226 resultados para Commons good
Resumo:
Aim: To explore the role and needs of the family carer across different acute care contexts and their level of involvement in the care of their relative with dementia in this setting. Method: A pragmatic, exploratory-descriptive qualitative approach. A convenience sample of 30 family carers across three sites completed semi-structured interviews. Results: Family carers wanted to be involved in the acute care of their family member with dementia. They acknowledged the importance of a central source of information, educated staff, guidelines on roles and processes, and positive communication, as well as respect from staff for the carer’s knowledge of the older person and their needs. They also highlighted the need for medical staff to discuss with them the family member’s treatment and care. Conclusion: There is a need for family-focused interventions to improve communication and involvement of family in the care of family members with dementia in the acute setting.
Resumo:
The prospect of widespread displacement in the Pacific as a result of climate change is becoming increasingly likely and it is possible that many will eventually need to relocate to other countries. Regional migration strategies not only offer the potential to minimise the harms of relocation, while acknowledging existing relationships of friendship and regional cooperation. This article examines the use of the language of ‘neighbourliness’ in Australia’s regional climate change strategies and argues that, while it expresses friendship, such language can also be employed to avoid the creation of stronger obligations. The article considers the international doctrine of good neighbourliness and concludes that, while international legal obligations may not yet exist, Australia should nonetheless begin planning for regional migration within the Pacific to allow people to migrate with dignity.
Resumo:
This thesis presents a case study of value creation in the social media based brand communities of two Australian cause organisations. It improves understanding of how value is created in this increasingly important environment by examining participants' posts and practices, organisational strategies and supporters' perceptions of value creation. The thesis shows that while value creation is complex, value is generated for supporters and organisations alike, and positively influences the outcomes for recipients of the vital services provided by the cause organisations. Value creation in this context thus manifests social good for supporters, service recipients and society at large.
Resumo:
At the 2014 G20 held in Brisbane, Australia took the position that climate change is not an economic issue. Most others thought it was - especially the Turkish Prime Minister who is hosting the 2015 G20. It is certainly an economic issue. But, it is not just an economic issue - either in the source or the solution.
Resumo:
Sustainable implementation of new workforce redesign initiatives requires strategies that minimize barriers and optimize supports. Such strategies could be provided by a set of guiding principles. A broad understanding of the concerns of all the key stakeholder groups is required before effective strategies and initiatives are developed. Many new workforce redesign initiatives are not underpinned by prior planning, and this threatens their uptake and sustainability. This study reports on a cross-sectional qualitative study that sought the perspectives of representatives of key stakeholders in a new workforce redesign initiative (extended-scope-of-practice physiotherapy) in one Australian tertiary hospital. The key stakeholder groups were those that had been involved in some way in the development, management, training, funding, and/or delivery of the initiative. Data were collected using semistructured questions, answered individually by interview or in writing. Responses were themed collaboratively, using descriptive analysis. Key identified themes comprised: the importance of service marketing; proactively addressing barriers; using readily understood nomenclature; demonstrating service quality and safety, monitoring adverse events, measuring health and cost outcomes; legislative issues; registration; promoting viable career pathways; developing, accrediting, and delivering a curriculum supporting physiotherapists to work outside of the usual scope; and progression from "a good idea" to established service. Health care facilities planning to implement new workforce initiatives that extend scope of usual practice should consider these issues before instigating workforce/model of care changes. © 2014 Morris et al.
Resumo:
Background Data describing the Australian allied health workforce is inadequate and so insufficient for workforce planning. National health policy reform requires that health-care models take into account future workforce requirements, the distribution and work contexts of existing practitioners, training needs, workforce roles and scope of practice. Good information on this workforce is essential for managing services as demands increase, accountability of practitioners, measurement of outcomes and benchmarking against other jurisdictions. A comprehensive data set is essential to underpin policy and planning to meet future health workforce needs. Discussion Some data on allied health professions is managed by the Australian Health Practitioner Regulation Agency; however, there is limited information regarding several core allied health professions. A global registration and accreditation scheme recognizing all allied health professions might provide safeguards and credibility for professionals and their clients. Summary Arguments are presented about inconsistencies and voids in the available information about allied health services. Remedying these information deficits is essential to underpin policy and planning for future health workforce needs. We make the case for a comprehensive national data set based on a broad and inclusive sampling process across the allied health population.
