Knowledge channelization and innovation

This paper examines knowledge management and innovation in the Australian Construction Industry. A conceptual model is presented, based upon analysis of the literature and a series of preliminary construction industry interviews. Extensive knowledge management (KM) research has focused upon types of knowledge contained within specific organizational settings. However, we argue that a crucial missing link in KM research concerns the interface between flows of knowledge from external sources of innovations and its channelization in and out, and between organizations. This interface, regulating and facilitating knowledge from external sources of innovation into the organisation, operates under the influence of two main forces visualized as “pulling” and “pushing” forces in the model presented in this paper. The premise of the model lies in a hypothesis that as an organization changes itself into a more mature, learning organization (LO) over time, knowledge flows into it through “pull” rather than “push” forces. We conclude that a successful knowledge management initiative installs a learning and knowledge sharing culture, which is easily adaptable to new learning offering little resistance to new knowledge that flows into the organisation. The model bridges the gap between research and its application in construction practice.

Discrepancy between human resource research and practice : comparison of industrial/organisational psychologists and human resource practitioners' beliefs

There is a large and growing body of research to show that human resource (HR) practices affect individual performance, organisational productivity and organisational performance. Academic findings about effective HR practices, however, have not readily been adopted by practitioners. A variety of theoretical and practical explanations have been advanced about the research-practice gap. Research by Rynes, Colbert, and Brown (2002) suggested that the research-practice gap is due to a lack of knowledge, but the extent to which these findings apply to the Australian context is unknown. The sample consisted of 102 industrial/organisational (I/O) psychologists and 89 HR practitioners. The main aim of the present study was to replicate and extend the work of Rynes et al. by examining and comparing the knowledge of I/O psychologists and HR practitioners. It was found that overall I/O psychologists were better informed about HR research than HR practitioners; in particular, they were more knowledgeable about management practices and recruitment and selection. In both groups, of the five content areas examined (Management Practices; General Employment Practices; Training and Development; Recruitment and Selection; and Compensation and Benefits), the greatest gaps were in Recruitment and Selection.

Engaging, enraging public relations and the role of the other

The intention of this paper is to further the discussion around the development of theories of public relations by introducing to the mix the concept of the Other from the field of cultural studies. The development of discipline-specific theories as part of a “scholarly body of knowledge” (Wylie, 1994, p.2) – or at least a “unique” knowledge base (Parkinson, 2001) – has been suggested as one of the defining characteristics of a true profession. In the case of public relations, this is a development that has occurred relatively recently. Since public relations first began to emerge as a distinct practice in the early part of the 20th century, there has been a tendency to appropriate theories from other areas (such as organisational and media studies) to create a relevant theory base to explore, describe and predict public relations activities. However, these theories were often rarely more than a ‘best fit’ solution, and resulting areas of discrepancy led to much confusion surrounding the form and function of public relations. It could be argued therefore that the development of dedicated public relations theory – ideas that encompass the creation, maintenance and enhancement of relationships between organisations and publics as primary motivations – only began in the latter half of the 20th century with the work of people such as Grunig and Hunt, and latterly Ledingham and Bruning among others.

Sharing knowledge at work : macro, social and relational individual influences on individual behavior

The impact of relations between an organization and its workers and the relations among workers on individual knowledge generation and sharing practices has not, to date, been addressed in an integrated way. This paper discusses the findings of a study analyzing issues at macro, locally-constructed and micro levels in a public sector organization, to identify and integrate the complex sets of mediators. Key factors were found to include (a) the contested nature of the process of knowledge construction, (b) the worker’s experience of the organization’s internal environment, (c) how the organization is understood to value knowledge sharing, (d) relations with colleagues, and (e) the perceived outcomes of knowledge sharing behaviors. Implications for practice are discussed.

