Gender differences in recreational and transport cycling : a cross-sectional mixed-methods comparison of cycling patterns, motivators, and constraints

Background: Gender differences in cycling are well-documented. However, most analyses of gender differences make broad comparisons, with few studies modeling male and female cycling patterns separately for recreational and transport cycling. This modeling is important, in order to improve our efforts to promote cycling to women and men in countries like Australia with low rates of transport cycling. The main aim of this study was to examine gender differences in cycling patterns and in motivators and constraints to cycling, separately for recreational and transport cycling. Methods: Adult members of a Queensland, Australia, community bicycling organization completed an online survey about their cycling patterns; cycling purposes; and personal, social and perceived environmental motivators and constraints (47% response rate). Closed and open-end questions were completed. Using the quantitative data, multivariable linear, logistic and ordinal regression models were used to examine associations between gender and cycling patterns, motivators and constraints. The qualitative data were thematically analysed to expand upon the quantitative findings. Results: In this sample of 1862 bicyclists, men were more likely than women to cycle for recreation and for transport, and they cycled for longer. Most transport cycling was for commuting, with men more likely than women to commute by bicycle. Men were more likely to cycle on-road, and women off-road. However, most men and women did not prefer to cycle on-road without designed bicycle lanes, and qualitative data indicated a strong preference by men and women for bicycle-only off-road paths. Both genders reported personal factors (health and enjoyment related) as motivators for cycling, although women were more likely to agree that other personal, social and environmental factors were also motivating. The main constraints for both genders and both cycling purposes were perceived environmental factors related to traffic conditions, motorist aggression and safety. Women, however, reported more constraints, and were more likely to report as constraints other environmental factors and personal factors. Conclusion: Differences found in men’s and women’s cycling patterns, motivators and constraints should be considered in efforts to promote cycling, particularly in efforts to increase cycling for transport.

Lateral movements in composite high-rise buildings under seismic action

Daring human nature has already led to the construction of high-rise buildings in naturally challenging geological regions and in worse environments of the world. However; literature review divulges that there is a lag in research of certain generic principles and rules for the prediction of lateral movement in multistorey construction. The present competitive trend orders the best possible used of available construction material and resources. Hence; the mixed used of reinforced concrete with structural steel is gaining prevalence day by day. This paper investigates the effects of Seismic load on composite multistorey building provided with core wall and trusses through FEM modelling. The results showed that increased rigidity corresponds to lower period of vibration and hence higher seismic forces. Since Seismic action is a function of mass and response acceleration, therefore; mass increment generate higher earthquake load and thus cause higher impact base shear and overturning movement. Whereas; wind force depends on building exposed, larger the plan dimension greater is the wind impact. Nonetheless; outriggers trusses noticeably contribute, in improving the serviceability of structure subjected to wind and earthquake forces.

Improving remote collaborative process modelling using embodiment in 3D virtual environments

Identifying, modelling and documenting business processes usually require the collaboration of many stakeholders that may be spread across companies in inter-organizational settings. While modern process modelling technologies are beginning to provide a number of features to support remote, they lack support for visual cues used in co-located collaboration. In this paper, we examine the importance of visual cues for collaboration tasks in collaborative process modelling. Based on this analysis, we present a prototype 3D virtual world process modelling tool that supports a number of visual cues to facilitate remote collaborative process model creation and validation. We then report on a preliminary analysis of the technology. In conclusion, we proceed to describe the future direction of our research with regards to the theoretical contributions expected from the evaluation of the tool.

Enabling access to research data in developing countries : designing a policy and practice framework for Malaysia’s Public Research Universities

