Molecular dynamics simulation of fracture strength and morphology of defective graphene

Different types of defects can be introduced into graphene during material synthesis, and significantly influence the properties of graphene. In this work, we investigated the effects of structural defects, edge functionalisation and reconstruction on the fracture strength and morphology of graphene by molecular dynamics simulations. The minimum energy path analysis was conducted to investigate the formation of Stone-Wales defects. We also employed out-of-plane perturbation and energy minimization principle to study the possi-ble morphology of graphene nanoribbons with edge-termination. Our numerical results show that the fracture strength of graphene is dependent on defects and environmental temperature. However, pre-existing defects may be healed, resulting in strength recovery. Edge functionalization can induce compressive stress and ripples in the edge areas of gra-phene nanoribbons. On the other hand, edge reconstruction contributed to the tensile stress and curved shape in the graphene nanoribbons.

The population dynamics of the Galapagos Flightless Cormorant Phalacrocorax harrisi in relation to sea temperature

The Flightless Cormorant Phalacrocorax harrisi is restricted to c. 400 km of the western coastline of the Galápagos archipelago coinciding with the local occurrence of seasonal upwelling of oceanic currents. Individuals frequently make more than one breeding attempt per year, usually change mates, and when juveniles are raised, females desert them to the further care of their mates who complete the rearing alone. Here we report data from a ten-year historical study of a colony stretching c.2 km along the coast-line and representing c. 12% of the total population of the species. The number of clutches laid and juveniles fledged were linked to the occurrence of cold water in off-shore foraging grounds. Most Flightless Cormorants have attachments to local stretches of coastline several hundred metres long. However, a few birds travelled many kilometres, including between colonies, sometimes over open sea. We show that males invest more in nest-building and feeding of the offspring than their mates, and we relate this to the (presumed) in-bred nature of the colony and to male and female reproductive strategies. Our data validate a published demographic model of the species (Valle 1995).

The gender wage gap: what has happened between 1973 and 1990 in Australia?

The current study examines the change in the gender wage gap in Australia over the period 1973 to 1990. The Juhn, Murphy and Pierce (1991) decomposition is used in order to evaluate the role and relative contribution of changes in observed and unobserved skills and their prices. The sensitivity of conclusions to the measure of labour market experience and industry and occupation structure are also examined. The analysis concludes that gender-specific effects are dominant in male-female wage convergence although wage-structure effects also play a minor role.

Insights into the nature of the coupling interactions between uracil corrosion inhibitors and copper : a DFT and molecular dynamics study

In this study, the nature of the coupling interactions between copper and uracil as well as its several derivatives has been systematically investigated employing the atoms in molecules (AIM) theory and energy decomposition analyses. The whole interaction process has been investigated through the analyses of the radial distribution functions of the Cu⋯X (X = S and O) contact on the basis of the ab initio molecular dynamics. No direct relationship between the adsorption strengths and inhibition efficiencies of the inhibitors has been observed. Additionally, the possibility of the methyl-substituted dithiouracil species to act as copper corrosion inhibitors has been tested.

The great divide : bridging the gap

Learning Objective: To describe a collaborative system of clinical allocations using a dedicated, discipline specific administrative coordinator. Methods: The Clinical Placement Coordinator is the liaison person between the student, the academic staff and the clinical sites, and fills an important role in bridging the gap to enhance the student learning experience. With this in mind the Coordinator is very discipline focused and works closely with the academic staff who coordinate the clinical units within the program. This person is the ‘‘face’’ of QUT to the external stakeholders, and ensures that all parties experience a smooth process. This no mean feat given that there are over 350 students to be placed annually, across 14 separate clinical blocks ranging from 1 to 6 weeks in length at various sites. The processes involved in clinical placement allocation will be presented, and the roles of the staff in facilitating students’ placement preferences and matching with clinical site offers will be described. In many allied health programs in Australia, the clinical placement activity is carried out by an academic member of staff. However, this can result in delays in communications due to other workload requirements such as lecture, tutorial and practical class commitments. Having a dedicated knowledgeable administration officer has resulted in a person being available to take calls from clinical staff, meet with students to discuss allocation needs and ensure that academic staff are consulted if and when necessary. The Clinical Placement Coordinator is very much a part of the course team and attends professional meetings and conferences as an avenue of networking and meeting clinical staff. Results: The success in having a dedicated administrative officer as the Clinical Placement Coordinator acting as the conduit between academic staff and students, and the university and clinical staff has been highly successful to date. This was noted in commendations from the 2010 Course Accreditation Panel Report which stated: ‘‘The very positive perception in the professional community of Ms Margaret McBurney’s effective and efficient organization of student clinical placements. Students and clinical professionals commented favourably on the approachability of staff. There is confidence that program staff will follow up on issues raised urgently in clinical centres.’’

Population Dynamics of RNA viruses

Between 50 and 100 million people are infected with dengue viruses each year and more than 100,000 of these die. Dr Choudhury has demonstrated that populations of dengue viruses in individual patients are genetically and functionally very diverse and that this diversity changes significantly at the time of major outbreaks of disease. The results of his studies may inform strategies which will make dengue vaccines far more effective.