Source location of acoustic emission waves for structural health monitoring of bridges

The process of structural health monitoring (SHM) involves monitoring a structure over a period of time using appropriate sensors, extracting damage sensitive features from the measurements made by the sensors and analysing these features to determine the current state of the structure. Various techniques are available for structural health monitoring of structures and acoustic emission (AE) is one technique that is finding an increasing use. Acoustic emission waves are the stress waves generated by the mechanical deformation of materials. AE waves produced inside a structure can be recorded by means of sensors attached on the surface. Analysis of these recorded signals can locate and assess the extent of damage. This paper describes preliminary studies on the application of AE technique for health monitoring of bridge structures. Crack initiation or structural damage will result in wave propagation in solid and this can take place in various forms. Propagation of these waves is likely to be affected by the dimensions, surface properties and shape of the specimen. This, in turn, will affect source localization. Various laboratory test results will be presented on source localization, using pencil lead break tests. The results from the tests can be expected to aid in enhancement of knowledge of acoustic emission process and development of effective bridge structure diagnostics system.

Building information modelling : an issue of adoption and change management

Building Information Modelling (BIM) is an IT enabled technology that allows storage, management, sharing, access, update and use of all the data relevant to a project through out the project life-cycle in the form of a data repository. BIM enables improved inter-disciplinary collaboration across distributed teams, intelligent documentation and information retrieval, greater consistency in building data, better conflict detection and enhanced facilities management. While the technology itself may not be new, and similar approaches have been in use in some other sectors like Aircraft and Automobile industry for well over a decade now, the AEC/FM (Architecture, Engineering and Construction/ Facilities Management) industry is still to catch up with them in its ability to exploit the benefits of the IT revolution. Though the potential benefits of the technology in terms of knowledge sharing, project management, project co-ordination and collaboration are near to obvious, the adoption rate has been rather lethargic, inspite of some well directed efforts and availability of supporting commercial tools. Since the technology itself has been well tested over the years in some other domains the plausible causes must be rooted well beyond the explanation of the ‘Bell Curve of innovation adoption’. This paper discusses the preliminary findings of an ongoing research project funded by the Cooperative Research Centre for Construction Innovation (CRC-CI) which aims to identify these gaps and come up with specifications and guidelines to enable greater adoption of the BIM approach in practice. A detailed literature review is conducted that looks at some of the similar research reported in the recent years. A desktop audit of some of the existing commercial tools that support BIM application has been conducted to identify the technological issues and concerns, and a workshop was organized with industry partners and various players in the AEC industry for needs analysis, expectations and feedback on the possible deterrents and inhibitions surrounding the BIM adoption.

Barriers to effective knowledge transfer in project-based organisations

Effective knowledge transfer can prevent the reinvention of systems and ideas as well as the repetition of errors. Doing so will save substantial time, as well as contribute to better performance of projects and project-based organisations (PBOs). Despite the importance of knowledge, PBOs face serious barriers to the effective transfer of knowledge, while their characteristics, such as unique and innovative approaches taken during every project, mean they have much to gain from knowledge transfer. As each new project starts, there is the strong potential to reinvent the process, rather than utilise learning from previous projects. In fact, rework is one of the primary factors contributing to construction industry's poor performance and productivity. Current literature has identified several barriers to knowledge transfer in organisational settings in general, and not specifically PBOs. However, PBOs significantly differ from other types of organisations. PBOs operate mainly on temporary projects, where time is a crucial factor and people are more mobile than in other organisational settings. The aim of this research is to identify the key barriers that prevent effective knowledge transfer for PBOs, exclusively. Interviews with project managers and senior managers of PBOs complement the analysis of the literature and provide professional expertise. This research is crucial to gaining a better understanding of obstacles that hinder knowledge transfer in projects. The main contribution of this research is exclusive for PBO, list of key barriers that organisation and project managers need to consider to ensure effective knowledge transfer and better project management.

Public awareness of ‘green’ residential property – an empirical survey based on data from New Zealand and Germany

Over the last few years more stringent environmental laws (e.g. the German “Energie¬ein-sparverordnung ENEV” - Energy Performance of Buildings Directive) and soaring energy prices has increased the need for the real estate industry to react and participate in overall energy reduction through efficient house construction and design, as well as upgrading the existing housing stock to be more energy efficient. Therefore the Property Economics Group at Queensland University of Technology in Australia and Nuertingen-Geislingen University in Germany are carrying out research in relation to sustainable housing construction and public awareness of “green” residential property. Part of this research is to gain an understanding of the level of knowledge and importance of these issues to the house buyer and to determine the importance of sustainable housing to the general public. The paper compares data from two different empirical studies; one of studies analyzes the situation in New Zealand, the other is focused on Germany.

