An examination of keystroke dynamics for continuous user authentication

Most current computer systems authorise the user at the start of a session and do not detect whether the current user is still the initial authorised user, a substitute user, or an intruder pretending to be a valid user. Therefore, a system that continuously checks the identity of the user throughout the session is necessary without being intrusive to end-user and/or effectively doing this. Such a system is called a continuous authentication system (CAS). Researchers have applied several approaches for CAS and most of these techniques are based on biometrics. These continuous biometric authentication systems (CBAS) are supplied by user traits and characteristics. One of the main types of biometric is keystroke dynamics which has been widely tried and accepted for providing continuous user authentication. Keystroke dynamics is appealing for many reasons. First, it is less obtrusive, since users will be typing on the computer keyboard anyway. Second, it does not require extra hardware. Finally, keystroke dynamics will be available after the authentication step at the start of the computer session. Currently, there is insufficient research in the CBAS with keystroke dynamics field. To date, most of the existing schemes ignore the continuous authentication scenarios which might affect their practicality in different real world applications. Also, the contemporary CBAS with keystroke dynamics approaches use characters sequences as features that are representative of user typing behavior but their selected features criteria do not guarantee features with strong statistical significance which may cause less accurate statistical user-representation. Furthermore, their selected features do not inherently incorporate user typing behavior. Finally, the existing CBAS that are based on keystroke dynamics are typically dependent on pre-defined user-typing models for continuous authentication. This dependency restricts the systems to authenticate only known users whose typing samples are modelled. This research addresses the previous limitations associated with the existing CBAS schemes by developing a generic model to better identify and understand the characteristics and requirements of each type of CBAS and continuous authentication scenario. Also, the research proposes four statistical-based feature selection techniques that have highest statistical significance and encompasses different user typing behaviors which represent user typing patterns effectively. Finally, the research proposes the user-independent threshold approach that is able to authenticate a user accurately without needing any predefined user typing model a-priori. Also, we enhance the technique to detect the impostor or intruder who may take over during the entire computer session.

A case-control study of ambient heat exposure and urolithiasis among outdoor workers in a shipbuilding company, Guangzhou, China

Higher ambient temperatures will increase heat stress on workers, leading to impacts upon their individual health and productivity. In particular, research has indicated that higher ambient temperatures can increase the prevalence of urolithiasis. This thesis examines the relationship between ambient heat exposure and urolithiasis among outdoor workers in a shipbuilding company in Guangzhou, China, and makes recommendations for minimising the possible impacts of high ambient temperatures on urolithiasis. A retrospective 1:4 matched case-control study was performed to investigate the association between ambient heat exposure and urolithiasis. Ambient heat exposure was characterised by total exposure time, type of work, department and length of service. The data were obtained from the affiliated hospital of the shipbuilding company under study for the period 2003 to 2010. A conditional logistic regression model was used to estimate the association between heat exposure and urolithiasis. This study found that the odds ratio (OR) of urolithiasis for total exposure time was 1.5 (95% confidence interval (CI): 1.2–1.8). Eight types of work in the shipbuilding company were investigated, including welder, assembler, production security and quality inspector, planing machine operator, spray painter, gas-cutting worker and indoor employee. Five out of eight types of work had significantly higher risks for urolithiasis, and four of the five mainly consisted of outdoors work with ORs of 4.4 (95% CI: 1.7–11.4) for spray painter, 3.8 (95% CI: 1.9–7.2) for welder, 2.7 (95% CI: 1.4–5.0) for production security and quality inspector, and 2.2 (95% CI: 1.1–4.3) for assembler, compared to the reference group (indoor employee). Workers with abnormal blood pressure (hypertension) were more likely to have urolithiasis with an OR of 1.6 (95% CI: 1.0–2.5) compared to those without hypertension. This study contributes to the understanding of the association between ambient heat exposure and urolithiasis among outdoor workers in China. In the context of global climate change, this is particularly important because rising temperatures are expected to increase the prevalence of urolithiasis among outdoor workers, putting greater pressure on productivity, occupational health management and health care systems. The results of this study have clear implications for public health policy and planning, as they indicate that more attention is required to protect outdoor workers from heat-related urolithiasis.

