The microwell-mesh: A novel device and protocol for the high throughput manufacturing of cartilage microtissues

Microwell platforms are frequently described for the efficient and uniform manufacture of 3-dimensional (3D) multicellular microtissues. Multiple partial or complete medium exchanges can displace microtissues from discrete microwells, and this can result in either the loss of microtissues from culture, or microtissue amalgamation when displaced microtissues fall into common microwells. Herein we describe the first microwell platform that incorporates a mesh to retain microtissues within discrete microwells; the microwell-mesh. We show that bonding a nylon mesh with an appropriate pore size over the microwell openings allows single cells to pass through the mesh into the microwells during the seeding process, but subsequently retains assembled microtissues within discrete microwells. To demonstrate the utility of this platform, we used the microwell-mesh to manufacture hundreds of cartilage microtissues, each formed from 5 × 10(3) bone marrow-derived mesenchymal stem/stromal cells (MSC). The microwell-mesh enabled reliable microtissue retention over 21-day cultures that included multiple full medium exchanges. Cartilage-like matrix formation was more rapid and homogeneous in microtissues than in conventional large diameter control cartilage pellets formed from 2 × 10(5) MSC each. The microwell-mesh platform offers an elegant mechanism to retain microtissues in microwells, and we believe that this improvement will make this platform useful in 3D culture protocols that require multiple medium exchanges, such as those that mimic specific developmental processes or complex sequential drug exposures.

Intravascular device administration sets: Replacement after standard versus prolonged use in hospitalised patients--a study protocol for a randomised controlled trial (The RSVP Trial)

Introduction Vascular access devices (VADs), such as peripheral or central venous catheters, are vital across all medical and surgical specialties. To allow therapy or haemodynamic monitoring, VADs frequently require administration sets (AS) composed of infusion tubing, fluid containers, pressure-monitoring transducers and/or burettes. While VADs are replaced only when necessary, AS are routinely replaced every 3–4 days in the belief that this reduces infectious complications. Strong evidence supports AS use up to 4 days, but there is less evidence for AS use beyond 4 days. AS replacement twice weekly increases hospital costs and workload. Methods and analysis This is a pragmatic, multicentre, randomised controlled trial (RCT) of equivalence design comparing AS replacement at 4 (control) versus 7 (experimental) days. Randomisation is stratified by site and device, centrally allocated and concealed until enrolment. 6554 adult/paediatric patients with a central venous catheter, peripherally inserted central catheter or peripheral arterial catheter will be enrolled over 4 years. The primary outcome is VAD-related bloodstream infection (BSI) and secondary outcomes are VAD colonisation, AS colonisation, all-cause BSI, all-cause mortality, number of AS per patient, VAD time in situ and costs. Relative incidence rates of VAD-BSI per 100 devices and hazard rates per 1000 device days (95% CIs) will summarise the impact of 7-day relative to 4-day AS use and test equivalence. Kaplan-Meier survival curves (with log rank Mantel-Cox test) will compare VAD-BSI over time. Appropriate parametric or non-parametric techniques will be used to compare secondary end points. p Values of <0.05 will be considered significant.

Assessment of antenna characteristic effects on pedestrian and cyclists travel-time estimation based on Bluetooth and WiFi MAC addresses

Monitoring pedestrian and cyclists movement is an important area of research in transport, crowd safety, urban design and human behaviour assessment areas. Media Access Control (MAC) address data has been recently used as potential information for extracting features from people’s movement. MAC addresses are unique identifiers of WiFi and Bluetooth wireless technologies in smart electronics devices such as mobile phones, laptops and tablets. The unique number of each WiFi and Bluetooth MAC address can be captured and stored by MAC address scanners. MAC addresses data in fact allows for unannounced, non-participatory, and tracking of people. The use of MAC data for tracking people has been focused recently for applying in mass events, shopping centres, airports, train stations etc. In terms of travel time estimation, setting up a scanner with a big value of antenna’s gain is usually recommended for highways and main roads to track vehicle’s movements, whereas big gains can have some drawbacks in case of pedestrian and cyclists. Pedestrian and cyclists mainly move in built distinctions and city pathways where there is significant noises from other fixed WiFi and Bluetooth. Big antenna’s gains will cover wide areas that results in scanning more samples from pedestrians and cyclists’ MAC device. However, anomalies (such fixed devices) may be captured that increase the complexity and processing time of data analysis. On the other hand, small gain antennas will have lesser anomalies in the data but at the cost of lower overall sample size of pedestrian and cyclist’s data. This paper studies the effect of antenna characteristics on MAC address data in terms of travel-time estimation for pedestrians and cyclists. The results of the empirical case study compare the effects of small and big antenna gains in order to suggest optimal set up for increasing the accuracy of pedestrians and cyclists’ travel-time estimation.