How does knowledge constrain sport performance? An ecological perspective

From an ecological perspective knowledge signifies the degree of fitness of a performer and his/her environment. From this viewpoint, the role of training is to enhance this degree of fit between a specific athlete and the performance environment, instead of the enrichment of memory in the performer. In this regard, ecological psychology distinguishes between perceptual knowledge or "knowledge of" the environment and symbolic knowledge or "knowledge about" the environment. This distinction elucidates how knowing how to act (knowing of) as well as knowing how to verbalise memorial representations (e.g., a verbal description of performance) (knowing about) are both rooted in perception. In this chapter we demonstrate these types of knowledge in decision-making behaviour and exemplify how they can be presented in 1 v 1 practice task contraints in basketball.

The role of fluency in a mathematics item with an embedded graphic: Interpreting a pie chart.

The purpose of this study was to identify the pedagogical knowledge relevant to the successful completion of a pie chart item. This purpose was achieved through the identification of the essential fluencies that 12–13-year-olds required for the successful solution of a pie chart item. Fluency relates to ease of solution and is particularly important in mathematics because it impacts on performance. Although the majority of students were successful on this multiple choice item, there was considerable divergence in the strategies they employed. Approximately two-thirds of the students employed efficient multiplicative strategies, which recognised and capitalised on the pie chart as a proportional representation. In contrast, the remaining one-third of students used a less efficient additive strategy that failed to capitalise on the representation of the pie chart. The results of our investigation of students’ performance on the pie chart item during individual interviews revealed that five distinct fluencies were involved in the solution process: conceptual (understanding the question), linguistic (keywords), retrieval (strategy selection), perceptual (orientation of a segment of the pie chart) and graphical (recognising the pie chart as a proportional representation). In addition, some students exhibited mild disfluencies corresponding to the five fluencies identified above. Three major outcomes emerged from the study. First, a model of knowledge of content and students for pie charts was developed. This model can be used to inform instruction about the pie chart and guide strategic support for students. Second, perceptual and graphical fluency were identified as two aspects of the curriculum, which should receive a greater emphasis in the primary years, due to their importance in interpreting pie charts. Finally, a working definition of fluency in mathematics was derived from students’ responses to the pie chart item.

A re-examination of the Ghrelin and Ghrelin receptor genes

The last few years have seen dramatic advances in genomics, including the discovery of a large number of non-coding and antisense transcripts. This has revolutionised our understanding of multifaceted transcript structures found within gene loci and their roles in the regulation of development, neurogenesis and other complex processes. The recent and continuing surge of knowledge has prompted researchers to reassess and further dissect gene loci. The ghrelin gene (GHRL) gives rise to preproghrelin, which in turn produces ghrelin, a 28 amino acid peptide hormone that acts via the ghrelin receptor (growth hormone secretagogue receptor/GHSR 1a). Ghrelin has many important physiological and pathophysiological roles, including the stimulation of growth hormone (GH) release, appetite regulation, and cancer development. A truncated receptor splice variant, GHSR 1b, does not bind ghrelin, but dimerises with GHSR 1a, and may act as a dominant negative receptor. The gene products of ghrelin and its receptor are frequently overexpressed in human cancer While it is well known that the ghrelin axis (ghrelin and its receptor) plays a range of important functional roles, little is known about the molecular structure and regulation of the ghrelin gene (GHRL) and ghrelin receptor gene (GHSR). This thesis reports the re-annotation of the ghrelin gene, discovery of alternative 5’ exons and transcription start sites, as well as the description of a number of novel splice variants, including isoforms with a putative signal peptide. We also describe the discovery and characterisation of a ghrelin antisense gene (GHRLOS), and the discovery and expression of a ghrelin receptor (growth hormone secretagogue receptor/GHSR) antisense gene (GHSR-OS). We have identified numerous ghrelin-derived transcripts, including variants with extended 5' untranslated regions and putative secreted obestatin and C-ghrelin transcripts. These transcripts initiate from novel first exons, exon -1, exon 0 and a 5' extended 1, with multiple transcription start sites. We used comparative genomics to identify, and RT-PCR to experimentally verify, that the proximal exon 0 and 5' extended exon 1 are transcribed in the mouse ghrelin gene, which suggests the mouse and human proximal first exon architecture is conserved. We have identified numerous novel antisense transcripts in the ghrelin locus. A candidate non-coding endogenous natural antisense gene (GHRLOS) was cloned and demonstrates very low expression levels in the stomach and high levels in the thymus, testis and brain - all major tissues of non-coding RNA expression. Next, we examined if transcription occurs in the antisense orientation to the ghrelin receptor gene, GHSR. A novel gene (GHSR-OS) on the opposite strand of intron 1 of the GHSR gene was identified and characterised using strand-specific RT-PCR and rapid amplification of cDNA ends (RACE). GHSR-OS is differentially expressed and a candidate non-coding RNA gene. In summary, this study has characterised the ghrelin and ghrelin receptor loci and demonstrated natural antisense transcripts to ghrelin and its receptor. Our preliminary work shows that the ghrelin axis generates a broad and complex transcriptional repertoire. This study provides the basis for detailed functional studies of the the ghrelin and GHSR loci and future studies will be needed to further unravel the function, diagnostic and therapeutic potential of the ghrelin axis.