Can a parent do too much for their child? An examination by parenting professionals of the concept of overparenting

Is there a point where parental effort can be too much? While the link between parenting effort and the wellbeing of children has been firmly established, contemporary discussion has proposed that extreme levels of parental protection of and responsiveness to children could be counterproductive. Research has not yet addressed this phenomenon to ascertain if overparenting is a genuinely different type of parenting approach. The purpose of the present study was to gain insight into the parenting actions considered by parenting professionals (psychologists and school guidance counsellors) to be overparenting. One hundred and twenty-eight professionals responded to an online survey about their observations of overparenting, with eighty-six respondents providing lists of the types of actions they believed were behavioural examples of the term. The survey data revealed that certain types of actions were considered to be indicative of overparenting, and that particular beliefs and outcomes may be involved in this parenting approach. Implications for parenting advice and education programs, and further research are discussed.

Improving health behaviours during pregnancy: A new direction for the pregnancy handheld record

Obstetric documentation processes may influence the clinical, behavioural, and psychological outcomes of pregnancy, although recent alterations to integrate obstetric documentation with pregnancy handheld records have been unsuccessful. Woman-held records as a companion to usual obstetric documentation have the potential to improve pregnancy-related health behaviours with a demonstrated association with maternal and infant health outcomes, and recommendations for their format and content are provided.

Porosity of serially sectioned interplanetary dust particles

The application of epoxy embedding and microtomy to individual chondritic interplanetary dust particles (lOP's)(Bradley and Brownlee, 1986a) provides not only higher precision in thin-film elemental analyses (Bradley and Brownlee, 19861:1), but also allows a wealth of other important techniques for the micro-characterization of these primitive extraterrestrial materials. For example, individual sections (e.g. 100 nm thick) or a series of sections, can be examined using image analysis techniques which utilize either transmitted or scanned secondary electron images, or alternatively, secondary X-ray spectra collected concurrently from a given region of sample. Individual particles, or groups of particles with similar image characteristics can then be rapidly identified using conventional grey-scale/particle recognition techniques for each microtomed section of lOP. This type of image analysis provides a suitable method for determination of particle size and shape distribution as well as porosity throughout the aggregate.

Analysis of Object-Specific Authorization Protocol (OSAP) using coloured Petri nets

The use of Trusted Platform Module (TPM) is be- coming increasingly popular in many security sys- tems. To access objects protected by TPM (such as cryptographic keys), several cryptographic proto- cols, such as the Object Specific Authorization Pro- tocol (OSAP), can be used. Given the sensitivity and the importance of those objects protected by TPM, the security of this protocol is vital. Formal meth- ods allow a precise and complete analysis of crypto- graphic protocols such that their security properties can be asserted with high assurance. Unfortunately, formal verification of these protocols are limited, de- spite the abundance of formal tools that one can use. In this paper, we demonstrate the use of Coloured Petri Nets (CPN) - a type of formal technique, to formally model the OSAP. Using this model, we then verify the authentication property of this protocol us- ing the state space analysis technique. The results of analysis demonstrates that as reported by Chen and Ryan the authentication property of OSAP can be violated.

Australia at the crossroads : a review of school science practical work

In Australia we are at a crossroad in science education. We have come from a long history of adopting international curricula, through to blending international and Australian developed materials, to the present which is a thoroughly unique Australian curriculum in science. This paper documents Australia’s journey over the past 200 years, as we prepare for the unveiling of our first truly Australian National Curriculum. One of the unique aspects of this curriculum is the emphasis on practical work and inquiry-based learning. This paper identifies seven forms of practical work currently used in Australian schools and the purposes aligned with each form by 138 pre-service and experienced in-service teachers. The paper explores the question “What does the impending national curriculum, with its emphasis on practical inquiry mean to the teachers now, are they ready?” The study suggests that practical work in Australian schools is multifaceted, and the teacher aligned purposes are dependent not only upon the age of the student, but also on the type of practical work being undertaken. It was found that most teachers are not ready to teach using inquiry-based pedagogy and cite lack of content knowledge, behaviour management, and lack of physical resources and availability of classroom space as key issues which will hinder their implementation of the inquiry component of Australia’s pending curriculum in science.

