Critical analysis of high particle number emissions from accelerating compressed natural gas buses

Compressed natural gas (CNG) engines are thought to be less harmful to the environment than conventional diesel engines, especially in terms of particle emissions. Although, this is true with respect to particulate matter (PM) emissions, results of particle number (PN) emission comparisons have been inconclusive. In this study, results of on-road and dynamometer studies of buses were used to derive several important conclusions. We show that, although PN emissions from CNG buses are significantly lower than from diesel buses at low engine power, they become comparable at high power. For diesel buses, PN emissions are not significantly different between acceleration and operation at steady maximum power. However, the corresponding PN emissions from CNG buses when accelerating are an order of magnitude greater than when operating at steady maximum power. During acceleration under heavy load, PN emissions from CNG buses are an order of magnitude higher than from diesel buses. The particles emitted from CNG buses are too small to contribute to PM10 emissions or contribute to a reduction of visibility, and may consist of semivolatile nanoparticles.

Strengthening of circular hollow steel tubular sections using high modulus CFRP sheets

This paper describes the behaviour of very high strength (VHS) circular steel tubes strengthened by carbon fibre reinforced polymer (CFRP) and subjected to axial tension. A series of tests were conducted with different bond lengths and number of layers. The distribution of strain through the thickness of CFRP layers and along CFRP bond length was studied. The strain was found to generally decrease along the CFRP bond length far from the joint. The strain through the thickness of the CFRP layers was also found to decrease from bottom to top layer. The effective bond length for high modulus CFRP was established. Finally empirical models were developed to estimate the maximum load for a given CFRP arrangement.

Accountability through high-stakes testing and curriculum change

The motivation for secondary school principals in Queensland, Australia, to investigate curriculum change coincided with the commencement in 2005 of the state government’s publication of school exit test results as a measure of accountability. Aligning the schools’ curriculum with the requirements of high-stakes testing is considered by many academics and teachers as negative outcome of accountability for reasons such as ‘teaching to the test’ and narrowing the curriculum. However, this article outlines empirical evidence that principals are instigating curriculum change to improve published high-stakes test results. Three principals in this study offered several reasons as to why they wished to implement changes to school curricula. One reason articulated by all three was the pressures of accountability, particularly through the publication of high-stakes test data which has now become commonplace in education systems of many Western Nations.

Use of lifts and refuge floors for fire evacuation in high rise apartment buildings

If current population and accommodation trends continue, Australian cities will, in the future, have noticeable numbers of apartment buildings over 60 storeys high. With an aging population it follows that a significant proportion of those occupying these buildings will be senior citizens, many of whom will have some form of disability. For these occupants a fire emergency in a high rise building presents a serious problem. Currently lifts cannot be used for evacuation and going down 60 storeys in a fire isolated staircase would be physically impossible for many. Therefore, for many, the temptation to remain in one’s unit will be very strong. With an awareness of this behaviour trend in older residents, many researchers have, in recent years, explored the possible wider use of lifts in a fire emergency. So far the use of lifts for evacuation has been approved for a small number of buildings but wide acceptance of this solution is still to be achieved. This paper concludes that even in high-rise apartment buildings where lifts are approved for evacuation, architects should design the building with alternative evacuation routes and provide suitable safe refuge areas for those who cannot use the stairs when the lifts are unavailable.

