Accelerometer based performance assessment of basic routines in classical ballet

Classical ballet requires dancers to exercise significant muscle control and strength both while stationary and when moving. Following the Royal Academy of Dance (RAD) syllabus, 8 male and 27 female dancers (aged 20.2 + 1.9 yr) in a fulltime university undergraduate dance training program were asked to stand in first position for 10 seconds and then perform 10 repeats of a demi-plié exercise to a counted rhythm. Accelerometer records from the wrist, sacrum, knee and ankle were compared with the numerical scores from a professional dance instructor. The sacrum mounted sensor detected lateral tilts of the torso in dances with lower scores (Spearman’s rank correlation coefficient r = -0.64, p < 0.005). The RMS acceleration amplitude of wrist mounted sensor was linearly correlated to the movement scores (Spearman’s rank correlation coefficient r = 0.63, p < 0.005). The application of sacrum and wrist mounted sensors for biofeedback during dance training is a realistic, low cost option.

Macrophonics II

Macrophonics II presents new Australian work emerging from the leading edge of performance interface research. The program addresses the emerging dialogue between traditional media and emerging digital media, as well as dialogues across a broad range of musical traditions. Recent technological developments are causing a complete reevaluation of the relationships between media and genres in art, and Macrophonics II presents a cross-section of responses to this situation. Works in the program foreground an approach to performance that integrates sensors with novel performance control devices, and/or examine how machines can be made musical in performance. The program presents works by Australian artists Donna Hewitt, Julian Knowles and Wade Marynowsky, with choreography by Avril Huddy and dance performance by Lizzie and Zaimon Vilmanis. From sensor-based microphones and guitars, through performance a/v, to post-rock dronescapes, movement inspired works and experimental electronica, Macrophonics II provides a broad and engaging survey of new performance approaches in mediatised environments. Initial R&D for the work was supported by a range of institutions internationally, including the Australia Council for the Arts, Arts Queensland, STEIM (Holland) and the Nes Artist Residency (Iceland).

Suedehead

An original work by New York-based choreographer Jodi Melnick performed in the Irish Museum of Modern Art. A dance for four. Four individual solos, often seen intersecting, interrupting, invading one another. Coming and going. How to be coming and going at the same time. Starting with a working process with an openness to the performers and their beautiful, sometimes jarring, one step at a time, bird by bird. It has to be like that. A devised choreography that incorporates the creative input of the cast of dancers to produce an original work.

Solo3

Solo3 is and evening of solo works collaboratively created by Jenny Roche and choreographers John Jasperse (US), Jodi Melnick (US) and Liz Roche (Ireland). It was commissioned by the Dublin Dance Festival 2008 for the culmination of Jenny Roche's residency as an artist with the festival. The three works address the role of the dancer as co-creator within choreographic practice and further examine how the dancer can inhabit multiple embodiments across various choreographies leading to a plurality of selfhood in line with post-modern and poststructuralist notions of subjectivity (Deleuze and Guattari 1987). Furthermore, the oscillation of real and imagined subjectivities in performance (Emilyn Claid 2006) and the interplay of intercorporeal and intersubjective relations between choreographer and dancer (Sally Gardner 2007) are highlighted in these works.

Altered copy

In 2008, Jenny Roche commissioned Jodi Melnick to make the solo Business of the Bloom on her. Four years later, Roche re-enters this piece and draws on their many years of working together to inhabits its ideas and impulses from a new perspective. In this new 'altered copy', Roche refers to this previous work; embellishing, redirecting and abstracting moments. By reinterpreting both her earlier self and footage of Melnick dancing a reworked version of the solo in performance, Roche connects with the polyvalent nature of both interpretation and memory. This reworked version outlines the relationship that dancers have to movement traces that circulate after a dancing event. Suzanne Ravn (2009) found that dancers experienced the reapperance of movement traces from previous works when moving. Martin Nachbar (2012) writing from his first-person perspective as a dancer, describes the dancer who discerns between the past of movement that is remembered and the current moment of its performance. He outlines how past and present movement experiences cohabitate in the embodied present. Timmy de Laet (2012) identifies the emerging trait of re-enactment in contemporary dance, in which contemporary artists such as Nachbar dialogue with past choreographies to comment on the various mnemonic dimensions of dance. De Laet (2012) explains that the function of these works are not to preserve the past choreographies as might be achieved through reconstruction but to contemplate creatively issues of ephemerality and preservation of dance. Altered copy addresses this dialogue between the past and present body.

