Generalized-positioning for mixed-frequency of mixed-GNSS and its preliminary applications

Modernized GPS and GLONASS, together with new GNSS systems, BeiDou and Galileo, offer code and phase ranging signals in three or more carriers. Traditionally, dual-frequency code and/or phase GPS measurements are linearly combined to eliminate effects of ionosphere delays in various positioning and analysis. This typical treatment method has imitations in processing signals at three or more frequencies from more than one system and can be hardly adapted itself to cope with the booming of various receivers with a broad variety of singles. In this contribution, a generalized-positioning model that the navigation system independent and the carrier number unrelated is promoted, which is suitable for both single- and multi-sites data processing. For the synchronization of different signals, uncalibrated signal delays (USD) are more generally defined to compensate the signal specific offsets in code and phase signals respectively. In addition, the ionospheric delays are included in the parameterization with an elaborate consideration. Based on the analysis of the algebraic structures, this generalized-positioning model is further refined with a set of proper constrains to regularize the datum deficiency of the observation equation system. With this new model, uncalibrated signal delays (USD) and ionospheric delays are derived for both GPS and BeiDou with a large dada set. Numerical results demonstrate that, with a limited number of stations, the uncalibrated code delays (UCD) are determinate to a precision of about 0.1 ns for GPS and 0.4 ns for BeiDou signals, while the uncalibrated phase delays (UPD) for L1 and L2 are generated with 37 stations evenly distributed in China for GPS with a consistency of about 0.3 cycle. Extra experiments concerning the performance of this novel model in point positioning with mixed-frequencies of mixed-constellations is analyzed, in which the USD parameters are fixed with our generated values. The results are evaluated in terms of both positioning accuracy and convergence time.

Parliamentary committee reviews of police oversight agencies : a Queensland case study

The suggested model of an ideal public sector corruption commission includes oversight by a parliamentary committee with an attached parliamentary inspector (Prenzler, 2009). However, little research has been conducted on parliamentary oversight of corruption commissions. In Queensland, a role of the Parliamentary Crime and Misconduct Committee, which has the Parliamentary Crime and Misconduct Commissioner attached, is to review the Crime and Misconduct Commission every three years. This paper considers the public written and oral submissions made to the Parliamentary Crime and Misconduct Committee in the four reviews of the Crime and Misconduct Committee conducted to date (2004, 2006, 2009 and 2012). By doing this, the paper will begin to identify the gaps in our understanding of the relationship between parliamentary committees and public sector corruption commissions and the processes used by parliamentary committees to provide oversight of corruption commissions.

Integrating Poverty and Gender into Health Programmes : a Source Book for Health Professionals : Module on Curricular Integration

Over the past two to three decades, our understanding of poverty has broadened from a narrow focus on income and consumption to a multidimensional notion of education, health, social and political 1 participation, personal security and freedom and environmental quality. Thus, it encompasses not just low income, but lack of access to services, resources and skills; vulnerability; insecurity; and voicelessness and powerlessness. Multidimensional poverty is a determinant of health risks, health seeking behaviour, health care access and health outcomes. As analysis of health outcomes becomes more refined, it is increasingly apparent that the impressive gains in health experienced over recent decades are unevenly distributed. Aggregate indicators, whether at the global, regional or national level, often tend to mask striking variations in health outcomes between men and women, rich and poor, both across and within countries...

Multi-wall carbon nanotube coating of fluorine-doped tin oxide as an electrode surface modifier for polymer solar cells

A controlled layer of multi-wall carbon nanotubes (MWCNT) was grown directly on top of fluorine-doped tin oxide (FTO) glass electrodes as a surface modifier for improving the performance of polymer solar cells. By using low-temperature chemical vapor deposition with short synthesis times, very short MWCNTs were grown, these uniformly decorating the FTO surface. The chemical vapor deposition parameters were carefully refined to balance the tube size and density, while minimizing the decrease in conductivity and light harvesting of the electrode. As created FTO/CNT electrodes were applied to bulk-heterojunction polymer solar cells, both in direct and inverted architecture. Thanks to the inclusion of MWCNT and the consequent nano-structuring of the electrode surface, we observe an increase in external quantum efficiency in the wavelength range from 550 to 650 nm. Overall, polymer solar cells realized with these FTO/CNT electrodes attain power conversion efficiency higher than 2%, outclassing reference cells based on standard FTO electrodes.

