Co-optimisation of indoor environmental quality and energy consumption within urban office buildings

This study aimed to develop a multi-component model that can be used to maximise indoor environmental quality inside mechanically ventilated office buildings, while minimising energy usage. The integrated model, which was developed and validated from fieldwork data, was employed to assess the potential improvement of indoor air quality and energy saving under different ventilation conditions in typical air-conditioned office buildings in the subtropical city of Brisbane, Australia. When operating the ventilation system under predicted optimal conditions of indoor environmental quality and energy conservation and using outdoor air filtration, average indoor particle number (PN) concentration decreased by as much as 77%, while indoor CO2 concentration and energy consumption were not significantly different compared to the normal summer time operating conditions. Benefits of operating the system with this algorithm were most pronounced during the Brisbane’s mild winter. In terms of indoor air quality, average indoor PN and CO2 concentrations decreased by 48% and 24%, respectively, while potential energy savings due to free cooling went as high as 108% of the normal winter time operating conditions. The application of such a model to the operation of ventilation systems can help to significantly improve indoor air quality and energy conservation in air-conditioned office buildings.

Are you on board? The role of design-led innovation in strengthening key partnerships within an Australian airport

A popular lexicon for announcing partnerships within aviation is being ‘on-board’. Like boarding a plane, business partnerships requires trust in the expertise and the philosophy of another organisation. This paper reports upon the process and findings from the completion of a customer engagement project within a leading Australian Airport, as part of the wider uptake of design-led innovation. The project was completed bilaterally with Airport Corporation and prominent retail business partner undertaking a design-led approach to collaboratively explore an observed market trend affecting the performance of both businesses. A design-led catalyst facilitated the completion of this project, working within the Airport Corporation to disseminate the skills and philosophy of design over an 18 month period using an action research method. Findings reveal that the working environment necessary for design to be utilised requires; trust in the design-led approach as a new and exploratory way of completing work; leadership within the execution and delivery of project deliverables, and; a shared intrinsic motivation to develop new skills through a design-led approach which challenges a business-as-usual mentality (BAU). Design-led innovation can be deployed specifically to strengthen business partnerships through collaborative and explorative customer engagement.

Applying design-led innovation in a not-for-profit aged care provider to create shared value

This study examines the role of Design-Led Innovation in creating shared value; sustainable competitive advantage for an organisation and social value for the communities in which it operates. A case study analysed an undertaking by a not-for-profit aged care organisation to create a sustainable competitive advantage in the market by reinventing the experience of ageing and defining an innovative future business model. This paper reflects on the role of Design-Led Innovation in facilitating this change agenda and explores the particular relevance of the associated techniques in a not-for-profit, human services context. It was found that the Design-Led Innovation approach was effective in achieving the goal of defining a way for the organisation to create shared value.

Ultrafine Particles from Traffic Emissions and Children’s Health (UPTECH) in Brisbane, Queensland (Australia): Study design and implementation

Ultrafine particles are particles that are less than 0.1 micrometres (µm) in diameter. Due to their very small size they can penetrate deep into the lungs, and potentially cause more damage than larger particles. The Ultrafine Particles from Traffic Emissions and Children’s Health (UPTECH) study is the first Australian epidemiological study to assess the health effects of ultrafine particles on children’s health in general and peripheral airways in particular. The study is being conducted in Brisbane, Australia. Continuous indoor and outdoor air pollution monitoring was conducted within each of the twenty five participating school campuses to measure particulate matter, including in the ultrafine size range, and gases. Respiratory health effects were evaluated by conducting the following tests on participating children at each school: spirometry, forced oscillation technique (FOT) and multiple breath nitrogen washout test (MBNW) (to assess airway function), fraction of exhaled nitric oxide (FeNO, to assess airway inflammation), blood cotinine levels (to assess exposure to second-hand tobacco smoke), and serum C-reactive protein (CRP) levels (to measure systemic inflammation). A pilot study was conducted prior to commencing the main study to assess the feasibility and reliably of measurement of some of the clinical tests that have been proposed for the main study. Air pollutant exposure measurements were not included in the pilot study.