Members of the World Trade Organisation (WTO) are obliged to implement the Agreement on Trade-related Intellectual Property Rights 1994 (TRIPS) which establishes minimum standards for the protection and enforcement of intellectual property rights. Almost two decades after TRIPS was adopted at the conclusion of the Uruguay Round of trade negotiations, it is widely accepted that intellectual property systems in developing and least-developed countries must be consistent with, and serve, their development needs and objectives. In adopting the Development Agenda in 2007, the World Intellectual Property Organisation (WIPO) emphasised the importance to developing and least-developed countries of being able to obtain access to knowledge and technology and to participate in collaborations and exchanges with research and scientific institutions in other countries. Access to knowledge, information and technology is crucial if creativity and innovation is to be fostered in developing and least-developed countries. It is particularly important that developing and least-developed countries give effect to their TRIPS obligations by implementing intellectual property systems and adopting intellectual property management practices that enable them to benefit from knowledge flows and support their engagement in international research and science collaborations. However, developing and least-developed countries did not participate in the deliberations leading to the adoption in 2004 by Organisation for Economic Co-operation and Development (OECD) member countries of the Ministerial Declaration on Access to Research Data from Public Funding, nor have they formulated policies on access to publicly funded research outputs such as those developed by the National Institutes of Health in the United States, the United Kingdom Research Councils or the Australian National Health and Medical Research Council. These issues are considered from the viewpoint of Malaysia, a developing country whose economy has grown strongly in recent years. Lacking an established policy covering access to the outputs of publicly funded research, data sharing and licensing practices continue to be fragmented. Obtaining access to research data requires arrangements to be negotiated with individual data owners and custodians. Given the potential for restrictions on access to impact negatively on scientific progress and development in Malaysia, measures are required to ensure that access to knowledge and research results is facilitated. This paper proposes a policy framework for Malaysia‘s public research universities that recognises intellectual property rights while enabling the open access to research data that is essential for innovation and development. It also considers how intellectual property rights in research data can be managed in order to give effect to the policy‘s open access objectives.

Principles of Criminal Law in Queensland and Western Australia

Aspires to engage students in the criminal law in Queensland and Western Australia by explaining and applying its fundamental principles. In both these jurisdictions the criminal law stems from the Griffith Code, which was enacted in 1899 in Queensland and in 1913 in Western Australia.

Studies of assisted reproduction in the spotted grass frog Limnodynastes tasmaniensis: ovulation, early development and microinjection (ICSI)

Assisted Reproductive Technologies (ART) offer a wide range of techniques that have the potential to augment efforts to conserve and manage endangered amphibians and improve wild and captive population numbers. Gametes and tissues of species nearing endangered or extinct status can be cryopreserved and stored in gene banks, to provide material that can be utilised in the future as ART methods are refined. The Spotted Grass Frog, Limnodynastes tasmaniensis, is an abundant amphibian species in South-Eastern Australia of the family Myobatrachidae, that is suitable for the development of ART systems that can be applied to the threatened and endangered myobatrachid and other amphibian species native to Australia. The aim of this study was to advance the understanding of ovulation, fertilisation and embryo nic development of Lim. tasmaniensis and in vitro manipulations of reproduction and development for use in the development of advanced ART procedures such as intracytoplasmic spermatozoon injection (ICSI), androgenesis and nuclear transfer. Ovulation in amphibians can be induced by protocols utilising natural or synthetic hormones. All protocols tested on Lim. tasmaniensis in this study required two injections and the most effective protocols continued to require a first injection of pituitary extracts to induce ovulation. The second injection was, however, successfully replaced by synthetic chorionic gonadotrophin at a threshold dosage of 100 iu and halved the number of cane toads required to source the pituitaries. A combination of LHRH and Pimozide offered a less effective protocol, that did not require the use of pituitary extracts, and avoided the risk of pathogen transfer associated with unsterilised pituitary extracts. Unfertilised eggs of Lim. tasmaniensis were exposed to media of various osmolalities to determine media effects on eggs and their surrounding jelly layers that might impact on egg viability and fertilisability. Osmolality had no effect upon the egg diameter, however, rapid swelling of the jelly layers occurred within 15 minutes of exposure to various media treatments and plateaued from 30-90 minutes without further expansion. Swelling of the jelly layers was increased in hypotonic media (2.5% SAR, H2O) and minimised in the isotonic media (100% SAR). The optimal conditions for the culture of Lim. tasmaniensis eggs were identified as a holding media of 100% SAR, followed by a medium change to 2.5% SAR at insemination. This sequence of media minimised the rate of swelling of the jelly layers prior to contact with the spermatozoa, and maximised the activation of spermatozoa and eggs throughout fertilisation and embryonic development. Embryos of Lim. tasmaniensis were cultured at four temperatures (13 C, 17 C, 23 C and 29 C), to determine the effect of temperature on cleavage and embryonic development rates. Embryonic development progressed through a sequence of stages that were not altered by changes in temperature. However cleavage rates were affected by changes in temperature as compared with normal embryonic growth at 23 C. Embryonic development was suspended at the lowest temperature (13 C) while embryonic viability was maintained. A moderate decrease in temperature (17 C) slowed cleavage, while the highest temperature (29 C) increased the cleavage rate, but decreased the embryo survival. Rates of embryonic development can be manipulated by changes in temperature and this method can be used to source blastomeres of a specific size/stage at a predetermined age or halt cleavage at specific stages for embryos or embryo derived cells to be included in ART procedures. This study produced the first report of the application of Intracytoplasmic Spermatozoon Injection (ICSI) in an Australian amphibian. Eggs that were activated by microinjection with a single spermatozoon (n=50) formed more deep, but abnormal, cleavage furrows post-injection (18/50, 36%), than surface changes (12/50, 24%). This result is in contrast to eggs injected without a spermatozoon (n=42), where the majority of eggs displayed limited surface changes (36/42, 86%), and few deep, abnormal furrows (3/42, 7%). Three advanced embryos (3/50, 6%) were produced by ICSI that developed to various stages within the culture system. Technical difficulties were encountered that prevented the generation of any metamorphs from ICSI tadpoles. Nevertheless, when these blocks to ICSI are overcome, the ICSI procedure will be both directly useful as an ART procedure in its own right, and the associated refinement of micromanipulation procedures will assist in the development of other ART procedures in Lim. tasmaniensis. A greater understanding of basic reproductive and developmental biology in Lim. tasmaniensis would greatly facilitate refinement of fertilisation by ICSI. Assisted Reproductive Technologies, in conjunction with gene banks may in the future regenerate extinct amphibian species, and assist in the recovery of declining amphibian populations nationally and worldwide.

