Understanding how axial loads on the spine influence segmental biomechanics for idiopathic scoliosis patients: A magnetic resonance imaging study

Background Segmental biomechanics of the scoliotic spine are important since the overall spinal deformity is comprised of the cumulative coronal and axial rotations of individual joints. This study investigates the coronal plane segmental biomechanics for adolescent idiopathic scoliosis patients in response to physiologically relevant axial compression. Methods Individual spinal joint compliance in the coronal plane was measured for a series of 15 idiopathic scoliosis patients using axially loaded magnetic resonance imaging. Each patient was first imaged in the supine position with no axial load, and then again following application of an axial compressive load. Coronal plane disc wedge angles in the unloaded and loaded configurations were measured. Joint moments exerted by the axial compressive load were used to derive estimates of individual joint compliance. Findings The mean standing major Cobb angle for this patient series was 46°. Mean intra-observer measurement error for endplate inclination was 1.6°. Following loading, initially highly wedged discs demonstrated a smaller change in wedge angle, than less wedged discs for certain spinal levels (+ 2,+1,− 2 relative to the apex, (p < 0.05)). Highly wedged discs were observed near the apex of the curve, which corresponded to lower joint compliance in the apical region. Interpretation While individual patients exhibit substantial variability in disc wedge angles and joint compliance, overall there is a pattern of increased disc wedging near the curve apex, and reduced joint compliance in this region. Approaches such as this can provide valuable biomechanical data on in vivo spinal biomechanics of the scoliotic spine, for analysis of deformity progression and surgical planning.

Fire resistance of light gauge steel frame wall systems lined with gypsum plasterboards

Light gauge steel frame (LSF) wall systems are increasingly used in residential and commercial buildings as load bearing and non-load bearing elements. Conventionally, the fire resistance ratings of such building elements are determined using approximate prescriptive methods based on limited standard fire tests. However, recent studies have shown that in some instances real building fire time-temperature curves could be more severe than the standard fire curve, in terms of maximum temperature and rate of temperature rise. This has caused problems for safe evacuation and rescue activities, and in some instances has also lead to the collapse of buildings earlier than the prescribed fire resistance. Therefore a detailed research study into the performance of LSF wall systems under both standard fire and realistic fire conditions was undertaken using full scale fire tests to understand the fire performance of different LSF wall configurations. Both load bearing and non-load bearing full scale fire tests were performed on LSF walls configurations which included single layer, double layer, externally insulated wall panels made up of different steel sections and thicknesses of gypsum plasterboards. The non-load bearing fire test results were utilized to understand the factors affecting the fire resistance of LSF walls, while loading bearing fire test results led to development of simplified methods to predict the fire resistance ratings of load bearing LSF walls exposed to both standard and realistic design fires. This paper presents the results of full scale experimental study and highlights the effects of standard and realistic fire conditions on fire performance of LSF walls.

Numerical studies of gypsum plasterboard and MGO board lined LSF walls exposed to fire

Fire resistance of cold-formed light gauge steel frame (LSF) wall systems is enhanced by lining them with single or multiple layers of wall boards with varying thermal properties. These wall boards are gypsum plasterboards or Magnesium Oxide (MgO) boards produced by different manufacturers. Thermal properties of these boards appear to show considerable variations and this can lead to varying fire resistance levels (FRL) for their wall systems. Currently FRLs of wall systems are determined using full scale fire tests, but they are time consuming and expensive. Recent research studies on the fire performance of LSF wall systems have used finite element studies to overcome this problem, but they were developed based on 1-D and 2-D finite element platform capable of performing either heat transfer or structural analysis separately. Hence in this research a 3-D finite element model was developed first for LSF walls lined with gypsum plasterboard and cavity insulation materials. Accurate thermal properties of these boards are essential for finite element modelling, and thus they were measured at both ambient and elevated temperatures. This experimental study included specific heat, relative density and thermal conductivity of boards. The developed 3-D finite element model was then validated using the available fire tests results of LSF walls lined with gypsum plasterboard, and is being used to investigate the fire performance of different LSF wall configurations. The tested MgO board exhibited significant variations in their thermal properties in comparison to gypsum plasterboards with about 50% loss of its initial mass at about 500 ºC compared to 16% for gypsum plasterboards. Hence the FRL of MgO board lined LSF wall systems is likely to be significantly reduced. This paper presents the details of this research study on the fire performance of LSF wall systems lined with gypsum plasterboard and MgO board including the developed 3-D finite element models, thermal property tests and the results.