Boundary swaying

This practice-led research is positioned within my ongoing enquiry into the dancer’s experience and role within the creative process. Gins and Arakawa (1997) and Keane (2007) speak to the unsatisfactory reliance on discipline boundaries, to describe the dynamic lived-experience of interaction. This theorising is of application to this project, which examines creative agency through the lens of Arakawa and Gins’ language prompt, boundary-swaying. In this project the boundaries of movement creator, performer and director overlap and blur through the use of improvisation and multiple cameras. All contributors are invested creatively and compositionally in the ensuing dynamic collaboration, wearing many hats, ‘conceiver, creative thinker, teacher and learner’ (McKechnie 2005, 93; Stevens & McKechnie 2005, 250). This project asked the question, how can the work of Arakawa and Gins to agitate, disrupt, and transform the modus operandi of creative practice between choreographer and practice, dancer and practice and choreographer and dancer? The use of Arakawa and Gins’ philosophy and language prompts within this project stimulated and positively influenced the established creative relationship of researcher and choreographer/artist in the following ways: • Foregrounded the dancers tacit knowledge, first-hand experience, know-how and embodied savviness; • Promoted artistic collaboration, illuminating new creative possibilities, choices and innovation; • Facilitated the distribution of creative authority and agency. This creative work was presented as part of the AG3 ONLINE: the Third International Arakawa and Gins - Architecture and Philosophy Conference. The work was vetted for inclusion by an international panel of examiners.

Experience has no shadow

This research is situated in the field of practice-led research investigating embodied perspectives on the performance of dance making. In the stock of choreographic literature, the celebrated ‘creativity’ label is associated predominantly with the choreographer and is discussed in terms of product rather than process (Lussier-Ley and Durand-Bush 2009; Hennessey 2003). A reliance on the mystery of inspiration or choreographic genius (Penty 1998) for the production of ‘great’ dance works does not acknowledge the complex and timely process common in the creation of dance (Mace and Ward 2002) nor provide a true representation of the creative contributors (Farrer 2014). The failure to attribute creative impulses and skills to dancers is reminiscent of a time when they were thought of only as instruments in the creative process not active participants and collaborators (Jowitt 2001a; H’Doubler 1957). This project asked the question, to what end do dancers contribute to choreography and how is this contribution valued and recognised? Dancers are integral to the creative process. The research found that the scope of a dancers’ creative involvement in the development of a new work is dependent on: the individual choreographers approach to creating movement; the relationship between dancer and choreographer, and dancer and fellow company members; and the dancers collaborative skills and interpretive skills, versatility, and initiative. Recognition and attribution of dancers’ creative input is dependent on a choreographer’s viewpoint, generosity, and prior creative experiences. The work was created as a part of the Ausdance Queensland 2010 Bell Tower III Choreographic Residency program. Applicants were peer reviewed and vetted by a panel of local and national dance producers. The creative work was presented at the Judith Wright Centre for Live Arts. The project was funded by Ausdance Queensland and Arts Queensland. https://es-es.facebook.com/events/106661226023025/?hc_location=stream

Endurance test-rig for diagnostics and prognostics of rolling element bearings

Detection of faults in roller element bearing is a topic widely discussed in the scientific field. Bearings diagnostics is usually performed by analyzing experimental signals, almost always vibration signals, measured during operation. A number of signal processing techniques have been proposed and applied to measured vibrations. The diagnostic effectiveness of the techniques depends on their capacities and on the environmental conditions (i.e. environmental noise). The current trend, especially from an industrial point of view, is to couple the prognostics to the diagnostics. The realization of a prognostic procedure require the definition of parameters able to describe the bearing condition during its operation. Monitoring the values of these parameters during time allows to define their trends depending on the progress of the wear. In this way, a relation between the variation of the selected parameters and the wear progress, useful for diagnostics and prognostics of bearings in real industrial applications, can be established. In this paper, a laboratory test-rig designed to perform endurance tests on roller element bearing is presented. Since the test-rig has operated for a short time, only some preliminary available results are discussed.

