Motivational interventions may have greater sustained impact if they trained imagery-based self-management

McCambridge & Rollnick [1] argue that increased benefits from brief motivational interventions (MIs) for alcohol abuse may be obtained if they addressed patients’ con- cerns more directly, especially in severe dependence and primary care. We agree, but take the idea a step further. Recent research on comorbidity has illustrated the power of simultaneously addressing multiple issues in an integrated manner, especially when these changes have synergistic effects (as typically occurs with psycho- sis and substance use [2]). Integrated MI for comorbidity can even be used productively in a single-session format [3]. This idea may have wider application. Recent work in remote Indigenous Australian communities has highlighted the benefits of a broad-ranging discussion of key relationships, activities and resources that confer strength, as well as aspects that worry them or cause dissatisfaction [4]. If excessive drinking is present, its impact on other life areas is reviewed, as in standard MI. However, it is considered alongside other highly valued goals. While the approach has demonstrated effects on both alcohol use and mental health [5], its impact is restricted only by the range of goals that are selected...

Correlation based method for phase identification in a three phase LV distribution network

Low voltage distribution networks feature a high degree of load unbalance and the addition of rooftop photovoltaic is driving further unbalances in the network. Single phase consumers are distributed across the phases but even if the consumer distribution was well balanced when the network was constructed changes will occur over time. Distribution transformer losses are increased by unbalanced loadings. The estimation of transformer losses is a necessary part of the routine upgrading and replacement of transformers and the identification of the phase connections of households allows a precise estimation of the phase loadings and total transformer loss. This paper presents a new technique and preliminary test results for a method of automatically identifying the phase of each customer by correlating voltage information from the utility's transformer system with voltage information from customer smart meters. The techniques are novel as they are purely based upon a time series of electrical voltage measurements taken at the household and at the distribution transformer. Experimental results using a combination of electrical power and current of the real smart meter datasets demonstrate the performance of our techniques.

An RFID-based traceability system

Traceability system in the food supply chain is becoming more necessary. RFID and EPCglobal Network Standards are emerging technologies that bring new opportunities to develop the high performance traceability system. This research proposes the analysis, design, and development of the RFID and EPCglobal Network Standards based traceability system that adheres to the requirements of global food traceability in terms of completeness of traceability information. The additional components, including lot management system and electronic transaction management system, encourage the traditional system in order to fulfill the missing information. The proposed system was developed and applied in a rice supply chain. Results from experimentation showed that the additional components can significantly improve the completeness of traceability information. The collaboration between EPCglobal Network Standards and electronic transaction management system can improve the performances in RFID operations.

Patient perspectives of using a web based intervention program for patients with type 2 diabetes and acute coronary syndrome

Introduction Research highlights patients with dual diagnoses of type 2 diabetes and acute coronary syndrome (ACS) have higher readmission rates and poorer health outcomes than patients with singular chronic conditions. Despite this, there is a lack of education programs targeted for this dual diagnosis population to improve self-management and decrease negative health outcomes. There is evidence to suggest that internet based interventions may improve health outcomes for patients with singular chronic conditions, however there is a need to develop an evidence base for ACS patients with comorbid diabetes. There is a growing awareness of the importance of a participatory model in developing effective online interventions. That is, internet interventions are more effective if end users’ perceptions of the intervention are incorporated in their final development prior to testing in large scale trials. Objectives This study investigated patients’ perspectives of the web-based intervention designed to promote self-management of the dual conditions in order to refine the intervention prior to clinical trial evaluation. Methods An interpretive approach with thematic analysis was used to obtain deeper understanding regarding participants’ experience when using web-application interventions for patients with ACS and type 2 diabetes. Semi-structured interviews were undertaken on a purposive sample of 30 patients meeting strict inclusion and exclusion criteria to obtain their perspectives on the program. Results Preliminary results indicate patients with dual diagnoses express more complex needs than those with a singular condition. Participants express a positive experience with the proposed internet intervention and emerging themes include that the web page is seen as easy to use and comforting as a support, in that patients know they are not alone. Further results will be reported as they become available. Conclusion The results indicate potential for patient acceptability of the newly developed internet intervention for patients with ACS and comorbid diabetes. Incorporation of patient perspectives into the final development of the intervention is likely to maximise successful outcomes of any future trials that utilise this intervention. Future quantitative evaluation of the effectiveness of the intervention is being planned.