Learning and assessment in Australia

Camp Kilda (CK) is regarded as being a quality early childhood center, and has many features you would typically expect to see in settings across Australia. The children are busily engaged in hands-on activity, playing indoors and outdoors, in the sandpit, under the shade of a big mango tree. The learning environment is planned to offer a variety of activities, including dramatic play, climbing equipment, balls, painting, drawing, clay, books, blocks, writing materials, scissors, manipulative materials. The children are free to access all the materials, and they play either individually or in small groups. The teachers encourage and stimulate the children’s learning, through interactions and thoughtful planning. Learning and assessment at CK is embedded within the cultural and social contexts of the children and their community. Children’s learning is made visible through a rich variety of strategies, including recorded observations, work samples, photographs, and other artifacts. Parents are actively encouraged to build on these “stories” of their children. Planning is based around the teachers’ analysis of the information they gather daily as they interact with the children and their families.

CCI-CCI Creative City Index 2012

The CCI-Creative City Index was commissioned in 2010 by the Beijing Academy of Science & Technology's Beijing Research Center for the Science of Science. John Hartley was asked to develop a new creative global city index. The brief was to improve on the existing indexes with a specific focus on creative industries and the sources of creative development. This report, by John Hartley, Jason Potts, Trent MacDonald, with Chris Erkunt and Carl Kufleitner, sets out the new model we have developed, which we call the CCI Creative City Index (CCI-CCI). It presents the results of a pilot application of the index to six cities: London, Cardiff, Berlin, Bremen, Melbourne and Brisbane. The index incorporates many elements from other global and creative city indexes, but also adds several new dimensions relating to creative industries scope, micro-productivity, and the economy of attention. The report and Excel spreadsheets of index calculations can be found on this site.

Assessing Cardiovascular Risk in Regional Areas: The Healthy Hearts – Beyond City Limits Program

Background: Cardiovascular disease (CVD) is more prevalent in regional and remote Australia compared to metropolitan areas. The aim of Healthy Hearts was to determine age and sex specific CVD risk factor levels and the potential value of national risk clinics. Methods: Healthy Hearts was an observational research study conducted in four purposefully selected higher risk communities in regional Victoria, Australia. The main outcome measures were the proportion of participants with CVD risk factors with group comparisons to determine the adjusted likelihood of elevated risk factor levels. Trained personnel used a standardized protocol over four weeks per community to measure CVD risk factor levels, estimate absolute CVD risk and provide feedback and advice. Results: A total of 2125 self-selected participants were assessed (mean age 58 ± 15 years, 57% women). Overall, CVD risk factors were highly prevalent. More men than women had ≥ 2 modifiable CVD risk factors (76% vs. 68%, p < .001), pre-existing CVD (20 vs. 15%, p < .01) and a major ECG abnormality requiring follow-up (15% vs. 7%, p < .001) . Less men reported depressive symptoms compared to women (28% vs. 22%, p < .01). A higher proportion of women were obese (adjusted OR 1.36, 95% CI 1.13 to 1.63), and physically inactive (adjusted OR 1.32, 95% CI 1.07 to 1.63). Conclusions: High CVD risk factor levels were confirmed for regional Victoria. Close engagement with individuals and communities provides scope for the application of regional risk management clinics to reduce the burden of CVD risk in regional Australia.