Resumo:
It has been noted elsewhere that an idea is acknowledged to be creative if it is novel, or surprising and adaptive. So how does that fit with education's desire to measure student performance against fixed, consistent and predicted learning outcomes? This study explores practical measures and theoretical constructs that address the dearth of teaching, learning and assessment strategies to enhance creative capacity in enterprise and entrepreneurship education. It is argued that inappropriate assessment strategies can be significant inhibitors of the creativity of students and teachers. Referring to the broader discipline of 'design', as defined by Bruce and Besant (2002) – the application of human creativity to a purpose – both broad employer satisfaction with education and fast growing economic success are found (DCMS, 2014). As predictable assessment outcomes equal predictable students, these understandings can inform educators who wish to map and develop enhanced creative endeavours such as opportunity recognition, communication and innovation.
Resumo:
We propose a new type of high-order elements that incorporates the mesh-free Galerkin formulations into the framework of finite element method. Traditional polynomial interpolation is replaced by mesh-free interpolations in the present high-order elements, and the strain smoothing technique is used for integration of the governing equations based on smoothing cells. The properties of high-order elements, which are influenced by the basis function of mesh-free interpolations and boundary nodes, are discussed through numerical examples. It can be found that the basis function has significant influence on the computational accuracy and upper-lower bounds of energy norm, when the strain smoothing technique retains the softening phenomenon. This new type of high-order elements shows good performance when quadratic basis functions are used in the mesh-free interpolations and present elements prove advantageous in adaptive mesh and nodes refinement schemes. Furthermore, it shows less sensitive to the quality of element because it uses the mesh-free interpolations and obeys the Weakened Weak (W2) formulation as introduced in [3, 5].
Resumo:
The National Energy Efficient Building Project (NEEBP) Phase One report, published in December 2014, investigated “process issues and systemic failures” in the administration of the energy performance requirements in the National Construction Code. It found that most stakeholders believed that under-compliance with these requirements is widespread across Australia, with similar issues being reported in all states and territories. The report found that many different factors were contributing to this outcome and, as a result, many recommendations were offered that together would be expected to remedy the systemic issues reported. To follow up on this Phase 1 report, three additional projects were commissioned as part of Phase 2 of the overall NEEBP project. This Report deals with the development and piloting of an Electronic Building Passport (EBP) tool – a project undertaken jointly by pitt&sherry and a team at the Queensland University of Technology (QUT) led by Dr Wendy Miller. The other Phase 2 projects cover audits of Class 1 buildings and issues relating to building alterations and additions. The passport concept aims to provide all stakeholders with (controlled) access to the key documentation and information that they need to verify the energy performance of buildings. This trial project deals with residential buildings but in principle could apply to any building type. Nine councils were recruited to help develop and test a pilot electronic building passport tool. The participation of these councils – across all states – enabled an assessment of the extent to which these councils are currently utilising documentation; to track the compliance of residential buildings with the energy performance requirements in the National Construction Code (NCC). Overall we found that none of the participating councils are currently compiling all of the energy performance-related documentation that would demonstrate code compliance. The key reasons for this include: a major lack of clarity on precisely what documentation should be collected; cost and budget pressures; low public/stakeholder demand for the documentation; and a pragmatic judgement that non-compliance with any regulated documentation requirements represents a relatively low risk for them. Some councils reported producing documentation, such as certificates of final completion, only on demand, for example. Only three of the nine council participants reported regularly conducting compliance assessments or audits utilising this documentation and/or inspections. Overall we formed the view that documentation and information tracking processes operating within the building standards and compliance system are not working to assure compliance with the Code’s energy performance requirements. In other words the Code, and its implementation under state and territory regulatory processes, is falling short as a ‘quality assurance’ system for consumers. As a