Reverse immigration

This book (256 pages, written in Korean) is a critical essay that reviews, questions, and criticises Korean and Eastern immigrants’ thinking and behaviour styles in Australia from their cultural perspectives, and discuss and proposes a creative cultural dimension for their better life in a multicultural context. Multiculturalism is not supportive of Eastern cultures because of individualistic collection of cultures, while transculturalism facilitates nurture of their culture in a community-oriented way within multicultural circumstances. Korean and Eastern immigrants, sharing oriental cultural systems and values, should approach to the Australian multicultural context with transculturalism which allows creating new cultural values in collaboration with and by participation into local communities. ------------------------------------------------------------ Many Eastern immigrants live in their own ethnic communities without or less interacting with Australian (communities). The author defines this phenomenon as “reverse immigration”. Reverse immigration refers to re-immigrating to their ethnic community in Australia or to their birth country despite they did not anticipate that this would happen to them before immigration to Australia. The author argues that Easterners’ collectivistic culture often devalues individuality and vice versa. Cultural clash between West and East often forces the immigrants to choose reverse immigration because of their lack of understanding of Western culture and their cultural characteristics such as low individuality, high power distance, and high uncertainty avoidance. For example, a vague boundary between individualist and collectivist in a collectivistic context (within their ethnic group) often leads to maladjustment to local communities and enhancement of cultural conservatism. The author proposes that the cultural clash can be overcome by cross-cultural activities named “transculturalism”. To Eastern immigrants, transculturalism can be achieved by acculturation of their two predominant cultures, the third-person perspective and generalised others. In a multicultural context, the former refers to the ability to share another person's feelings and emotions as if they were your own, and the latter does the ability to manage community and public expectations. When both cultural values are used for quality interactions between East and West, they allow Eastern immigrants to be more creative and critical and Australian to be more socially inclusive and culturally tolerant. With these discussions, the author discusses cultural differences throughout the book with four topics (chapters) and proposes transculturalism as a solution to the reverse immigration. ------------------------------------------------------------ Chapter 1 criticises Koreans’ attitudes and methods towards learning English that is less pragmatic and practical, but more likely to be a scholarly study. The author explains that Koreans’ non-pragmatic towards learning English has been firmly built based on their traditional systems and values that Koreans view English as a discipline and an aim of academic achievements rather than a means of communication. Within their cultural context, English can be perceived as more than a language, but something like vastly superior to their language and culture. Their collectivistic culture regards English as an unreachable and heterogeneous one that may threaten their cultural identity, so that “scholarly studying” is only the way to achieve (not learn) it. This discourages the immigrants to engage and involve in daily dialogues by “using” English as a second language. The author further advises the readers to be aware of Eastern collectivistic culture in communication and interaction that sometimes completely reverses private and public topics in a Western context. This leads them to feel that they have no content to talk to natives. ------------------------------------------------------------ Chapter 2 compares between Korea and Australia in terms of their educational systems and values, and proposes how Eastern overseas students can achieve critical and creative thinking within a Western educational setting. Interestingly, this chapter includes an explanation of why Eastern overseas students easily fail assessments including essay writing, oral presentations and discussions. One of the reasons the author explains is that Eastern students are not familiar to criticise others and think creatively, especially when they recognise that their words and ideas may harm the collectivistic harmony. Western educational systems focuses on enhancement of individuality such as self-confidence, self-esteem, and self-expression, while Eastern educational systems foster group-oriented values such as interpersonal relationship, and strong moral and spiritual values. Yet, the author argues that the collectivistic approach