Accessibility of pores in coal to methane and carbon dioxide

Fluid–solid interactions in natural and engineered porous solids underlie a variety of technological processes, including geological storage of anthropogenic greenhouse gases, enhanced coal bed methane recovery, membrane separation, and heterogeneous catalysis. The size, distribution and interconnectivity of pores, the chemical and physical properties of the solid and fluid phases collectively dictate how fluid molecules migrate into and through the micro- and meso-porous media, adsorb and ultimately react with the solid surfaces. Due to the high penetration power and relatively short wavelength of neutrons, smallangle neutron scattering (SANS) as well as ultra small-angle scattering (USANS) techniques are ideally suited for assessing the phase behavior of confined fluids under pressure as well as for evaluating the total porosity in engineered and natural porous systems including coal. Here we demonstrate that SANS and USANS can be also used for determining the fraction of the pore volume that is actually accessible to fluids as a function of pore sizes and study the fraction of inaccessible pores as a function of pore size in three coals from the Illinois Basin (USA) and Bowen Basin (Australia). Experiments were performed at CO2 and methane pressures up to 780 bar, including pressures corresponding to zero average contrast condition (ZAC), which is the pressure where no scattering from the accessible pores occurs. Scattering curves at the ZAC were compared with the scattering from same coals under vacuum and analysed using a newly developed approach that shows that the volume fraction of accessible pores in these coals varies between �90% in the macropore region to �30% in the mesopore region and the variation is distinctive for each of the examined coals. The developed methodology may be also applied for assessing the volume of accessible pores in other natural underground formations of interest for CO2 sequestration, such as saline aquifers as well as for estimating closed porosity in engineered porous solids of technological importance.

High pressure in situ diffraction studies of metal–hydrogen systems

“Hybrid” hydrogen storage, where hydrogen is stored in both the solid material and as a high pressure gas in the void volume of the tank can improve overall system efficiency by up to 50% compared to either compressed hydrogen or solid materials alone. Thermodynamically, high equilibrium hydrogen pressures in metal–hydrogen systems correspond to low enthalpies of hydrogen absorption–desorption. This decreases the calorimetric effects of the hydride formation–decomposition processes which can assist in achieving high rates of heat exchange during hydrogen loading—removing the bottleneck in achieving low charging times and improving overall hydrogen storage efficiency of large hydrogen stores. Two systems with hydrogenation enthalpies close to −20 kJ/mol H2 were studied to investigate the hydrogenation mechanism and kinetics: CeNi5–D2 and ZrFe2−xAlx (x = 0.02; 0.04; 0.20)–D2. The structure of the intermetallics and their hydrides were studied by in situ neutron powder diffraction at pressures up to 1000 bar and complementary X-ray diffraction. The deuteration of the hexagonal CeNi5 intermetallic resulted in CeNi5D6.3 with a volume expansion of 30.1%. Deuterium absorption filled three different types of interstices, Ce2Ni2 and Ni4 tetrahedra, and Ce2Ni3 half-octahedra and was accompanied by a valence change for Ce. Significant hysteresis was observed between deuterium absorption and desorption which profoundly decreased on a second absorption cycle. For the Al-modified Laves-type C15 ZrFe2−xAlx intermetallics, deuteration showed very fast kinetics of H/D exchange and resulted in a volume increase of the FCC unit cells of 23.5% for ZrFe1.98Al0.02D2.9(1). Deuterium content, hysteresis of H/D uptake and release, unit cell expansion and stability of the hydrides systematically change with the amount of Al content. In the deuteride D atoms exclusively occupy the Zr2(Fe,Al)2 tetrahedra. Observed interatomic distances are Zr–D = 1.98–2.11; (Fe, Al)–D = 1.70–1.75A˚ . Hydrogenation slightly increases the magnetic moment of the Fe atoms in ZrFe1.98Al0.02 and ZrFe1.96Al0.04 from 1.9 �B at room temperature for the alloy to 2.2 �B for its deuteride.

