Catalysing design principles through the dreaming of sustainable subtropical cityscapes : the collaborative construction of new place identities

This paper addresses the question of how to open up pathways and build capacity to facilitate the movement towards sustainable sub-tropical cities. The focus is on outlining a collaborative planning and co-design process that can help catalyse the emergence of sustainable place-habitats and so re-weave and colour anew the tapestry of our sub-tropical cities. Cities are portrayed as self-organising complex adaptive system phenomena, being constantly re-shaped by local and global social-political, environmental, cultural and economic forces as well as planning regimes. While constructing a sustainable city is at essence a design process incorporating new sustainable practices and legislation to reinforce their use, these steps are necessary but not sufficient. Sustainable sub-tropical city-making could be re-thought as a dreaming-re-storying process. This paper explores a new co-design process, which can channel collaborative efforts around re-inventing sustainable place-habitats across the cityscape. A further outcome of this co-design process is the alignment of the emergent design principles and planning actions that can trigger the re-storying of a new sustainable sub-tropical city. Besides a new co-design process, we also advocate the building of sub-tropical city learning networks to facilitate the cross-fertilization for Dreaming sustainable sub-tropical cities.

Synthesis of discrete allyl-functional polyethylene glycol for efficient hydrophilization of dihydr (polydimethylsiloxane)

Amphiphilic poly(ethylene glycol)-block-pol (dimethylsiloxane)-block-poly(ethylene glycol)(PEG-block-PDMS block-PEG) triblock copolymers have been successfully prepared via hydrosilylation using discrete and polydisperse PEG of various chain lengths. Facile synthesis of discrete PEG (dPEG) is achieved via systematic tosylation and etherification of lower glycols. Amphiphilicity of the dPEG block-PDMS-block-dPEG triblock copolymer is illustrated by dynamic light scattering (DLS) and measurement of the critical micelle concentration (CMC).

Investigating homework as a social practice : a qualitative approach

This thesis examines the social practice of homework. It explores how homework is shaped by the discourses, policies and guidelines in circulation in a society at any given time with particular reference to one school district in the province of Newfoundland and Labrador, Canada. This study investigates how contemporary homework reconstitutes the home as a pedagogical site where the power of the institution of schooling circulates regularly from school to home. It examines how the educational system shapes the organization of family life and how family experiences with homework may be different in different sites depending on the accessibility of various forms of cultural capital. This study employs a qualitative approach, incorporating multiple case studies, and is complemented by insights from institutional ethnography and critical discourse analysis. It draws on the theoretical concepts of Foucault including power and power relations, and governmentality and surveillance, as well as Bourdieu’s concepts of economic, social and cultural capital for analysis. It employs concepts from Bourdieu’s work as they have been expanded on by researchers including Reay (1998), Lareau (2000), and Griffith and Smith (2005). The studies of these researchers allowed for an examination of homework as it related to families and mothers’ work. Smith’s (1987; 1999) concepts of ruling relations, mothers’ unpaid labour, and the engine of inequality were also employed in the analysis. Family interviews with ten volunteer families, teacher focus group sessions with 15 teachers from six schools, homework artefacts, school newsletters, homework brochures, and publicly available assessment and evaluation policy documents from one school district were analyzed. From this analysis key themes emerged and the findings are documented throughout five data analysis chapters. This study shows a change in education in response to a system shaped by standards, accountability and testing. It documents an increased transference of educational responsibility from one educational stakeholder to another. This transference of responsibility shifts downward until it eventually reaches the family in the form of homework and educational activities. Texts in the form of brochures and newsletters, sent home from school, make available to parents specific subject positions that act as instruments of normalization. These subject positions promote a particular ‘ideal’ family that has access to certain types of cultural capital needed to meet the school’s expectations. However, the study shows that these resources are not equally available to all and some families struggle to obtain what is necessary to complete educational activities in the home. The increase in transference of educational work from the school to the home results in greater work for parents, particularly mothers. As well, consideration is given to mother’s role in homework and how, in turn, classroom instructional practices are sometimes dependent on the work completed at home with differential effects for children. This study confirms previous findings that it is mothers who assume the greatest role in the educational trajectory of their children. An important finding in this research is that it is not only middle-class mothers who dedicate extensive time working hard to ensure their children’s educational success; working-class mothers also make substantial contributions of time and resources to their children’s education. The assignments and educational activities distributed as homework require parents’ knowledge of technical school pedagogy to help their children. Much of the homework being sent home from schools is in the area of literacy, particularly reading, but requires parents to do more than read with children. A key finding is that the practices of parents are changing and being reconfigured by the expectations of schools in regard to reading. Parents are now being required to monitor and supervise children’s reading, as well as help children complete reading logs, written reading responses, and follow up questions. The reality of family life as discussed by the participants in this study does not match the ‘ideal’ as portrayed in the educational documents. Homework sessions often create frustrations and tensions between parents and children. Some of the greatest struggles for families were created by mathematical homework, homework for those enrolled in the French Immersion program, and the work required to complete Literature, Heritage and Science Fair projects. Even when institutionalized and objectified capital was readily available, many families still encountered struggles when trying to carry out the assigned educational tasks. This thesis argues that homework and education-related activities play out differently in different homes. Consideration of this significance may assist educators to better understand and appreciate the vast difference in families and the ways in which each family can contribute to their children’s educational trajectory.

