Fouling of waste heat recovery : numerical and experimental results

Numerical results are presented to investigate the performance of a partly-filled porous heat exchanger for waste heat recovery units. A parametric study was conducted to investigate the effects of inlet velocity and porous block height on the pressure drop of the heat exchanger. The focus of this work is on modelling the interface of a porous and non-porous region. As such, numerical simulation of the problem is conducted along with hot-wire measurements to better understand the physics of the problem. Results from the two sources are then compared to existing theoretical predictions available in the literature which are unable to predict the existence of two separation regions before and after the porous block. More interestingly, a non-uniform interface velocity was observed along the streamwise direction based on both numerical and experimental data.

Dynamics of industry architecture and firm’s capability development : role of knowledge integration within product innovation

Aligned with the decline of Marshalian view of industry as constituting homogeneous set of firms, the new perspective is emerging by concentrating more on dynamics of sectors as the building block of industrial changes. Based on new assumptions, much of the action in terms of strategy, technology, and knowledge development does not happen either among firms within a stable industry, or through the growth or decline of certain sectors compared to others. Instead, the action happens in terms of the definition, redefinition, drawing, and redrawing of the very nature of these sectors. Technology does not progress and develop within a sector; rather it shapes (and is shaped by) the encompassing architecture of multiple sectors.

Rapid production of a plasmid DNA encoding a malaria vaccine candidate via amino-functionalized poly(GMA-co-EDMA) monolith

Malaria is a global health problem; an effective vaccine is urgently needed. Due to the relative poverty and lack of infrastructure in malaria endemic areas, DNA-based vaccines that are stable at ambient temperatures and easy to formulate have great potential. While attention has been focused mainly on antigen selection, vector design and efficacy assessment, the development of a rapid and commercially viable process to manufacture DNA is generally overlooked. We report here a continuous purification technique employing an optimized stationary adsorbent to allow high-vaccine recovery, low-processing time, and, hence, high-productivity. A 40.0 mL monolithic stationary phase was synthesized and functionalized with amino groups from 2-Chloro-N,N- diethylethylamine hydrochloride for anion-exchange isolation of a plasmid DNA (pDNA) that encodes a malaria vaccine candidate, VR1020-PyMSP4/5. Physical characterization of the monolithic polymer showed a macroporous material with a modal pore diameter of 750 nm. The final vaccine product isolated after 3 min elution was homogeneous supercoiled plasmid with gDNA, RNA and protein levels in keeping with clinical regulatory standards. Toxicological studies of the pVR1020-PyMSP4/5 showed a minimum endotoxin level of 0.28 EU/m.g pDNA. This cost-effective technique is cGMP compatible and highly scalable for the production of DNA-based vaccines in commercial quantities, when such vaccines prove to be effective against malaria. © 2008 American Institute of Chemical Engineers.

The suitability of DEAE-Cl active groups on customized poly(GMA-co-EDMA) continuous stationary phase for fast enzyme-free isolation of plasmid DNA

The creation of a commercially viable and a large-scale purification process for plasmid DNA (pDNA) production requires a whole-systems continuous or semi-continuous purification strategy employing optimised stationary adsorption phase(s) without the use of expensive and toxic chemicals, avian/bovine-derived enzymes and several built-in unit processes, thus affecting overall plasmid recovery, processing time and economics. Continuous stationary phases are known to offer fast separation due to their large pore diameter making large molecule pDNA easily accessible with limited mass transfer resistance even at high flow rates. A monolithic stationary sorbent was synthesised via free radical liquid porogenic polymerisation of ethylene glycol dimethacrylate (EDMA) and glycidyl methacrylate (GMA) with surface and pore characteristics tailored specifically for plasmid binding, retention and elution. The polymer was functionalised with an amine active group for anion-exchange purification of pDNA from cleared lysate obtained from E. coli DH5α-pUC19 pellets in RNase/protease-free process. Characterization of the resin showed a unique porous material with 70% of the pores sizes above 300 nm. The final product isolated from anion-exchange purification in only 5 min was pure and homogenous supercoiled pDNA with no gDNA, RNA and protein contamination as confirmed with DNA electrophoresis, restriction analysis and SDS page. The resin showed a maximum binding capacity of 15.2 mg/mL and this capacity persisted after several applications of the resin. This technique is cGMP compatible and commercially viable for rapid isolation of pDNA.

Sport development programmes for Indigenous Australians : innovation, inclusion and development, or a product of ‘white guilt’?