Multifunctional three-dimensional T-junction graphene micro-wells: Energy-efficient, plasma-enabled growth and instant water-based transfer for flexible device applications

The “third-generation” 3D graphene structures, T-junction graphene micro-wells (T-GMWs) are produced on cheap polycrystalline Cu foils in a single-step, low-temperature (270 °C), energy-efficient, and environment-friendly dry plasma-enabled process. T-GMWs comprise vertical graphene (VG) petal-like sheets that seemlessly integrate with each other and the underlying horizontal graphene sheets by forming T-junctions. The microwells have the pico-to-femto-liter storage capacity and precipitate compartmentalized PBS crystals. The T-GMW films are transferred from the Cu substrates, without damage to the both, in de-ionized or tap water, at room temperature, and without commonly used sacrificial materials or hazardous chemicals. The Cu substrates are then re-used to produce similar-quality T-GMWs after a simple plasma conditioning. The isolated T-GMW films are transferred to diverse substrates and devices and show remarkable recovery of their electrical, optical, and hazardous NO2 gas sensing properties upon repeated bending (down to 1 mm radius) and release of flexible trasparent display plastic substrates. The plasma-enabled mechanism of T-GMW isolation in water is proposed and supported by the Cu plasma surface modification analysis. Our GMWs are suitable for various optoelectronic, sesning, energy, and biomedical applications while the growth approach is potentially scalable for future pilot-scale industrial production.

Numerical analysis for the interlayer toughening of piezoelectric smart composite plate

The piezoelectric composite material could engender stress concentration resulting from small cracks during layers easily, as the cracks growth will lead to the failure of the whole structure. In this paper, a finite element model for piezoelectric composite materials by ABAQUS including interlayer crack was established, and the J integral and crack tip stress of different types PZT patches were calculated by using the equivalent integral method. Then, the J integral for adhesive layers with different thickness, elastic modulus considering and not considering piezoelectricity was investigated. The results show that the J integral of mode I, II reduces with thicker adhesive layer and lower elastic modules, and the J integral of mode II decreases more sharply than that of mode I.

Pedestrian self-reported exposure to distraction by smart phones while walking and crossing the road

Pedestrian crashes account for approximately 14% of road fatalities in Australia. Crossing the road, while a minor part of total walking, presents the highest crash risk because of potential interaction with motor vehicles. Crash risk is elevated by pedestrian illegal use of the road, which may be widespread (e.g. 20% of crossings at signalised intersections at a sample of sites, Brisbane) and enforcement is rare. Effective road crossing requires integration of multiple skills and judgements, any of which can be hindered by distraction. Observational studies suggest that pedestrians are increasingly likely to ‘multitask’, using mobile technology for entertainment and communication, elevating the risk of distraction while crossing. To investigate this, intercept interviews were conducted with a convenience sample of 211 pedestrians aged 18-65 years in Brisbane CBD. Self-reported frequency of using a smart phone for activities at two levels of distraction: cognitive only (voice calls); or cognitive and visual (text messages, internet access) while walking or crossing the road was collected. Results indicated that smart phone use for potentially distracting activities while walking and while crossing the road was high, especially among 18-30 year olds, who were significantly more likely than 31-44yo or 45-65yo to report smart phone use while crossing the road. For 18-30yo and the higher risk activity of crossing the road, 32% texted at high frequency levels and 27% used internet at high frequency levels. Risky levels of distracted crossing appear to be a growing safety issue for 18-30yo, with greater attention to appropriate interventions needed.

