Social change grant-making : a failure of innovation?

Focusing primarily on Anglophone countries, this article begins by looking at the changing environment of foundations, the pressures on foundations and some responses to those pressures. It then focuses on the potential of a structural change approach - often known as 'social change' or 'social justice' grant-making - as a solution to some of the modern dilemmas of foundations, and considers why this approach has, with some exceptions, gained relatively little support. This raises the wider issues of why and how resource-independent, endowed foundations change when conventional explanations of organisational change do not easily apply. Researching a 'lack' is clearly difficult; this article adopts an analytic perspective, examining the characteristics of the structural change approach as a mimetic model, and draws on the work of Rogers (2003) on the characteristics required for the successful diffusion of innovations. It suggests that the structural change approach suffers from some fundamental weaknesses as a mimetic model, failing to meet some key characteristics for the diffusion of innovations. In conclusion, the article looks at conditions under which these weaknesses may be overcome.

Conceptualising value creation for social change management

Australian and international governments are increasingly adopting social marketing as a social change management tool to deal with complex social problems. Government decision makers typically need to balance the use of business models and management theories whilst maintaining the integrity of government policy. In taking this approach, decision makers experience management tensions between a social mission to equitably deliver social services and the accountability and affordability of providing quality social and health services to citizens. This is a significant challenge as the nature of the ‘social product’ in government is often more service-oriented than goods-based. In this paper the authors examine value creation in government social marketing services. The contribution of this paper is a value creation process model, which considers the nature of governments to create social good. This is particularly important for governments where consumers still expect value and quality in the service delivered, despite that offering being ‘free’.

Targeting injury prevention strategies to adolescents of Pacific Islander descent : what will work?

Background: Ethnicity is rarely considered in injury prevention program development, even though this is known to impact on participation in injury risk behaviour. An understanding of injury, risk behaviour and risk and protective factors specific to adolescents of Pacific Islander descent will inform the development of prevention strategies appropriate to this group.----- Aims: To determine patterns of injury and associated risk behaviour among adolescents of Pacific Islander descent, and to understand the risk and protective factors that influence injury rates among this group.----- Methods: A total of 875 Year 9 students from five Queensland high schools completed a survey during health classes. Seventy-one students (n = 38 male) identified as Pacific Islander. The survey consisted of scales examining injury, risk taking behaviour, and relationships with family, school and police.----- Results: The leading causes of injury among adolescents of Pacific Islander descent were sports (48%) and transport (e.g. 45% reported bicycle injuries). Interpersonal violence related injuries were also relatively frequent, with 28% having been injured in a fight. Reports of alcohol use were relatively low (20% c.f. 40% of the remaining sample), however reports of other risk behaviours were relatively high (e.g. 43% c.f. 25% of remaining sample reported a group fight).----- Discussion and conclusions: Conclusions will be drawn regarding risk-related injuries reported by adolescents of Pacific Islander descent and those of other ethnic backgrounds. Additionally, risk and protective factors relating to family, school and police will be explored, in order to inform prevention strategies appropriate to this group.

The research pathway to developing a health promotion intervention for the high school curriculum

Introduction: Schools provide the opportunity to reach a large number of adolescents in a systematic way however there are increasing demands on curriculum providing challenges for health promotion activities. This paper will describe the research processes and strategies used to design an injury prevention program.----- Methods: A multi-stage process of data collection included: (1) Surveys on injury-risk behaviours to identify targets of change (examining behaviour and risk/ protective factors among more than 4000 adolescents); (2) Focus groups (n= 30 high-risk adolescents) to understand and determine risk situations; (3) Hospital emergency outpatients survey to understand injury types/ situations; (4) Workshop (n= 50 teachers/ administrators) to understand the target curriculum and experiences with injury-risk behaviours; (5) Additional focus groups (students and teachers) regarding draft material and processes.----- Results: Summaries of findings from each stage are presented particularly demonstrating the design process. The baseline data identified target risk and protective factors. The following qualitative study provided detail about content and context and with the hospital findings assisted in developing ways to ensure relevance and meaning (e.g. identifying high risk situations and providing insights into language, culture and development). School staff identified links to school processes with final data providing feedback on curriculum fit, feasibility and appropriateness of resources. The data were integrated into a program which demonstrated reduced injury.----- Conclusions: A comprehensive research process is required to develop an informed and effective intervention. The next stage of a cluster randomised control trial is a major task and justifies the intensive and comprehensive development.