Under the legacy of neoliberalism, it is important to consider how the indigenous people, in this case of Australia, are to advance, develop and achieve some approximation of parity with broader societies in terms of health, educational outcomes and economic participation. In this paper, we explore the relationships between welfare dependency, individualism, responsibility, rights, liberty and the role of the state in the provision of Government-funded programmes of sport to Indigenous communities. We consider whether such programmes are a product of ‘white guilt’ and therefore encourage dependency and weaken the capacity for independence within communities and individuals, or whether programmes to increase rates of participation in sport are better viewed as good investments to bring about changes in physical activity as (albeit a small) part of a broader social policy aimed at reducing the gaps between Indigenous and non-Indigenous Australians in health, education and employment.

A comparison between conductive and infrared devices for measuring mean skin temperature at rest, during exercise in the heat, and recovery

Purpose: Skin temperature assessment has historically been undertaken with conductive devices affixed to the skin. With the development of technology, infrared devices are increasingly utilised in the measurement of skin temperature. Therefore, our purpose was to evaluate the agreement between four skin temperature devices at rest, during exercise in the heat, and recovery. Methods: Mean skin temperature (T̅sk) was assessed in thirty healthy males during 30 min rest (24.0± 1.2°C, 56 ± 8%), 30 min cycle in the heat (38.0 ± 0.5°C, 41 ± 2%), and 45 min recovery(24.0 ± 1.3°C, 56 ± 9%). T̅sk was assessed at four sites using two conductive devices(thermistors, iButtons) and two infrared devices (infrared thermometer, infrared camera). Results: Bland–Altman plots demonstrated mean bias ± limits of agreement between the thermistors and iButtons as follows (rest, exercise, recovery): -0.01 ± 0.04, 0.26 ± 0.85, -0.37 ± 0.98°C; thermistors and infrared thermometer: 0.34 ± 0.44, -0.44 ± 1.23, -1.04 ± 1.75°C; thermistors and infrared camera (rest, recovery): 0.83 ± 0.77, 1.88 ± 1.87°C. Pairwise comparisons of T̅sk found significant differences (p < 0.05) between thermistors and both infrared devices during resting conditions, and significant differences between the thermistors and all other devices tested during exercise in the heat and recovery. Conclusions: These results indicate poor agreement between conductive and infrared devices at rest, during exercise in the heat, and subsequent recovery. Infrared devices may not be suitable for monitoring T̅sk in the presence of, or following, metabolic and environmental induced heat stress.

Hydrotherapy as a recovery strategy after exercise: A pragmatic controlled trial

Background Our aim was to evaluate the recovery effects of hydrotherapy after aerobic exercise in cardiovascular, performance and perceived fatigue. Methods A pragmatic controlled repeated measures; single-blind trial was conducted. Thirty-four recreational sportspeople visited a Sport-Centre and were assigned to a Hydrotherapy group (experimental) or rest in a bed (control) after completing a spinning session. Main outcomes measures including blood pressure, heart rate, handgrip strength, vertical jump, self-perceived fatigue, and body temperature were assessed at baseline, immediately post-exercise and post-recovery. The hypothesis of interest was the session*time interaction. Results The analysis revealed significant session*time interactions for diastolic blood pressure (P=0.031), heart rate (P=0.041), self perceived fatigue (P=0.046), and body temperature (P=0.001); but not for vertical jump (P=0.437), handgrip (P=0.845) or systolic blood pressure (P=0.266). Post-hoc analysis revealed that hydrotherapy resulted in recovered heart rate and diastolic blood pressure similar to baseline values after the spinning session. Further, hydrotherapy resulted in decreased self-perceived fatigue after the spinning session. Conclusions Our results support that hydrotherapy is an adequate strategy to facilitate cardiovascular recovers and perceived fatigue, but not strength, after spinning exercise. Trial registration ClinicalTrials.gov Identifier: NCT01765387 Keywords: Hydrotherapy; Heart rate; Fatigue; Strength; Blood pressure; Body temperature

Practical implementation of species' recovery plans - Lessons from the White-backed Woodpecker Action Plan in Sweden