Nanostructured metal hydrides for hydrogen storage studied by in situ synchrotron and neutron diffraction

This work was focused on studies of the metal hydride materials having a potential in building hydrogen storage systems with high gravimetric and volumetric efficiencies of H storage and formed / decomposed with high rates of hydrogen exchange. In situ diffraction studies of the metal-hydrogen systems were explored as a valuable tool in probing both the mechanism of the phase-structural transformations and their kinetics. Two complementary techniques, namely Neutron Powder Diffraction (NPD) and Synchrotron X-ray diffraction (SR XRD) were utilised. High pressure in situ NPD studies were performed at D2 pressures reaching 1000 bar at the D1B diffractometer accommodated at Institute Laue Langevin, Grenoble. The data of the time resolved in situ SR XRD were collected at the Swiss Norwegian Beam Lines, ESRF, Grenoble in the pressure range up to 50 bar H2 at temperatures 20-400°C. The systems studied by NPD at high pressures included deuterated Al-modified Laves-type C15 ZrFe2-xAlx intermetallics with x = 0.02; 0.04 and 0.20 and the CeNi5-D2 system. D content, hysteresis of H uptake and release, unit cell expansion and stability of the hydrides systematically change with Al content. Deuteration exhibited a very fast kinetics; it resulted in increase of the unit cells volumes reaching 23.5 % for ZrFe1.98Al0.02D2.9(1) and associated with exclusive occupancy of the Zr2(Fe,Al)2 tetrahedra. For CeNi5 deuteration yielded a hexahydride CeNi5D6.2 (20°C, 776 bar D2) and was accompanied by a nearly isotropic volume expansion reaching 30.1% (∆a/a=10.0%; ∆c/c=7.5%). Deuterium atoms fill three different interstitial sites including Ce2Ni2, Ce2Ni3 and Ni4. Significant hysteresis was observed on the first absorption-desorption cycle. This hysteresis decreased on the absorption-desorption cycling. A different approach to the development of H storage systems is based on the hydrides of light elements, first of all the Mg-based ones. These systems were studied by SR XRD. Reactive ball milling in hydrogen (HRBM) allowed synthesis of the nanostructured Mg-based hydrides. The experimental parameters (PH2, T, energy of milling, ball / sample ratio and balls size), significantly influence rate of hydrogenation. The studies confirmed (a) a completeness of hydrogenation of Mg into MgH2; (b) indicated a partial transformation of the originally formed -MgH2 into a metastable -MgH2 (a ratio / was 3/1); (c) yielded the crystallite size for the main hydrogenation product, -MgH2, as close to 10 nm. Influence of the additives to Mg on the structure and hydrogen absorption/desorption properties and cycle behaviour of the composites was established and will be discussed in the paper.

Small angle X-ray scattering mapping and kinetics study of sub-critical CO2 sorption by two Australian coals

Time- and position-resolved synchrotron small angle X-ray scattering data were acquired from samples of two Australian coal seams: Bulli seam (Bulli 4, Ro=1.42%, Sydney Basin), which naturally contains CO2 and Baralaba seam (Ro=0.67%, Bowen Basin), a potential candidate for sequestering CO2. This experimental approach has provided unique, pore-size-specific insights into the kinetics of CO2 sorption in the micro- and small mesopores (diameter 5 to 175 Å) and the density of the sorbed CO2 at reservoir-like conditions of temperature and hydrostatic pressure. For both samples, at pressures above 5 bar, the density of CO2 confined in pores was found to be uniform, with no densification in near-wall regions. In the Bulli 4 sample, CO2 first flooded the slit pores between polyaromatic sheets. In the pore-size range analysed, the confined CO2 density was close to that of the free CO2. The kinetics data are too noisy for reliable quantitative analysis, but qualitatively indicate faster kinetics in mineral-matter-rich regions. In the Baralaba sample, CO2 preferentially invaded the smallest micropores and the confined CO2 density was up to five times that of the free CO2. Faster CO2 sorption kinetics was found to be correlated with higher mineral matter content but, the mineral-matter-rich regions had lower-density CO2 confined in their pores. Remarkably, the kinetics was pore-size dependent, being faster for smaller pores. These results suggest that injection into the permeable section of an interbedded coal-clastic sequence could provide a viable combination of reasonable injectivity and high sorption capacity.

Wind pressure measurements on a cube subjected to pulsed impinging jet flow

A pulsed impinging jet is used to simulate the gust front of a thunderstorm downburst. This work concentrates on investigating the peak transient loading conditions on a 30 mm cubic model submerged in the simulated downburst flow. The outflow induced pressures are recorded and compared to those from boundary layer and steady wall jet flow. Given that peak winds associated with downburst events are often located in the transient frontal region, the importance of using a non-stationary modelling technique for assessing peak downburst wind loads is highlighted with comparisons.

Swine flu, doctors and pandemics : Is there a duty to treat during a pandemic?