Estimating the effects of ambient temperature on mortality : methodological challenges and proposed solutions

The health impacts of exposure to ambient temperature have been drawing increasing attention from the environmental health research community, government, society, industries, and the public. Case-crossover and time series models are most commonly used to examine the effects of ambient temperature on mortality. However, some key methodological issues remain to be addressed. For example, few studies have used spatiotemporal models to assess the effects of spatial temperatures on mortality. Few studies have used a case-crossover design to examine the delayed (distributed lag) and non-linear relationship between temperature and mortality. Also, little evidence is available on the effects of temperature changes on mortality, and on differences in heat-related mortality over time. This thesis aimed to address the following research questions: 1. How to combine case-crossover design and distributed lag non-linear models? 2. Is there any significant difference in effect estimates between time series and spatiotemporal models? 3. How to assess the effects of temperature changes between neighbouring days on mortality? 4. Is there any change in temperature effects on mortality over time? To combine the case-crossover design and distributed lag non-linear model, datasets including deaths, and weather conditions (minimum temperature, mean temperature, maximum temperature, and relative humidity), and air pollution were acquired from Tianjin China, for the years 2005 to 2007. I demonstrated how to combine the case-crossover design with a distributed lag non-linear model. This allows the case-crossover design to estimate the non-linear and delayed effects of temperature whilst controlling for seasonality. There was consistent U-shaped relationship between temperature and mortality. Cold effects were delayed by 3 days, and persisted for 10 days. Hot effects were acute and lasted for three days, and were followed by mortality displacement for non-accidental, cardiopulmonary, and cardiovascular deaths. Mean temperature was a better predictor of mortality (based on model fit) than maximum or minimum temperature. It is still unclear whether spatiotemporal models using spatial temperature exposure produce better estimates of mortality risk compared with time series models that use a single site’s temperature or averaged temperature from a network of sites. Daily mortality data were obtained from 163 locations across Brisbane city, Australia from 2000 to 2004. Ordinary kriging was used to interpolate spatial temperatures across the city based on 19 monitoring sites. A spatiotemporal model was used to examine the impact of spatial temperature on mortality. A time series model was used to assess the effects of single site’s temperature, and averaged temperature from 3 monitoring sites on mortality. Squared Pearson scaled residuals were used to check the model fit. The results of this study show that even though spatiotemporal models gave a better model fit than time series models, spatiotemporal and time series models gave similar effect estimates. Time series analyses using temperature recorded from a single monitoring site or average temperature of multiple sites were equally good at estimating the association between temperature and mortality as compared with a spatiotemporal model. A time series Poisson regression model was used to estimate the association between temperature change and mortality in summer in Brisbane, Australia during 1996–2004 and Los Angeles, United States during 1987–2000. Temperature change was calculated by the current day's mean temperature minus the previous day's mean. In Brisbane, a drop of more than 3 �C in temperature between days was associated with relative risks (RRs) of 1.16 (95% confidence interval (CI): 1.02, 1.31) for non-external mortality (NEM), 1.19 (95% CI: 1.00, 1.41) for NEM in females, and 1.44 (95% CI: 1.10, 1.89) for NEM aged 65.74 years. An increase of more than 3 �C was associated with RRs of 1.35 (95% CI: 1.03, 1.77) for cardiovascular mortality and 1.67 (95% CI: 1.15, 2.43) for people aged < 65 years. In Los Angeles, only a drop of more than 3 �C was significantly associated with RRs of 1.13 (95% CI: 1.05, 1.22) for total NEM, 1.25 (95% CI: 1.13, 1.39) for cardiovascular mortality, and 1.25 (95% CI: 1.14, 1.39) for people aged . 75 years. In both cities, there were joint effects of temperature change and mean temperature on NEM. A change in temperature of more than 3 �C, whether positive or negative, has an adverse impact on mortality even after controlling for mean temperature. I examined the variation in the effects of high temperatures on elderly mortality (age . 75 years) by year, city and region for 83 large US cities between 1987 and 2000. High temperature days were defined as two or more consecutive days with temperatures above the 90th percentile for each city during each warm season (May 1 to September 30). The mortality risk for high temperatures was decomposed into: a "main effect" due to high temperatures using a distributed lag non-linear function, and an "added effect" due to consecutive high temperature days. I pooled yearly effects across regions and overall effects at both regional and national levels. The effects of high temperature (both main and added effects) on elderly mortality varied greatly by year, city and region. The years with higher heat-related mortality were often followed by those with relatively lower mortality. Understanding this variability in the effects of high temperatures is important for the development of heat-warning systems. In conclusion, this thesis makes contribution in several aspects. Case-crossover design was combined with distribute lag non-linear model to assess the effects of temperature on mortality in Tianjin. This makes the case-crossover design flexibly estimate the non-linear and delayed effects of temperature. Both extreme cold and high temperatures increased the risk of mortality in Tianjin. Time series model using single site’s temperature or averaged temperature from some sites can be used to examine the effects of temperature on mortality. Temperature change (no matter significant temperature drop or great temperature increase) increases the risk of mortality. The high temperature effect on mortality is highly variable from year to year.

