A computational study of carbon dioxide adsorption on solid boron

Capturing and sequestering carbon dioxide (CO2) can provide a route to partial mitigation of climate change associated with anthropogenic CO2 emissions. Here we report a comprehensive theoretical study of CO2 adsorption on two phases of boron, α-B12 and γ-B28. The theoretical results demonstrate that the electron deficient boron materials, such as α-B12 and γ-B28, can bond strongly with CO2 due to Lewis acid-base interactions because the electron density is higher on their surfaces. In order to evaluate the capacity of these boron materials for CO2 capture, we also performed calculations with various degrees of CO2 coverage. The computational results indicate CO2 capture on the boron phases is a kinetically and thermodynamically feasible process, and therefore from this perspective these boron materials are predicted to be good candidates for CO2 capture.

Strain engineering of selective chemical adsorption on monolayer MoS2

Nanomaterials are prone to influence by chemical adsorption because of their large surface to volume ratios. This enables sensitive detection of adsorbed chemical species which, in turn, can tune the property of the host material. Recent studies discovered that single and multi-layer molybdenum disulfide (MoS2) films are ultra-sensitive to several important environmental molecules. Here we report new findings from ab inito calculations that reveal substantially enhanced adsorption of NO and NH3 on strained monolayer MoS2 with significant impact on the properties of the adsorbates and the MoS2 layer. The magnetic moment of adsorbed NO can be tuned between 0 and 1 μB; strain also induces an electronic phase transition between half-metal and metal. Adsorption of NH3 weakens the MoS2 layer considerably, which explains the large discrepancy between the experimentally measured strength and breaking strain of MoS2 films and previous theoretical predictions. On the other hand, adsorption of NO2, CO, and CO2 is insensitive to the strain condition in the MoS2 layer. This contrasting behavior allows sensitive strain engineering of selective chemical adsorption on MoS2 with effective tuning of mechanical, electronic, and magnetic properties. These results suggest new design strategies for constructing MoS2-based ultrahigh-sensitivity nanoscale sensors and electromechanical devices.

MUVE-ing pre-service teachers into the future

This paper discusses our experiences of integrating a Multi-User Virtual Environment (MUVE) called Quest Atlantis into a pre-service secondary science education unit. The use of educational MUVEs as teaching tools is accelerating, so it is crucial that pre-service teachers develop some expertise with these and related technologies. We outline the processes we followed in embedding Quest Atlantis into the content and assessment of the unit, the results of this initiative and its implications for integrating MUVEs and other ICTs into teacher education programs. Challenges such as limited time and expertise, demands of a busy teaching program, and the need for continuous specialist support need to be overcome for sustainable integration of MUVEs and related technologies into preservice teacher education. This is particularly important given the potential of preservice teachers as change agents in schools, and the imperatives of the ICT-related National Professional Standards for Teachers and the Australian Curriculum.

The pre-socialization of future journalists

While the role of university journalism education in the professionalization of journalists has been extensively debated, systematic and comparative studies of journalism students are still scarce. This paper reports the findings from a comparative study of journalism students in seven countries: Australia, Brazil, Chile, Mexico, Spain, Switzerland, and the United States. The data show a number of similarities, but also important differences between pre-professional cultures in journalism around the world. The findings are in line with recent conceptualizations of media systems, although some variations and particularities are observed at the country level. While students in all countries reject a loyal approach and favor a citizen-oriented role, they also do so to different extents. Brazilian and Chilean students believe in the citizen-oriented and watchdog roles, whereas their counterparts in Australia, Switzerland, and the United States favor the consumer-oriented approach to a greater extent. Mexican and Spanish students, on the other hand, while supporting the citizen-oriented role, reject the loyal role comparatively less than the rest of the countries.

Understanding the pre-internationalization phase decision heuristic of Australian SMEs

Since the 1970s, the Uppsala stages model has been one of the dominant explanations of firm internationalization. The model's focus on internationalization as a firm's gradual and incremental process of increasing international involvement has attracted much debate, with one criticism being that it is unclear in explaining how the internationalization process first originates within a firm. In this paper, the Uppsala model is extended through the incorporation of a pre-internationalization phase to explore the antecedents of firm internationalization. Adopting the Uppsala model's theoretical underpinnings, this paper develops and operationalizes a pre-internationalization phase decision heuristic in the form of an ‘export readiness index'. Four constructs are proposed that drive and inhibit export commencement decision-making during a firm's preinternationalization phase: export stimuli, attitudinal/psychological commitment, resources and lateral rigidity. Through a survey of Australian exporting and non-exporting small-medium sized enterprises (SMEs), the Export Readiness Index (ERI) is developed through factor analysis and tested using logistic regression. Results of the study and their potential implications are discussed.

