to rub up against copyright (e.g., issues of authorship, authorial agency, ownership of texts); • Different cultures and bodies of literature approach intellectual property, and how competing dynasties and marginalized voices exist beyond the dominant U.S. copyright paradigm. Offering a transnational and interdisciplinary perspective, Cultures of Copyright offers readers – scholars, researchers, practitioners, theorists, and others – key considerations to contemplate in terms of how we understand copyright’s past and how we chart its futures.