A randomised controlled trial of an online theory-based intervention to improve adult Australians' sun-protective behaviours

Objective. To evaluate the effectiveness of a single-session online theory of planned behaviour (TPB)-based intervention to improve sun-protective attitudes and behaviour among Australian adults. Methods. Australian adults (N = 534; 38.7% males; Mage = 39.3 years) from major cities (80.9%), regional (17.6%) and remote areas (1.5%)were recruited and randomly allocated to an intervention (N=265) and information only group (N = 267). The online intervention focused on fostering positive attitudes, perceptions of normative support, and control perceptions for sun protection. Participants completed questionnaires assessing standard TPB measures (attitude, subjective norm, perceived behavioural control, intention, behaviour) and extended TPB constructs of group norm (friends, family), personal norm, and image norm, pre-intervention (Time 1) and one week (Time 2) and one month post-intervention (Time 3). Repeated Measures Multivariate Analysis of Variance tested intervention effects across time. Results. Intervention participants reported more positive attitudes towards sun protection and used sunprotective measures more often in the subsequent month than participants receiving information only. The intervention effects on control perceptions and norms were non-significant. Conclusions. A theory-based online intervention fostering more favourable attitudes towards sun safety can increase sun protection attitudes and self-reported behaviour among Australian adults in the short term.

Strategies for teaching evidence-based practice to undergraduate health students: A systematic review protocol

Review question/objective The objective of this review is to find, critically appraise and synthesize the available quantitative evidence on the effectiveness of interventions that promote successful teaching of the evidence-based practice process in undergraduate health students, in preparation for them to become professional evidence-based practitioners. More specifically, the question that this review seeks to answer is: What is the effectiveness of teaching strategies for evidence-based practice for undergraduate health students? Inclusion criteria Types of participants This review will consider studies that include undergraduate health students from any undergraduate health discipline, including but not limited to medicine, nursing and allied health. Post graduate and post-registration students will not be included. Types of interventions This review will consider studies that evaluate strategies or interventions aimed at teaching any or all of the five steps of evidence-based practice, namely asking a structured clinical question; collecting the best evidence available; critically appraising the evidence to ensure validity, relevance and applicability; applying or integrating the results into clinical practice, and evaluating outcomes. The strategy may take place solely within a tertiary education environment or may be combined with a clinical setting. Types of outcomes This review will consider studies that include the following outcome measures: evidence-based practice behavior, knowledge, skills, attitudes, self-efficacy (or self-confidence), beliefs, values, intention to use evidence-based practice (future use) and confidence levels. Tools used to measure these outcomes will be assessed for reported validity, reliability and generalizability. Outcomes will be measured during the student’s education period up to graduation. If studies are conducted across different year levels this will be taken into account during analysis and reported accordingly.

Process engineering aspects of plasmid-based biopharmaceuticals production : tackling the threatening vaccine shortages to prevent global pandemics

Infectious diseases such as SARS, influenza and bird flu have the potential to cause global pandemics; a key intervention will be vaccination. Hence, it is imperative to have in place the capacity to create vaccines against new diseases in the shortest time possible. In 2004, The Institute of Medicine asserted that the world is tottering on the verge of a colossal influenza outbreak. The institute stated that, inadequate production system for influenza vaccines is a major obstruction in the preparation towards influenza outbreaks. Because of production issues, the vaccine industry is facing financial and technological bottlenecks: In October 2004, the FDA was caught off guard by the shortage of flu vaccine, caused by a contamination in a US-based plant (Chiron Corporation), one of the only two suppliers of US flu vaccine. Due to difficulties in production and long processing times, the bulk of the world's vaccine production comes from very small number of companies compared to the number of companies producing drugs. Conventional vaccines are made of attenuated or modified forms of viruses. Relatively high and continuous doses are administered when a non-viable vaccine is used and the overall protective immunity obtained is ephemeral. The safety concerns of viral vaccines have propelled interest in creating a viable replacement that would be more effective and safer to use.