Combination strategies for a factor analysis phone-conditioned speaker verification system

This work aims to take advantage of recent developments in joint factor analysis (JFA) in the context of a phonetically conditioned GMM speaker verification system. Previous work has shown performance advantages through phonetic conditioning, but this has not been shown to date with the JFA framework. Our focus is particularly on strategies for combining the phone-conditioned systems. We show that the classic fusion of the scores is suboptimal when using multiple GMM systems. We investigate several combination strategies in the model space, and demonstrate improvement over score-level combination as well as over a non-phonetic baseline system. This work was conducted during the 2008 CLSP Workshop at Johns Hopkins University.

Union strategies in representing ‘new’ workers : the comparative case of UK and Australian retail unions

This paper is a comparative exploratory study of the changing nature of employee voice through trade union representation in the retail industry in the UK and Australia. In both countries, the retail industry is a major employer and is one of the few private sector service industries with significant union membership (Griffin et al 2003). The relevant unions, the Distributive and Allied Workers Union (USDAW) and the Shop, Distributive and Allied Union (SDA), are the fourth largest and largest unions in the UK and Australia respectively. However, despite this seeming numerical strength in membership, the characteristics of the industry provide unique challenges for employee voice and representation. The significance of the study is that any extension of representation and organisation by unions in the retail sector is valuable socially and politically, given that retail workers are often categorised a s vulnerable, due to their low pay, the predominance of disadvantaged labour market groups such a s women and young people, workers’ atypical employment arrangements and, in the case of the UK, variable levels of union recognition which inhibit representation (Broadbridge 2002; Henley 2006; Lynch 2005; Roan & Diamond 2003; Reynolds et al 2005). In addition, specifically comparative projects have value in that they allow some variables relating to the ‘industry’ to be held constant, thus reducing the range of potential explanations of differences in union strategy. They also have value in that the research partners may be more likely to notice and problematise taken-for-granted aspects of practices in another country, thus bringing to the fore key features and potentially leading to theoretical innovation. Finally, such projects may assist in transnational diffusion of union strategy.

The big brother : monitoring urban growth and change for sustainable infrastructure provision

Monitoring urban growth and land-use change is an important issue for sustainable infrastructure planning. Rapid urban development, sprawl and increasing population pressure, particularly in developing nations, are resulting in deterioration of infrastructure facilities, loss of productive agricultural lands and open spaces, pollution, health hazards and micro-climatic changes. In addressing these issues effectively, it is crucial to collect up-to-date and accurate data and monitor the changing environment at regular intervals. This chapter discusses the role of geospatial technologies for mapping and monitoring the changing environment and urban structure, where such technologies are highly useful for sustainable infrastructure planning and provision.

The relationship between construction firm strategies and innovation outcomes

Survey results provide a preliminary assessment of the relative contribution of a range of tactical business strategies to innovation performance by firms in the Australian construction industry. Over 1,300 firms were surveyed in 2004, resulting in a response rate of 29%. Respondents were classified as high, medium or low innovators according to an innovation index based on the novelty and impact of their innovations and their adoption of listed technological and organizational advances. The relative significance of 23 business strategies concerning (1) employees, (2) marketing, (3) technology, (4) knowledge and (5) relationships was examined by determining the extent to which they distinguished high innovators from low innovators. The individual business strategies that most strongly distinguished high innovators were (1) ‘investing in R&D’, (2) ‘participating in partnering and alliances on projects’, (3) ‘ensuring project learnings are transferred into continuous business processes’, (4) ‘monitoring international best practice’, and (5) ‘recruiting new graduates’. Of the five types of strategies assessed, marketing strategies were the least significant in supporting innovation. The results provide practical guidance to managers in project-based industries wishing to improve their innovation performance.

