Community arts in early childhood

Community arts can take many forms, including murals, installations, festivals and performances. The work can be produced by artists solely, by artists working with community groups, or by community groups. Community arts can be on a grand-scale covering whole streets, parks or even towns, or small- scale, such as a mosaic in the corner of a play area. It can be extremely impacting and a permanent fixture, or fragile and small and designed to blow away in the wind. But, common to all these different forms of community arts are the criteria that community arts are made in, for and/or by, the local community.

A loop cancellation based active damping solution for constant power instability in vehicular power systems

In recent years, electric propulsion systems have increasingly been used in land, sea and air vehicles. The vehicular power systems are usually loaded with tightly regulated power electronic converters which tend to draw constant power. Since the constant power loads (CPLs) impose negative incremental resistance characteristics on the feeder system, they pose a potential threat to the stability of vehicular power systems. This effect becomes more significant in the presence of distribution lines between source and load in large vehicular power systems such as electric ships and more electric aircrafts. System transients such as sudden drop of converter side loads or increase of constant power requirement can cause complete system instability. Most of the existing research work focuses on the modeling and stabilization of DC vehicular power systems with CPLs. Only a few solutions are proposed to stabilize AC vehicular power systems with non-negligible distribution lines and CPLs. Therefore, this paper proposes a novel loop cancellation technique to eliminate constant power instability in AC vehicular power systems with a theoretically unbounded system stability region. Analysis is carried out on system stability with the proposed method and simulation results are presented to validate its effectiveness.

Suppression of mRNAs encoding tegument tetraspanins from schistosoma mansoni results in impaired tegument turnover

Schistosomes express a family of integral membrane proteins, called tetraspanins (TSPs), in the outer surface membranes of the tegument. Two of these tetraspanins, Sm-TSP-1 and Sm-TSP-2, confer protection as vaccines in mice, and individuals who are naturally resistant to S. mansoni infection mount a strong IgG response to Sm-TSP-2. To determine their functions in the tegument of S. mansoni we used RNA interference to silence expression of Sm-tsp-1 and Sm-tsp-2 mRNAs. Soaking of parasites in Sm-tsp dsRNAs resulted in 61% (p = 0.009) and 74% (p = 0.009) reductions in Sm-tsp-1 and Sm-tsp-2 transcription levels, respectively, in adult worms, and 67%–75% (p = 0.011) and 69%–89% (p = 0.004) reductions in Sm-tsp-1 and Sm-tsp-2 transcription levels, respectively, in schistosomula compared to worms treated with irrelevant control (luciferase) dsRNA. Ultrastructural morphology of adult worms treated in vitro with Sm-tsp-2 dsRNA displayed a distinctly vacuolated and thinner tegument compared with controls. Schistosomula exposed in vitro to Sm-tsp-2 dsRNA had a significantly thinner and more vacuolated tegument, and morphology consistent with a failure of tegumentary invaginations to close. Injection of mice with schistosomula that had been electroporated with Sm-tsp-1 and Sm-tsp-2 dsRNAs resulted in 61% (p = 0.005) and 83% (p = 0.002) reductions in the numbers of parasites recovered from the mesenteries four weeks later when compared to dsRNA-treated controls. These results imply that tetraspanins play important structural roles impacting tegument development, maturation or stability.

Modelling of a magnetocaloric system for cooling in the kilowatt range

A numerical time-dependent model of an active magnetic regenerator (AMR) was developed for cooling in the kilowatt range. Earlier numerical models have been mostly developed for cooling power in the 0.4 kW range. In contrast, this paper reports the applicability of magnetic refrigeration to the 50 kW range. A packed bed active magnetic regenerator was modelled and the influence of parameters such as geometry and operating parameters were studied for different geometries. The pressure drop for AMR bed length and particle diameter was also studied. High cooling power and coefficient of performance (COP) were achieved by optimization of the diameter of the magnetocaloric powder particles and operating frequency. The optimum operating conditions of the AMR for a cooling capacity of 50 kW was determined for a temperature span of 15 K. The predicted coefficient of performance (COP) was found to be ∼6, making it an attractive alternative to vapour compression systems.

