Regulating supply-chains to address the occupational health and safety problems associated with precarious employment: The case of home-based clothing workers in Australia

Over the past 20 years the labour market, workforce and work organisation of most if not all industrialised countries have been significantly refashioned by the increased use of more flexible work arrangements, variously labelled as precarious employment or contingent work. There is now a substantial and growing body of international evidence that many of these arrangements are associated with a significant deterioration in occupational health and safety (OHS), using a range of measures such as injury rates, disease, hazard exposures and work-related stress. Moreover, there is an emerging body of evidence that these arrangements pose particular problems for conventional regulatory regimes. Recognition of these problems has aroused the concern of policy makers - especially in Europe, North America and Australia - and a number of responses have been adopted in terms of modifying legislation, producing new guidance material and codes of practice and revised enforcement practices. This article describes one such in itiative in Australia with regard to home-based clothing workers. The regulatory strategy developed in one Australian jurisdiction (and now being ‘exported’ into others) seeks to counter this process via contractual tracking mechanisms to follow the work, tie in liability and shift overarching legal responsibility to the top of the supply chain. The process also entails the integration of minimum standards relating to wages, hours and working conditions; OHS and access to workers’ compensation. While home-based clothing manufacture represents a very old type of ‘flexible’ work arrangement, it is one that regulators have found especially difficult to address. Further, the elaborate multi-tiered subcont racting and diffuse work locations found in this industry are also characteristic of newer forms of contingent work in other industries (such as some telework) and the regulatory challenges they pose (such as the tendency of elaborate supply chains to attenuate and fracture statutory responsibilities, at least in terms of the attitudes and behaviour of those involved).

Short-data recursive HMM parameter estimation for rapid vision-based aircraft heading estimation

Rapid recursive estimation of hidden Markov Model (HMM) parameters is important in applications that place an emphasis on the early availability of reasonable estimates (e.g. for change detection) rather than the provision of longer-term asymptotic properties (such as convergence, convergence rate, and consistency). In the context of vision- based aircraft (image-plane) heading estimation, this paper suggests and evaluates the short-data estimation properties of 3 recursive HMM parameter estimation techniques (a recursive maximum likelihood estimator, an online EM HMM estimator, and a relative entropy based estimator). On both simulated and real data, our studies illustrate the feasibility of rapid recursive heading estimation, but also demonstrate the need for careful step-size design of HMM recursive estimation techniques when these techniques are intended for use in applications where short-data behaviour is paramount.

On standby? A comparison of online and offline witnesses to bullying and their bystander behaviour

Given their ubiquitous presence as witnesses to school-yard bullying, the role of the ‘bystander’ has been studied extensively. The prevalence and behaviour of bystanders to cyberbullying, however, is less understood. In an anonymous, school-based questionnaire, 716 secondary school students from South-East Queensland reported whether they had witnessed traditional and/or cyberbullying, and how they responded to each type. Overlap in bystander roles between online and offline environments was examined, as was their relationship to age and gender. Students who witnessed traditional bullying were more likely to have witnessed cyberbullying. Bystanders’ behaviour was sometimes similar in both contexts of traditional and cyberbullying, mainly if they were outsiders but half of the 256 students who reported witnessing both traditional and cyberbullying, acted in different roles across the two environments. The implications of the findings are discussed in the context of previous research on cyberbullying and traditional-bystanders. Future research should further explore the role of bystanders online, including examining whether known predictors of traditional-bystander behaviour similarly predict cyber-bystander behaviour.