The swine influenza (H1N1) outbreak in 2009 highlighted the ethical and legal pressures facing general practitioners and health workers in emergency departments in determining the nature and limits of their obligations to their patients and the public. Health workers require guidance on the multiple, overlapping, and at times conflicting legal and ethical duties owed to patients and prospective patients, employers and fellow health workers, and their families. Existing sources of advice on these issues in Australia, by way of statements of medical ethics and other sources of advice, are shown to be in need of further amplification if health workers are to be provided with the certainty and guidance required. Given the complexity of the issues, Australia would therefore benefit from more extensive consultation with the variety of stakeholders involved in these questions if pandemic plans are to smoothly deal with future crises in an ethically and legally sound manner.

Hormone resistance, invasiveness, and metastatic potential in breast cancer

Critical phenotypic changes that occur during the progression of breast cancer include the loss of hormone-dependence, acquired resistance to systemic therapies, and increased metastatic potential. We have isolated a series of MCF-7 human breast cancer variants which exhibit hormone-independent growth, antiestrogen resistance, and increased metastatic potential. Analysis of the phenotypes of these variants strongly suggests that changes in the expression of specific genes may be critical to the generation of phenotypic diversity in the process of malignant progression in breast cancer. Epigenetic changes may contribute significantly to the generation of these phenotypic changes observed during breast cancer progression. Many of the characteristics of the progressed phenotypes appear to have arisen in response to appropriate selective pressures (growth in ovariectomized nude mice; growth in the presence of antiestrogens). These observations are consistent with the concept of clonal selection and expansion in the process of malignant progression.

Considering research enquiry into biophilic urbanism and office worker productivity

In cities, people spend a significant portion of their time indoors, much of which is in office buildings. The quality and nature of these spaces have the potential to be a strong determinant of people’s health and wellbeing. There is a body of evidence that suggests experiences of nature increase the rate of attention recovery, reduce stress, depression and anxiety, and increase cognitive abilities. Further, the presence of nature inside buildings (such as pot plants and internal green walls) can improve indoor air quality, potentially reducing illness and increasing cognitive function. Urban design that integrates nature into the built environment to provide these benefits, among others, is called ‘biophilic urbanism’ and is the subject of growing international interest and research. The potential for these benefits to increase worker productivity in office buildings is of particular interest, as this could significantly increase the financial performance of office building-based organisations. However, productivity is a complex concept that is difficult to define, and affected by a multitude of factors, which make it difficult to measure. This inability to quantify productivity increases from investments in nature- experiences in office buildings is currently a significant barrier to such investments. Within this context, this paper considers opportunities for research to explore the relationship between office-based nature experiences and productivity, by reviewing existing research in this field and reflecting on the authors’ own experiences. This review has a particular focus on the importance of quantifying this link in order to encourage private property owners to voluntarily integrate nature into buildings to provide city-wide ecosystem service benefits. The paper begins with a contextual overview of how biophilic urbanism can potentially increase worker productivity. Existing methods of measuring and evaluating the performance of biophilic urbanism within the context of office buildings are then explored, along with a discussion of issues with such methods that are currently limiting investment in biophilic urbanism to increase worker productivity and wellbeing. This includes a summary of a survey within a Perth office building to explore the impact of views of nature through a window. Drawing on these insights, the paper makes recommendations regarding opportunities for focusing future investigations to enhance understanding of how biophilic urbanism can contribute to increased wellbeing and productivity in office buildings. This paper builds on work conducted as part of the Sustainable Built Environment National Research Centre Project 1.5, Harnessing the Potential of Biophilic Urbanism in Australia, which considered the role of nature integrated into the built environment in responding to emerging challenges of climate change, resource shortages and population pressures, while providing a host of co- benefits to a range of stakeholders.

Considering research enquiry into biophilic urbanism and office worker productivity