result it is likely that the new housing stock is under-performing relative to policy expectations, consuming unnecessary amounts of energy, imposing unnecessarily high energy bills on occupants, and generating unnecessary greenhouse gas emissions. At the same time, Councils noted that the demand for documentation relating to building energy performance was low. All the participant councils in the EBP pilot agreed that documentation and information processes need to work more effectively if the potential regulatory and market drivers towards energy efficient homes are to be harnessed. These findings are fully consistent with the Phase 1 NEEBP report. It was also agreed that an EBP system could potentially play an important role in improving documentation and information processes. However, only one of the participant councils indicated that they might adopt such a system on a voluntary basis. The majority felt that such a system would only be taken up if it were: - A nationally agreed system, imposed as a mandatory requirement under state or national regulation; - Capable of being used by multiple parties including councils, private certifiers, building regulators, builders and energy assessors in particular; and - Fully integrated into their existing document management systems, or at least seamlessly compatible rather than a separate, unlinked tool. Further, we note that the value of an EBP in capturing statistical information relating to the energy performance of buildings would be much greater if an EBP were adopted on a nationally consistent basis. Councils were clear that a key impediment to the take up of an EBP system is that they are facing very considerable budget and staffing challenges. They report that they are often unable to meet all community demands from the resources available to them. Therefore they are unlikely to provide resources to support the roll out of an EBP system on a voluntary basis. Overall, we conclude from this pilot that the public good would be well served if the Australian, state and territory governments continued to develop and implement an Electronic Building Passport system in a cost-efficient and effective manner. This development should occur with detailed input from building regulators, the Australian Building Codes Board (ABCB), councils and private certifiers in the first instance. This report provides a suite of recommendations (Section 7.2) designed to advance the development and guide the implementation of a national EBP system.
Resumo:
Organochlorine pesticides (OCPs) are ubiquitous environmental contaminants with adverse impacts on aquatic biota, wildlife and human health even at low concentrations. However, conventional methods for their determination in river sediments are resource intensive. This paper presents an approach that is rapid and also reliable for the detection of OCPs. Accelerated Solvent Extraction (ASE) with in-cell silica gel clean-up followed by Triple Quadrupole Gas Chromatograph Mass Spectrometry (GCMS/MS) was used to recover OCPs from sediment samples. Variables such as temperature, solvent ratio, adsorbent mass and extraction cycle were evaluated and optimised for the extraction. With the exception of Aldrin, which was unaffected by any of the variables evaluated, the recovery of OCPs from sediment samples was largely influenced by solvent ratio and adsorbent mass and, to some extent, the number of cycles and temperature. The optimised conditions for OCPs extraction in sediment with good recoveries were determined to be 4 cycles, 4.5 g of silica gel, 105 ᴼC, and 4:3 v/v DCM: hexane mixture. With the exception of two compounds (α-BHC and Aldrin) whose recoveries were low (59.73 and 47.66 % respectively), the recovery of the other pesticides were in the range 85.35 – 117.97% with precision < 10 % RSD. The method developed significantly reduces sample preparation time, the amount of solvent used, matrix interference, and is highly sensitive and selective.
Resumo:
This article examines the nature of good and evil through the prism of Star Wars, arguing that the ostensible dichotomy between the ‘good’ Jedi and the ‘evil’ Sith is false, and instead both the Jedi and the Sith engage in violence, which is evil. Anakin Skywalker then arrives as the Christ-figure who becomes evil and ‘dies’ to destroy the old rigid law of the letter adhered to by the Jedi, before resurrecting and sacrificing himself to defeat the Sith transgressors. As Milbank argues, the act of selfless love by Anakin as the Christ-figure therefore produces the good, the end of violent conflict which is ontological peace, and institutes the law of love which leads to life and peace.
Resumo:
The paper considers the welfare effect of the harmonisation of indirect taxes in two open economies. The revenue from taxation is used for the production of a non-tradeable public good. The welfare levels are affected via two channels: (i) changes in the levels of public good provision, and (ii) changes in deadweight loss associated with the taxes. We develop a number of rules of harmonisation and derive conditions under which they lead to potential Pareto improvement.