Successful biodiversity conservation requires safeguarding viable populations of species. To work with this challenge Sweden has introduced a concept of Action Plans, which focus on the recovery of one or more species; while keeping in mind the philosophy of addressing ecosystems in a more comprehensive way, following the umbrella concept. In this paper we investigate the implementationprocess of the ActionPlanfor one umbrella species, the White-backed Woodpecker (WBW) Dendrocopos leucotos. We describe the plan's organisation and goals, and investigate its implementation and accomplishment of particular targets, based on interviewing and surveying the key actors. The achievement of the targets in 2005-2008 was on average much lower than planned, explained partially by the lack of knowledge/data, experienced workers, and administrative flexibility. Surprisingly, the perceived importance of particular conservation measures, the investment priority accorded to them, the money available and various practical obstacles all failed to kg? explain the target levels achieved. However qualitative data from both the interviews and the survey highlight possible implementation obstacles: competing interests with other conservation actions and the level of engagement of particular implementing actors. Therefore we suggest that for successful implementation of recovery plans, there is aneed for initial and inclusive scoping prior to embarking on the plan, where not only issues like ecological knowledge and practical resources are considered, but also possible conflicts and synergies with other conservation actions. An adaptive approach with regular review of the conservation process is essential, particularly in the case of such complex action plans as the one for the WBW.

The performance advantages for SMEs of product innovation and marketing resource–capability complementarity in emerging economies

This study argues that small and medium-sized enterprises (SMEs) must possess both resources and capabilities at a superior level, and those resources and capabilities must be complementary with one another to achieve superior financial performance. The resources and capabilities of interest are product innovation and marketing. Using data from manufacturing SMEs, the results suggest that product innovation resource–capability complementarity, marketing resource–capability complementarity, and their interaction are positively related to financial performance through product innovation and customer performance. The findings suggest that some SMEs may outperform others not only because they possess a specific individual resource–capability complementarity but also because they create synergy and asset interconnectedness.

Developing and evaluating approaches for utilising injury data to support product safety initiatives

With increasing concern about consumer product-related injuries in Australia, product safety regulators need evidence-based research to understand risks and patterns to inform their decision making. This study analysed paediatric injury data to identify and quantify product-related injuries in children to inform product safety prioritisation. This study provides information on novel techniques for interrogating health data to identify trends and patterns in product-related injuries to inform strategic directions in this growing area of concern.

Examining the new product innovation – performance relationship: Optimizing the role of individual-level creativity and attention-to-detail

New product innovation has been identified as the key to firms' marketplace success, profit and survival. Yet, the failure rate for new products is high. Because of the high costs associated with new product development, there is considerable theoretical and managerial interest in how to minimize the high failure rates of new products and what separates new product winners from losers. This study focuses on individual level ambidexterity – namely head of the R&D departments' capacity to engage in creativity and attention-to-detail simultaneously, a skill involving different centers of attention, and relying on somewhat incompatible behaviors and processes. The ability to engage in these behaviors simultaneously is seen as being ambidextrous. Drawing from the data of 150 advanced manufacturing firms in India (gathered from one CEO and one head of the R&D department for each firm), the results show that when an individual head of R&D engages heavily only in creativity, too many new, risky ideas may come and when he/she engages heavily only in attention-to-detail, he/she may suffer through a lack of novel ideas. Both approaches limit individual's contribution to enhancing product innovation – financial performance relationship. The results also show that an individual head of R&D needs to engage in high levels creativity and attention-to-detail in the pursuit of enhancing product innovation to achieve superior financial performance.

Product stability and sequestration mechanisms in Solanum tuberosum engineered to biosynthesize high value ketocarotenoids

To produce commercially valuable ketocarotenoids in Solanum tuberosum, the 4, 4′ β-oxygenase (crtW) and 3, 3′ β-hydroxylase (crtZ) genes from Brevundimonas spp. have been expressed in the plant host under constitutive transcriptional control. The CRTW and CRTZ enzymes are capable of modifying endogenous plant carotenoids to form a range of hydroxylated and ketolated derivatives. The host (cv. Désirée) produced significant levels of nonendogenous carotenoid products in all tissues, but at the apparent expense of the economically critical metabolite, starch. Carotenoid levels increased in both wild-type and transgenic tubers following cold storage; however, stability during heat processing varied between compounds. Subcellular fractionation of leaf tissues revealed the presence of ketocarotenoids in thylakoid membranes, but not predominantly in the photosynthetic complexes. A dramatic increase in the carotenoid content of plastoglobuli was determined. These findings were corroborated by microscopic analysis of chloroplasts. In tuber tissues, esterified carotenoids, representing 13% of the total pigment found in wild-type extracts, were sequestered in plastoglobuli. In the transgenic tubers, this proportion increased to 45%, with esterified nonendogenous carotenoids in place of endogenous compounds. Conversely, nonesterified carotenoids in both wild-type and transgenic tuber tissues were associated with amyloplast membranes and starch granules.