Predicting Australian adults' sun-safe behaviour : examining the role of personal and social norms

Objectives To address the scarcity of comprehensive, theory-based research in the Australian context, this study, using a theory of planned behaviour (TPB) framework, investigated the role of personal and social norms to identify the key predictors of adult Australians' sun-safe intentions and behaviour. Design The study used a prospective design with two waves of data collection, 1 week apart. Methods Participants were 816 adults (48.2% men) aged between 18 and 88 years recruited from urban, regional, and rural areas of Australia. At baseline, participants completed a questionnaire assessing the standard TPB predictors (attitude, subjective norm, and perceived behavioural control [PBC]), past behaviour, behavioural intention, and additional measures of group norm for the referent groups of friends and family, image norm, personal norm, personal choice/responsibility, and Australian identity. Seventy-one per cent of the participants (n = 577) reported on their sun-safe behaviour in the subsequent week. Results Via path modelling, past behaviour, attitude, group norm (friends), personal norm, and personal choice/responsibility emerged as independent predictors of intentions which, in turn, predicted sun-safe behaviour prospectively. Past behaviour, but not PBC, had direct effects on sun-safe behaviour. The model explained 61.6% and 43.9% of the variance in intention and behaviour, respectively. Conclusions This study provides support for the use of a comprehensive theoretical decision-making model to explain Australian adults' sun-safe intentions and behaviours and identifies viable targets for health-promoting messages in this high-risk context.

Gen Y recruitment: Understanding graduate intentions to join an organisation using the Theory of Planned Behaviour

Purpose Using the Theory of Planned Behaviour (TPB) framework, this study explored whether the standard TPB constructs explained variance in Gen Y individuals’ intentions to join their ideal organisation. Design/methodology/approach A mixed methods approach was used featuring qualitative and quantitative methods. Findings The overall TPB model accounted for a significant 51.6% of the variance in intention to join one’s ideal organisation in the next six months with the significant predictors in the model being subjective norm and perceived behaviour control but not attitude. Research limitations/implications Using graduating students from a single Australian university sample may mean that the current findings may not extend to all Gen Y individuals. The current study has demonstrated the explanatory utility of the TPB in relation to graduate Gen Y’s intention to join their ideal organisation, providing further evidence of the robustness of the TPB framework in an organisational setting. Practical implications These findings have implications for enhancing understanding of the most effective recruitment processes for Gen Y students entering the workforce. The findings could inform recruitment policies and strategies to attract Gen Y applicants. Originality/value To our knowledge this study is the first application of the TPB to this topic. The current research extends the recruitment literature with a theoretically-based investigation. Identification of factors which inform organisational recruitment strategies, allow organisations to stand out from their competitors and potentially achieve a larger application pool from which to select the best human capital and sustain competitive advantage.

Do dissonants in transit oriented development adjust commuting travel behaviour?

Residential dissonance signifies a mismatch between an individual’s preferred and actual proximal land use patterns in residential neighbourhoods, whereas residential consonance signifies agreement between actual and preferred proximal land uses. Residential dissonance is a relatively unexplored theme in the literature, yet it acts as a barrier to the development of sustainable transport and land use policy. This research identifies mode choice behaviour of four groups living in transit oriented development (TOD) and non-TOD areas in Brisbane, Australia using panel data from 2675 commuters: TOD consonants, TOD dissonants, non-TOD consonants, and non-TOD dissonants. The research investigates a hypothetical understanding that dissonants adjust their travel attitudes and perceptions according to their surrounding land uses over time. The adjustment process was examined by comparing the commuting mode choice behaviour of dissonants between 2009 and 2011. Six binary logistic regression models were estimated, one for each of the three modes considered (e.g. public transport, active transport, and car) and one for each of the 2009 and 2011 waves. Results indicate that TOD dissonants and non-TOD consonants were less likely to use the public transport and active transport; and more likely to use the car compared with TOD consonants. Non-TOD dissonants use public transport and active transport equally to TOD consonants. The results suggest that commuting mode choice behaviour is largely determined by travel attitudes than built environment factors; however, the latter influence public transport and car use propensity. This research also supports the view that dissonants adjust their attitudes to surrounding land uses, but very slowly. Both place (e.g. TOD development) and people-based (e.g. motivational) policies are needed for an effective travel behavioural shift.