Resumo:
Background Several prospective studies have suggested that gait and plantar pressure abnormalities secondary to diabetic peripheral neuropathy contributes to foot ulceration. There are many different methods by which gait and plantar pressures are assessed and currently there is no agreed standardised approach. This study aimed to describe the methods and reproducibility of three-dimensional gait and plantar pressure assessments in a small subset of participants using pre-existing protocols. Methods Fourteen participants were conveniently sampled prior to a planned longitudinal study; four patients with diabetes and plantar foot ulcers, five patients with diabetes but no foot ulcers and five healthy controls. The repeatability of measuring key biomechanical data was assessed including the identification of 16 key anatomical landmarks, the measurement of seven leg dimensions, the processing of 22 three-dimensional gait parameters and the analysis of four different plantar pressures measures at 20 foot regions. Results The mean inter-observer differences were within the pre-defined acceptable level (<7 mm) for 100 % (16 of 16) of key anatomical landmarks measured for gait analysis. The intra-observer assessment concordance correlation coefficients were > 0.9 for 100 % (7 of 7) of leg dimensions. The coefficients of variations (CVs) were within the pre-defined acceptable level (<10 %) for 100 % (22 of 22) of gait parameters. The CVs were within the pre-defined acceptable level (<30 %) for 95 % (19 of 20) of the contact area measures, 85 % (17 of 20) of mean plantar pressures, 70 % (14 of 20) of pressure time integrals and 55 % (11 of 20) of maximum sensor plantar pressure measures. Conclusion Overall, the findings of this study suggest that important gait and plantar pressure measurements can be reliably acquired. Nearly all measures contributing to three-dimensional gait parameter assessments were within predefined acceptable limits. Most plantar pressure measurements were also within predefined acceptable limits; however, reproducibility was not as good for assessment of the maximum sensor pressure. To our knowledge, this is the first study to investigate the reproducibility of several biomechanical methods in a heterogeneous cohort.
Resumo:
Background There is a comprehensive literature on the academic outcomes (attrition and success) of students in traditional/baccalaureate nursing programs, but much less is known about the academic outcomes of students in accelerated nursing programs. The aim of this systematic review is to report on the attrition and success rates (either internal examination or NCLEX-RN) of accelerated students, compared to traditional students. Methods For the systematic review, the databases (Pubmed, Cinahl and PsychINFO) and Google Scholar were searched using the search terms ‘accelerated’ or ‘accreditation for prior learning’, ‘fast-track’ or ‘top up’ and ‘nursing’ with ‘attrition’ or ‘retention’ or ‘withdrawal’ or ‘success’ from 1994 to January 2016. All relevant articles were included, regardless of quality. Results The findings of 19 studies of attrition rates and/or success rates for accelerated students are reported. For international accelerated students, there were only three studies, which are heterogeneous, and have major limitations. One of three studies has lower attrition rates, and one has shown higher success rates, than traditional students. In contrast, another study has shown high attrition and low success for international accelerated students. For graduate accelerated students, most of the studies are high quality, and showed that they have rates similar or better than traditional students. Thus, five of six studies have shown similar or lower attrition rates. Four of these studies with graduate accelerated students and an additional seven studies of success rates only, have shown similar or better success rates, than traditional students. There are only three studies of non-university graduate accelerated students, and these had weaknesses, but were consistent in reporting higher attrition rates than traditional students. Conclusions The paucity and weakness of information available makes it unclear as to the attrition and/or success of international accelerated students in nursing programs. The good information available suggests that accelerated programs may be working reasonably well for the graduate students. However, the limited information available for non-university graduate students is weak, but consistent, in suggesting they may struggle in accelerated courses. Further studies are needed to determine the attrition and success rates of accelerated students, particularly for international and non-university graduate students.
Resumo:
In common law jurisdictions such as England, Australia, Canada and New Zealand good faith in contracting has long been recognised in specific areas of the law such as insurance law and franchising, and more recently the implied duties of good faith and mutual trust and convenience in employment contracts have generated a considerable volume of case law. Outside of these areas of law that may be characterised as being strongly‘relational’ in character,the courts in common law jurisdictions have been reluctant to embrace a more universal application of good faith in contracting and performance. However increasingly there are cases which support the proposition that there is a common law duty of good faith of general application to all commercial contracts. Most important in this context is the recent decision of the Supreme Court of Canada in Bhasin v Hrynew.1 However, this matter is by no means resolved in all common law jurisdictions. This article looks at the recent case law and literature and at various legislative incursions including statutes, codes of conduct and regulations impacting good faith in commercial dealings.