General properties of electrochemical capacitors

The use of capacitors for electrical energy storage actually predates the invention of the battery. Alessandro Volta is attributed with the invention of the battery in 1800, where he first describes a battery as an assembly of plates of two different materials (such as copper and zinc) placed in an alternating stack and separated by paper soaked in brine or vinegar [1]. Accordingly, this device was referred to as Volta’s pile and formed the basis of subsequent revolutionary research and discoveries on the chemical origin of electricity. Before the advent of Volta’s pile, however, eighteenth century researchers relied on the use of Leyden jars as a source of electrical energy. Built in the mid-1700s at the University of Leyden in Holland, a Leyden jar is an early capacitor consisting of a glass jar coated inside and outside with a thin layer of silver foil [2, 3]. With the outer foil being grounded, the inner foil could be charged with an electrostatic generator, or a source of static electricity, and could produce a strong electrical discharge from a small and comparatively simple device.

A Story of Organized Crime: Constructing Criminality and Building Institutions

This is a narrative about the way in which a category of crime-to-be-combated is constructed through the discipline of criminology and the agents of discipline in criminal justice. The aim was to examine organized crime through the eyes of those whose job it is to fight it (and define it), and in doing so investigate the ways social problems surface as sites for state intervention. A genealogy of organized crime within criminological thought was completed, demonstrating that there are a range of different ways organized crime has been constructed within the social scientific discipline, and each of these were influenced by the social context, political winds and intellectual climate of the time. Following this first finding, in-depth qualitative interviews were conducted with individuals who had worked at the apex of the policing of organized crime in Australia, in order to trace their understandings of organized crime across recent history. It was found that organized crime can be understood as an object of the discourse of the politics of law and order, the discourse of international securitization, new public management in policing business, and involves the forging of outlaw identities. Therefore, there are multiple meanings of organized crime that have arisen from an interconnected set of social, political, moral and bureaucratic discourses. The institutional response to organized crime, including law and policing, was subsequently examined. An extensive legislative framework has been enacted at multiple jurisdictional levels, and the problem of organized crime was found to be deserving of unique institutional powers and configurations to deal with it. The social problem of organized crime, as constituted by the discourses mapped out in this research, has led to a new generation of increasingly preemptive and punitive laws, and the creation of new state agencies with amplified powers. That is, the response to organized crime, with a focus on criminalization and enforcement, has been driven and shaped by the four discourses and the way in which the phenomenon is constructed within them. An appreciation of the nexus between the emergence of the social problem, and the formation of institutions in response to it, is important in developing a more complete understanding of the various dimensions of organized crime.

Feasibility of a stepped wedge cluster RCT and concurrent observational sub-study to evaluate the effects of modified ward night lighting on inpatient fall rates and sleep quality: A protocol for a pilot trial

Background: Falls among hospitalised patients impose a considerable burden on health systems globally and prevention is a priority. Some patient-level interventions have been effective in reducing falls, but others have not. An alternative and promising approach to reducing inpatient falls is through the modification of the hospital physical environment and the night lighting of hospital wards is a leading candidate for investigation. In this pilot trial, we will determine the feasibility of conducting a main trial to evaluate the effects of modified night lighting on inpatient ward level fall rates. We will test also the feasibility of collecting novel forms of patient level data through a concurrent observational sub-study. Methods/design: A stepped wedge, cluster randomised controlled trial will be conducted in six inpatient wards over 14 months in a metropolitan teaching hospital in Brisbane (Australia). The intervention will consist of supplementary night lighting installed across all patient rooms within study wards. The planned placement of luminaires, configurations and spectral characteristics are based on prior published research and pre-trial testing and modification. We will collect data on rates of falls on study wards (falls per 1000 patient days), the proportion of patients who fall once or more, and average length of stay. We will recruit two patients per ward per month to a concurrent observational sub-study aimed at understanding potential impacts on a range of patient sleep and mobility behaviour. The effect on the environment will be monitored with sensors to detect variation in light levels and night-time room activity. We will also collect data on possible patient-level confounders including demographics, pre-admission sleep quality, reported vision, hearing impairment and functional status. Discussion: This pragmatic pilot trial will assess the feasibility of conducting a main trial to investigate the effects of modified night lighting on inpatient fall rates using several new methods previously untested in the context of environmental modifications and patient safety. Pilot data collected through both parts of the trial will be utilised to inform sample size calculations, trial design and final data collection methods for a subsequent main trial.