In cities, people spend a significant portion of their time indoors, much of which is in office buildings. The quality and nature of these spaces have the potential to be a strong determinant of people’s health and wellbeing. There is a body of evidence that suggests experiences of nature increase the rate of attention recovery, reduce stress, depression and anxiety, and increase cognitive abilities. Further, the presence of nature inside buildings (such as pot plants and internal green walls) can improve indoor air quality, potentially reducing illness and increasing cognitive function. Urban design that integrates nature into the built environment to provide these benefits, among others, is called ‘biophilic urbanism’ and is the subject of growing international interest and research. The potential for these benefits to increase worker productivity in office buildings is of particular interest, as this could significantly increase the financial performance of office building-based organisations. However, productivity is a complex concept that is difficult to define, and affected by a multitude of factors, which make it difficult to measure. This inability to quantify productivity increases from investments in nature- experiences in office buildings is currently a significant barrier to such investments. Within this context, this paper considers opportunities for research to explore the relationship between office-based nature experiences and productivity, by reviewing existing research in this field and reflecting on the authors’ own experiences. This review has a particular focus on the importance of quantifying this link in order to encourage private property owners to voluntarily integrate nature into buildings to provide city-wide ecosystem service benefits. The paper begins with a contextual overview of how biophilic urbanism can potentially increase worker productivity. Existing methods of measuring and evaluating the performance of biophilic urbanism within the context of office buildings are then explored, along with a discussion of issues with such methods that are currently limiting investment in biophilic urbanism to increase worker productivity and wellbeing. This includes a summary of a survey within a Perth office building to explore the impact of views of nature through a window. Drawing on these insights, the paper makes recommendations regarding opportunities for focusing future investigations to enhance understanding of how biophilic urbanism can contribute to increased wellbeing and productivity in office buildings. This paper builds on work conducted as part of the Sustainable Built Environment National Research Centre Project 1.5, Harnessing the Potential of Biophilic Urbanism in Australia, which considered the role of nature integrated into the built environment in responding to emerging challenges of climate change, resource shortages and population pressures, while providing a host of co- benefits to a range of stakeholders.

Building capacity for 21st century engineering through curriculum renewal

At the 2012 CDIO conference, it was clear to all that engineering for 21st Century challenges and opportunities will be critical to the success of society over the next 2-3 decades, in dealing with pressures including climate change, resource depletion and urban densification. Within this context there is a growing imperative for rapid curriculum renewal towards education for sustainable development across all types and disciplines of engineering education, around the world. Building on a paper presented by these authors at the 2012 CDIO conference, this 2013 roundtable will draw on participants’ experiences to discuss how sustainability knowledge and skills can be embedded within a CDIO-based program using a holistic approach to curriculum renewal. The highly interactive and dynamic session will include two parts: 1) a short presentation from the chairs of the roundtable on an emergent model for rapid curriculum renewal; and 2) a facilitated discussion with participants about challenges and opportunities for action. Session notes will be recorded for distribution among participants following the conference.

Pressure state response-based method for evaluating social benefits from smart grid development

In this paper, the inherent mechanism of social benefits associated with smart grid development is examined based on the pressure state response (PSR) model from resource economics. The emerging types of technology brought up by smart grid development are regarded as pressures. The improvements of the performance and efficiency of power system operation, such as the enhanced capability of accommodating renewable energy generation, are regarded as states. The effects of smart grid development on society are regarded as responses. Then, a novel method for evaluating social benefits from smart grid development is presented. Finally, the social benefits from smart grid development in a province in northwest China are carried out by using the developed evaluation system, and reasonable evaluation results are attained.

A protocol for a pragmatic randomized controlled trial evaluating outcomes of emergency nurse practitioner service

Aim To evaluate emergency nurse practitioner service effectiveness on outcomes related to quality of care and service responsiveness. Background Increasing service pressures in the emergency setting have resulted in the adoption of service innovation models; the most common and rapidly expanding of these is the emergency nurse practitioner. The delivery of high quality patient care in the emergency department is one of the most important service indicators to be measured in health services today. The rapid uptake of emergency nurse practitioner service in Australia has outpaced the capacity to evaluate this model in outcomes related to safety and quality of patient care. Design Pragmatic randomized controlled trial at one site with 260 participants. Methods This protocol describes a definitive prospective randomized controlled trial, which will examine the impact of emergency nurse practitioner service on key patient care and service indicators. The study control will be standard emergency department care. The intervention will be emergency nurse practitioner service. The primary outcome measure is pain score reduction and time to analgesia. Secondary outcome measures are waiting time, number of patients who did not wait, length of stay in the emergency department and representations within 48 hours. Discussion Scant research enquiry evaluating emergency nurse practitioner service on patient effectiveness and service responsiveness exists currently. This study is a unique trial that will test the effectiveness of the emergency nurse practitioner service on patients who present to the emergency department with pain. The research will provide an opportunity to further evaluate emergency nurse practitioner models of care and build research capacity into the workforce.