National curriculum reform and equipping pre-service teachers to teach about Australia in the Asian Century

Currently a range of national policy settings are reshaping schooling and teacher education in Australia. This paper presents some of the findings from a small qualitative pilot study conducted with a group of final year pre-service teachers studying a secondary social science curriculum method unit in an Australian university. One of the study’s research objectives aimed at identifying how students reflected on their capacity to navigate curriculum change and, more specifically, on teaching about Australia and Asia in the forthcoming implementation of the first national history curriculum. The unit was designed and taught by the researcher on the assumption that beginning social science teachers need to be empowered to deal with the curriculum change they’ll encounter throughout their careers. The pilot study’s methodology was informed by a constructivist approach to grounded theory and its scope was limited to one semester with volunteer students. Of the pre-service teacher reflections on their preparedness to teach, this paper reports on the content, pedagogy and learning they experienced in one segment of the unit with specific reference to the new history curriculum’s ‘Australia in a world history’ approach and the development of Asia literacy. The findings indicate that whilst pre-service teachers valued the opportunity to engage with learning experiences which enhanced their intercultural understanding and extended their pedagogical and content knowledge on campus, the nature of the final practicum in schools was also influential in shaping their preparedness to enter the profession.

Pre-service teachers’ epistemic perspectives about philosophy in the classroom : it is not a bunch of ‘hippie stuff’

Using epistemic perspectives as a theoretical framework, this study investigated Australian pre-service teachers’ perspectives about knowing, knowledge and children’s learning, as they engaged in a semester-long unit on philosophy in the classroom. During the field experience component of the unit, pre-service teachers were required to teach at least one philosophy lesson. Pre-service teachers completed the Personal Epistemological Beliefs Survey at the beginning and end of the unit. They were also interviewed in focus groups at the end of the semester to investigate their views about children’s learning. Paired sample t-tests were used to explore changes in epistemic beliefs over time. Significant differences were found for only some individual items on the survey. However, when interviewed, pre-service teachers indicated that field experiences helped them consider children as competent ‘thinkers’ who were capable of engaging in philosophy in the classroom. They reported predominantly student-centred perspectives of children’s learning, although a process of adjudication (exploring disagreements and evidence for responses) was lacking in these responses.

Tell me what you see : pre-service teachers' recognition of exemplary digital pedagogy

How do you identify "good" teaching practice in the complexity of a real classroom? How do you know that beginning teachers can recognise effective digital pedagogy when they see it? How can teacher educators see through their students’ eyes? The study in this paper has arisen from our interest in what pre-service teachers “see” when observing effective classroom practice and how this might reveal their own technological, pedagogical and content knowledge. We asked 104 pre-service teachers from Early Years, Primary and Secondary cohorts to watch and comment upon selected exemplary videos of teachers using ICT (information and communication technologies) in Science. The pre-service teachers recorded their observations using a simple PMI (plus, minus, interesting) matrix which were then coded using the SOLO Taxonomy to look for evidence of their familiarity with and judgements of digital pedagogies. From this, we determined that the majority of preservice teachers we surveyed were using a descriptive rather than a reflective strategy, that is, not extending beyond what was demonstrated in the teaching exemplar or differentiating between action and purpose. We also determined that this method warrants wider trialling as a means of evaluating students’ understandings of the complexity of the digital classroom.

Reframing Conceptions of Contemporary Literacy Capabilities in Pre-Service Primary Teacher Education

This chapter describes the challenges of integrating new technologies with literacy education in pre-service primary teacher education in Australia. The authors describe the policy context and regulatory mechanisms controlling pre-service education, including a national set of professional standards for graduate teachers, a new national curriculum for school students, the introduction of high stakes national assessment for school students, and the looming threat of decontextualized back-to-the-basics professional entry tests for aspiring teachers. The chapter includes three case studies of the authors’ pedagogical practices that attempt to reframe conceptions of the literacy capabilities of pre-service teachers to reflect the complex and sophisticated requirements of teachers in contemporary schooling. The authors conclude the chapter with a discussion of the implications of these case studies as they illustrate the ways that pre-service teachers can be scaffolded and supported to develop creative capacity and critical awareness of the kinds of literacies required in the digital age despite restrictive regimes.

