Bisphenol A degradation enhanced by air bubbles via advanced oxidation using in situ generated ferrous ions from nano zero-valent iron/palygorskite composite materials

Novel nano zero-valent iron/palygorskite composite materials prepared by evaporative and centrifuge methods are tested for the degradation of bisphenol A in an aqueous medium. A systematic study is presented which showed that nano zero-valent iron material has little effect on bisphenol A degradation. When hydrogen peroxide was added to initiate the reaction, some percentage of bisphenol A removal (∼20%) was achieved; however, with the aid of air bubbles, the percentage removal can be significantly increased to ∼99%. Compared with pristine nano zero-valent iron and commercial iron powder, nano zero-valent iron/palygorskite composite materials have much higher reactivity towards bisphenol A and these materials are superior as they have little impact on the solution pH. However, for pristine nano zero-valent iron, it is difficult to maintain the reaction system at a favourable low pH which is a key factor in maintaining high bisphenol A removal. All materials were characterized by X-ray diffraction, scanning electron microscopy, elemental analysis, transmission electron microscopy and X-ray photoelectron spectroscopy. The optimum conditions were obtained based on a series of batch experiments. This study has extended the application of nano zero-valent iron/palygorskite composites as effective materials for the removal of phenolic compounds from the environment.

Effect of crack depth and specimen width on fracture toughness of a carbon steel in the ductile-brittle transition region

The effects of crack depth (a/W) and specimen width W on the fracture toughness and ductile±brittle transition have been investigated using three-point bend specimens. Finite element analysis is employed to obtain the stress-strain fields ahead of the crack tip. The results show that both normalized crack depth (a/W) and specimen width (W) affect the fracture toughness and ductile±brittle fracture transition. The measured crack tip opening displacement decreases and ductile±brittle transition occurs with increasing crack depth (a/W) from 0.1 to 0.2 and 0.3. At a fixed a/W (0.2 or 0.3), all specimens fail by cleavage prior to ductile tearing when specimen width W increases from 25 to 40 and 50 mm. The lower bound fracture toughness is not sensitive to crack depth and specimen width. Finite element analysis shows that the opening stress in the remaining ligament is elevated with increasing crack depth or specimen width due to the increase of in-plane constraint. The average local cleavage stress is dependent on both crack depth and specimen width but its lower bound value is not sensitive to constraint level. No fixed distance can be found from the cleavage initiation site to the crack tip and this distance increases gradually with decreasing inplane constraint.

A platform - independent product library for BIM

There is considerable interest internationally in developing product libraries to support the use of BIM. Product library initiatives are driven by national bodies, manufacturers and private companies who see their potential. A major issue with the production and distribution of product information for BIM is that separate library objects need to be produced for all of the different software systems that are going to use the library. This increases the cost of populating product libraries and also increases the difficulty in maintaining consistency between the representations for the different software over time. This paper describes a project which uses “software transformation” technology from the field of software engineering to support the definition of a single generic representation of a product which can then be automatically converted to the format required by receiving software. The paper covers the current state of implementation of the product library, the technology underlying the transformations for the currently supported software and the business model for creating a national library in Australia. This is placed within the context of other current product library systems to highlight the differences. The responsibilities of the various actors involved in supporting the product library are also discussed.

