301 resultados para enterprises
Resumo:
Investigates the braking performance requirements of the UltraCommuter, a lightweight series hybrid electric vehicle currently under development at the University of Queensland. With a predicted vehicle mass of 600 kg and two in-wheel motors each capable of 500 Nm of peak torque, decelerations up to 0.46 g are theoretically possible using purely regenerative braking. With 99% of braking demands less than 0.35 g, essentially all braking can be regenerative. The wheel motors have sufficient peak torque capability to lock the rear wheels in combination with front axle braking, eliminating the need for friction braking at the rear. Emergency braking levels approaching 1 g are achieved by supplementation with front disk brakes. This paper presents equations describing the peak front and rear axle braking forces which occur under straight line braking, including gradients. Conventionally, to guarantee stability, mechanical front/rear proportioning of braking effort ensures that the front axle locks first. In this application, all braking is initially regenerative at the rear, and an adaptive ''by-wire'' proportioning system presented ensures this stability requirement is still satisfied. Front wheel drive and all wheel drive systems are also discussed. Finally, peak and continuous performance measures, not commonly provided for friction brakes, are derived for the UltraCommuter's motor capability and range of operation.
Resumo:
A strong Small and Medium Enterprises (SMEs) sector is said to underpin a competitive advantage of the Australian regions that are struggling to grow the economy, distribute the growth fairly, and in the process not degrade the environment. The concept of Regional Innovation Systems that draws on industrial cluster theory has gained currency as an umbrella framework for enabling the SMEs sector. However, there are significant gaps between research and innovation of such ‘one-size-fits-all’ approach. This paper responds to this gap and proposes a Living Laboratory – an open multidisciplinary and multi-stakeholder action research platform where innovations can be co-created, tested, and evaluated in the every-day environment of SME – as a way to strengthen the SMEs sector in regional Australia.
Resumo:
Despite of significant contributions of urban road transport to global economy and society, it is one of the largest sources of local and global emission impact. In order to address the environmental concerns of urban road transport it is imperative to achieve a holistic understanding of contributory factors causing emissions which requires a complete look onto its whole life cycle. Previous studies were mainly based on segmental views which mostly studied environmental impacts of individual transport modes and very few considered impacts other than operational phase. This study develops an integrated life cycle inventory model for urban road transport emissions from a holistic modal perspective. Singapore case was used to demonstrate the model. Results show that total life cycle greenhouse gas emission from Singapore’s road transport sector is 7.8 million tons per year. The total amount of criteria air pollutants are also estimated in this study.
Resumo:
Research on opportunity has been extensively studied in contexts of new firm or new venture creation (Choi & Shepherd, 2004; Mullins & Forlani, 2005; Ozgen & Baron, 2007) where start-ups and new ventures use both opportunity discovery and opportunity creation (Alvarez & Barney 2005, 2007). Less research is found on examining the relationship between opportunity and innovation in existing firms (with Drucker (1985) an exception). In large firms, opportunity recognition has been analysed in terms of antecedent conditions, elements and outcomes (Ireland, Covin & Kuratko, 2009), but to date less attention has been given to how small and medium enterprises capture and use opportunities to remain competitive. Little research has been carried out regarding how smaller firms use opportunities to create new business with existing customers or use technological advances with new customers to create new economic activity, growth and competitive advantage. This study presents findings from a comparative case analysis of 20 diverse firms in the spatial information industry and identifies constructs associated with identifying opportunities that lead to better business performance and firm level innovation.
Resumo:
This study focuses on the managerial question “should social enterprises become more entrepreneurial?” It adapts the Covin and Slevin (1989) entrepreneurial orientation scale to measure the adoption of entrepreneurship by a social enterprise, and develops a scale that combines a Vincentian based focus to serve the poor with a propensity to take a more entrepreneurial approach toward business as a measure of a social value orientation (SVO).