Maternal and paternal support for physical activity and healthy eating in preschool children: A cross-sectional study

BACKGROUND Parental support is a key influence on children's health behaviours; however, no previous investigation has simultaneously explored the influence of mothers' and fathers' social support on eating and physical activity in preschool-aged children. This study evaluated the singular and combined effects of maternal and paternal support for physical activity (PA) and fruit and vegetable consumption (FV) on preschoolers' PA and FV. METHODS A random sample comprising 173 parent-child dyads completed validated scales assessing maternal and paternal instrumental support and child PA and FV behaviour. Pearson correlations, controlling for child age, parental age, and parental education, were used to evaluate relationships between maternal and paternal support and child PA and FV. K-means cluster analysis was used to identify families with distinct patterns of maternal and paternal support for PA and FV, and one-way ANOVA examined the impact of cluster membership on child PA and FV. RESULTS Maternal and paternal support for PA were positively associated with child PA (r = 0.37 and r = 0.36, respectively; P < 0.001). Maternal but not paternal support for FV was positively associated with child FV (r = 0.35; P < 0.001). Five clusters characterised groups of families with distinct configurations of maternal and paternal support for PA and FV: 1) above average maternal and paternal support for PA and FV, 2) below average maternal and paternal support for PA and FV, 3) above average maternal and paternal support for PA but below average maternal and paternal support for FV, 4) above average maternal and paternal support for FV but below average maternal and paternal support for PA, and 5) above average maternal support but below average paternal support for PA and FV. Children from families with above average maternal and paternal support for both health behaviours had higher PA and FV levels than children from families with above average support for just one health behaviour, or below average support for both behaviours. CONCLUSIONS The level and consistency of instrumental support from mothers and fathers for PA and FV may be an important target for obesity prevention in preschool-aged children.

The culture digitally festival of memeology: An introduction

The collection of essays set to roll out on Culture Digitally over the next month began its life as a pair of panels spanning the last two annual meetings of the International Communication Association. At the 2014 meetings in Seattle, Washington and the 2015 meetings in San Juan, Puerto Rico, various configurations of the contributors in this collection met to discuss the cultures and communicative practices associated with internet memes and viral media. Our shared goal was to bring smart people together to start to think about these digital media genres—still emerging only a few years ago and now seemingly ubiquitous—above the level of the individual example. Together, we asked questions about how internet memes and viral media might be defined, their roles in popular culture, their relationships to far older scientific and scholarly traditions, and their public implications. Two years and two discussions that ended too quickly later, we decided to write up some of our key arguments from the panels. We’ve compiled these write-ups here, in what we’ve taken to calling “The Culture Digitally Festival of Memeology.” - See more at: http://culturedigitally.org/2015/10/00-the-culture-digitally-festival-of-memeology-an-introduction-ryan-m-milner-jean-burgess/#sthash.2KzDogso.dpuf

DNP3 network scanning and reconnaissance for critical infrastructure

The Distributed Network Protocol v3.0 (DNP3) is one of the most widely used protocols to control national infrastructure. The move from point-to-point serial connections to Ethernet-based network architectures, allowing for large and complex critical infrastructure networks. However, networks and con- figurations change, thus auditing tools are needed to aid in critical infrastructure network discovery. In this paper we present a series of intrusive techniques used for reconnaissance on DNP3 critical infrastructure. Our algorithms will discover DNP3 outstation slaves along with their DNP3 addresses, their corresponding master, and class object configurations. To validate our presented DNP3 reconnaissance algorithms and demonstrate it’s practicality, we present an implementation of a software tool using a DNP3 plug-in for Scapy. Our implementation validates the utility of our DNP3 reconnaissance technique. Our presented techniques will be useful for penetration testing, vulnerability assessments and DNP3 network discovery.