Weight and weight change following breast cancer : evidence from a prospective, population-based, breast cancer cohort study

Background: While weight gain following breast cancer is considered common, results supporting these findings are dated. This work describes changes in body weight following breast cancer over 72 months, compares weight with normative data and explores whether weight changes over time are associated with personal, diagnostic, treatment or behavioral characteristics. Methods: A population-based sample of 287 Australian women diagnosed with early-stage invasive breast cancer was assessed prospectively at six, 12, 18 and 72 months post-surgery. Weight was clinically measured and linear mixed models were used to explore associations between weight and participant characteristics (collected via self-administered questionnaire). Those with BMI changes of one or more units were considered to have experienced clinically significant changes in weight. Results: More than half (57%) of participants were overweight or obese at 6 months post-surgery, and by 72 months post-surgery 68% of women were overweight or obese. Among those who gained more weight than age-matched norms, clinically significant weight gain between 6 and 18 months and 6 and 72 months post-surgery was observed in 24% and 39% of participants, respectively (median [range] weight gain: 3.9kg [2.0-11.3kg] and 5.2kg [0.6-28.7], respectively). Clinically-significant weight losses were observed in up to 24% of the sample (median [range] weight loss between 6 and 72 months post-surgery: -6.4kg [-1.9--24.6kg]). More extensive lymph node removal, being treated on the non-dominant side, receiving radiation therapy and lower physical activity levels at 6 months was associated with higher body weights post-breast cancer (group differences >3kg; all p<0.05). Conclusions: While average weight gain among breast cancer survivors in the long-term is small, subgroups of women experience greater gains linked with adverse health and above that experienced by age-matched counterparts. Weight change post-breast cancer is a contemporary public health issue and the integration of healthy weight education and support into standard breast cancer care has potential to significantly improve the length and quality of cancer survivorship.

Developing health literacy through school based health education : can reality match rhetoric

Recently in Australia, the National Health and Hospitals Reform Commission (2009) and National Preventative Health Taskforce (2009) recommended that one way to strengthen consumer engagement within a health system is to ensure health literacy comprise a core element of the National Curriculum for primary and secondary schooling. However, whilst nationally and internationally schools are mandated to teach health education, there is considerable disjuncture between societies' broad expectations and schools' capacities to deliver programs that promote healthy Jiving (Marks, 2010; Basch, 2010). Given the centrality of literacy education in contemporary schooling (Snyder, 2008), 'health literacy' has been identified as a construct that offers the potential to close this perceived gap (McCuaig, Coore & Hay, 2012; Kickbusch, 2001). To date, there has been limited research asto what a health literacy focused, school based health education curriculum could look like.

Fibroin-based materials support co-cultivation of limbal epithelial and stromal cells

The silk protein fibroin (Bombyx mori) provides a potential substrate for use in ocular tissue reconstruction. We have previously demonstrated that transparent membranes produced from fibroin support cultivation of human limbal epithelial (HLE) cells (Tissue Eng A. 14(2008)1203-11). We extend this body of work to studies of human limbal stromal cell (HLS) growth on fibroin in the presence and absence of serum. Also, we investigate the ability to produce a bi-layered composite scaffold of fibroin with an upper HLE layer and lower HLS layer.

Two-dimensional hydrogen-bonded polymers in the crystal structures of the ammonium salts of phenoxyacetic acid, (4-fluorophenoxy)acetic acid and (4-chloro-2-methylphenoxy)acetic acid

The structures of the ammonium salts of phenoxyacetic acid, NH4+ C8H6O3- (I), (4-fluorophenoxy)acetic acid NH4+ C8H5FO3- (II) and the herbicidally active (4-chloro-2-methylphenoxy)acetic acid (MCPA), NH4+ C9H8ClO3-. 0.5(H2O) (III) have been determined. All have two-dimensional layered structures based on inter-species ammonium N-H...O hydrogen-bonding associations which give core substructures consisting primarily of conjoined cyclic motifs. Crystals of (I) and (II) are isomorphous with the core comprising R2/1(5), R2/1(4) and centrosymmetric R2/4(8) ring motifs, giving two-dimensional layers lying parallel to (100). In (III), the water molecule of solvation lies on a crystallographic twofold rotation axis and bridges two carboxyl O-atoms in an R4/4(12) hydrogen-bonded motif, creating two R3/4(10) rings which together with a conjoined centrosymmetric R2/4(8) ring incorporating both ammonium cations, generate two-dimensional layers lying parallel to (100). No pi-pi ring associations are present in any of the structures.