Study of structural changes of pumpkin tissue before and after mechanical loading

The texture of agricultural crops changes during harvesting, post harvesting and processing stages due to different loading processes. There are different source of loading that deform agricultural crop tissues and these include impact, compression, and tension. Scanning Electron Microscope (SEM) method is a common way of analysing cellular changes of materials before and after these loading operations. This paper examines the structural changes of pumpkin peel and flesh tissues under mechanical loading. Compression and indentation tests were performed on peel and flesh samples. Samples structure were then fixed and dehydrated in order to capture the cellular changes under SEM. The results were compared with the images of normal peel and flesh tissues. The findings suggest that normal flesh tissue had bigger size cells, while the cellular arrangement of peel was smaller. Structural damage was clearly observed in tissue structure after compression and indentation. However, the damages that resulted from the flat end indenter was much more severe than that from the spherical end indenter and compression test. An integrated deformed tissue layer was observed in compressed tissue, while the indentation tests shaped a deformed area under the indenter and left the rest of the tissue unharmed. There was an obvious broken layer of cells on the walls of the hole after the flat end indentations, whereas the spherical indenter created a squashed layer all around the hole. Furthermore, the influence of loading was lower on peel samples in comparison with the flesh samples. The experiments have shown that the rate of damage on tissue under constant rate of loading is highly dependent on the shape of equipment. This fact and observed structural changes after loading underline the significance of deigning post harvesting equipments to reduce the rate of damage on agricultural crop tissues.

How to achieve maximum charge carrier loading on heteroatom-substituted graphene nanoribbon edges: density functional theory study

The practical number of charge carriers loaded is crucial to the evaluation of the capacity performance of carbon-based electrodes in service, and cannot be easily addressed experimentally. In this paper, we report a density functional theory study of charge carrier adsorption onto zigzag edge-shaped graphene nanoribbons (ZGNRs), both pristine and incorporating edge substitution with boron, nitrogen or oxygen atoms. All edge substitutions are found to be energetically favorable, especially in oxidized environments. The maximal loading of protons onto the substituted ZGNR edges obeys a rule of [8-n-1], where n is the number of valence electrons of the edge-site atom constituting the adsorption site. Hence, a maximum charge loading is achieved with boron substitution. This result correlates in a transparent manner with the electronic structure characteristics of the edge atom. The boron edge atom, characterized by the most empty p band, facilitates more than the other substitutional cases the accommodation of valence electrons transferred from the ribbon, induced by adsorption of protons. This result not only further confirms the possibility of enhancing charge storage performance of carbon-based electrochemical devices through chemical functionalization but also, more importantly, provides the physical rationale for further design strategies.