to criticism and creativity is often more critical and creative than Western individuals when they know what they are supposed to do for a group (or a community). Therefore, Eastern students need to think their cultural merits and demerits by using an individual perspective rather than generalised others’ perspective. The latter often discourages individual participation in a community, and the generalised others in a Western culture is weaker than Eastern. Furthermore, Western educational systems do not educate students to transform (loose) their individuality to fit into a group or a community. Rather they cultivate individuality for community prosperity. ------------------------------------------------------------ Chapter 3 introduces various cases of reverse immigration in workplaces that many immigrants return to their country or their ethnic community after many trials for acculturation. Reverse immigration is unexpected and not planned before immigration, so that its emotional embarrassment increases such severe social loneliness. Most Eastern immigrant workers have tried to adjust themselves in this new cultural environment at the early stages of immigration. However, their cultural features of collectivism, high power distance, high uncertainty avoidance, and long-term oriented cultures suppress individual initiative and eliminate the space for experiments in ways of acculturation. The author argues that returning to their ethnic community (physically and psychologically) leads to two significant problems: their distorted parenting and becoming more conservatives. The former leads the first generation of immigrants to pressure their children to pursue extrinsic or materialist values, such as financial success, fame and physical appearance, rather than on intrinsic values, while the latter refers to their isolated conservative characters because of their remoteness from the changes of their own country. The author also warns that their ethnic and religious groups actively strengthens immigrants’ social loneliness and systematically discourages immigrants’ interests and desire to be involving into local communities. The ethnic communities and leaders have not been interacting with Australian local communities and, as a result, are eager to conserve outdated cultural systems values. Even they have a tendency to weed out those people who wish to settle down within Australian local communities. They believe that those people can threaten their community’s survival and continuity. ------------------------------------------------------------ Chapter 4 titled multiculturalism argues that Korean and Eastern immigrants should more precisely understand Australia as a multicultural society in a way of collaboratively creating new cultural values. The author introduces multiculturalism with its definitions and history in Australia and argues the limitations of multiculturalism from an Easterner’s perspective. With well known tragedies of the second generations of U.S. immigrants, Cho Seung-Hui, a university student, massacred 32 people on the Virginia Tech before committing suicide and Hidal Hassan, an Army psychiatrist, killed 13 people at Fort Hood and the responses of ethnic community, the author explains that their mental illness may be derived from their parents’ (or ethnic group) culturally isolated attitude and socially static viewpoint of U.S. (Western system and values). The author insists that multiculturalism may restrict Eastern immigrants’ engagement and involvement in local communities. Multiculturalism has been systematically and historically developed based on Western systems and cultural values. In other words, multiculturalism requires high self-confidence and self-esteem that Eastern immigrants less prioritise them. It has been generally known that Easterners put more weight on human relationship than Westerners, but the author claims that this is not true. Within an individualistic culture, Westerners are more interested in building person-to-person connections and relationships. While Easterners are more interested in how individuals can achieve a sense of belonging within a group and a community. Therefore, multiculturalism is an ideology which forces Eastern immigrants to discard their strong desire to be part of a group and does not give a sense of belonging. In a consequence, the author advises that Eastern immigrants should aim towards “transculturalism” which allows them to actively participate in and contribute to their multicultural community. Transculturalism does not ask Easterners to discard their cultural values, but enables them to be a collectivistic individualist (a community leader) who is capable of developing new cultural values in a more creative and productive way. Furthermore, transculturalism encourages Western Australians in a multicultural context to collaborate with ethnic minorities to build a better community.