Resumo:
Purpose The purpose of this paper is to review the growing emphasis on quantifiable performance measures such as social return on investment (SROI) in third sector organisations – specifically, social enterprise – through a legitimacy theory lens. It then examines what social enterprises value (i.e. consider important) in terms of performance evaluation, using a case study approach. Design/methodology/approach Case studies involving interviews, documentary analysis, and observation, of three social enterprises at different life-cycle stages with different funding structures, were constructed to consider “what measures matter” from a practitioner's perspective. Findings Findings highlight a priority on quality outcomes and impacts in primarily qualitative terms to evaluate performance. Further, there is a noticeable lack of emphasis on financial measures other than basic access to financial resources to continue pursuing social goals. Social implications The practical challenges faced by social enterprises – many of which are small to medium sized – in evaluating performance and by implication organisational legitimacy are contrasted with measures such as SROI which are resource intensive and have inherent methodological limitations. Hence, findings suggest the limited and valuable resources of social enterprises would be better allocated towards documenting the actual outcomes and impacts as a first step, in order to evaluate social and financial performance in terms appropriate to each objective, in order to demonstrate organisational legitimacy. Originality/value Findings distinguish between processes which may hold symbolic legitimacy for select stakeholder groups, and processes which hold substantive, cognitive legitimacy for stakeholders more broadly, in the under-researched context of social enterprise.
Resumo:
Technology has advanced in such a manner that the world can now communicate in means previously never thought possible. These new technologies have not been overlooked by transnational organized crime groups and networks of corruption, and have been exploited for criminal success. This text explores the use of communication interception technology (CIT), such as phone taps or email interception, and its potential to cause serious disruption to these criminal enterprises. Exploring the placement of communication interception technology within differing policing frameworks, and how they integrate in a practical manner, the authors demonstrate that CIT is best placed within a proactive, intelligence-led policing framework. They also indicate that if law enforcement agencies in Western countries are serious about fighting transnational organized crime and combating corruption, there is a need to re-evaluate the constraints of interception technology, and the sceptical culture that surrounds intelligence in policing. Policing Transnational Organized Crime and Corruption will appeal to scholars of Law, Criminal Justice and Police Science as well as intelligence analysts and police and security intelligence professionals.
Resumo:
In recent times, technology has advanced in such a manner that the world can now communicate in means previously never thought possible. Transnational organised crime groups, who have exploited these new technologies as basis for their criminal success, however, have not overlooked this development, growth and globalisation. Law enforcement agencies have been confronted with an unremitting challenge as they endeavour to intercept, monitor and analyse these communications as a means of disrupting the activities of criminal enterprises. The challenge lies in the ability to recognise and change tactics to match an increasingly sophisticated adversary. The use of communication interception technology, such as phone taps or email interception, is a tactic that when used appropriately has the potential to cause serious disruption to criminal enterprises. Despite the research that exists on CIT and TOC, these two bodies of knowledge rarely intersect. This paper builds on current literature, drawing them together to provide a clearer picture of the use of CIT in an enforcement and intelligence capacity. It provides a review of the literature pertaining to TOC, the structure of criminal enterprises and the vulnerability of communication used by these crime groups. Identifying the current contemporary models of policing it reviews intelligence-led policing as the emerging framework for modern policing. Finally, it assesses the literature concerning CIT, its uses within Australia and the limitations and arguments that exist. In doing so, this paper provides practitioners with a clearer picture of the use, barriers and benefits of using CIT in the fight against TOC. It helps to bridge the current gaps in modern policing theory and offers a perspective that can help drive future research.
Resumo:
Although the tourism industry has been dramatically altered due to the Internet, there has been limited research published about international entrepreneurial values and Internet use in tourism firms. The findings of this study point to a relationship between the values of Internet-enabled international entrepreneurs in small-sized to medium-sized enterprises and the inclination of the firm to develop and initiate international activity. The findings of this study suggest that Internet-enabled tourism entrepreneurs share similar construct values. Two effective but underutilized qualitative methods were used in this study. The first method, repertory test, is an efficient technique for exploring constructs in decision making; the second method, laddering analysis, facilitates understanding of the perceived consequences and personal values guiding behaviour.