Behaviour and design of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

Understanding the creative economy : a tale of two cities clusters

This article investigates underlying constraints within China’s creative economy. Drawing on two studies of creative clusters in Suzhou and Foshan, it identifies the importance of knowledge transfer and internationalization to the generation of higher value-added products and services. Both examples illustrate relationships between resources, activities, routines and entrepreneurship. The article argues that the examples notwithstanding, the vast majority of what is accounted for in data collection as China’s creative industries are more appropriately cultural industries. The focus on cultural industries drives local development and increases land values but the benefits are rarely dispersed internationally or into the broader economy.

Modernist 16-19 Business Education in a Postmodern world - critical evidence of business practice and business education in the cultural industries

This article examines the continued relevance of the 16-19 business education curriculum in the UK, stimulated by doubts expressed by Thomas (1996), over its continued relevance. We express a concern that business education needs, but is struggling, to respond to significant societal shifts in consumption and production strategies that do not sit easily within traditional theories of business practice currently underpinning 16-19 business education. We examine firstly, the extent to which a formal body of knowledge couched in a modernist discourse of facts and objectivity can cope with the changing and fluid developments in much current business practice that is rooted in the cultural and symbolic. Secondly, the extent to which both academic and vocational competences provide the means for students to develop a framework of critical understanding that can respond effectively to rapidly changing business environments.Findings are based on research conducted jointly by the University of Manchester and the Manchester Institute for Popular Culture at Manchester Metropolitan University. The growth of dynamism of the cultural industries sector - largely micro-businesses and small and medium sized enterprises (SMEs) -encapsulates forms of business knowledge, business language and business practice which may not immediately fit with the models provided within business education. Results suggest increasingly reflexive forms of consumption being met by similarly reflexive and flexible modes of production.Our evidence suggests that whilst modernist business knowledge is often the foundation for many 16-19 business education courses, these programmes of study/training do not usually reflect the activities of SME and micro-business practitioners in the cultural industries. Given the importance of cultural industries in terms of the production strategies required to meet increasingly reflexive markets, it is suggested that there may be a need to incorporate a postmodern approach to the current content and pedagogy; one that is contextual, cultural and discursive.

Planning for knowledge-based urban development : global perspectives

Purpose: The purpose of this article is to investigate the engineering of creative urban regions through knowledge-based urban development. In recent years city administrators realised the importance of engineering and orchestrating knowledge city formation through visioning and planning for economic, socio-cultural and physical development. For that purpose a new development paradigm of ‘‘knowledge-based urban development’’ is formed, and quickly finds implementation ground in many parts of the globe.----- Design/methodology/approach: The paper reviews the literature and examines global best practice experiences in order to determine how cities are engineering their creative urban regions so as to establish a base for knowledge city formation.----- Findings: The paper sheds light on the different development approaches for creative urban regions, and concludes with recommendations for urban administrations planning for knowledge-based development of creative urban regions.----- Originality/value: The paper provides invaluable insights and discussion on the vital role of planning for knowledge-based urban development of creative urban regions.