Tropical prawn trawl bycatch of fish and seasnakes reduced by Yarrow Fisheye Bycatch Reduction Device

Reducing unwanted trawl bycatch is actively encouraged in Australia, particularly in prawn trawl fisheries. We tested the performance of a Bycatch Reduction Device, the Yarrow Fisheye, during two periods of commercial fishing operations in Australia's Northern Prawn Fishery, by comparing the catches of paired treatment and control nets. We compared the catch weights of the small fish and invertebrate bycatch, and the commercially important tiger prawns, from 42 trawls in 2002. The Yarrow Fisheye reduced the weight of small bycatch by a mean of 22.7%, with no loss of tiger prawn. We also compared the numbers of seasnakes caught in 41 and 72 trawls during the spring trawling seasons of 2004 and 2005, respectively. The Yarrow Fisheye reduced the catches by a mean of 43.3%. Flume-tank tests of the Yarrow Fisheye showed that this device created a slow water-flow region extending over 2 m downstream from its position in the net, and close to where the catch accumulates. Finfish and seasnakes may be exploiting this slow water-flow region to escape via the eye, Although the reductions in fish and seasnake bycatch were excellent, we think they could be further improved by relating differences in fisheye position and localised water displacements, to design and rigging changes.

Repeatable Condition-Invariant Visual Odometry for Sequence-Based Place Recognition

This paper describes a vision-only system for place recognition in environments that are tra- versed at different times of day, when chang- ing conditions drastically affect visual appear- ance, and at different speeds, where places aren’t visited at a consistent linear rate. The ma- jor contribution is the removal of wheel-based odometry from the previously presented algo- rithm (SMART), allowing the technique to op- erate on any camera-based device; in our case a mobile phone. While we show that the di- rect application of visual odometry to our night- time datasets does not achieve a level of perfor- mance typically needed, the VO requirements of SMART are orthogonal to typical usage: firstly only the magnitude of the velocity is required, and secondly the calculated velocity signal only needs to be repeatable in any one part of the environment over day and night cycles, but not necessarily globally consistent. Our results show that the smoothing effect of motion constraints is highly beneficial for achieving a locally consis- tent, lighting-independent velocity estimate. We also show that the advantage of our patch-based technique used previously for frame recogni- tion, surprisingly, does not transfer to VO, where SIFT demonstrates equally good performance. Nevertheless, we present the SMART system us- ing only vision, which performs sequence-base place recognition in extreme low-light condi- tions where standard 6-DOF VO fails and that improves place recognition performance over odometry-less benchmarks, approaching that of wheel odometry.

Bond Characteristics of Strengthened and Retrofitted Steel by Smart CFRP Technique

Usage of new smart materials in retrofitting of structures has become popular within last decade. Carbon fiber reinforced polymer (CFRP) has been widely used in retrofitting and strengthening of concrete structures and its usage in metallic structures is still in the developing stage. The variation of mechanical properties of CFRP and the consequent effects on strengthening and retrofitting CFRP systems are yet to be investigated under different loading and environmental conditions. This paper presents the results of CFRP strengthened and retrofitted corroded steel plate double strap joints under tension. An accelerated corrosion cell has been developed to accelerate the corrosion of the steel samples and CFRP strengthened samples. The results show a direct comparison of bond characteristics of CFRP strengthened and retrofitted steel double strap joints.

One device, two doses

Ms Breathless is a 59-year-old lady living with chronic obstructive pulmonary disease (COPD) for several years now, and quit smoking over 20 years ago. She sometimes experiences symptoms of breathlessness, and an unrelenting productive cough, particularly when she comes in contact with dusty places, second-hand smoke, or when her allergies and hay fever play up. Apart from these triggers, her symptoms are well maintained with her inhalers glycopyrronium bromide (Seebri) and indacaterol (Onbrez), and she has been using them for about nine months. Ms Breathless is otherwise healthy, and not taking any other medicines.

Effect of organic gate dielectric material properties on interfacial charging and discharging of pentacene MIM device

The effect of material properties of an environmentally friendly, optically transparent dielectric material, polyterpenol, on the carrier transients within the pentacene-based double-layer MTM device was investigated. Polyterpenol films were RF plasma polymerised under varied process conditions, with resultant films differing in surface chemistry and morphology. Independent of type of polyterpenol, time-resolved EFISHG study of IZO/polyterpenol/pentacene/Au structures showed similar transient behaviour with carriers injected into pentacene from Au electrode only, confirming polyterpenol to be a suitable blocking layer for visualisation of single-species carrier transportation during charging and discharging under different bias conditions. Polyterpenol fabricated under higher input power show better promise due to higher chemical and thermal stability, improved uniformity, and absence of defects.