Phylodynamic analysis of the emergence and epidemiological impact of transmissible defective dengue viruses

Intra-host sequence data from RNA viruses have revealed the ubiquity of defective viruses in natural viral populations, sometimes at surprisingly high frequency. Although defective viruses have long been known to laboratory virologists, their relevance in clinical and epidemiological settings has not been established. The discovery of long-term transmission of a defective lineage of dengue virus type 1 (DENV-1) in Myanmar, first seen in 2001, raised important questions about the emergence of transmissible defective viruses and their role in viral epidemiology. By combining phylogenetic analyses and dynamical modelling, we investigate how evolutionary and ecological processes at the intra-host and inter-host scales shaped the emergence and spread of the defective DENV-1 lineage. We show that this lineage of defective viruses emerged between June 1998 and February 2001, and that the defective virus was transmitted primarily through co-transmission with the functional virus to uninfected individuals. We provide evidence that, surprisingly, this co-transmission route has a higher transmission potential than transmission of functional dengue viruses alone. Consequently, we predict that the defective lineage should increase overall incidence of dengue infection, which could account for the historically high dengue incidence reported in Myanmar in 2001-2002. Our results show the unappreciated potential for defective viruses to impact the epidemiology of human pathogens, possibly by modifying the virulence-transmissibility trade-off, or to emerge as circulating infections in their own right. They also demonstrate that interactions between viral variants, such as complementation, can open new pathways to viral emergence.

The artful life story : the oral history interview as fiction

This practice-led PhD project consists of two parts. The first is an exegesis documenting how a fiction writer can enter a dialogue with the oral history project in Australia. I identify two philosophical mandates of the oral history project in Australia that have shaped my creative practice: an emphasis on the analysis of the interviewee’s subjective experience as a means of understanding the past, and the desire to engage a wide audience in order to promote empathy towards the subject. The discussion around fiction in the oral history project is in its infancy. In order to deepen the debate, I draw on the more mature discussion in ethnographic fiction. I rely on literary theorists Steven Greenblatt, Dorrit Cohn and Gerard Genette to develop a clear understanding of the distinct narrative qualities of fiction, in order to explore how fiction can re-present and explore an interviewee’s subjective experience, and engage a wide readership. I document my own methodology for producing a work of fiction that is enriched by oral history methodology and theory, and responds to the mandates of the project. I demonstrate the means by which fiction and the oral history project can enter a dialogue in the truest sense of the word: a two-way conversation that enriches and augments practice in both fields. The second part of the PhD is a novel, set in Brisbane and based on oral history interviews and archival material I gathered over the course of the project. The novel centres on Brisbane artist Evelyn, who has been given an impossible task: a derelict old house is about to be demolished, and she must capture its history in a sculpture that will be built on the site. Evelyn struggles to come up with ideas and create the sculpture, realising that she has no way to discover who inhabited the house. What follows is a series of stories, each set in a different era in Brisbane’s history, which take the reader backwards through the house’s history. Hidden Objects is a novel about the impossibility of grasping the past and the powerful pull of storytelling. The novel is an experiment in a hybrid form and is accompanied by an appendix that identifies the historically accurate sources informing the fiction. The decisions about the aesthetics of the novel were a direct result of my engagement with the mandates of the oral history project in Australia. The novel was shortlisted in the 2012 Queensland Literary Awards, unpublished manuscript category.