Electrocrystallization of phase I, CuTCNQ (TCNQ= 7, 7, 8, 8-tetracyanoquinodimethane), on indium tin oxide and boron-doped diamond electrodes

The electrochemical reduction of TCNQ to TCNQ•- in acetonitrile in the presence of [Cu(MeCN)4]+ has been undertaken at boron-doped diamond (BDD) and indium tin oxide (ITO) electrodes. The nucleation and growth process at BDD is similar to that reported previously at metal electrodes. At an ITO electrode, the electrocrystallization of more strongly adhered, larger, branched, needle-shaped phase I CuTCNQ crystals is detected under potential step conditions and also when the potential is cycled over the potential range of 0.7 to −0.1 V versus Ag/AgCl (3 M KCl). Video imaging can be used at optically transparent ITO electrodes to monitor the growth stage of the very large branched crystals formed during the course of electrochemical experiments. Both in situ video imaging and ex situ X-ray diffraction and scanning electron microscopy (SEM) data are consistent with the nucleation of CuTCNQ taking place at a discrete number of preferred sites on the ITO surface. At BDD electrodes, ex situ optical images show that the preferential growth of CuTCNQ occurs at the more highly conducting boron-rich areas of the electrode, within which there are preferred sites for CuTCNQ formation.

Effect of the mediator in feedback mode-based SECM interrogation of indium tin-oxide and boron-doped diamond electrodes

Indium tin-oxide (ITO) and polycrystalline boron-doped diamond (BDD) have been examined in detail using the scanning electrochemical microscopy technique in feedback mode. For the interrogation of electrodes made from these materials, the choice of mediator has been varied. Using Ru(CN) 4− 6 (aq), ferrocene methanol (FcMeOH), Fe(CN) 3− 6 (aq) and Ru(NH 3) 3+ 6 (aq), approach curve experiments have been performed, and for purposes of comparison, calculations of the apparent heterogeneous electron transfer rates (k app) have been made using these data. In general, it would appear that values of k app are affected mainly by the position of the mediator reversible potential relative to the relevant semiconductor band edge (associated with majority carriers). For both the ITO (n type) and BDD (p type) electrodes, charge transfer is impeded and values are very low when using FcMeOH and Fe(CN) 3− 6 (aq) as mediators, and the use of Ru(NH 3) 3+ 6(aq) results in the largest value of k app. With ITO, the surface is chemically homogeneous and no variation is observed for any given mediator. Data is also presented where the potential of the ITO electrode is fixed using a ratio of the mediators Fe(CN) 3− 6(aq) and Fe(CN) 4− 6(aq). In stark contrast, the BDD electrode is quite the opposite and a range of k app values are observed for all mediators depending on the position on the surface. Both electrode surfaces are very flat and very smooth, and hence, for BDD, variations in feedback current imply a variation in the electrochemical activity. A comparison of the feedback current where the substrate is biased and unbiased shows a surprising degree of proportionality.

Investigation of mediated oxidation of ascorbic acid by ferrocenemethanol using large-amplitude fourier transformed ac voltammetry under quasi-reversible electron-transfer conditions at an indium tin oxide electrode

The ability of the technique of large-amplitude Fourier transformed (FT) ac voltammetry to facilitate the quantitative evaluation of electrode processes involving electron transfer and catalytically coupled chemical reactions has been evaluated. Predictions derived on the basis of detailed simulations imply that the rate of electron transfer is crucial, as confirmed by studies on the ferrocenemethanol (FcMeOH)-mediated electrocatalytic oxidation of ascorbic acid. Thus, at glassy carbon, gold, and boron-doped diamond electrodes, the introduction of the coupled electrocatalytic reaction, while producing significantly enhanced dc currents, does not affect the ac harmonics. This outcome is as expected if the FcMeOH (0/+) process remains fully reversible in the presence of ascorbic acid. In contrast, the ac harmonic components available from FT-ac voltammetry are predicted to be highly sensitive to the homogeneous kinetics when an electrocatalytic reaction is coupled to a quasi-reversible electron-transfer process. The required quasi-reversible scenario is available at an indium tin oxide electrode. Consequently, reversible potential, heterogeneous charge-transfer rate constant, and charge-transfer coefficient values of 0.19 V vs Ag/AgCl, 0.006 cm s (-1) and 0.55, respectively, along with a second-order homogeneous chemical rate constant of 2500 M (-1) s (-1) for the rate-determining step in the catalytic reaction were determined by comparison of simulated responses and experimental voltammograms derived from the dc and first to fourth ac harmonic components generated at an indium tin oxide electrode. The theoretical concepts derived for large-amplitude FT ac voltammetry are believed to be applicable to a wide range of important solution-based mediated electrocatalytic reactions.