Child car restraints : mandating type and seating row according to age with positive effect in regional city in Queensland, Australia

Road trauma is a leading cause of child injury worldwide. In highly motorised countries, injury as a passenger represents a major proportion of all child road deaths and hospitalisations. Australia is no exception, particularly since there are high levels of private motor vehicle travel to school in most Australian states. Recently the legislation governing the type of car restraints required for children aged under 7 years has changed in Australia, aligning requirements better with accepted best practice. However, it is unclear what effect these changes have had on children’s seating positions or the types of restraints used. A mixed methods evaluation of the impact of the new legislation on compliance was conducted at three times: baseline (Time 1); after announcement that changes were going to be implemented but before enforcement began (Time 2); and after enforcement commenced (Time 3). Measures of compliance were obtained using two methods: road-side observations of vehicles with child passengers; and parental self-report (intercept interviews conducted at Time 2 and Time 3 only). Results from the observations suggested an overall positive effect. Proportions of children occupying front seats decreased overall and use of dedicated child seats increased to almost 40% of the observed children by Time 3. However, almost a quarter of the children observed still occupied front seats. These results differed from those of the interview study where almost no children were reported as usually travelling in the front seat, and reported use of dedicated restraints with children was almost 90%, over twice that of the observations.

Ultimate limit states design of concrete railway sleepers

The railway industry has been slow to adopt limit states principles in the structural design of concrete sleepers for its tracks, despite the global take up of this form of design for almost every other type of structural element. Concrete sleeper design is still based on limiting stresses but is widely perceived by track engineers to lead to untapped reserves of strength in the sleepers. Limit design is a more rational philosophy, especially where it is based on the ultimate dynamic capacity of the concrete sleepers. The paper describes the development of equations and factors for a limit design methodology for concrete sleepers in flexure using a probabilistic evaluation of sleeper loading. The new method will also permit a cogent, defensible means of establishing the true capacity of the billions of concrete sleepers that are currently in-track around the world, leading to better utilisation of track infrastructure. The paper demonstrates how significant cost savings may be achieved by track owners.

Pilot study of an individualised early post partum intervention to increase physical activity in women with previous gestational diabetes

Background: Whilst the benefits of physical activity in preventing progression from impaired glucose tolerance to overt diabetes in older adults are well recognised, it is not clear which strategies may prevent progression to overt diabetes in women with recent gestational diabetes. We sought to devise and pilot test a convenient, home based exercise program with telephone support, suited to the early post partum period. Twenty eight women with recent gestational diabetes were enrolled six weeks post partum into a 12 week randomised controlled trial of Usual Care ("UC" Controls (n= 13)) vs. Supported Care ("SC" individualised exercise program with regular telephone support (n= 15)). Findings: Baseline characteristics for the whole cohort at six weeks post partum (Mean ± SD) were Age 33 ± 4 years, Weight 80 ± 20 kg and Body Mass Index (BMI) 30.0 ± 9.7 kg / m2. The primary outcome, planned physical activity, increased by Median (Range) 60 (0-540) mins/wk in the SC group vs. 0 (0-580) mins/wk in the UC group (p = 0.234, Mann Whitney U test). The change in planned physical activity predominantly comprised planned walking. Body weight, BMI, waist circumference, % body fat (measured by bioimpedance), fasting glucose and insulin did not change significantly over time in either group. Conclusions: The intervention designed to increase physical activity in post partum women with previous gestational diabetes was feasible. However, no evidence to suggest that this type of program provides any measurable improvement in metabolic or biometric parameters over a three month post partum follow up was observed.

Designing the future in wound care : the role of the nurse practitioner

The nurse practitioner is emerging as a new level and type of health care. Increasing specialisation and advanced educational opportunities in nursing and the inequality in access to health care for sectors of the community have established the conditions under which the nurse practitioner movement has strengthened both nationally and internationally. The boundaries of responsibility for nurses are changing, not only because of increased demands but also because nurses have demonstrated their competence in varied extended and expanded practice roles. The nurse practitioner role reflects the continuing development of the nursing profession and substantially extends the career path for clinical nurses. This paper describes an aspect of a large-scale investigation into the feasibility of the role of the nurse practitioner in the Australian Capital Territory (ACT) health care system. The paper reports on the trial of practice for a wound care nurse practitioner model in a tertiary institution. In the trial the wound care nurse practitioner worked in an extended practice role for 10 months. The nurse practitioner practice was supported, monitored and mentored by a clinical support team. Data were collected relating to a range of outcomes including definition of the scope of practice for the model, description of patient demographics and outcomes and the efficacy of the nurse practitioner service. The findings informed the development of clinical protocols that define the scope of practice and the parameters of the wound care nurse practitioner model and provided information on the efficacy of this model of health care for the tertiary care environment. The findings further suggest that this model brings expert wound care and case management to an at-risk patient population. Recommendations are made relating to ongoing research into the role of the wound care nurse practitioner model in the ACT health care system.