An experimental based assessment of the deviation of the bearing characteristic frequencies

Slippage in the contact roller-races has always played a central role in the field of diagnostics of rolling element bearings. Due to this phenomenon, vibrations triggered by a localized damage are not strictly periodic and therefore not detectable by means of common spectral functions as power spectral density or discrete Fourier transform. Due to the strong second order cyclostationary component, characterizing these signals, techniques such as cyclic coherence, its integrated form and square envelope spectrum have proven to be effective in a wide range of applications. An expert user can easily identify a damage and its location within the bearing components by looking for particular patterns of peaks in the output of the selected cyclostationary tool. These peaks will be found in the neighborhood of specific frequencies, that can be calculated in advance as functions of the geometrical features of the bearing itself. Unfortunately the non-periodicity of the vibration signal is not the only consequence of the slippage: often it also involves a displacement of the damage characteristic peaks from the theoretically expected frequencies. This issue becomes particularly important in the attempt to develop highly automated algorithms for bearing damage recognition, and, in order to correctly set thresholds and tolerances, a quantitative description of the magnitude of the above mentioned deviations is needed. This paper is aimed at identifying the dependency of the deviations on the different operating conditions. This has been possible thanks to an extended experimental activity performed on a full scale bearing test rig, able to reproduce realistically the operating and environmental conditions typical of an industrial high power electric motor and gearbox. The importance of load will be investigated in detail for different bearing damages. Finally some guidelines on how to cope with such deviations will be given, accordingly to the expertise obtained in the experimental activity.

Tuning second order cyclostationarity parameters for the diagnostics of rolling element bearings

Failures on rolling element bearings usually originate from cracks that are detectable even in their early stage of propogation by properly analyzing vibration signals measured in the proximity of the bearing. Due to micro-slipping in the roller-races contact, damage-induced vibration signals belong to the family of quasi-periodic signals with a strong second order cyclostationary component. Cyclic coherence and its integrated form are widely considered as the most suitable tools for bearing fault diagnostics and their theoretical bases have been already consolidated. This paper presents how to correctly set the parameters of the cyclostationary analysis tool to be implemented in an automatable algorithm. In the first part of the paper some general guidelines are provided for the specific application. These considerations are further verified, applying cyclostationary tools to data collected in an experimental campaign on a specific test-rig.

Measuring, modelling and understanding the mechanical behavior of bagasse

In the Australian sugar industry, sugar cane is smashed into a straw like material by hammers before being squeezed between large rollers to extract the sugar juice. The straw like material is initially called prepared cane and then bagasse as it passes through successive roller milling units. The sugar cane materials are highly compressible, have high moisture content, are fibrous, and they resemble some peat soils in both appearance and mechanical behaviour. A promising avenue to improve the performance of milling units for increased throughput and juice extraction, and to reduce costs is by modelling of the crushing process. To achieve this, it is believed necessary that milling models should be able to reproduce measured bagasse behaviour. This investigation sought to measure the mechanical (compression, shear, and volume) behaviour of prepared cane and bagasse, to identify limitations in currently used material models, and to progress towards a material model that can predict bagasse behaviour adequately. Tests were carried out using a modified direct shear test equipment and procedure at most of the large range of pressures occurring in the crushing process. The investigation included an assessment of the performance of the direct shear test for measuring bagasse behaviour. The assessment was carried out using finite element modelling. It was shown that prepared cane and bagasse exhibited critical state behavior similar to that of soils and the magnitudes of material parameters were determined. The measurements were used to identify desirable features for a bagasse material model. It was shown that currently used material models had major limitations for reproducing bagasse behaviour. A model from the soil mechanics literature was modified and shown to achieve improved reproduction while using magnitudes of material parameters that better reflected the measured values. Finally, a typical three roller mill pressure feeder configuration was modelled. The predictions and limitations were assessed by comparison to measured data from a sugar factory.

Postmodern Theory and the Choreography of Michael Clark

This study addresses two interrelated questions: Can postmodern ‘theory’ illuminate an understanding of Michael Clark’s work? and, a sub-question, In which ways, if at all, does Clark’s work demonstrate a postmodern sensibility? Chapter one, the introduction to this study, provides a ‘portrait’ of postmodernism, that is, it addresses the question What is postmodernism? Chapter two is a biography of Michael Clark. The seminal sections to this study, however, are chapters three and four. Here the author blends a discussion of a) subject matter, treatment and meanings in Clark’s choreography, b) journalistic criticisms of those features of his work, and c) postmodern theory. The outcome of these chapters is to demonstrate that Clark’s works do indeed require re-interpretation and re-evaluation, and to illustrate how these factors might be achieved.