“I am a secondary teacher and I teach history and SOSE” : negotiating pre-service teacher identities in times of curriculum change

Secondary social education in Australia is set to change with the new national history curriculum but integrated social education will continue in the middle years of schooling. Competing discourses of disciplinary and integrated social education approaches create new challenges for pre-service teachers as identification with a teaching area is an important aspect of developing a broader teacher identity. Feedback on a compulsory, final year curriculum studies unit revealed the majority of secondary pre-service teachers identified with at least one social science discipline. However, only a small number listed the integrated social education curriculum of Studies of Society and Environment (SOSE), even though SOSE was an essential part of their brief. More complex identities were revealed in post-teaching practice interviews. In times of curriculum change, attention to pre-service teachers’ disciplinary knowledge is critical in developing a stable subject identity.

Marketing to change public opinion on climate change : a case study

Corporate advertisers spend far greater budgets than any social marketing campaign and have great potential to change public opinion on the urgent need for action on climate change. However “green-washing” has become a widespread practice by companies that wish to appear to be socially responsible without a genuine commitment and consumers can be very cynical about green marketing campaigns. Can companies be climate change advocates and still satisfy shareholders? This paper offers a case study on an Australian insurance company that argues it can make money from doing the right thing.

Living walls - a way to green the built environment

Actions Towards Sustainable Outcomes Environmental Issues/Principal Impacts The increasing urbanisation of cities brings with it several detrimental consequences, such as: • Significant energy use for heating and cooling many more buildings has led to urban heat islands and increased greenhouse gas emissions. • Increased amount of hard surfaces, which not only contributes to higher temperatures in cities, but also to increased stormwater runoff. • Degraded air quality and noise. • Health and general well-being of people is frequently compromised, by inadequate indoor air quality. • Reduced urban biodiversity. Basic Strategies In many design situations, boundaries and constraints limit the application of cutting EDGe actions. In these circumstances, designers should at least consider the following: • Living walls are an emerging technology, and many Australian examples function more as internal feature walls. However,as understanding of the benefits and construction of living walls develops this technology could be part of an exterior facade that enhances a building’s thermal performance. • Living walls should be designed to function with an irrigation system using non-potable water. Cutting EDGe Strategies • Living walls can be part of a design strategy that effectively improves the thermal performance of a building, thereby contributing to lower energy use and greenhouse gas emissions. • Including living walls in the initial stages of design would provide greater flexibility to the design, especially of the facade, structural supports, mechanical ventilation and watering systems, thus lowering costs. • Designing a building with an early understanding of living walls can greatly reduce maintenance costs. • Including plant species and planting media that would be able to remove air impurities could contribute to improved indoor air quality, workplace productivity and well-being. Synergies and References • Living walls are a key research topic at the Centre for Subtropical Design, Queensland University of Technology: http://www.subtropicaldesign.bee.qut.edu.au • BEDP Environment Design Guide: DES 53: Roof and Facade Gardens • BEDP Environment Design Guide: GEN 4: Positive Development – Designing for Net Positive Impacts (see green scaffolding and green space frame walls). • Green Roofs Australia: www.greenroofs.wordpress.com • Green Roofs for Healthy Cities USA: www.greenroofs.org

Establishment of a preclinical ovine model for tibial segmental bone defect repair by applying bone tissue engineering strategies

Currently, well-established clinical therapeutic approaches for bone reconstruction are restricted to the transplantation of autografts and allografts, and the implantation of metal devices or ceramic-based implants to assist bone regeneration. Bone grafts possess osteoconductive and osteoinductive properties, however they are limited in access and availability and associated with donor site morbidity, haemorrhage, risk of infection, insufficient transplant integration, graft devitalisation, and subsequent resorption resulting in decreased mechanical stability. As a result, recent research focuses on the development of alternative therapeutic concepts. The field of tissue engineering has emerged as an important approach to bone regeneration. However, bench to bedside translations are still infrequent as the process towards approval by regulatory bodies is protracted and costly, requiring both comprehensive in vitro and in vivo studies. The subsequent gap between research and clinical translation, hence commercialization, is referred to as the ‘Valley of Death’ and describes a large number of projects and/or ventures that are ceased due to a lack of funding during the transition from product/technology development to regulatory approval and subsequently commercialization. One of the greatest difficulties in bridging the Valley of Death is to develop good manufacturing processes (GMP) and scalable designs and to apply these in pre-clinical studies. In this article, we describe part of the rationale and road map of how our multidisciplinary research team has approached the first steps to translate orthopaedic bone engineering from bench to bedside byestablishing a pre-clinical ovine critical-sized tibial segmental bone defect model and discuss our preliminary data relating to this decisive step.