Resumo:
This paper focuses on Australian development firms in the console and mobile games industry in order to understand how small firms in a geographically remote and marginal position in the global industry are able to relate to global firms and capture revenue share. This paper shows that, while technological change in the games industry has resulted in the emergence of new industry segments based on transactional rather than relational forms of economic coordination, in which we might therefore expect less asymmetrical power relations, lead firms retain a position of power in the global games entertainment industry relative to remote developers. This has been possible because lead firms in the emerging mobile devices market have developed and sustained bottlenecks in their segment of the industry through platform competition and the development of an intensely competitive ecosystem of developers. Our research shows the critical role of platform competition and bottlenecks in influencing power asymmetries within global markets.
Resumo:
This paper presents the theory and practice of the Futures Action Model (FAM). FAM has been in development for over a decade, in a number of contexts and iterations. It is a creative methodology that uses a variety of concepts and tools to guide participants through the conception and modeling of enterprises, services, social innovations and projects in the context of emerging futures. It is used to generate strategic options that people can utilise to build opportunities for value creation as they move into the future. This paper details examples in its development, and provides theoretical and practical guidelines for educators and business facilitators to use the FAM system in their own workplaces.
Resumo:
Since the 1970s, the Uppsala stages model has been one of the dominant explanations of firm internationalization. The model's focus on internationalization as a firm's gradual and incremental process of increasing international involvement has attracted much debate, with one criticism being that it is unclear in explaining how the internationalization process first originates within a firm. In this paper, the Uppsala model is extended through the incorporation of a pre-internationalization phase to explore the antecedents of firm internationalization. Adopting the Uppsala model's theoretical underpinnings, this paper develops and operationalizes a pre-internationalization phase decision heuristic in the form of an ‘export readiness index'. Four constructs are proposed that drive and inhibit export commencement decision-making during a firm's preinternationalization phase: export stimuli, attitudinal/psychological commitment, resources and lateral rigidity. Through a survey of Australian exporting and non-exporting small-medium sized enterprises (SMEs), the Export Readiness Index (ERI) is developed through factor analysis and tested using logistic regression. Results of the study and their potential implications are discussed.
Resumo:
This paper surveys the practical benefits and drawbacks of several identity-based encryption schemes based on bilinear pairings. After providing some background on identity-based cryptography, we classify the known constructions into a handful of general approaches. We then describe efficient and fully secure IBE and IBKEM instantiations of each approach, with reducibility to practice as the main design parameter. Finally, we catalogue the strengths and weaknesses of each construction according to a few theoretical and many applied comparison criteria.
Resumo:
We present two unconditional secure protocols for private set disjointness tests. In order to provide intuition of our protocols, we give a naive example that applies Sylvester matrices. Unfortunately, this simple construction is insecure as it reveals information about the intersection cardinality. More specifically, it discloses its lower bound. By using the Lagrange interpolation, we provide a protocol for the honest-but-curious case without revealing any additional information. Finally, we describe a protocol that is secure against malicious adversaries. In this protocol, a verification test is applied to detect misbehaving participants. Both protocols require O(1) rounds of communication. Our protocols are more efficient than the previous protocols in terms of communication and computation overhead. Unlike previous protocols whose security relies on computational assumptions, our protocols provide information theoretic security. To our knowledge, our protocols are the first ones that have been designed without a generic secure function evaluation. More important, they are the most efficient protocols for private disjointness tests in the malicious adversary case.
Resumo:
Repair, maintenance, minor alteration, and addition work (RMAA) has become more and more important in developed societies, but its safety performance is alarming. For example, RMAA projects accounted for 53.2% of the total construction market and the percentage of RMAA accidents to all construction accidents in the Hong Kong Special Administrative Region (HKSAR) increased considerably in 2007. The RMAA sector has a huge potential for safety improvement. This study aims to explore and evaluate the difficulties of implementing safety practices in RMAA work. The mixed methods approach was adopted, and semistructured interviews and a two-round Delphi survey were conducted for the data collection. Major difficulties were identified, including limited safety resources for small and medium enterprises (SMEs), difficulty in changing the mindset of RMAA workers, and difficulty in performing safety supervision. These obstacles for implementing safety practices in the RMAA sector, if successfully removed, could significantly improve the safety performance of the RMAA sector and the construction industry as a whole.