Development of optimal designs of insulated rail joints

Proper functioning of Insulated Rail Joints (IRJs) is essential for the safe operation of the railway signalling systems and broken rail identification circuitries. The Conventional IRJ (CIRJ) resembles structural butt joints consisting of two pieces of rails connected together through two joint bars on either side of their web and the assembly is held together through pre-tensioned bolts. As the IRJs should maintain electrical insulation between the two rails, a gap between the rail ends must be retained at all times and all metal contacting surfaces should be electrically isolated from each other using non-conductive material. At the gap, the rail ends lose longitudinal continuity and hence the vertical sections of the rail ends are often severely damaged, especially at the railhead, due to the passage of wheels compared to other continuously welded rail sections. Fundamentally, the reason for the severe damage can be related to the singularities of the wheel-rail contact pressure and the railhead stress. No new generation designs that have emerged in the market to date have focussed on this fundamental; they only have provided attention to either the higher strength materials or the thickness of the sections of various components of the IRJs. In this thesis a novel method of shape optimisation of the railhead is developed to eliminate the pressure and stress singularities through changes to the original sharp corner shaped railhead into an arc profile in the longitudinal direction. The optimal shape of the longitudinal railhead profile has been determined using three nongradient methods in search of accuracy and efficiency: (1) Grid Search Method; (2) Genetic Algorithm Method and (3) Hybrid Genetic Algorithm Method. All these methods have been coupled with a parametric finite element formulation for the evaluation of the objective function for each iteration or generation depending on the search algorithm employed. The optimal shape derived from these optimisation methods is termed as Stress Minimised Railhead (SMRH) in this thesis. This optimal SMRH design has exhibited significantly reduced stress concentration that remains well below the yield strength of the head hardened rail steels and has shifted the stress concentration location away from the critical zone of the railhead end. The reduction in the magnitude and the relocation of the stress concentration in the SMRH design has been validated through a full scale wheel – railhead interaction test rig; Railhead strains under the loaded wheels have been recorded using a non-contact digital image correlation method. Experimental study has confirmed the accuracy of the numerical predications. Although the SMRH shaped IRJs eliminate stress singularities, they can still fail due to joint bar or bolt hole cracking; therefore, another conceptual design, termed as Embedded IRJ (EIRJ) in this thesis, with no joint bars and pre-tensioned bolts has been developed using a multi-objective optimisation formulation based on the coupled genetic algorithm – parametric finite element method. To achieve the required structural stiffness for the safe passage of the loaded wheels, the rails were embedded into the concrete of the post tensioned sleepers; the optimal solutions for the design of the EIRJ is shown to simplify the design through the elimination of the complex interactions and failure modes of the various structural components of the CIRJ. The practical applicability of the optimal shapes SMRH and EIRJ is demonstrated through two illustrative examples, termed as improved designs (IMD1 & IMD2) in this thesis; IMD1 is a combination of the CIRJ and the SMRH designs, whilst IMD2 is a combination of the EIRJ and SMRH designs. These two improved designs have been simulated for two key operating (speed and wagon load) and design (wheel diameter) parameters that affect the wheel-rail contact; the effect of these parameters has been found to be negligible to the performance of the two improved designs and the improved designs are in turn found far superior to the current designs of the CIRJs in terms of stress singularities and deformation under the passage of the loaded wheels. Therefore, these improved designs are expected to provide longer service life in relation to the CIRJs.

(Re)-regulating care : employing foreign carers for older persons in Taiwan

The purpose of this research was to develop a theoretical understanding of the social phenomenon of the employment of foreign carers for older Taiwanese in households. Foreign carers were introduced into Taiwan in 1992 to address the care needs of the older population. By 2012, over 200,000 foreign caregivers from Indonesia, Philippines, and Vietnam were providing care in households in Taiwan. There has been little research on the interactions between and experiences of family employers, foreign carers and older persons receiving care. The theoretical framework brought together symbolic interactionist concepts and the social constructionism of Berger and Luckmann. Data collection and analysis were informed by Charmaz‘s formulation of grounded theory. Two focus groups and 54 in-depth interviews with a total of 57 Indonesian and Vietnamese foreign carers, Taiwanese family employers and older persons receiving care were undertaken. The analytical findings of the research reflect the ways in which the foreign carer, older persons receiving care and family employer participants were socially situated within the research context and how their respective social realities were shaped differently by changing social structures and cultural values within a globalising context. (Re)-regulating care was generated as the core category, forming a coherent and overarching framework that integrated the three analytical dimensions of the reality of the social change, resituating roles and struggling for control. The reality of social change refers to the employment of foreign carers as a manifestation of the reshaping of the social worlds of the three groups of participants. Resituating roles reflects the processes that underpin the hierarchical positioning of participants, the resultant asymmetrical power relations and associated interactions. Struggling for control, depicts how each group employed strategies to create space and identities that would sustain a sense of self and autonomy. In the current situation of economic and social change in Taiwan the three participant groups shared a desire for control. The autonomy of the women employers was negotiated through employment of foreign carers; for the foreign carers, a pragmatic decision to work abroad became a means for personal empowerment; and the older persons receiving care regained some authority through relationships with carers.