Resource Curse or Cure?: On the Sustainability of Development in Western Australia

Addresses often unanswered questions about the costs and benefits of resource-based development The first book to offer a suitably comprehensive critique of Western Australia's development path Provides a multi-facetted perspective thanks to its truly cross-disciplinary and cross-institutional authorship Globalisation and rapid social and environmental change in recent decades have brought into sharper focus not only the benefits but also the costs of economic development. The once assumed link between economic development and societal well-being is being increasingly questioned in the face of growing social and environmental problems and unfulfilled expectations concerning political and commercial decision-makers. The orthodox development dogma is being tested in particular in resource-based economies such as Western Australia, where globalisation pressures and the concomitant rise in the demand for natural resources highlight the difficulties of effectively balancing broader societal interests with those of industry and the state. This book provides a critical review of the socio-political, environmental and cultural state of play in Western Australia, offering an analysis of how resource-based developments are shaping the state and its people.

Lung recruitment and endotracheal suction in ventilated preterm infants measured with electrical impedance tomography

Aims Although suctioning is a standard airway maintenance procedure, there are significant associated risks, such as loss of lung volume due to high negative suction pressures. This study aims to assess the extent and duration of change in end-expiratory level (EEL) resulting from endotracheal tube (ETT) suction and to examine the relationship between EEL and regional lung ventilation in ventilated preterm infants with respiratory distress syndrome. Methods A prospective observational clinical study of the effect of ETT suction on 20 non-muscle-relaxed preterm infants with respiratory distress syndrome (RDS) on conventional mechanical ventilation was conducted in a neonatal intensive care unit. Ventilation distribution was measured with regional impedance amplitudes and EEL using electrical impedance tomography. Results ETT suction resulted in a significant increase in EEL post-suction (P < 0.01). Regionally, anterior EEL decreased and posterior EEL increased post-suction, suggesting heterogeneity. Tidal volume was significantly lower in volume-guarantee ventilation compared with pressure-controlled ventilation (P = 0.04). Conclusions ETT suction in non-muscle-relaxed and ventilated preterm infants with RDS results in significant lung volume increase that is maintained for at least 90 min. Regional differences in distribution of ventilation with ETT suction suggest that the behaviour of the lung is heterogeneous in nature.

Estimating present day extreme total water level exceedance probabilities around the Australian coastline

The occurrence of extreme water level events along low-lying, highly populated and/or developed coastlines can lead to devastating impacts on coastal infrastructure. Therefore it is very important that the probabilities of extreme water levels are accurately evaluated to inform flood and coastal management and for future planning. The aim of this study was to provide estimates of present day extreme total water level exceedance probabilities around the whole coastline of Australia, arising from combinations of mean sea level, astronomical tide and storm surges generated by both extra-tropical and tropical storms, but exclusive of surface gravity waves. The study has been undertaken in two main stages. In the first stage, a high-resolution (~10 km along the coast) hydrodynamic depth averaged model has been configured for the whole coastline of Australia using the Danish Hydraulics Institute’s Mike21 modelling suite of tools. The model has been forced with astronomical tidal levels, derived from the TPX07.2 global tidal model, and meteorological fields, from the US National Center for Environmental Prediction’s global reanalysis, to generate a 61-year (1949 to 2009) hindcast of water levels. This model output has been validated against measurements from 30 tide gauge sites around Australia with long records. At each of the model grid points located around the coast, time series of annual maxima and the several highest water levels for each year were derived from the multi-decadal water level hindcast and have been fitted to extreme value distributions to estimate exceedance probabilities. Stage 1 provided a reliable estimate of the present day total water level exceedance probabilities around southern Australia, which is mainly impacted by extra-tropical storms. However, as the meteorological fields used to force the hydrodynamic model only weakly include the effects of tropical cyclones the resultant water levels exceedance probabilities were underestimated around western, northern and north-eastern Australia at higher return periods. Even if the resolution of the meteorological forcing was adequate to represent tropical cyclone-induced surges, multi-decadal periods yielded insufficient instances of tropical cyclones to enable the use of traditional extreme value extrapolation techniques. Therefore, in the second stage of the study, a statistical model of tropical cyclone tracks and central pressures was developed using histroic observations. This model was then used to generate synthetic events that represented 10,000 years of cyclone activity for the Australia region, with characteristics based on the observed tropical cyclones over the last ~40 years. Wind and pressure fields, derived from these synthetic events using analytical profile models, were used to drive the hydrodynamic model to predict the associated storm surge response. A random time period was chosen, during the tropical cyclone season, and astronomical tidal forcing for this period was included to account for non-linear interactions between the tidal and surge components. For each model grid point around the coast, annual maximum total levels for these synthetic events were calculated and these were used to estimate exceedance probabilities. The exceedance probabilities from stages 1 and 2 were then combined to provide a single estimate of present day extreme water level probabilities around the whole coastline of Australia.