A strain-based failure criterion for pillar stability analysis

Strain-based failure criteria have several advantages over stress-based failure criteria: they can account for elastic and inelastic strains, they utilise direct, observables effects instead of inferred effects (strain gauges vs. stress estimates), and model complete stress-strain curves including pre-peak, non-linear elasticity and post-peak strain weakening. In this study, a strain-based failure criterion derived from thermodynamic first principles utilising the concepts of continuum damage mechanics is presented. Furthermore, implementation of this failure criterion into a finite-element simulation is demonstrated and applied to the stability of underground mining coal pillars. In numerical studies, pillar strength is usually expressed in terms of critical stresses or stress-based failure criteria where scaling with pillar width and height is common. Previous publications have employed the finite-element method for pillar stability analysis using stress-based failure criterion such as Mohr-Coulomb and Hoek-Brown or stress-based scalar damage models. A novel constitutive material model, which takes into consideration anisotropy as well as elastic strain and damage as state variables has been developed and is presented in this paper. The damage threshold and its evolution are strain-controlled, and coupling of the state variables is achieved through the damage-induced degradation of the elasticity tensor. This material model is implemented into the finite-element software ABAQUS and can be applied to 3D problems. Initial results show that this new material model is capable of describing the non-linear behaviour of geomaterials commonly observed before peak strength is reached as well as post-peak strain softening. Furthermore, it is demonstrated that the model can account for directional dependency of failure behaviour (i.e. anisotropy) and has the potential to be expanded to environmental controls like temperature or moisture.

A randomised controlled trial of an online theory-based intervention to improve adult Australians' sun-protective behaviours

Objective. To evaluate the effectiveness of a single-session online theory of planned behaviour (TPB)-based intervention to improve sun-protective attitudes and behaviour among Australian adults. Methods. Australian adults (N = 534; 38.7% males; Mage = 39.3 years) from major cities (80.9%), regional (17.6%) and remote areas (1.5%)were recruited and randomly allocated to an intervention (N=265) and information only group (N = 267). The online intervention focused on fostering positive attitudes, perceptions of normative support, and control perceptions for sun protection. Participants completed questionnaires assessing standard TPB measures (attitude, subjective norm, perceived behavioural control, intention, behaviour) and extended TPB constructs of group norm (friends, family), personal norm, and image norm, pre-intervention (Time 1) and one week (Time 2) and one month post-intervention (Time 3). Repeated Measures Multivariate Analysis of Variance tested intervention effects across time. Results. Intervention participants reported more positive attitudes towards sun protection and used sunprotective measures more often in the subsequent month than participants receiving information only. The intervention effects on control perceptions and norms were non-significant. Conclusions. A theory-based online intervention fostering more favourable attitudes towards sun safety can increase sun protection attitudes and self-reported behaviour among Australian adults in the short term.

Consumer Behaviour : Buying, Having, Being (3e)

Consumer behaviour is more than buying things; it also embraces the study of how having (or not having) things affects our lives and how possessions influence the way we feel about ourselves and each other - our state of being. The 3rd edition of Consumer Behaviour is presented in a contemporary framework based around the buying, having and being model and in an Australasian context. Students will be engaged and excited by the most current research, real-world examples, global coverage, managerial applications and ethical examples to cover all facets of consumer behaviour. With new coverage of Personality and incorporating real consumer data, Consumer Behaviour is fresh, relevant and up-to-date . It provides students with the best possible introduction to this fascinating discipline.

An agent-based approach to immune modelling

This study focuses on trying to understand why the range of experience with respect to HIV infection is so diverse, especially as regards to the latency period. The challenge is to determine what assumptions can be made about the nature of the experience of antigenic invasion and diversity that can be modelled, tested and argued plausibly. To investigate this, an agent-based approach is used to extract high-level behaviour which cannot be described analytically from the set of interaction rules at the cellular level. A prototype model encompasses local variation in baseline properties contributing to the individual disease experience and is included in a network which mimics the chain of lymphatic nodes. Dealing with massively multi-agent systems requires major computational efforts. However, parallelisation methods are a natural consequence and advantage of the multi-agent approach. These are implemented using the MPI library.