A workplace-based Participatory Action Research project to investigate the effectiveness of nutrition and physical activity interventions for truck drivers in six Queensland transport industry workplaces: 2012-2015

The Queensland Transport Industry Workplace Health Intervention project was a Participatory Action Research (PAR) project to investigate the effectiveness of workplace-based nutrition and physical activity health promotion interventions for truck drivers in transport industry workplaces in south-east Queensland. The project was conducted by a research team at the Queensland University of Technology (QUT), and was funded by the Queensland Government under the Healthier.Happier.Workplaces initiative.

Structural identification of a laboratory-based steel through truss cantilevered bridge with suspended span using a layered genetic algorithm with patternsearch step (GAPS)

Structural identification (St-Id) can be considered as the process of updating a finite element (FE) model of a structural system to match the measured response of the structure. This paper presents the St-Id of a laboratory-based steel through-truss cantilevered bridge with suspended span. There are a total of 600 degrees of freedom (DOFs) in the superstructure plus additional DOFs in the substructure. The St-Id of the bridge model used the modal parameters from a preliminary modal test in the objective function of a global optimisation technique using a layered genetic algorithm with patternsearch step (GAPS). Each layer of the St-Id process involved grouping of the structural parameters into a number of updating parameters and running parallel optimisations. The number of updating parameters was increased at each layer of the process. In order to accelerate the optimisation and ensure improved diversity within the population, a patternsearch step was applied to the fittest individuals at the end of each generation of the GA. The GAPS process was able to replicate the mode shapes for the first two lateral sway modes and the first vertical bending mode to a high degree of accuracy and, to a lesser degree, the mode shape of the first lateral bending mode. The mode shape and frequency of the torsional mode did not match very well. The frequencies of the first lateral bending mode, the first longitudinal mode and the first vertical mode matched very well. The frequency of the first sway mode was lower and that of the second sway mode was higher than the true values, indicating a possible problem with the FE model. Improvements to the model and the St-Id process will be presented at the upcoming conference and compared to the results presented in this paper. These improvements will include the use of multiple FE models in a multi-layered, multi-solution, GAPS St-Id approach.

Development of a new ultrasound-based system for tracking motion of the human lumbar spine: Reliability, stability and repeatability during forward bending movement trials

The aim of this study was to develop a new method for quantifying intersegmental motion of the spine in an instrumented motion segment L4–L5 model using ultrasound image post-processing combined with an electromagnetic device. A prospective test–retest design was employed, combined with an evaluation of stability and within- and between-day intra-tester reliability during forward bending by 15 healthy male patients. The accuracy of the measurement system using the model was calculated to be ± 0.9° (standard deviation = 0.43) over a 40° range and ± 0.4 cm (standard deviation = 0.28) over 1.5 cm. The mean composite range of forward bending was 15.5 ± 2.04° during a single trial (standard error of the mean = 0.54, coefficient of variation = 4.18). Reliability (intra-class correlation coefficient = 2.1) was found to be excellent for both within-day measures (0.995–0.999) and between-day measures (0.996–0.999). Further work is necessary to explore the use of this approach in the evaluation of biomechanics, clinical assessments and interventions.

High-throughput approach for the identification of anilinium-based ionic liquids that are suitable for electropolymerisation

We report the synthesis of new protic ionic liquids (PILs) based on aniline derivatives and the use of high-throughput (HT) techniques to screen possible candidates. In this work, a simple HT method was applied to rapidly screen different aniline derivatives against different acids in order to identify possible combinations that produce PILs. This was followed by repeating the HT process with Chemspeed robotic synthesis platform for more accurate results. One of the successful combinations were then chosen to be synthesised on full scale for further analysis. The new PILs are of interest to the fields of ionic liquids, energy storage and especially, conducting polymers as they serve as solvents, electrolytes and monomers in the same time for possible electropolymerisation (i.e. a self-contained polymer precursor).