Space within the surface : the patterned surfaces of Florence Broadhurst and Jim Thompson

The Woods Bagot 2007 refurbishment of the Qantas and British Airways Bangkok Business lounge in the Survarnabhumi Airport features wall finishes designed by wallpaper designer, Florence Broadhurst (1899-1977) and Thai Silk trader, Jim Thompson (1906-1967). This distinctive selection, which is proclaimed on the airport’s website, of patterned wall surfaces side by side draws attention to their striking similarities and their defining differences . Thompson and Broadhurst would appear to be worlds apart, but here in the airport their work brings them together. Thompson, the son of a wealthy cotton family in America, worked as an architect before joining the army. He moved to Bangkok to start The Thai Silk Company in 1948. Broadhurst was born on a farm in Mt. Perry, Queensland. She began her career as a performance artist, as part of an Australian troupe in Shanghai, moving onto pursue a career in fashion design, catering to the middle and upper classes in London. Upon her return to Australia, Broadhurst started a print design company in 1959. Both Broadhurst and Thompson pursued multiple careers, lived many lives, and died under mysterious circumstances. Broadhurst was murdered in 1977 at her Sydney print warehouse, which remains an unsolved crime. Thompson disappeared in Malaysia in 1967 and his body has never been found. This chapter investigates the parallels between Thompson and Broadhurst and what lead them to design such popular patterns for wall surfaces towards the end of their careers. While neither designer was a household name, their work is familiar to most, seen in the costume and set design of films, on the walls of restaurants and cafes and even in family homes. The reason for the popularity of their patterns has not previously been analysed. However, this chapter suggests that the patterns are intriguing because they contain something of their designers’ identities. It suggests that the coloured surface provides a way of camouflaging and hiding its subjects’ histories, such that Broadhurst and Thompson, consciously or unconsciously, used the patterned surface as a plane in which their past lives could be buried. The revealing nature of the stark white wall, compared with the forgiveness provided by the pattern in which to hide, is elaborated by painter and advocate for polychromatic architecture, Fernand Léger in his essay, “The Wall, The Architect, The Painter (1965).” Léger writes that, “the modern architect has gone too far in his magnificent attempts to cleanse through emptiness,” and that the resultant white walls of modernity create ‘an impalpability of air, of slick, brilliant new surfaces where nothing can be hidden any longer …even shadows don’t dare to enter’. To counter the exposure produced by the white wall, Thompson and Broadhurst designed patterned surfaces that could harbour their personal histories. Broadhurst and Thompson’s works share a number of commonalities in their design production, even though their work in print design commenced a decade apart. Both designers opted to work more with traditional methods of pattern making. Broadhurst used hand-operated screens, and Thompson outsourced work to local weavers and refrained from operating out of a factory. Despite humble beginnings, Broadhurst and Thompson enjoyed international success with their wall patterns being featured in a number of renowned international hotels in Bahrain, Singapore, Sydney, and London in the 1970s and 1980s. Their patterns were also transferred to fabric for soft furnishings and clothing. Thompson’s patterns were used for costumes in films including the King and I and Ben Hur. Broadhurst’s patterns were also widely used by fashion designers and artists, such as Akira Isogowa‘s costume design for Salome, a 1998 production by the Sydney Dance Company. Most recently her print designs have been used by skin illustrator Emma Hack, in a series of works painting female bodies into Broadhurst’s patterns. Hack’s works camouflage the models’ bodies into the patterned surface, assimilating subject and surface, hinting at there being something living within the patterned wall. More than four decades after Broadhurst’s murder and five decades since Thompson’s disappearance, their print designs persist as more than just a legacy. They are applied as surface finishes with the same fervour as when the designs were first released. This chapter argues that the reason for the ongoing celebration of their work is that there is the impalpable presence of the creator in the patterns. It suggests that the patterns blur the boundary between subject and surface.

Writing Indigenous vampires: Aboriginal gothic or Aboriginal fantastic?

The usual postmodern suspicions about diligently deciphering authorial intent or stridently seeking fixed meaning/s and/or binary distinctions in an artistic work aside, this self-indulgent essay pushes the boundaries regarding normative academic research, for it focusses on my own (minimally celebrated) published creative writing’s status as a literary innovation. Dedicated to illuminating some of the less common denominators at play in Australian horror, my paper recalls the creative writing process involved when I set upon the (arrogant?) goal of creating a new genre of creative writing: that of the ‘Aboriginal Fantastic’. I compare my work to the literary output of a small but significant group (2.5% of the population), of which I am a member: Aboriginal Australians. I narrow my focus even further by examining that creative writing known as Aboriginal horror. And I reduce the sample size of my study to an exceptionally small number by restricting my view to one type of Aboriginal horror literature only: the Aboriginal vampire novel, a genre to which I have contributed professionally with the 2011 paperback and 2012 e-book publication of That Blackfella Bloodsucka Dance! However, as this paper hopefully demonstrates, and despite what may be interpreted by some cynical commentators as the faux sincerity of my taxonomic fervour, Aboriginal horror is a genre noteworthy for its instability and worthy of further academic interrogation. (first paragraph)