Identity and disciplinarity : Multi-disciplinary student cohorts in Higher Education [Abstract]

This paper will describe a research project that examines the implications of multidisciplinary student cohorts on teaching and learning within undergraduate and postgraduate units in higher education. Whist students generally specialise in one discipline, it is also common that, at some point during their degree, they will choose to undertake subjects that are outside their specialist area. Students may choose a multidisciplinary learning experience either out of interest or because the subject is seen as complementary to their core discipline. When the lens of identity is applied to the multi-disciplinary cohorts in undergraduate and postgraduate units, it assists in identifying learning needs. The nature of disciplinarity, and the impact it has on students’ academic identity, presents challenges to both students and teachers when they engage in teaching and learning, impacting on curriculum design, assessment practices and teaching delivery strategies (Winberg, 2008). This project aims to identify the barriers that exist to effective teaching and learning in units that have multidisciplinary student cohorts. It will identify the particular needs of students in multidisciplinary student cohorts and determine a teaching and learning model that meets the needs of such cohorts. References Becher, T. & Trowler, P.R. (2001). Academic tribes and territories: Intellectual enquiry and the culture of the discipline. Buckingham, UK: Open University Press. Light, G. & Cox, R. (2001). Learning and teaching in higher education: A reflective professional. Thousand Oaks, CA: Sage. Neumann, R. (2001). Disciplinary differences and university teaching. Studies in Higher Education, 26 (2), 135-46. Neumann, R., Parry, S. & Becher, T. (2002). Teaching and Learning in their disciplinary contexts: A conceptual analysis. Studies in Higher Education, 27(4), 405-417. Taylor, P.G. (1999) Making Sense of Academic Life: Academics, Universities and Change. Buckingham, UK: Open University Press. Winberg, C. (2008). Teaching engineering/engineering teaching: interdisciplinary collaboration and the construction of academic identities. Teaching in Higher Education, 13(3), 353 - 367.

Building information modelling project decision support framework

Building Information Modelling (BIM) is an information technology [IT] enabled approach to managing design data in the AEC/FM (Architecture, Engineering and Construction/ Facilities Management) industry. BIM enables improved interdisciplinary collaboration across distributed teams, intelligent documentation and information retrieval, greater consistency in building data, better conflict detection and enhanced facilities management. Despite the apparent benefits the adoption of BIM in practice has been slow. Workshops with industry focus groups were conducted to identify the industry needs, concerns and expectations from participants who had implemented BIM or were BIM “ready”. Factors inhibiting BIM adoption include lack of training, low business incentives, perception of lack of rewards, technological concerns, industry fragmentation related to uneven ICT adoption practices, contractual matters and resistance to changing current work practice. Successful BIM usage depends on collective adoption of BIM across the different disciplines and support by the client. The relationship of current work practices to future BIM scenarios was identified as an important strategy as the participants believed that BIM cannot be efficiently used with traditional practices and methods. The key to successful implementation is to explore the extent to which current work practices must change. Currently there is a perception that all work practices and processes must adopt and change for effective usage of BIM. It is acknowledged that new roles and responsibilities are emerging and that different parties will lead BIM on different projects. A contingency based approach to the problem of implementation was taken which relies upon integration of BIM project champion, procurement strategy, team capability analysis, commercial software availability/applicability and phase decision making and event analysis. Organizations need to understand: (a) their own work processes and requirements; (b) the range of BIM applications available in the market and their capabilities (c) the potential benefits of different BIM applications and their roles in different phases of the project lifecycle, and (d) collective supply chain adoption capabilities. A framework is proposed to support organizations selection of BIM usage strategies that meet their project requirements. Case studies are being conducted to develop the framework. The results of the preliminary design management case study is presented for contractor led BIM specific to the design and construct procurement strategy.