4DCT radiotherapy for NSCLC: A review of planning methods

Purpose To establish whether the use of a passive or active technique of planning target volume (PTV) definition and treatment methods for non-small cell lung cancer (NSCLC) deliver the most effective results. This literature review assesses the advantages and disadvantages in recent studies of each, while assessing the validity of the two approaches for planning and treatment. Methods A systematic review of literature focusing on the planning and treatment of radiation therapy to NSCLC tumours. Different approaches which have been published in recent articles are subjected to critical appraisal in order to determine their relative efficacy. Results Free-breathing (FB) is the optimal method to perform planning scans for patients and departments, as it involves no significant increase in cost, workload or education. Maximum intensity projection (MIP) is the fastest form of delineation, however it is noted to be less accurate than the ten-phase overlap approach for computed tomography (CT). Although gating has proven to reduce margins and facilitate sparing of organs at risk, treatment times can be longer and planning time can be as much as 15 times higher for intensity modulated radiation therapy (IMRT). This raises issues with patient comfort and stabilisation, impacting on the chance of geometric miss. Stereotactic treatments can take up to 3 hours to treat, along with increases in planning and treatment, as well as the additional hardware, software and training required. Conclusion Four-dimensional computed tomography (4DCT) is superior to 3DCT, with the passive FB approach for PTV delineation and treatment optimal. Departments should use a combination of MIP with visual confirmation ensuring coverage for stage 1 disease. Stages 2-3 should be delineated using ten-phases overlaid. Stereotactic and gated treatments for early stage disease should be used accordingly; FB-IMRT is optimal for latter stage disease.

ZnO layers for opto-electronic applications from solution-based and low-temperature processing of an organometallic precursor

As printed and flexible plastic electronic gadgets become increasingly viable today, there is a need to develop materials that suit the fabrication processes involved. Two desirable requirements are solution-processable active materials or precursors and low-temperature processability. In this article, we describe a straightforward method of depositing ZnO films by simple spin coating of an organometallic diethylzinc precursor solution and annealing the resulting film at low temperatures (≤200 °C) without involving any synthetic steps. By controlling the humidity in which annealing is conducted, we are able to adjust the intrinsic doping level and carrier concentration in diethylzinc-derived ZnO. Doped or conducting transport layers are greatly preferable to undoped layers as they enable low-resistance contacts and minimize the potential drops. This ability to controllably realize doped ZnO is a key feature of the fabrication process that we describe in this article. We employ field-effect measurements as a diagnostic tool to measure doping levels and mobilities in ZnO and demonstrate that doped ZnO with high charge carrier concentration is ideal for solar cell applications. Respectable power conversion efficiencies (up to 4.5%) are achieved in inverted solar cells that incorporate diethylzinc-derived ZnO films as the electron transport layer and organic blends as the active material. Extensions of this approach to grow ternary and quaternary films with organometallic precursor chemicals will enable solution based growth of a number of semiconductor films as well as a method to dope them.

Digital Modeling, Integrated Project Delivery and Industry Transformation: An Australian Case Study

This research is focused on realizing productivity benefits for the delivery of transport infrastructure in the Australian construction industry through the use of building information modeling (BIM), virtual design and construction (VDC) and integrated project delivery (IPD). Specific objectives include: (I) building an understanding of the institutional environment, business systems and support mechanisms (e.g., training and skilling) which impact on the uptake of BIM/VDC; (II) gathering data to undertake a cross-country analysis of these environments; and (III) providing strategic and practical outcomes to guide the uptake of such processes in Australia. Activities which will inform this research include a review of academic literature and industry documentation, semi-formal interviews in Australia and Sweden, and a cross-country comparative analysis to determine factors affecting uptake and associated productivity improvements. These activities will seek to highlight the gaps between current-practice and best-practice which are impacting on widespread adoption of BIM/VDC and IPD. Early findings will be discussed with intended outcomes of this research being used to: inform a national public procurement strategy; provide guidelines for new contractual frameworks; and contribute to closing skill gaps. Keywords: building information modeling (BIM); virtual design and construction (VDC); integrated project delivery (IPD); transport infrastructure; Australia; procurement

Experimental and numerical study of polymeric foam efficacy in portable water filled barriers

Portable, water filled road safety barriers are used to provide protection and reduce the potential hazard due to errant vehicles in areas where the road conditions change frequently (e.g. near road work sites). As part of an effort to reduce excessive working widths typical of these systems, a study was conducted to assess the effectiveness of introducing polymeric foam filled panels into the design. Surrogate impact tests of a design typical of such as barrier system were conducted utilising a pneumatically powered horizontal impact testing machine up to impact energies of 7.40 kJ. Results of these tests are utilised to examine the barrier behaviour, in addition to being used to validate a couple FE/SPH model of the barrier system. Once validated, the FE/SPH model it utilised as the basis for a parametric study into the efficacy and effects of the inclusion of polymeric foam filled panels on the performance of portable water filled road safety barriers. It was found that extruded polystyrene foam functioned well, with a greater thickness of the foam panel significantly reducing the impacting body velocity as the barrier began to translate.

What makes e-learning work?