Electrocoagulation as a pre-treatment stage to reverse osmosis units

Reverse osmosis (RO) is used by coal seam gas (CSG) operators to treat produced water as it is a well-established and proven technology worldwide. Despite the suitability of RO, there are problems associated with RO technology such as membrane fouling which although not preventing use of RO does decrease effectiveness and increase operating costs. Hence, effective pre-treatment of water samples is essential. Electrocoagulation (EC) potentially can provide improved water purification compared to conventional coagulation prior to an RO unit. This paper provides the first reported study of EC for CSG water pre-treatment and compares the performance to a range of aluminium and iron based coagulants. It was found that EC was superior in terms of removal of silica, calcium, magnesium, barium and strontium in the produced water.

Hydrogen evolution by a metal-free electrocatalyst

Electrocatalytic reduction of water to molecular hydrogen via the hydrogen evolution reaction may provide a sustainable energy supply for the future, but its commercial application is hampered by the use of precious platinum catalysts. All alternatives to platinum thus far are based on nonprecious metals, and, to our knowledge, there is no report about a catalyst for electrocatalytic hydrogen evolution beyond metals. Here we couple graphitic-carbon nitride with nitrogen-doped graphene to produce a metal-free hybrid catalyst, which shows an unexpected hydrogen evolution reaction activity with comparable overpotential and Tafel slope to some of well-developed metallic catalysts. Experimental observations in combination with density functional theory calculations reveal that its unusual electrocatalytic properties originate from an intrinsic chemical and electronic coupling that synergistically promotes the proton adsorption and reduction kinetics.

Effect of strong acids on red mud structural and fluoride adsorption properties

The removal of fluoride using red mud has been improved by acidifying red mud with hydrochloric, nitric and sulphuric acid. This investigation shows that the removal of fluoride using red mud is significantly improved if red mud is initially acidified. The acidification of red mud causes sodalite and cancrinite phases to dissociate, confirmed by the release of sodium and aluminium into solution as well as the disappearance of sodalite bands and peaks in infrared and X-ray diffraction data. The dissolution of these mineral phases increases the amount of available iron and aluminium oxide/hydroxide sites that are accessible for the adsorption of fluoride. The removal of fluoride is dependent on the charge of iron and aluminium oxide/hydroxides on the surface of red mud. Acidifying red mud with hydrochloric, nitric and sulphuric acid resulted in surface sites of the form ≡ SOH2+ and ≡ SOH. Optimum removal is obtained when the majority of surface sites are in the form ≡ SOH2+ as the substitution of a fluoride ion doesn’t cause a significant increase in pH. This investigation shows the importance of having a low and consistent pH for the removal of fluoride from aqueous solutions using red mud.

Neutral and charged boron-doped fullerenes for CO2 adsorption

Recently, the capture and storage of CO2 have attracted research interest as a strategy to reduce the global emissions of greenhouse gases. It is crucial to find suitable materials to achieve an efficient CO2 capture. Here we report our study of CO2 adsorption on boron-doped C60 fullerene in the neutral state and in the 1e−-charged state. We use first principle density functional calculations to simulate the CO2 adsorption. The results show that CO2 can form weak interactions with the BC59 cage in its neutral state and the interactions can be enhanced significantly by introducing an extra electron to the system.

Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

The planning of IMRT treatments requires a compromise between dose conformity (complexity) and deliverability. This study investigates established and novel treatment complexity metrics for 122 IMRT beams from prostate treatment plans. The Treatment and Dose Assessor software was used to extract the necessary data from exported treatment plan files and calculate the metrics. For most of the metrics, there was strong overlap between the calculated values for plans that passed and failed their quality assurance (QA) tests. However, statistically significant variation between plans that passed and failed QA measurements was found for the established modulation index and for a novel metric describing the proportion of small apertures in each beam. The ‘small aperture score’ provided threshold values which successfully distinguished deliverable treatment plans from plans that did not pass QA, with a low false negative rate.

An investigation of the pre-irradiation temporal stability of PAGAT gel dosimeter

In this work we examine two aspects of the PAGAT gel dosimeter. The first aspect studied is determination of a stable range of concentrations of the anti-oxidant Tetrakis Hydroxy Phosphonium Chloride (THPC). Once the desired THPC concentration is determined, we proceed to an investigation into the effect of pre-irradiation storage time and how this affects the dose response of the gel.