Studies on the out-of-plane behaviour of masonry walls

The prime aim of this PhD thesis is to contribute to the current body of knowledge on the out-of-plane performance of masonry walls through systematic investigation of the key parameters and provide insight into the design clauses of Australian Masonry Standard (AS3700-2011). The research work has been carried out through numerical simulation based on a 3D layered shell element model. The model demonstrated capability to simulate various forms of new and existing masonry systems commonly constructed in Australia such as unreinforced, internally and externally reinforced, confined and dry-stack masonry. In addition, the model simultaneously simulates in-plane and out-of-plane responses.

Flow field and traverse times for fan forced injection of fumigant via circular or annular inlet into stored grain

Fan forced injection of phosphine gas fumigant into stored grain is a common method to treat infestation by insects. For low injection velocities the transport of fumigant can be modelled as Darcy flow in a porous medium where the gas pressure satisfies Laplace's equation. Using this approach, a closed form series solution is derived for the pressure, velocity and streamlines in a cylindrically stored grain bed with either a circular or annular inlet, from which traverse times are numerically computed. A leading order closed form expression for the traverse time is also obtained and found to be reasonable for inlet configurations close to the central axis of the grain storage. Results are interpreted for the case of a representative 6m high farm wheat store, where the time to advect the phosphine to almost the entire grain bed is found to be approximately one hour.

Formal network behaviour analysis using model checking

In this research we modelled computer network devices to ensure their communication behaviours meet various network standards. By modelling devices as finite-state machines and examining their properties in a range of configurations, we discovered a flaw in a common network protocol and produced a technique to improve organisations' network security against data theft.

Expecting the unexpected: Kathryn Kelly : La Boite Indie Fresh Ground

Compare your last night of theatre with your first. Like internet dating, the consummation is the same, but the rules of engagement have changed. A decade of ‘independent seasons’ nested within our mainstages has littered the moat-like foyers of our state-funded theatres with couches, reshaped their intractable prosceniums into new configurations and collapsed many of the traditional artform hierarchies.

Rational design of 3D dendritic TiO2 nanostructures with favorable architectures

Controlling the morphology and size of titanium dioxide (TiO2) nanostructures is crucial to obtain superior photocatalytic, photovoltaic, and electrochemical properties. However, the synthetic techniques for preparing such structures, especially those with complex configurations, still remain a challenge because of the rapid hydrolysis of Ti-containing polymer precursors in aqueous solution. Herein, we report a completely novel approach-three- dimensional (3D) TiO2 nanostructures with favorable dendritic architectures-through a simple hydrothermal synthesis. The size of the 3D TiO2 dendrites and the morphology of the constituent nano-units, in the form of nanorods, nanoribbons, and nanowires, are controlled by adjusting the precursor hydrolysis rate and the surfactant aggregation. These novel configurations of TiO2 nanostructures possess higher surface area and superior electrochemical properties compared to nanoparticles with smooth surfaces. Our findings provide an effective solution for the synthesis of complex TiO2 nano-architectures, which can pave the way to further improve the energy storage and energy conversion efficiency of TiO 2-based devices.

Evaluation of material crack using acoustic emission technique

Cracks in civil structures can result in premature failure due to material degradation and can result in both financial loss and environmental consequences. This thesis reports an effective technique using Acoustic Emission (AE) technique to assess the severity of the crack propagation in steel structures. The outcome of this work confirms that combination of AE parametric analysis and signal processing techniques can be used to evaluate crack propagation under different loading configurations. The technique has potential application to assess and monitor the condition of civil structures.