Agent-based modelling of viral infection

The three phases of the macroscopic evolution of the HIV infection are well known, but it is still difficult to understand how the cellular-level interactions come together to create this characteristic pattern and, in particular, why there are such differences in individual responses. An 'agent-based' approach is chosen as a means of inferring high-level behaviour from a small set of interaction rules at the cellular level. Here the emphasis is on cell mobility and viral mutations.

Family-based programmes for preventing smoking by children and adolescents (Review)

Background There is evidence that family and friends influence children's decisions to smoke. Objectives To assess the effectiveness of interventions to help families stop children starting smoking. Search methods We searched 14 electronic bibliographic databases, including the Cochrane Tobacco Addiction Group specialized register, MEDLINE, EMBASE, PsycINFO, CINAHL unpublished material, and key articles' reference lists. We performed free-text internet searches and targeted searches of appropriate websites, and hand-searched key journals not available electronically. We consulted authors and experts in the field. The most recent search was 3 April 2014. There were no date or language limitations. Selection criteria Randomised controlled trials (RCTs) of interventions with children (aged 5-12) or adolescents (aged 13-18) and families to deter tobacco use. The primary outcome was the effect of the intervention on the smoking status of children who reported no use of tobacco at baseline. Included trials had to report outcomes measured at least six months from the start of the intervention. Data collection and analysis We reviewed all potentially relevant citations and retrieved the full text to determine whether the study was an RCT and matched our inclusion criteria. Two authors independently extracted study data for each RCT and assessed them for risk of bias. We pooled risk ratios using a Mantel-Haenszel fixed effect model. Main results Twenty-seven RCTs were included. The interventions were very heterogeneous in the components of the family intervention, the other risk behaviours targeted alongside tobacco, the age of children at baseline and the length of follow-up. Two interventions were tested by two RCTs, one was tested by three RCTs and the remaining 20 distinct interventions were tested only by one RCT. Twenty-three interventions were tested in the USA, two in Europe, one in Australia and one in India. The control conditions fell into two main groups: no intervention or usual care; or school-based interventions provided to all participants. These two groups of studies were considered separately. Most studies had a judgement of 'unclear' for at least one risk of bias criteria, so the quality of evidence was downgraded to moderate. Although there was heterogeneity between studies there was little evidence of statistical heterogeneity in the results. We were unable to extract data from all studies in a format that allowed inclusion in a meta-analysis. There was moderate quality evidence family-based interventions had a positive impact on preventing smoking when compared to a no intervention control. Nine studies (4810 participants) reporting smoking uptake amongst baseline non-smokers could be pooled, but eight studies with about 5000 participants could not be pooled because of insufficient data. The pooled estimate detected a significant reduction in smoking behaviour in the intervention arms (risk ratio [RR] 0.76, 95% confidence interval [CI] 0.68 to 0.84). Most of these studies used intensive interventions. Estimates for the medium and low intensity subgroups were similar but confidence intervals were wide. Two studies in which some of the 4487 participants already had smoking experience at baseline did not detect evidence of effect (RR 1.04, 95% CI 0.93 to 1.17). Eight RCTs compared a combined family plus school intervention to a school intervention only. Of the three studies with data, two RCTS with outcomes for 2301 baseline never smokers detected evidence of an effect (RR 0.85, 95% CI 0.75 to 0.96) and one study with data for 1096 participants not restricted to never users at baseline also detected a benefit (RR 0.60, 95% CI 0.38 to 0.94). The other five studies with about 18,500 participants did not report data in a format allowing meta-analysis. One RCT also compared a family intervention to a school 'good behaviour' intervention and did not detect a difference between the two types of programme (RR 1.05, 95% CI 0.80 to 1.38, n = 388). No studies identified any adverse effects of intervention. Authors' conclusions There is moderate quality evidence to suggest that family-based interventions can have a positive effect on preventing children and adolescents from starting to smoke. There were more studies of high intensity programmes compared to a control group receiving no intervention, than there were for other compairsons. The evidence is therefore strongest for high intensity programmes used independently of school interventions. Programmes typically addressed family functioning, and were introduced when children were between 11 and 14 years old. Based on this moderate quality evidence a family intervention might reduce uptake or experimentation with smoking by between 16 and 32%. However, these findings should be interpreted cautiously because effect estimates could not include data from all studies. Our interpretation is that the common feature of the effective high intensity interventions was encouraging authoritative parenting (which is usually defined as showing strong interest in and care for the adolescent, often with rule setting). This is different from authoritarian parenting (do as I say) or neglectful or unsupervised parenting.