Weight stigma in maternity care : women's experiences and care providers' attitudes

Background: Weight stigma is pervasive in Western society and in healthcare settings, and has a negative impact on victims’ psychological and physical health. In the context of an increasing focus on the management of overweight and obese women during and after pregnancy in research and clinical practice, the current studies aimed to examine the presence of weight stigma in maternity care. Addressing previous limitations in the weight stigma literature, this paper quantitatively explores the presence of weight stigma from both patient and care provider perspectives. Methods: Study One investigated associations between pre-pregnancy body mass index (BMI) and experiences of maternity care from a state-wide, self-reported survey of 627 Australian women who gave birth in 2009. Study Two involved administration of an online survey to 248 Australian pre-service medical and maternity care providers, to investigate their perceptions of, and attitudes towards, providing care for pregnant patients of differing body sizes. Both studies used linear regression analyses. Results: Women with a higher BMI were more likely to report negative experiences of care during pregnancy and after birth, compared to lower weight women. Pre-service maternity care providers perceived overweight and obese women as having poorer self-management behaviours, and reported less positive attitudes towards caring for overweight or obese pregnant women, than normal weight pregnant women. Even care providers who reported few weight-stigmatising attitudes responded less positively to overweight and obese pregnant women. Conclusions: Overall, these results provide preliminary evidence that weight stigma is present in maternity care settings in Australia. They suggest a need for further research into the nature and consequences of weight stigma in maternity care, and for the inclusion of strategies to recognise and combat weight stigma in maternity care professionals’ training.

Arts-health intersections : a model of practice for consistency in the arts-health sector

The field of Arts-Health practice and research has grown exponentially in the past 30 years. While researchers are using applied arts as the subject of investigation in research, the evaluation of practice and participant benefits has a limited general focus. In recent years, the field has witnessed a growing concentration on the evaluation of health outcomes, outputs and tangential benefits for participants engaging in Arts-Health practice. The wide range of methodological approaches applied arts practitioners implement make the field difficult to define. This article introduces the term Arts-Health intersections as a model of practice and framework to promote consistency in design, implementation and evaluative processes in applied arts programmes promoting health outcomes. The article challenges the current trend to solely evaluate health outcomes in the field, and promotes a concurrent and multidisciplinary methodological approach that can be adopted to promote evaluation, consistency and best practice in the field of Arts-Health intersections. The article provides a theoretical overview of Arts-Health intersections, and then takes this theoretical platform and details a best model of practice for developing Arts-Health intersections and presents this model as a guide.

Library research support in Queensland : a survey

University libraries worldwide are reconceptualising the ways in which they support the research agenda in their respective institutions. This paper is based on a survey completed by member libraries of the Queensland University Libraries Office of Cooperation (QUL OC), the findings of which may be informative for other university libraries. After briefly examining major emerging trends in research support, the paper discusses the results of the survey specifically focussing on support for researchers and the research agenda in their institutions. All responding libraries offer a high level of research support, however, eResearch support, in general, and research data management support, in particular, have the highest variance among the libraries, and signal possible areas for growth. Areas for follow-up, benchmarking and development are suggested.