The nature of intra-familial conflict in large-scale privately-held family businesses in Indonesia

This thesis is a qualitative study aimed at better capturing the complexity of conflict in family businesses. An inductive content analysis revealed two important issues: the dynamics of intergenerational conflicts and the escalation process of conflicts. The results demonstrated that conflicts are more likely to be intergenerational than intra-generational due to the role of senior members in daily business operations, generational differences, and a perception gap that exist between generations concerning each other’s competencies in doing the business. Furthermore, the set of factors contributing to conflict escalation is related to how family members handle the conflict, how they manage their emotions, and how they are able to avoid non-family employee involvement. These findings provide a foundation for taking preventative actions, implementing strategies for managing conflicts or devising effective solutions for resolving conflicts before they become more destructive.

Growth of C36-films on diamond surface through molecular dynamics simulation

In this paper, the initial stage of films assembled by energetic C36 fullerenes on diamond (001)–(2 × 1) surface at low-temperature was investigated by molecular dynamics simulation using the Brenner potential. The incident energy was first uniformly distributed within an energy interval 20–50 eV, which was known to be the optimum energy range for chemisorption of single C36 on diamond (001) surface. More than one hundred C36 cages were impacted one after the other onto the diamond surface by randomly selecting their orientation as well as the impact position relative to the surface. The growth of films was found to be in three-dimensional island mode, where the deposited C36 acted as building blocks. The study of film morphology shows that it retains the structure of a free C36 cage, which is consistent with Low Energy Cluster Beam Deposition (LECBD) experiments. The adlayer is composed of many C36-monomers as well as the covalently bonded C36 dimers and trimers which is quite different from that of C20 fullerene-assembled film, where a big polymerlike chain was observed due to the stronger interaction between C20 cages. In addition, the chemisorption probability of C36 fullerenes is decreased with increasing coverage because the interaction between these clusters is weaker than that between the cluster and the surface. When the incident energy is increased to 40–65 eV, the chemisorption probability is found to increased and more dimers and trimers as well as polymerlike-C36 were observed on the deposited films. Furthermore, C36 film also showed high thermal stability even when the temperature was raised to 1500 K.

Molecular dynamics simulation of structural characteristics in metal cluster deposition on surfaces

The deposition of small metal clusters (Cu, Au and Al) on f.c.c. metals (Cu, Au and Ni) has been studied by molecular dynamics simulation using Finnis–Sinclair (FS) potential. The impact energy varied from 0.01 to 10 eV/atom. First, the deposition of single cluster was simulated. We observed that, even at much lower energy, a small cluster with (Ih) icosahedral symmetry was reconstructed to match the substrate structure (f.c.c.) after deposition. Next, clusters were modeled to drop, one after the other, on the surface. The nanostructure was found by soft landing of Au clusters on Cu with increasing coverage, where interfacial energy dominates. While at relatively higher deposition energy (a few eV), the ordered f.c.c.-like structure was observed in the first adlayer of the film formed by Al clusters depositing on Ni substrate. This characteristic is mainly attributive to the ballistic collision. Our results indicate that the surface morphology synthesized by cluster deposition could be controlled by experimental parameters, which will be helpful for controlled design of nanostructure.

Molecular dynamics study of ‘contact epitaxy’ in Ag clusters supported on a copper (001) surface

In this paper, the formation of heteroepitaxial interfacial layers was investigated by molecular dynamics simulation of soft silver particles landing on the (001) surface of single-crystal copper. In our simulations, the clusters Ag13, Ag55, Ag147 and Ag688 were chosen as projectiles. A small cluster will rearrange into an f.c.c. structure when it is supported on the substrate, due to the large value of its surface/volume ratio. Contact epitaxy appeared in large clusters. The characteristic structure of an epitaxial layer in large silver cluster shows the 〈111〉 direction to be the preferential orientation of heteroepitaxial layers on the surface because of the lattice mismatch between the cluster and the substrate. This was confirmed by studying soft landing events in other systems (Au/Cu and Al/Ni).

Monster factory : International dynamics of the Australian horror movie industry

From the early-to-mid 2000s, the Australian horror film production sector has achieved growth and prosperity of a kind not seen since its heyday of the 1980s. Australian horror films can be traced back to the early 1970s, when they experienced a measure of commercial success. However, throughout the twenty-first-century Australian horror gained levels of international recognition that have surpassed the cult status enjoyed by some of the films in the 1970s and 1980s. In recent years, Australia has emerged as a significant producer of breakout, cult, and solid B-grade horror films, which have circulated in markets worldwide. Australian horror’s recent successes have been driven by one of its distinguishing features: its international dimensions. As this chapter argues, the Australian horror film production sector is an export-oriented industry that relies heavily on international partnerships and presales (the sale of distribution rights prior to a film’s completion), and on its relationships with overseas distributors. Yet, these traits vary from film to film as the sector is comprised of several distinct domains of production activity, from guerrilla films destined for niche video markets like specialist cult video stores and online mail-order websites to high(er)-end pictures made for theatrical markets. Furthermore, the content and style of Australian horror movies has often been tailored for export. While some horror filmmakers have sought to play up the Australianness of their product, others have attempted to pass off their films as faux-American or as placeless films effaced of national reference points.