The role of bricolage and resource constraints in high potential sustainability ventures

Sustainability decisions and their impacts may be among the greatest challenges facing the world in the 21st century (Davos 2000). Apart from adaptation on the part of established organizations these challenges are arguably going to require solutions developed by new actors However, young ventures have only recently begun generating research interest within sustainability literature (Shepherd et al. 2009). In particular, little is known about resource behaviours of these ventures and how they adapt to substantial resource constraints. One promising theory that has been identified as a way that some entrepreneurs manage constraints is bricolage: a construct defined as “making do by applying combinations of the resources at hand to new problems and opportunities” (Baker and Nelson 2005: 333). Bricolage may be critical as the means of continued venture success as these ventures are frequently developed in severe resource constraint, owing to higher levels of technical sophistication (Rothaermel and Deeds 2006). Further, they are often developed by entrepreneurs committed to personal and social goals of resourcefulness, including values that focus on conservation rather than consumption of resources (Shepherd et al. 2009). In this paper, using seven novel cases of high potential sustainability firms from CAUSEE we consider how constraints impact resource behaviours and further illustrate and extend bricolage domains previously developed by Baker and Nelson (2005) with recommendations for theory and practice provided.

Grade A Taipei junior high school principals’ self-reported leadership practices

The principal’s leadership and curriculum development are considered the core elements for creating a high performing junior high school. In Taiwan, mathematics curriculum reform has been an ongoing topic since 1994. The pedagogy, classroom interactions, and the underlying philosophy of mathematics education have varied with different versions of guidelines. These changes inevitably increase the requirement for principals’ leadership in order to effectively implement the curriculum reform. Principals’ leadership is essential to the success of the implementation in their school. This study aimed to explore and identify the leadership of junior high school principals whose schools had been judged by the Taipei City Government as Grade A junior high schools. Principals’ implementations of the reformed mathematics curriculum were used as examples to generate insights of their leadership. This study drew upon a multiple-case study approach. Data were collected from interviews, observations, and documentations. Bass and Avolio’s (1997) full range leadership theory provided a structure for gaining insight into these principals’ leadership practices. Five Grade A Taipei junior high school principals participated and shared their leadership concepts and experiences. Findings revealed that the leadership preferences of the five principles varied considerably. Management by exception-active, contingent reward, individualised consideration, and idealised influence were Grade A Taipei junior high school principals’ preferred leadership practices. In addition, principals’ leadership strategies associated with these practices were identified. These principals had adopted a range of leadership strategies according to the staff and school needs. Results of this study have implications for both Taiwanese principals and education departments. Principals can enhance their leadership by gaining more understanding about the Grade A principals’ leadership practices and strategies. Taiwanese education departments can improve school leadership training programs by focusing on these practices and strategies, which may also lead to more effective strategies for implementing national curriculum reform.

Accurate urban road model reconstruction from high resolution remotely sensed imagery based on Support Vector Machine and Gabor filters

In this paper, we presented an automatic system for precise urban road model reconstruction based on aerial images with high spatial resolution. The proposed approach consists of two steps: i) road surface detection and ii) road pavement marking extraction. In the first step, support vector machine (SVM) was utilized to classify the images into two categories: road and non-road. In the second step, road lane markings are further extracted on the generated road surface based on 2D Gabor filters. The experiments using several pan-sharpened aerial images of Brisbane, Queensland have validated the proposed method.

Dynamics of pattern writing and erasure in photorefractive lithium niobate for data storage applications