Narratives of possession : reading for saga authorship

The aim of this thesis is to show how character analysis can be used to approach conceptions of saga authorship in medieval Iceland. The idea of possession is a metaphor that is adopted early in the thesis, and is used to describe Icelandic sagas as works in which traditional material is subtly interpreted by medieval authors. For example, we can say that if authors claim greater possession of the sagas, they interpret, and not merely record, the sagas' historical information. On the other hand, tradition holds onto its possession of the narrative whenever it is not possible for an author to develop his own creative and historical interests. The metaphor of possession also underpins the character analysis in the thesis, which is based on the idea that saga authors used characters as a vehicle by which to possess saga narratives and so develop their own historical interests. The idea of possession signals the kinds of problems of authorship study which are addressed here, in particular, the question of the authors' sense of saga writing as an act either of preservation or of creation. While, in that sense, the thesis represents an additional voice in a long-standing debate about the saga writers' relation to their source materials, I argue against a clear-cut distinction between creative and non-creative authors, and focus instead on the wide variation in authorial control over saga materials. This variation suggests that saga authorship is a multi-functional activity, or one which co-exists with tradition. Further, by emphasising characterisation as a method, I am adding to the weight of scholarship that seeks to understand the sagas in terms of their literary effects. The Introduction and chapter one lay out the theoretical scope of this thesis. My aim in these first two sections is to inform the reader of the type of critical questions that arise when authorship is approached in relation to characterisation, and to suggest an interpretive framework with which to approach these questions. In the Introduction this aim manifests as a brief discussion of the application of the term "authorship" to the medieval Icelandic corpus, a definition of the scope of this study, and an introduction to the connections, made throughout this thesis, between saga authors, the sagas' narrative style, and the style of characterisation in the sagas. Chapter one is a far more detailed discussion of our ability to make these connections. In particular, the chapter develops the definition of the analytical term "secondary authorship" that I introduce in order to delineate the type of characterisation that is of most interest in this thesis. "Secondary authorship" is a literary term that aims to sharpen our approach to saga authors' relationship to their characters by focusing on characters who make representations about the events of the saga. The term refers to any instance in which characters behave in a manner that resembles the creativity, interpretation, and understanding associated with authorship more generally. Character analysis cannot, however, be divorced from socio-historical approaches to the saga corpus. Most importantly, the sagas themselves are socio-historical representations that claim some degree of truth value. This claim that the sagas make by implication about their historicity is the starting point of a discussion of authorship in medieval Iceland. Therefore, at the beginning of chapter one I discuss some of the approaches to the social context of saga writing. This discussion serves as an introduction to both the culture of saga writing in medieval Iceland and to the nature of the sagas' historical perspective, and reflects my sense that literary interpretations of the sagas cannot be isolated from the historical discourses that frame them. The chapter also discusses possession, which, as I note above, is used alongside the concept of secondary authorship to describe the saga authors' relationship with the stories and characters of the past. At the close of chapter one, I offer a preliminary list the various functions of saga authorship, and give some examples of secondary authorship. From this point I am able to tie my argument about secondary authorship to specific examples from the sagas. Chapter two examines the effect of family obligations and domestic points of view in the depiction of characters' choices and conception of themselves. The examples that are given in that chapter - from Gisla saga Súrssonar and Íslendinga saga - are the first of a number of textual analyses that demonstrate the application of the concepts of secondary authorship and possession of saga narratives. The relationship between narratives about national and domestic matters shows how authorial creativity in the area of kinship obligation provides the basis for the saga's development of historical themes. Thus, the two major case studies given in chapter two tie authorial engagement with characters to the most influential social institution in early and medieval Iceland, the family. The remaining chapters represent similar attempts to relate authorial possession of saga characters to central socio-historical themes in the sagas, such as the settlement process in early Iceland and its influence on the development of regional political life (chapter three). Likewise, the strong authorial interest in an Icelander's journey to Norway in Heimskringla is presented as evidence of the author's use of a saga character to express an Icelandic interpretation of Norwegian history and to promote a sense that Iceland shared the ownership of regal history with Norway (chapter four). In that authorial engagement with the Icelander abroad, we witness saga characterisation being used as a basis for historical interpretation and the means by which foreign traditions and influence, not least the narratives of royal lives and of the Christianisation, are claimed as part of medieval Icelanders' self-conception. While saga authors observe the conventions of saga narration, characters are often subtly positioned as the authors' interpretive mirrors, especially clear than when they act as secondary authors. Nowhere is this more apparent than in Brennu- Njáls saga, which contains many characters who voice the author's claim to interpret the past. Even Hrútr Herjólfsson, through his remarkable perception of events and his conspicuous comments about them, acts as a secondary author by enabling the author to emphasise the importance of the disposition of characters. In Laxdœla saga and Þorgils saga ok Hafliða, authorial interest in characters' perception is matched by the thematising of learning, from the inception of knowledge as prophecy or advice to complete understanding by saga characters (chapter six). In Þorgils saga skarða, a character's inner development from an excessively ambitious and politically ruthless youth to a Christian leader killed by his kinsman allows the author to shape a political life into a lesson about leadership and the community's ability to moderate and contain the behaviour of extraordinary individuals. The portrayal draws on methods of characterisation that we can identify in Grettis saga Ásmundarson, Fóstbrœðra saga, and Orkneyinga saga. A comparison of the characterisation of figures with intense political or military ambitions suggests that saga authors were interested in the community's ability to balance their strength and ability with a degree of social moderation. The discussion of these sagas shows that character study can be used to analyse how the saga authors added their own voice to the voices passed down to medieval Icelanders in traditional narratives. Authorial engagement with characters allowed inherited traditions about early Norway and Iceland and records of thirteenth century events to be transformed into sophisticated historical works with highly creative elements. Through secondary authorship, saga authors took joint-possession of narratives and contested the power of tradition in setting the interpretive framework of a saga.