Turbulent mixing and sediment processes in peri-urban estuariesin South-East Queensland (Australia)

An estuary is formed at the mouth of a river where the tides meet a freshwater flow and it may be classified as a function of the salinity distribution and density stratification. An overview of the broad characteristics of the estuaries of South-East Queensland(Australia) is presented herein, where the small peri-urban estuaries may provide an useful indicator of potential changes which might occur in larger systems with growing urbanisation. Small peri-urban estuaries exhibits many key hydrological features and associated with ecosystem types of larger estuaries, albeit at smaller scales, often with a greater extent of urban development as a proportion of catchment area. We explore the potential for some smaller peri-urban estuaries to be used as natural laboratories to gain some much needed information on the estuarine processes, although any dynamics similarity is presently limited by critical absence of in-depth physical investigation in larger estuarine systems. The absence of the detailed turbulence and sedimentary data hampers the understanding and modelling of the estuarine zones. The interactions between the various stake holders are likely to define the vision for the future of South-East Queensland's peri-urban estuaries. This will require a solid understanding of the bio-physical function and capacity of the peri-urban estuaries. Based upon the knowledge gap, it is recommended that an adaptive trial and error approach be adopted for the future of investigation and management strategies.

Molecular dynamics simulation of fracture strength and morphology of defective graphene

Different types of defects can be introduced into graphene during material synthesis, and significantly influence the properties of graphene. In this work, we investigated the effects of structural defects, edge functionalisation and reconstruction on the fracture strength and morphology of graphene by molecular dynamics simulations. The minimum energy path analysis was conducted to investigate the formation of Stone-Wales defects. We also employed out-of-plane perturbation and energy minimization principle to study the possible morphology of graphene nanoribbons with edge-termination. Our numerical results show that the fracture strength of graphene is dependent on defects and environmental temperature. However, pre-existing defects may be healed, resulting in strength recovery. Edge functionalization can induce compressive stress and ripples in the edge areas of graphene nanoribbons. On the other hand, edge reconstruction contributed to the tensile stress and curved shape in the graphene nanoribbons.

Bridging the gap: Wellness differences between high and low SES Australian adolescents

Aims Wellness assessments can determine adolescent lifestyle behaviors. A better understanding of wellness differences between high and low SES adolescents could assist policy makers to develop improved strategies to bridge the gap between these two groups. The aim of this investigation was to explore wellness differences between high and low SES adolescents. Methods In total, 241 (125 high and 116 low SES) adolescents completed the 5-Factor Wellness Inventory (5F-Wel). The 5F-Wel comprises 97 items contributing to 17 subscales, 5 dimensions, 4 contexts, total wellness, and a life satisfaction index, with scores ranging from 0-100. Independent sample t-tests were performed with Levene’s test of equality for variances, which checked the assumption of homogeneity of variances. Results Overall, 117 (94%) and 112 (97 %) high and low SES participants had complete data and were included in the analysis. The high SES group scored higher for total wellness (M = 81.09, SE = .61) than the low SES group (M = 75.73, SE = .99). This difference was significant t (186) = 4.635, p < .05, with a medium effect size r = .32. The high SES group scored higher on 23 of 27 scales (21 scales, p < .05), while the low SES group scored higher on the remaining 3 scales (all non-significant). Conclusion These results contribute empirical data to the body of literature, indicating a large wellness discrepancy between high and low SES youth. Deficient areas can be targeted by policymakers to assist in bridging the gap between these groups.

Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings

In this paper two-dimensional (2-D) numerical investigation of flow past four square cylinders in an in-line square configuration are performed using the lattice Boltzmann method. The gap spacing g=s/d is set at 1, 3 and 6 and Reynolds number ranging from Re=60 to 175. We observed four distinct wake patterns: (i) a steady wake pattern (Re=60 and g=1) (ii) a stable shielding wake pattern (80≤Re≤175 and g=1) (iii) a wiggling shielding wake pattern (60≤Re≤175 and g=3) (iv) a vortex shedding wake pattern (60≤Re≤175 and g=6) At g=1, the Reynolds number is observed to have a strong effect on the wake patterns. It is also found that at g=1, the secondary cylinder interaction frequency significantly contributes for drag and lift coefficients signal. It is found that the primary vortex shedding frequency dominates the flow and the role of secondary cylinder interaction frequency almost vanish at g=6. It is observed that the jet between the gaps strongly influenced the wake interaction for different gap spacing and Reynolds number combination. To fully understand the wake transformations the details vorticity contour visualization, power spectra of lift coefficient signal and time signal analysis of drag and lift coefficients also presented in this paper.