The present rate of technological advance continues to place significant demands on data storage devices. The sheer amount of digital data being generated each year along with consumer expectations, fuels these demands. At present, most digital data is stored magnetically, in the form of hard disk drives or on magnetic tape. The increase in areal density (AD) of magnetic hard disk drives over the past 50 years has been of the order of 100 million times, and current devices are storing data at ADs of the order of hundreds of gigabits per square inch. However, it has been known for some time that the progress in this form of data storage is approaching fundamental limits. The main limitation relates to the lower size limit that an individual bit can have for stable storage. Various techniques for overcoming these fundamental limits are currently the focus of considerable research effort. Most attempt to improve current data storage methods, or modify these slightly for higher density storage. Alternatively, three dimensional optical data storage is a promising field for the information storage needs of the future, offering very high density, high speed memory. There are two ways in which data may be recorded in a three dimensional optical medium; either bit-by-bit (similar in principle to an optical disc medium such as CD or DVD) or by using pages of bit data. Bit-by-bit techniques for three dimensional storage offer high density but are inherently slow due to the serial nature of data access. Page-based techniques, where a two-dimensional page of data bits is written in one write operation, can offer significantly higher data rates, due to their parallel nature. Holographic Data Storage (HDS) is one such page-oriented optical memory technique. This field of research has been active for several decades, but with few commercial products presently available. Another page-oriented optical memory technique involves recording pages of data as phase masks in a photorefractive medium. A photorefractive material is one by which the refractive index can be modified by light of the appropriate wavelength and intensity, and this property can be used to store information in these materials. In phase mask storage, two dimensional pages of data are recorded into a photorefractive crystal, as refractive index changes in the medium. A low-intensity readout beam propagating through the medium will have its intensity profile modified by these refractive index changes and a CCD camera can be used to monitor the readout beam, and thus read the stored data. The main aim of this research was to investigate data storage using phase masks in the photorefractive crystal, lithium niobate (LiNbO3). Firstly the experimental methods for storing the two dimensional pages of data (a set of vertical stripes of varying lengths) in the medium are presented. The laser beam used for writing, whose intensity profile is modified by an amplitudemask which contains a pattern of the information to be stored, illuminates the lithium niobate crystal and the photorefractive effect causes the patterns to be stored as refractive index changes in the medium. These patterns are read out non-destructively using a low intensity probe beam and a CCD camera. A common complication of information storage in photorefractive crystals is the issue of destructive readout. This is a problem particularly for holographic data storage, where the readout beam should be at the same wavelength as the beam used for writing. Since the charge carriers in the medium are still sensitive to the read light field, the readout beam erases the stored information. A method to avoid this is by using thermal fixing. Here the photorefractive medium is heated to temperatures above 150�C; this process forms an ionic grating in the medium. This ionic grating is insensitive to the readout beam and therefore the information is not erased during readout. A non-contact method for determining temperature change in a lithium niobate crystal is presented in this thesis. The temperature-dependent birefringent properties of the medium cause intensity oscillations to be observed for a beam propagating through the medium during a change in temperature. It is shown that each oscillation corresponds to a particular temperature change, and by counting the number of oscillations observed, the temperature change of the medium can be deduced. The presented technique for measuring temperature change could easily be applied to a situation where thermal fixing of data in a photorefractive medium is required. Furthermore, by using an expanded beam and monitoring the intensity oscillations over a wide region, it is shown that the temperature in various locations of the crystal can be monitored simultaneously. This technique could be used to deduce temperature gradients in the medium. It is shown that the three dimensional nature of the recording medium causes interesting degradation effects to occur when the patterns are written for a longer-than-optimal time. This degradation results in the splitting of the vertical stripes in the data pattern, and for long writing exposure times this process can result in the complete deterioration of the information in the medium. It is shown in that simply by using incoherent illumination, the original pattern can be recovered from the degraded state. The reason for the recovery is that the refractive index changes causing the degradation are of a smaller magnitude since they are induced by the write field components scattered from the written structures. During incoherent erasure, the lower magnitude refractive index changes are neutralised first, allowing the original pattern to be recovered. The degradation process is shown to be reversed during the recovery process, and a simple relationship is found relating the time at which particular features appear during degradation and recovery. A further outcome of this work is that the minimum stripe width of 30 ìm is required for accurate storage and recovery of the information in the medium, any size smaller than this results in incomplete recovery. The degradation and recovery process could be applied to an application in image scrambling or cryptography for optical information storage. A two dimensional numerical model based on the finite-difference beam propagation method (FD-BPM) is presented and used to gain insight into the pattern storage process. The model shows that the degradation of the patterns is due to the complicated path taken by the write beam as it propagates through the crystal, and in particular the scattering of this beam from the induced refractive index structures in the medium. The model indicates that the highest quality pattern storage would be achieved with a thin 0.5 mm medium; however this type of medium would also remove the degradation property of the patterns and the subsequent recovery process. To overcome the simplistic treatment of the refractive index change in the FD-BPM model, a fully three dimensional photorefractive model developed by Devaux is presented. This model shows significant insight into the pattern storage, particularly for the degradation and recovery process, and confirms the theory that the recovery of the degraded patterns is possible since the refractive index changes responsible for the degradation are of a smaller magnitude. Finally, detailed analysis of the pattern formation and degradation dynamics for periodic patterns of various periodicities is presented. It is shown that stripe widths in the write beam of greater than 150 ìm result in the formation of different types of refractive index changes, compared with the stripes of smaller widths. As a result, it is shown that the pattern storage method discussed in this thesis has an upper feature size limit of 150 ìm, for accurate and reliable pattern storage.

Handhelds nuture inquiring minds : an Australian high school case study

Technology is not always introduced into educational contexts in ways that position pedagogy to the fore. In optimizing learning, forward looking approaches require that we question what it means to be an educated person in the 21st Century and how individuals should engage with technologies to be suitably equipped for emergent knowledge age work. Responses to such ideas typically emphasize collaborative knowledge building where technology is employed as a tool to think with and allows for the active messing with and the development of ideas, rather than merely being a passive window to information. This paper discusses a very deliberate attempt to address a range of imperatives and competing demands within a high school setting where wireless handheld technologies integrated with a learning management system (Moodle) are used to scaffold and implement knowledge sharing and knowledge-building within the school community.