Effect of constraint on ductile crack growth and ductile-brittle fracture transition of a carbon steel

Ductile-brittle fracture transition was investigated using compact tension (CT) specimens from -70oC to 40oC for a carbon steel. Large deformation finite element analysis has been carried out to simulate the stable crack growth in the compact tension (CT, a/W=0.6), three point-point bend (SE(B), a/W=0.1) and centre-cracked tension (M(T), a/W=0.5) specimens. Experimental crack tip opening displacement (CTOD) resistance curve was employed as the crack growth criterion. Ductile tearing is sensitive to constraint and tearing modulus increases with reduced constraint level. The finite element analysis shows that path-dependence of J-integral occurs from the very beginning of crack growth and ductile crack growth elevates the opening stress on the remaining ligament. Cleavage may occur after some ductile crack growth due to the increase of opening stress. For both stationary and growing cracks, the magnitude of opening stress increases with increasing in-plane constraint. The ductile-brittle transition takes place when the opening stress ahead of the crack tip reaches the local cleavage stress as the in-plane constraint of the specimen increases.

Using social media to create a participatory library service : an Australian study

Public libraries are increasingly using social media in an attempt to meet users in their own spaces. Social media can be useful when used to create a participatory library service – to engage with users. However, there has been little empirical investigation into the success of social media use by public libraries. This article reports on the findings of a research project that explored the use of social media by Australian public libraries. Two organisations participated in case studies that involved interviews, document analysis, and social media observation. To contextualise the use of social media in the case study organisations, a sub study was undertaking involving observation of an additional 24 public libraries across Australia. This article focuses on the findings from the observation sub study. It presents and applies a methodology for classifying social media content to determine whether the sample libraries’ social media use is indicative of a participatory approach to service delivery. This article explores how a range of social media platforms are used by the sample libraries and considers what ‘best practice’ in participatory library service looks like. The two case study organisations’ use of social media is highlighted as exemplary practice.

DDT resistance and transformation by different microbial strains isolated from DDT-contaminated soils and compost materials

Bioremediation is a potential option to treat 1, 1, 1-trichloro-2, 2 bis (4-chlorophenyl) ethane (DDT) contaminated sites. In areas where suitable microbes are not present, the use of DDT resistant microbial inoculants may be necessary. It is vital that such inoculants do not produce recalcitrant breakdown products e.g. 1, 1-dichloro-2, 2-bis (4-chlorophenyl) ethylene (DDE). Therefore, this work aimed to screen DDT-contaminated soil and compost materials for the presence of DDT-resistant microbes for use as potential inoculants. Four compost amended soils, contaminated with different concentrations of DDT, were used to isolate DDT-resistant microbes in media containing 150 mg I -1 DDT at three temperatures (25, 37 and 55°C). In all soils, bacteria were more sensitive to DDT than actinomycetes and fungi. Bacteria isolated at 55°C from any source were the most DDT sensitive. However DDT-resistant bacterial strains showed more promise in degrading DDT than isolated fungal strains, as 1, 1-dichloro 2, 2-bis (4-chlorophenyl) ethane (DDD) was a major bacterial transformation product, while fungi tended to produce more DDE. Further studies on selected bacterial isolates found that the most promising bacterial strain (Bacillus sp. BHD-4) could remove 51% of DDT from liquid culture after 7 days growth. Of the amount transformed, 6% was found as DDD and 3% as DDE suggesting that further transformation of DDT and its metabolites occurred.

Generalized azimuthal shear deformations in compressible isotropic elastic materials

In this article we study the azimuthal shear deformations in a compressible Isotropic elastic material. This class of deformations involves an azimuthal displacement as a function of the radial and axial coordinates. The equilibrium equations are formulated in terms of the Cauchy-Green strain tensors, which form an overdetermined system of partial differential equations for which solutions do not exist in general. By means of a Legendre transformation, necessary and sufficient conditions for the material to support this deformation are obtained explicitly, in the sense that every solution to the azimuthal equilibrium equation will satisfy the remaining two equations. Additionally, we show how these conditions are sufficient to support all currently known deformations that locally reduce to simple shear. These conditions are then expressed both in terms of the invariants of the Cauchy-Green strain and stretch tensors. Several classes of strain energy functions for which this deformation can be supported are studied. For certain boundary conditions, exact solutions to the equilibrium equations are obtained. © 2005 Society for Industrial and Applied Mathematics.