A method for optimal fit of patient-specific fracture fixation plates

Anatomically pre-contoured fracture fixation plates are a treatment option for bone fractures. A well-fitting plate can be used as a tool for anatomical reduction of the fractured bone. However, recent studies showed that some plates fit poorly for many patients due to considerable shape variations between bones of the same anatomical site. Therefore, the plates have to be manually fitted and deformed by surgeons to fit each patient optimally. The process is time-intensive and labor-intensive, and could lead to adverse clinical implications such as wound infection or plate failure. This paper proposes a new iterative method to simulate the patient-specific deformation of an optimally fitting plate for pre-operative planning purposes. We further demonstrate the validation of the method through a case study. The proposed method involves the integration of four commercially available software tools, Matlab, Rapidform2006, SolidWorks, and ANSYS, each performing specific tasks to obtain a plate shape that fits optimally for an individual tibia and is mechanically safe. A typical challenge when crossing multiple platforms is to ensure correct data transfer. We present an example of the implementation of the proposed method to demonstrate successful data transfer between the four platforms and the feasibility of the method.

Studying industrial design : Exploring the experience of female students

Despite a significant increase in the number of women enrolling and graduating from design courses, the reality is that women remain ‘invisible’ in the design profession (Bruce, 1985). Over two decades ago, Bruce and Lewis (1990) argued that women were less likely than men to be designers due to three key gendered hurdles: the completion of a design degree, getting a design job and obtaining success in a design job. This paper focuses specifically on Australian women’s experience of hurdle one: the completion of a design degree, utilising industrial design as a case study. Semi-structured interview questions (exploring issues such as experience in class and the workshop, accessibility of the course and content, types of projects etc) were recorded and transcribed verbatim, with a thematic analysis conducted to better understand women’s experiences in completing their industrial design degree. This paper focuses on one key theme “navigating the design studio”, which comprises of three sub-themes: design skill development, the workshop experience and course evaluation. These findings highlight the need to understand the educational experience to ensure female designers remain motivated and eventually employable.

Modular design of profluorescent polymer sensors

A simple modular strategy for the synthesis of profluorescent nitroxide containing polymers is described. The incorporation of an epoxide as a pendant functionality on a polymer backbone synthesized using ATRP and subsequent nucleophilic ring-opening with sodium azide gave hydroxyl and azide functionality within a 3-bond radius. Orthogonal coupling chemistry then allowed the independent attachment of fluorophore and nitroxide groups in close proximity, giving rise to a profluorescent polymer. Validation of the viability of these materials as fluorescent sensors is demonstrated through efficient fluorescence switch-on observed when the materials are exposed to a model reductant or carbon-centred radical source.

XD: Experience Design Magazine (Issue One)

XD: Experience Design Magazine is an interdisciplinary publication that focuses on the concept and practice of ‘experience design’, as a holistic concept separate from the well known concept of ‘user experience’. The magazine aims to present a mixture of interrelated perspectives from industry and academic researchers with practicing designers and managers. The informal, journalistic style of the publication aims to simultaneously provide a platform for researchers and other writers to promote their work in an applied way for global impact, and for industry designers to present practical perspectives to inspire a global research audience. Each issue will feature a series of projects, interviews, visuals, reviews and creative inspiration – all of which help everyone understand why experience design is important, who does it and where, how experience design is done in practice and how experience design research can enhance practice. Contents Issue 1 Miller, F. Developing Principles for Designing Optimal Experiences Lavallee, P. Design for Emotions Khan, H. The Entropii XD Framework Bowe, M. & Silvers, A. First Steps in Experience Design Leaper, N. Learning by Design Forrest, R. & Roberts, T. Interpretive Design: Think, Do, Feel Tavakkoli, P. Working Hard at Play Stow, C. Designing Engaging Learning Experiences Wood, M. Enhance Your Travel Experience Using Apps Miller, F. Humanizing It Wood, M. Designing the White Night Experience Newberry, P. & Farnham, K. Experience Design Book Excerpt

Cord blood vitamin D and neurocognitive development are nonlinearly related in toddlers