The protective mechanisms of first aid training within a school-based program for early adolescents

This thesis was concerned with the protective mechanisms of first aid training in the context of peer support. Using a randomised control trial design the current program of research explores first aid training in the school setting and identifies the key components of effective school-based first aid training programs. In particular, examining whether first aid training and associated knowledge could be protective for early adolescents. This broader framing considered whether first aid impacted on increasing behaviour and attitudes towards helping an injured friend, and reducing personal risk taking and related injury.

Behaviour of LSF floor systems with improved joist sections under fire conditions

Fire safety design of buildings is essential to safeguard lives and minimize the loss of damage to properties. Light-weight cold-formed steel channel sections along with fire resistive plasterboards are used to construct light gauge steel frame floor systems to provide the required fire resistance rating. However, simply adding more plasterboard layers is not an efficient method to increase FRR. Hence this research focuses on using joists with improved joist section profiles such as hollow flange sections to increase the structural capacity of floor systems under fire conditions and thus their FRR. In this research, the structural and thermal behaviour of LSF floor systems made of LiteSteel Beams with different plasterboard and insulation configurations was investigated using four full scale tests under standard fires. Based on the ultimate failure load of the floor joist at ambient temperature, transient state fire tests were conducted for different Load Ratios. These fire tests showed that the new LSF floor system has improved the FRR well above that of those made of lipped channel sections. The joist failure was predominantly due to local buckling of LSB compression flanges near mid-span with severe yielding of tension flanges. Fire tests have provided valuable structural and thermal performance data of tested floor systems that included time-temperature profiles, and failure times and temperatures. Average failure temperatures of LSB joists and reduced yield strengths were used to predict their ultimate moment capacities, which were compared with corresponding test capacities. This allowed an assessment in relation to the accuracy of current design rules for steel joists at elevated temperatures. This paper presents the details of full scale fire tests of LSF floor systems made of LSB joists with different plasterboard and insulation configurations and their results along with some important findings.

Submission for the Queensland Government Parliamentary Inquiry into personal health promotion interventions using telephone and web-based technologies

Telephone and web-based technologies such as SMS, smartphone apps, gamification, online/mobile games, online quizzes and tools can be used in personal health interventions in two ways: health promotion or social marketing. In response to the Queensland government's call for submissions to the parliamentary inquiry, a social marketing and design submission from four of the faculties at Queensland University of Technology was submitted. There appears to be a great deal of confusion in government circles about the terms ‘social marketing’ and ‘health promotion’ and often they are used interchangeably when they are actually significantly different approaches. Social marketing is the science and practice of behaviour change and involves goods and services that offer a value proposition, and which incentivises citizens to change their behaviour voluntarily. However, social marketing is often mistakenly used to describe advertising and communication or social media marketing. This submission contains an overview of how technology interventions need to be implemented to be successful, provides examples of the evidence that telephone and web-based interventions can effectively influence public health outcome. This submission poses seven critical factors.