Expectations, obligations or promises? A conceptual review and revision of the beliefs comprising the psychological contract

The psychological contract is a frequently deployed construct to examine the dynamics of the employee-employer exchange relationship. While there is consensus that the contract comprises employee and employer beliefs regarding this relationship, the various belief types are not conceptually well-defined and understood. Over time, the contract has been conceptualised as comprising expectations, obligations, promises or some combination therein. While most contemporary researchers focus solely upon promises, the justifications for this position are unpersuasive. This paper theoretically describes the various belief types, identifies their interrelationships and proposes a reconceptualisation of the beliefs constituting the contract. Specifically, it is demonstrated that the extant promise-based belief framework provides too restrictive a theoretical base for a comprehensive understanding of individuals’ psychological contracts.

High-stakes national testing: it's global, it's here to stay, and graduating teachers need to know about it

My oldest daughter recently secured a position as a Science/Geography teacher in a P-12 Catholic College in regional Queensland. This paper looks at the teaching world into which she has graduated. Specifically, the paper will outline and discuss findings from a survey of graduating early childhood student teachers in relation to their knowledge and skills of the current regime of high-stakes testing in Australia. The paper argues that understanding accountability and possessing skills to scrutinise test data are essential for the new teacher as s/he enters a profession in which governments world-wide are demanding a return for their investment in education. The paper will examine literature on accountability and surveillance in the form of high-stakes testing from global, school and classroom perspectives. It makes the claim that it is imperative for beginning teachers to be able to interpret high-stakes test data and considers the skills required to do this. The paper also draws on local research to comment on the readiness of graduates to meet this comparatively new professional demand.

High bandwidth voltage and current control design for voltage source converters

In this paper, two different high bandwidth converter control strategies are discussed. One of the strategies is for voltage control and the other is for current control. The converter, in each of the cases, is equipped with an output passive filter. For the voltage controller, the converter is equipped with an LC filter, while an output has an LCL filter for current controller. The important aspect that has been discussed the paper is to avoid computation of unnecessary references using high-pass filters in the feedback loop. The stability of the overall system, including the high-pass filters, has been analyzed. The choice of filter parameters is crucial for achieving desirable system performance. In this paper, the bandwidth of achievable performance is presented through frequency (Bode) plot of the system gains. It has been illustrated that the proposed controllers are capable of tracking fundamental frequency components along with low-order harmonic components. Extensive simulation results are presented to validate the control concepts presented in the paper.

EduBuilding: material selection from life cycle costing sensitivity

Life Cycle Cost Analysis provides a form of synopsis of the initial and consequential costs of building related decisions. These cost figures may be implemented to justify higher investments, for example, in the quality or flexibility of building solutions through a long term cost reduction. The emerging discipline of asset mnagement is a promising approach to this problem, because it can do things that techniques such as balanced scorecards and total quantity cannot. Decisions must be made about operating and maintaining infrastructure assets. An injudicious sensitivity of life cycle costing is that the longer something lasts, the less it costs over time. A life cycle cost analysis will be used as an economic evaluation tool and collaborate with various numbers of analyses. LCCA quantifies incurring costs commonly overlooked (by property and asset managers and designs) as replacement and maintenance costs. The purpose of this research is to examine the Life Cycle Cost Analysis on building floor materials. By implementing the life cycle cost analysis, the true cost of each material will be computed projecting 60 years as the building service life and 5.4% as the inflation rate percentage to classify and appreciate the different among the materials. The analysis results showed the high impact in selecting the floor materials according to the potential of service life cycle cost next.

Estimating the cost of health care–associated infections : mind your p’s and q’s

Monetary valuations of the economic cost of health care–associated infections (HAIs) are important for decision making and should be estimated accurately. Erroneously high estimates of costs, designed to jolt decision makers into action, may do more harm than good in the struggle to attract funding for infection control. Expectations among policy makers might be raised, and then they are disappointed when the reduction in the number of HAIs does not yield the anticipated cost saving. For this article, we critically review the field and discuss 3 questions. Why measure the cost of an HAI? What outcome should be used to measure the cost of an HAI? What is the best method for making this measurement? The aim is to encourage researchers to collect and then disseminate information that accurately guides decisions about the economic value of expanding or changing current infection control activities.