Investigation of interfacial charging and discharging in double-layer pentacene-based metal-insulator-metal device with polyterpenol blocking layer using electric field induced second harmonic generation

Time-resolved electric field induced second harmonic generation technique was used to probe the carrier transients within double-layer pentacene-based MIM devices. Polyterpenol thin films fabricated from non-synthetic environmentally sustainable source were used as a blocking layer to assist in visualisation of single-species carrier transportation during charging and discharging under different bias conditions. Results demonstrated that carrier transients were comprised of charging on electrodes, followed by carrier injection and charging of the interface. Polyterpenol was demonstrated to be a sound blocking material and can therefore be effectively used for probing of double-layer devices using EFISHG.

Mechanism design of ventricular assist device

This research presents an innovative design approach for the development of high efficiency Ventricular assist device that can be used for long-term support a heart failure patient. Computational fluid dynamics (CFD) techniques were applied to the development and intensive analysis to improve the performance and reliability of the pump. From the CFD analysis, a prototype pump was created and evaluated on the mock circulation loop that simulate the human circulatory system environment to evaluate its performance in support varying heart conditions.

IASDR 2015 Interplay Exhibition 2-5 NOV 2015

It has been said that we are living in a golden age of innovation. New products, systems and services aimed to enable a better future, have emerged from novel interconnections between design and design research with science, technology and the arts. These intersections are now, more than ever, catalysts that enrich daily activities for health and safety, education, personal computing, entertainment and sustainability, to name a few. Interactive functions made possible by new materials, technology, and emerging manufacturing solutions demonstrate an ongoing interplay between cross-disciplinary knowledge and research. Such interactive interplay bring up questions concerning: (i) how art and design provide a focus for developing design solutions and research in technology; (ii) how theories emerging from the interactions of cross-disciplinary knowledge inform both the practice and research of design and (iii) how research and design work together in a mutually beneficial way. The IASDR2015 INTERPLAY EXHIBITION provides some examples of these interconnections of design research with science, technology and the arts. This is done through the presentation of objects, artefacts and demonstrations that are contextualised into everyday activities across various areas including health, education, safety, furniture, fashion and wearable design. The exhibits provide a setting to explore the various ways in which design research interacts across discipline knowledge and approaches to stimulate innovation. In education, Designing South African Children’s Health Education as Generative Play (A Bennett, F Cassim, M van der Merwe, K van Zijil, and M Ribbens) presents a set of toolkits that resulted from design research entailing generative play. The toolkits are systems that engender pleasure and responsibility, and are aimed at cultivating South African’s youth awareness of nutrition, hygiene, disease awareness and prevention, and social health. In safety, AVAnav: Avalanche Rescue Helmet (Jason Germany) delivers an interactive system as a tool to contribute to reduce the time to locate buried avalanche victims. Helmet-mounted this system responds to the contextual needs of rescuers and has since led to further design research on the interface design of rescuing devices. In apparel design and manufacturing, Shrinking Violets: Fashion design for disassembly (Alice Payne) proposes a design for disassembly through the use of beautiful reversible mono-material garments that interactively responds to the challenges of garment construction in the fashion industry, capturing the metaphor for the interplay between technology and craft in the fashion manufacturing industry. Harvest: A biotextile future (Dean Brough and Alice Payne), explores the interplay of biotechnology, materiality and textile design in the creation of sustainable, biodegradable vegan textile through the process of a symbiotic culture of bacteria and yeast (SCOBY). SCOBY is a pellicle curd that can be harvested, machine washed, dried and cut into a variety of designs and texture combinations. The exploration of smart materials, wearable design and micro-electronics led to creative and aesthetically coherent stimulus-reactive jewellery; Symbiotic Microcosms: Crafting Digital Interaction (K Vones). This creation aims to bridge the gap between craft practitioner and scientific discovery, proposing a move towards the notion of a post-human body, where wearable design is seen as potential ground for new human-computer interactions, affording the development of visually engaging multifunctional enhancements. In furniture design, Smart Assistive chair for older adults (Chao Zhao) demonstrates how cross-disciplinary knowledge interacting with design strategies provide solution that employed new technological developments in older aged care, and the participation of multiple stakeholders: designers, health care system and community based health systems. In health, Molecular diagnosis system for newborns deafness genetic screening (Chao Zhao) presents an ambitious and complex project that includes a medical device aimed at resolving a number of challenges: technical feasibility for city and rural contexts, compatibility with standard laboratory and hospital systems, access to health system, and support the work of different hospital specialists. The interplay between cross-disciplines is evident in this work, demonstrating how design research moves