A critical evaluation and comparison of two formative measures of system quality using criterion variables

Evaluating the validity of formative variables has presented ongoing challenges for researchers. In this paper we use global criterion measures to compare and critically evaluate two alternative formative measures of System Quality. One model is based on the ISO-9126 software quality standard, and the other is based on a leading information systems research model. We find that despite both models having a strong provenance, many of the items appear to be non-significant in our study. We examine the implications of this by evaluating the quality of the criterion variables we used, and the performance of PLS when evaluating formative models with a large number of items. We find that our respondents had difficulty distinguishing between global criterion variables measuring different aspects of overall System Quality. Also, because formative indicators “compete with one another” in PLS, it may be difficult to develop a set of measures which are all significant for a complex formative construct with a broad scope and a large number of items. Overall, we suggest that there is cautious evidence that both sets of measures are valid and largely equivalent, although questions still remain about the measures, the use of criterion variables, and the use of PLS for this type of model evaluation.

A meta-analysis of genome-wide association studies to identify prostate cancer susceptibility loci associated with aggressive and non-aggressive disease

Genome-wide association studies (GWAS) have identified multiple common genetic variants associated with an increased risk of prostate cancer (PrCa), but these explain less than one-third of the heritability. To identify further susceptibility alleles, we conducted a meta-analysis of four GWAS including 5953 cases of aggressive PrCa and 11 463 controls (men without PrCa). We computed association tests for approximately 2.6 million SNPs and followed up the most significant SNPs by genotyping 49 121 samples in 29 studies through the international PRACTICAL and BPC3 consortia. We not only confirmed the association of a PrCa susceptibility locus, rs11672691 on chromosome 19, but also showed an association with aggressive PrCa [odds ratio = 1.12 (95% confidence interval 1.03-1.21), P = 1.4 × 10(-8)]. This report describes a genetic variant which is associated with aggressive PrCa, which is a type of PrCa associated with a poorer prognosis.

Factors influencing caregiver : care receiver communication and its impact on the well-being of older care receivers

Examined communication between frail older people and their caregiving spouses (CGSs), and its relation to well-being in older care receivers. 53 community residing spousal dyads completed questionnaires about their well-being, relational satisfaction, and communication patterns. Conversations between the dyads were also videotaped and analyzed. The type of communication used by the CGSs was influenced by their sex, their earlier relationship with their spouse, and their level of well-being. CGSs who used an overly directive communication tone with their spouse were likely to be wives and CGSs who had a high degree of autonomy in their earlier relationship with their spouse. Low levels of life satisfaction and high affect balance in CGSs were associated with CGSs using a more patronizing tone. The well-being of care receivers was also related to their perceptions of their CGSs' communication. Care receivers who perceived their CGSs' communication as patronizing reported low levels of affect balance and high levels of conflict in the relationship. Findings suggest that certain characteristics of CGSs are related to the type of communication they use when conversing with their partner, although the relations are not always as expected.

Superconducting joints of Bi-2212/Ag tapes and laminates

Different types of HTS joints of Bi-2212/Ag tapes and laminates, which are fabricated by dip-coating and partial-melt processes, have been investigated. All joints are prepared using green single and laminated tapes and according to the scheme: coating-joining-processing. The heat treated tapes have critical current (Ic) between 7 and 27 A, depending on tape thickness and the number of Bi-2212 ceramic layers in laminated tapes. It is found that the current transport properties of joints depend on the type of laminate, joint configuration and joint treatment, Ic losses in joints of Bi-2212 tapes and laminates are attributed to defects in their structure, such as pores, secondary phases and misalignment of Bi-2212 grains near the Ag edges. By optimizing joint configuration, current transmission up to 100% is achieved for both single tapes and laminated tapes.