Research data finder : an institutional metadata repository

QUT’s new metadata repository (data registry), Research Data Finder, has been designed to promote the visibility and discoverability of QUT research datasets. Funded by the Australian National Data Service (ANDS), it will provide a qualitative snapshot of research data outputs created or collected by members of the QUT research community that are available via open or mediated access. As a fully integrated metadata repository Research Data Finder aligns with institutional sources of truth, such as QUT’s research administrative system, ResearchMaster, as well as QUT’s Academic Profiles system to provide high quality data descriptions that increase awareness of, and access to, shareable research data. In addition, the repository and its workflows are designed to foster smoother data management practices, enhance opportunities for collaboration and research, promote cross-disciplinary research and maximize existing research datasets. The metadata schema used in Research Data Finder is the Registry Interchange Format - Collections and Services (RIF-CS), developed by ANDS in 2009. This comprehensive schema is potentially complex for researchers; unlike metadata for publications, which are often made publicly available with the official publication, metadata for datasets are not typically available and need to be created. Research Data Finder uses a hybrid self-deposit and mediated deposit system. In addition to automated ingests from ResearchMaster (research project information) and Academic Profiles system (researcher information), shareable data is identified at a number of key “trigger points” in the research cycle. These include: research grant proposals; ethics applications; Data Management Plans; Liaison Librarian data interviews; and thesis submissions. These ingested records can be supplemented with related metadata including links to related publications, such as those in QUT ePrints. Records deposited in Research Data Finder are harvested by ANDS and made available to a national and international audience via Research Data Australia, ANDS’ discovery service for Australian research data. Researcher and research group metadata records are also harvested by the National Library of Australia (NLA) and these records are then published in Trove (the NLA’s digital information portal). By contributing records to the national infrastructure, QUT data will become more visible. Within Australia and internationally, many funding bodies have already mandated the open access of publications produced from publicly funded research projects, such as those supported by the Australian Research Council (ARC), or the National Health and Medical Research Council (NHMRC). QUT will be well placed to respond to the rapidly evolving climate of research data management. This project is supported by the Australian National Data Service (ANDS). ANDS is supported by the Australian Government through the National Collaborative Research Infrastructure Strategy Program and the Education Investment Fund (EIF) Super Science Initiative.

Consumer product-related injuries in Queensland children : A snapshot of current problem areas for potential action

This report presents a snapshot from work which was funded by the Queensland Injury Prevention Council in 2010-11 titled “Feasibility of Using Health Data Sources to Inform Product Safety Surveillance in Queensland children”. The project provided an evaluation of the current available evidence-base for identification and surveillance of product-related injuries in children in Queensland and Australia. A comprehensive 300 page report was produced (available at: http://eprints.qut.edu.au/46518/) and a series of recommendations were made which proposed: improvements in the product safety data system, increased utilisation of health data for proactive and reactive surveillance, enhanced collaboration between the health sector and the product safety sector, and improved ability of health data to meet the needs of product safety surveillance. At the conclusion of the project, a Consumer Product Injury Research Advisory group (CPIRAG) was established as a working party to the Queensland Injury Prevention Council (QIPC), to prioritise and advance these recommendations and to work collaboratively with key stakeholders to promote the role of injury data to support product safety policy decisions at the Queensland and national level. This group continues to meet monthly and is comprised of the organisations represented on the second page of this report. One of the key priorities of the CPIRAG group for 2012 was to produce a snapshot report to highlight problem areas for potential action arising out of the larger report. Subsequent funding to write this snapshot report was provided by the Institute for Health and Biomedical Innovation, Injury Prevention and Rehabilitation Domain at QUT in 2012. This work was undertaken by Dr Kirsten McKenzie and researchers from QUT's Centre for Accident Research and Road Safety - Queensland. This snapshot report provides an evidence base for potential further action on a range of children’s products that are significantly represented in injury data. Further information regarding injury hazards, safety advice and regulatory responses are available on the Office of Fair Trading (OFT) Queensland website and the Product Safety Australia websites. Links to these resources are provided for each product reviewed.

State of multilevel research perspective in the information systems discipline

Existing distinctions among macro and micro approaches have been jeopardising the advances of Information Systems (IS) research. Both approaches have been criticized for explaining one level while neglecting the other; thereby, the current situation necessitates the application of multilevel research for revealing the deficiencies. Instead of studying single level (macro or micro), multilevel research entails more than one level of conceptualization and analysis, simultaneously. As the notion of multilevel is borrowed from reference disciplines, there tends to be confusions and inconsistencies within the IS discipline, which hinders the adoption of multilevel research. This paper speaks for the potential value of multilevel research, by investigating the current application status of multilevel research within the IS domain. A content analysis of multilevel research articles from major IS conferences and journals is presented. Analysis results suggest that IS scholars have applied multilevel research to produce high quality work ranging from a variety of topics. However, researchers have not yet been consistently defining “multilevel”, leading to idiosyncratic meanings of multilevel research, most often, in authors’ own interpretations. We argue that a rigorous definition of “multilevel research” needs to be explicated for consistencies in research community.