First-principle studies of electronic structure and C-doping effect in boron nitride nanoribbon

Structural and electronic properties have been studied for Boron Nitride nanoribbons (BNNR) with both zigzag and armchair shaped edge (Z-BNNR and A-BNNR) by first-principle spin-polarized total energy calculations. We found that the energy band gap of Z-BNNR is indirect and decreases monotonically with the increasing ribbon width, whereas direct energy band gap oscillation was observed for A-BNNRs. Additionally, C-substitution at either single boron or nitrogen atom site in BNNRs could induce spontaneous magnetization. Our results could be potentially useful to design magnetic nano-devices based on BNNRs.

Socio-Spatial Approaches To Literacy Studies: Rethinking the Social Constitution and Politics of Space

Literacy studies have begun to examine the spatial dimension of literacy practices in a way that foregrounds space, and that considers space as constitutive to human relations and practices. This chapter provides an introduction to spatial literacy research, providing a guide to key theorists, themes, and studies that have shaped historical and new developments in spatial approaches to literacy practice and pedagogy. It begins by reconceptualising socio-spatial approaches to literacy research and defines terms. Intersections with related social theories are examined, with an emphasis on critical approaches and the politics of space. It clarifies the relationship between socio-spatial and socio-cultural paradigms, revisiting the spatial in seminal socio-cultural research. It covers new ground,including networks, flows, and deterritorialisation of literacy practice. The chapter concludes with challenges and recommendations for future language research and educational practice.

Introducing Masculinity Studies to Information Systems research : the case of Gaydar

I believe that studies of men's gendered experiences of information systems are needed. In order to support this claim, I introduce the area of Masculinity Studies to Information Systems research and, using this, present an exploratory analysis of an internet dating website for gay men – Gaydar. The information system, which forms part of the Gaydar community, is shown to shape, and be shaped by the members as they accept and challenge aspects of it as related to their identities. In doing this, I show how the intertwined processes of information systems development and use contribute to the creation of diverse interpretations of masculinity within a group of men. In sum, my analysis highlights different kinds of men and different versions of masculinity that can sometimes be associated with different experiences of information systems. The implications of this work centre on the need to expand our knowledge of men's gendered experiences with information systems, to reflect upon processes of technology facilitated categorisation and to consider the influences that contribute to the roll out of particular software features along with the underlying rationales for market segmentation in the software and software-based services industries.

Going offline : An exploratory cultural artifact analysis of an internet dating site's development trajectories

In this study we develop a theorization of an Internet dating site as a cultural artifact. The site, Gaydar, is targeted at gay men. We argue that contemporary received representations of their sexuality figure heavily in the site’s focus by providing a cultural logic for the apparent ad hoc development trajectories of its varied commercial and non-­‐commercial services. More specifically, we suggest that the growing sets of services related to the website are heavily enmeshed within current social practices and meanings. These practices and meanings are, in turn, shaped by the interactions and preferences of a variety of diverse groups involved in what is routinely seen within the mainstream literature as a singularly specific sexuality and cultural project. Thus, we attend to two areas – the influence of the various social engagements associated with Gaydar together with the further extension of its trajectory ‘beyond the web’. Through the case of Gaydar, we contribute a study that recognizes the need for attention to sexuality in information systems research and one which illustrates sexuality as a pivotal aspect of culture. We also draw from anthropology to theorize ICTs as cultural artifacts and provide insights into the contemporary phenomena of ICT enabled social networking.

40 years of cancer nursing in Australia : the emergence of a specialty

Over the past 40 years, the nature and scope of cancer nursing practice has been shaped to a large extent by scientific and medical advances, as well as by social, economic and political factors. Nurses’ role in cancer care has evolved from being predominantly functional and dependent in its approach to being a specialty with clearly defined standards of practice underpinned by a growing evidence base and an agreed set of professional performance capabilities. The unique contribution that nurses make to minimising the effects of cancer on a person’s life and improving the patient experience is now well established and Australian cancer nurses are recognised as leaders in the field internationally. Nurses have achieved improved outcomes for people affected by cancer as part of a multidisciplinary team. By being active participants in the Clinical Oncological Society of Australia for at least 30 of the organisation’s 40 year history, Australian cancer nurses have been provided unique opportunities for professional development and inter-professional collaboration. To meet future challenges in delivering quality cancer care, cancer nurses will need to be full partners with consumers and with other health professionals in redesigning health care systems that are more responsive to changes in social, demographic, scientific and technological contexts.