forward through technology developments. These works exemplify the intersection between domains as a means to innovation. Novel design problems are identified as design intersects with the various areas. Research informs this process, and in different ways. We see the background investigation into the contextualising domain (e.g. on-snow studies, garment recycling, South African health concerns, the post human body) to identify gaps in the area and design criteria; the technologies and materials reviews (e.g. AR, biotextiles) to offer plausible technical means to solve these, as well as design criteria. Theoretical reviews can also inform the design (e.g. play, flow). These work together to equip the design practitioner with a robust set of ‘tools’ for design innovation – tools that are based in research. The process identifies innovative opportunity and criteria for design and this, in turn, provides a means for evaluating the success of the design outcomes. Such an approach has the potential to come full circle between research and design – where the design can function as an exemplar, evidencing how the research-articulated problems can be solved. Core to this, however, is the evaluation of the design outcome itself and identifying knowledge outcomes. In some cases, this is fairly straightforward that is, easily measurable. For example the efficacy of Jason Germany’s helmet can be determined by measuring the reduced response time in the rescuer. Similarly the improved ability to recycle Payne’s panel garments can be clearly determined by comparing it to those recycling processes (and her identified criteria of separating textile elements!); while the sustainability and durability of the Brough & Payne’s biotextile can be assessed by documenting the growth and decay processes, or comparative strength studies. There are however situations where knowledge outcomes and insights are not so easily determined. Many of the works here are open-ended in their nature, as they emphasise the holistic experience of one or more designs, in context: “the end result of the art activity that provides the health benefit or outcome but rather, the value lies in the delivery and experience of the activity” (Bennet et al.) Similarly, reconfiguring layers of laser cut silk in Payne’s Shrinking Violets constitutes a customisable, creative process of clothing oneself since it “could be layered to create multiple visual effects”. Symbiotic Microcosms also has room for facilitating experience, as the work is described to facilitate “serendipitous discovery”. These examples show the diverse emphasis of enquiry as on the experience versus the product. Open-ended experiences are ambiguous, multifaceted and differ from person to person and moment to moment (Eco 1962). Determining the success is not always clear or immediately discernible; it may also not be the most useful question to ask. Rather, research that seeks to understand the nature of the experience afforded by the artefact is most useful in these situations. It can inform the design practitioner by helping them with subsequent re-design as well as potentially being generalizable to other designers and design contexts. Bennett et. al exemplify how this may be approached from a theoretical perspective. This work is concerned with facilitating engaging experiences to educate and, ultimately impact on that community. The research is concerned with the nature of that experience as well, and in order to do so the authors have employed theoretical lenses – here these are of flow, pleasure, play. An alternative or complementary approach to using theory, is using qualitative studies such as interviews with users to ask them about what they experienced? Here the user insights become evidence for generalising across, potentially revealing insight into relevant concerns – such as the range of possible ‘playful’ or experiences that may be afforded, or the situation that preceded a ‘serendipitous discovery’. As shown, IASDR2015 INTERPLAY EXHIBITION provides a platform for exploration, discussion and interrogation around the interplay of design research across diverse domains. We look forward with excitement as IASDR continues to bring research and design together, and as our communities of practitioners continue to push the envelope of what is design and how this can be expanded and better understood with research to foster new work and ultimately, stimulate innovation.

Additively manufactured device for dynamic culture of large arrays of 3D tissue engineered constructs

The ability to test large arrays of cell and biomaterial combinations in 3D environments is still rather limited in the context of tissue engineering and regenerative medicine. This limitation can be generally addressed by employing highly automated and reproducible methodologies. This study reports on the development of a highly versatile and upscalable method based on additive manufacturing for the fabrication of arrays of scaffolds, which are enclosed into individualized perfusion chambers. Devices containing eight scaffolds and their corresponding bioreactor chambers are simultaneously fabricated utilizing a dual extrusion additive manufacturing system. To demonstrate the versatility of the concept, the scaffolds, while enclosed into the device, are subsequently surface-coated with a biomimetic calcium phosphate layer by perfusion with simulated body fluid solution. 96 scaffolds are simultaneously seeded and cultured with human osteoblasts under highly controlled bidirectional perfusion dynamic conditions over 4 weeks. Both coated and noncoated resulting scaffolds show homogeneous cell distribution and high cell viability throughout the 4 weeks culture period and CaP-coated scaffolds result in a significantly increased cell number. The methodology developed in this work exemplifies the applicability of additive manufacturing as a tool for further automation of studies in the field of tissue engineering and regenerative medicine.