Background Little is known about the relation between vitamin D status in early life and neurodevelopment outcomes. Objective This study was designed to examine the association of cord blood 25-hydroxyvitamin D [25(OH)D] at birth with neurocognitive development in toddlers. Methods As part of the China-Anhui Birth Cohort Study, 363 mother-infant pairs with completed data were selected. Concentrations of 25(OH)D in cord blood were measured by radioimmunoassay. Mental development index (MDI) and psychomotor development index (PDI) in toddlers were assessed at age 16–18 mo by using the Bayley Scales of Infant Development. The data on maternal sociodemographic characteristics and other confounding factors were also prospectively collected. Results Toddlers in the lowest quintile of cord blood 25(OH)D exhibited a deficit of 7.60 (95% CI: −12.4, −2.82; P = 0.002) and 8.04 (95% CI: −12.9, −3.11; P = 0.001) points in the MDI and PDI scores, respectively, compared with the reference category. Unexpectedly, toddlers in the highest quintile of cord blood 25(OH)D also had a significant deficit of 12.3 (95% CI: −17.9, −6.67; P < 0.001) points in PDI scores compared with the reference category. Conclusions This prospective study suggested that there was an inverted-U–shaped relation between neonatal vitamin D status and neurocognitive development in toddlers. Additional studies on the optimal 25(OH)D concentrations in early life are needed.

Design intersection: The growth of community-led technology enabled companies

The sharing economy or collaborative consumption based firms have the potential to disrupt long-standing traditional industries. However, little is known on the topic, specifically the role of design in these successful community-led, technology enable firms. It is the proposition of this research that the intrinsic innovation of collaborative consumption firms is not merely a technological one. With successful firms being identified by being able to marry both technological advancement and human insight on product meaning. Therefore, the authors suggest the use of design as an effective way to capitalise and build on product meaning, not only technological advancements in order to foster the growth of a community. To explore this further, the research team decided to investigate two fast growing examples of industry disrupting, sharing economy businesses; Airbnb and Uber. Of the two cases, the use of design was found to be more evident within, Airbnb, due to wide profession of using design techniques. Each case study has been mapped on Guenther’s (2012) framework of techno-economic innovation to help illustrate this marriage of innovation agendas. This paper explored the role of design in community-led companies by presenting an argument for why they have succeeded due to an understanding of human need and key market trends, instead of only technological innovation alone. Findings and implication of these case studies suggest the future role of design as a method to achieve this success. Built on the core tenants of design thinking, these techniques rationalise technology, human needs and business viability to product innovative solutions. Upon these findings, the research team has created a new framework for understanding community-led technology enabled companies, one that builds upon the work of Guenther’s (2012) model of enterprise design innovation. This paper is the first step in a new research agenda.

Is comfort important for optimal use of child restraints?

Suboptimal restraint use, particularly the incorrect use of restraints, is a significant and widespread problem among child vehicle occupants, and increases the risk of injury. Previous research has identified comfort as a potential factor influencing suboptimal restraint use. Both the real comfort experienced by the child and the parent’s perception of the child’s comfort are reported to influence the optimal use of restraints. Problems with real comfort may lead the child to misuse the restraint in their attempt to achieve better comfort whilst parent-perceived discomfort has been reported as a driver for premature graduation and inappropriate restraint choice. However, this work has largely been qualitative. There has been no research that objectively studies either the association between real and parental perceived comfort, or any association between comfort and suboptimal restraint use. One barrier to such studies is the absence of validated tools for quantifying real comfort in children. We aimed to develop methods to examine both real and parent-perceived comfort and examine their effects on suboptimal restraint use. We conducted online parent surveys (n=470) to explore what drives parental perceptions of their child’s comfort in restraint systems (study 1) and used data from field observation studies (n=497) to examine parent-perceived comfort and its relationship with observed restraint use (study 2). We developed methods to measure comfort in children in a laboratory setting (n=14) using video analysis to estimate a Discomfort Avoidance Behaviour (DAB) score, pressure mapping and adapted survey tools to differentiate between comfortable and induced discomfort conditions (study 3). Preliminary analysis of our recent online survey of Australian parents (study 1) indicates that 23% of parents report comfort as a consideration when making a decision to change restraints. Logistic regression modelling of data collected during the field observation study (study 2) revealed that parent-perceived discomfort was not significantly associated with premature graduation. Contrary to expectation, children of parents who reported that their child was comfortable were almost twice as likely to have been incorrectly restrained (p<0.01, 95% CI 1.24 - 2.77). In the laboratory study (study 3) we found our adapted survey tools did not provide a reliable measurement of real comfort among children. However our DAB score was able to differentiate between comfortable and induced discomfort conditions and correlated well with pressure mapping. Our results suggest that while some parents report concern about their child’s comfort, parent-reported comfort levels were not associated with restraint choice. If comfort is important for optimal restraint use, it is likely to be the real comfort of the child rather than that reported by the parent. The method we have developed for studying real comfort can be used in naturalistic studies involving child occupants to further understand this relationship. This work will be of interest to vehicle and child restraint manufacturers interested in improving restraint design for young occupants as well as researchers and other stakeholders interested in reducing the incidence of restraint misuse among children.