Indonesian LIS professionals’ understanding of Library 2.0 : a pilot study

The literature around Library 2.0 remains largely theoretical with few empirically studies and is particularly limited in developing countries such as Indonesia. This study addresses this gap and aims to provide information about the current state of knowledge on Indonesian LIS professionals’ understanding of Library 2.0. The researchers used qualitative and quantitative approaches for this study, asking thirteen closed- and open-ended questions in an online survey. The researchers used descriptive and in vivo coding to analyze the responses. Through their analysis, they identified three themes: technology, interactivity, and awareness of Library 2.0. Respondents demonstrated awareness of Library 2.0 and a basic understanding of the roles of interactivity and technology in libraries. However, overreliance on technology used in libraries to conceptualize Library 2.0 without an emphasis on its core characteristics and principles could lead to the misalignment of limited resources. The study results will potentially strengthen the research base for Library 2.0 practice, as well as inform LIS curriculum in Indonesia so as to develop practitioners who are able to adapt to users’ changing needs and expectations. It is expected that the preliminary data of this study could be used to design a much larger and more complex future research project in this area.

Nanopore processing in dielectric materials and dielectric template-assisted nanoarray synthesis : using pulsed bias to enhance process throughput and precision

An effective technique to improve the precision and throughput of energetic ion condensation through dielectric nanoporous templates and reduce nanopore clogging by using finely tuned pulsed bias is proposed. Multiscale numerical simulations of ion deposition show the possibility of controlling the dynamic charge balance on the upper template's surface to minimize ion deposition on nanopore sidewalls and to deposit ions selectively on the substrate surface in contact with the pore opening. In this way, the shapes of nanodots in template-assisted nanoarray fabrication can be effectively controlled. The results are applicable to various processes involving porous dielectric nanomaterials and dense nanoarrays.

Nanosphere monolayer-templated, ion-assisted nanofeature etching in dielectric materials : a numerical simulation of nanoscale ion flux topography

The results of numerical simulations of nanometer precision distributions of microscopic ion fluxes in ion-assisted etching of nanoscale features on the surfaces of dielectric materials using a self-assembled monolayer of spherical nanoparticles as a mask are presented. It is shown that the ion fluxes to the substrate and nanosphere surfaces can be effectively controlled by the plasma parameters and the external bias applied to the substrate. By proper adjustment of these parameters, the ion flux can be focused onto the areas uncovered by the nanospheres. Under certain conditions, the ion flux distributions feature sophisticated hexagonal patterns, which may lead to very different nanofeature etching profiles. The results presented are generic and suggest viable ways to overcome some of the limitations of the existing plasma-assisted nanolithography.

Nanostructured copper oxide semiconductors : a perspective on materials, synthesis methods and applications

The oxides of copper (CuxO) are fascinating materials due to their remarkable optical, electrical, thermal and magnetic properties. Nanostructuring of CuxO can further enhance the performance of this important functional material and provide it with unique properties that do not exist in its bulk form. Three distinctly different phases of CuxO, mainly CuO, Cu2O and Cu4O3, can be prepared by numerous synthesis techniques including, vapour deposition and liquid phase chemical methods. In this article, we present a review of nanostructured CuxO focusing on their material properties, methods of synthesis and an overview of various applications that have been associated with nanostructured CuxO.

Benchmarking potential factors leading to education quality : a study of Cambodian higher education

Purpose To study the quality in higher education in Cambodia and explore the potential factors leading to quality in Cambodian higher education. Design/methodology/approach Five main factors that were deemed relevant in providing quality in Cambodian higher education were proposed: academic curriculum and extra-curricular activities, teachers' qualification and methods, funding and tuition, school facilities, and interactive network. These five propositions were used to compare Shu-Te University, Taiwan with the top five universities in Cambodia. The data came in the forms of questionnaire and desk research. Descriptive analytical approach is then carried out to describe these five factors. Findings Only 6 per cent of lecturers hold PhD degree and about 85 per cent never published any papers; some private universities charge as low as USD200 per academic year, there is almost no donation from international organizations, and annual government funding on higher education sector nationwide in 2005 was only about USD3.67 million; even though there is a library at each university, books, study materials etc. are not up-to-date and inadequate; 90 per cent of the lecturers never have technical discussion or meeting and about 60 per cent of students felt that their teachers did not have time for them to consult with. Originality/value A useful insight was gained into the perceived importance of quality in higher education that can stimulate debate and discussion on the role of government in building the standard quality in higher education. Also, the findings from this research can assist in the development of a framework of developing human resource.