Review: "Breast cancer : can you prevent it?" by A. Lawson, J. Lawson. McGraw-Hill Book (1998)

While reviewing this book, I was not of the target audience. For example, there is a first chapter (presented as a case study, and integrated in an unconvincing manner into the remainder of the book) that obviously meant to soften the book for the lay person. In the third chapter, the authors provide their philosophical interpretation on the meaning of breasts for reasons that entirely escape me, and that have no relation to the book as a whole. Finally, there are potted histories of the heroics of ‘tireless’, ‘dedicated’ and ‘earnest’ epidemiologists, some of whom have nothing to do with breast cancer or the book at all. Despite this lack of focus, the authors give an honest and coherent account of the current state of breast cancer research from an epidemiological viewpoint...

Editors' introduction : literacy, learning & culture

We come together as editors to prepare an introduction to this international volume at a time of economic turbulence, new uncertainties about the future, and a growing demand on the part of most governments for further alignment of education with the economy. Literacy, in particular, is in the vanguard, for literacy only too frequently is positioned as a proxy for education. What are the purposes of literacy teaching and how is it to be achieved? What counts as literacy in ‘new times,’ in ‘participatory culture’ where people ‘believe their contributions matter, and feel some degree of social connection with one another’ (Abrams and Merchant, Chapter 23)? How can everyone be included as critical citizens of the world in whatever definition of literacy we endorse? What fresh perspectives, new ways of thinking, and good ideas for the understanding of literacy are out there? What are the possibilities for the future? An exploration of these kinds of questions and their answers, however tentative, provides us, we believe, with our best defense against the uncertainties of our age. In some respects this is our overall purpose in the volume, to explore our understanding and future possibilities by bringing together critical reviews of the major theories, methods, and pedagogical advances that have taken place in the past 20 years in the field of literacy research at the primary/elementary school level. Each chapter in the volume is newly written for the Handbook while overall the book is intended to be a distillation of key thinking and theory which offers new directions for research in literacy. It aims to revisit current interpretations, make novel connections, frame new possibilities, and encourage researchers to pursue innovative and compelling lines of inquiry...

Legal Reasoning in Environmental Law : a Study of Structure, Form and Language

This book analyses the structure, form and language of a selected number of international and national legal instruments and reviews how an illustrative range of international and national judicial institutions have responded to the issues before them and the processes of legal reasoning engaged by them in reaching their decisions. This involves a very detailed discussion of these primary sources of international and national environmental law with a view to determining their jurisprudential architecture and the processes of reasoning expected of those responsible for implementing these architectural arrangements. This book is concerned not with the effectiveness or the quality of an environmental legal system but only with its jurisprudential characteristics and their associated processes of legal reasoning.

The primary school as a logic machine

This paper makes a case for thinking about the primary school as a logic machine (apparatus) as a way of thinking about processes of in-school stratification. Firstly we discuss related literature on in-school stratification in primary schools, particularly as it relates to literacy learning. Secondly we explain how school reform can be thought about in terms of the idea of the machine or apparatus. In which case the processes of in-school stratification can be mapped as more than simply concerns about school organisation (such as students grouping) but also involve a politics of truth, played out in each school, that constitutes school culture and what counts as ‘good’ pedagogy. Thirdly, the chapter will focus specifically on research conducted into primary schools in the Northern Suburbs of Adelaide, one of the most educationally disadvantaged regions in Australia, as a case study of the relationship between in-school stratification and the reproduction of inequality. We will draw from more than 20 years of ethnographic work in primary school in the northern suburbs of Adelaide and provide a snapshot of a recent attempt to improve literacy achievement in a few Northern Suburbs public primary schools (SILA project). The SILA project, through diagnostic reviews, has provided a significant analysis of the challenges facing policy and practice in such challenging school contexts that also maps onto existing (inter)national research. These diagnostic reviews said ‘hard things’ that required attention by SILA schools and these included: · an over reliance on whole class, low level, routine tasks and hence a lack of challenge and rigour in the learning tasks offered to students ; · a focus on the 'code breaking' function of language at the expense of richer conceptualisations of literacy that might guide teachers’ understanding of challenging pedagogies ; · the need for substantial shifts in the culture of schools, especially unsettling deficit views of students and their communities ; · a need to provide a more ‘consistent’ approach to teaching literacy across the school; · a need to focus School Improvement Plans in order to implement a clear focus on literacy learning; and, · a need to sustain professional learning to produce new knowledge and practice . The paper will conclude with suggestions for further research and possible reform projects into the primary school as a logic machine.