Application of fragment-based screening to the design of inhibitors of Escherichia coli DsbA

The thiol-disulfide oxidoreductase enzyme DsbA catalyzes the formation of disulfide bonds in the periplasm of Gram-negative bacteria. DsbA substrates include proteins involved in bacterial virulence. In the absence of DsbA, many of these proteins do not fold correctly, which renders the bacteria avirulent. Thus DsbA is a critical mediator of virulence and inhibitors may act as antivirulence agents. Biophysical screening has been employed to identify fragments that bind to DsbA from Escherichia coli. Elaboration of one of these fragments produced compounds that inhibit DsbA activity in vitro. In cell-based assays, the compounds inhibit bacterial motility, but have no effect on growth in liquid culture, which is consistent with selective inhibition of DsbA. Crystal structures of inhibitors bound to DsbA indicate that they bind adjacent to the active site. Together, the data suggest that DsbA may be amenable to the development of novel antibacterial compounds that act by inhibiting bacterial virulence.

Teaching engineering tribology: Elements of assessment design for different learning styles

This study involves teaching engineering students concepts in lubrication engineering that are heavily dependent on mathematics. Excellent learning outcomes have been observed when assessment tasks are devised for a diversity of learning styles. Providing different pathways to knowledge reduces the probability that a single barrier halts progress towards the ultimate learning objective. The interdisciplinary nature of tribology can be used advantageously to tie together multiple elements of engineering to solve real physical problems—an approach that seems to benefit a majority of engineering students. To put this into practice, various assessment items were devised on the study of hydrodynamics, culminating in a project to provide a summative evaluation of the students’ learning achievement. A survey was also conducted to assess other aspects of students’ learning experiences under the headings: ‘perception of learning’ and ‘overall satisfaction’. High degrees of achievement and satisfaction were observed. An attempt has been made to identify the elements contributing to success so that they may be applied to other challenging concepts in engineering education.

Cultural factors: Understanding culture to design organisation structures and systems to optimise safety

Safety culture is a term with numerous definitions in the literature. Many authors advocate a prescriptive approach to safety culture in which if an organisation has certain levels of externally prescribed systems and structures in place it has a “good safety culture”. Conversely, other researchers suggest an anthropological approach of exploring deep meanings and understandings present within an organisation’s workforce. In a recent published review, the authors presented an alternative view to safety culture, in which the anthropological aspects of safety culture interact with the structures and systems in place within an organisation to result in behavioural patterns. This can be viewed as a human factors approach to safety culture in which, through understanding the specific interactions between the culture of a workforce and external organisational elements, organisational structures and systems can be optimised in order to shape worker behaviour and improve safety. This paper presents findings from a recent investigation of safety culture in the Australian heavy vehicle (transport) industry. Selected results are discussed to explore how understanding culture can provide direction to the optimisation of organisational structures and systems to match worker culture and thus improve safety. Specifically the value placed on personal experience and stories, as well as on both time and money are discussed, and interventions that are suited to these aspects of the culture are discussed. These findings demonstrate the importance of shifting beyond mere prescriptive and interpretive approaches to safety culture and instead to focus on the interaction between cultural and contextual elements to optimise organisational structures and systems.

Design and fabrication of linear pixel arrays for organic photovoltaic modules to achieve scalable power output

We describe a design and fabrication method to enable simpler manufacturing of more efficient organic solar cell modules using a modified flat panel deposition technique. Many mini-cell pixels are individually connected to each other in parallel forming a macro-scale solar cell array. The pixel size of each array is optimized through experimentation to maximize the efficiency of the whole array. We demonstrate that integrated organic solar cell modules with a scalable current output can be fabricated in this fashion and can also be connected in series to generate a scalable voltage output.