This chapter examines lessons learnt from a study of the use of e-learning within the rail sector in Australia and explores factors that inhibit or advance its organisational effectiveness. We examine the social, organisational and technical influences on the way employees perceive and use e-learning. By examining these issues, we aim to demonstrate that successful organisational adoption of e-learning is influenced by factors beyond the systems themselves and requires a more holistic understanding of the target workforce and the suitability of the e-learning tasks. Without a clear understanding of these relationships, organisations run the real risk of investing heavily in e-learning without receiving benefits or, worse still, impacting negatively on their ability to deliver training.

Emotional climate and behavioral management during sleep time in early childhood education settings

The majority of children cease napping between 3 and 5 years of age yet, internationally, the allocation of a sleep time during the day for children of this age remains a practice in many early childhood education (ECE) settings. These dual circumstances present a disjuncture between children's sleep needs and center practices, that may cause conflict for staff, increase stress for children and escalate negative emotional climate in the room. Testing this hypothesis requires observation of both the emotional climate and behavioral management used in ECE rooms that extends into the sleep time. This study was the first to apply the Classroom Assessment and Scoring System (CLASS) Pre-K (Pianta, La Paro, & Hamre, 2008) to observe the emotional climate and behavioral management during sleep time. Pilot results indicated that the CLASS Pre-K functioned reliably to measure emotional climate and behavioral management in sleep time. However, new sleep-specific examples of the dimensions used were developed, to help orient fieldworkers to the CLASS Pre-K rating system in the sleep time context. The CLASS was then used to assess emotional climate and behavior management between the non-sleep and sleep time sessions, in 113 ECE rooms in Queensland, Australia. In these rooms 2.114 children were observed. Of these children, 71% did not sleep at any point during the allotted sleep times. There was a significant drop in emotional climate and behavioral management between the non-sleep and sleep-time sessions. Furthermore, the duration of mandated sleep time (a period of time where no activities are provided to non-sleeping children) accounted for significant independent variance in the observed emotional climate during sleep-time. The CLASS Pre-K presents a valuable tool to assess the emotional climate and behavior management during sleep-time and draws attention to the need for further studies of sleep time in ECE settings.

Postpartum sleepiness and sleepy driving in Australian mothers

This paper reports on a prospective study investigating the prevalence of maternal postpartum fatigue and sleepiness and highlights the potential increased crash risk faced by mothers when driving in the postpartum period. Twenty-four mothers from across Australia completed a sleep and driving diary for seven consecutive days at three time points; when their baby was 6, 12 and 18 weeks old. The results showed that the mothers’ sleep varied within the sample, however on average sleep disruption and lack of sleep consolidation was experienced. A high proportion of the mothers reported fatigue and sleepiness impacting their functioning early in the postpartum period, with sleepiness being more enduring throughout the period. Of concern, a high proportion of driving journeys undertaken by the mothers were during high levels of sleepiness, particularly early in the postpartum period and during late night and early hours of the day. These findings have highlighted the need to educate mothers about the potential increased safety risk of driving during the postpartum period and identified key information that should be conveyed.

Qaphqa : fresh cut 2013 Part 1

'Qaphqa' was an outdoor artwork exhibited in the forecourt of Brisbane’s Institute of Modern Art as part of Fresh Cut exhibition series. The work took the form of a three-storey-high series of stacked 'outhouses', the seat of each opening onto the cubicle below to form what the artist referred to as a 'long drop'. Assembled in untreated pine and plywood and festooned with mock-medieval ensigns and flags, the work included a flyer containing a poem by Jorge Luis Borges and was accompanied by a published catalogue.

The hunt

"Information Thru Play: In 2010, responding to the success of The Threshold, Juxt Interactive again asked No Mimes Media, to partner in creating a transmedia experience to entertain and inform Cisco's Global Sales Force. The Hunt put employees at the center of a thriller where characters sent and responded to their emails, left phone messages, communicated through Facebook and Twitter, even asked them to retrieve items from a dead drop and to send them photographs and information. And while helping fictional characters Isabel and Keith escape an ancient secret organization, the sales force also learned about new Cisco technologies coming to market. Cisco had new demands for the 2010 experience. A geographically and culturally dispersed sales force raises challenges when it comes to introducing dozens of new products and technologies each year. Cisco wanted The Hunt to have global reach, to educate, to build collaboration, and to be fun. This demanded new ways of storytelling and new ways of thinking. The Hunt was quick and intense, unfolding in real time in just two weeks. Many experienced players were poised to participate and expectations were high. Many of the mechanics of the previous year's experience were repeated, and the audience ripped through the opening, discovering video clips and websites in minutes. The surprise was discovering Facebook and Twitter accounts, where characters responded to player postings and comments in real time. The Hunt involved audience members from countries around the world, including China, India, Netherlands, Germany, Norway, Pakistan, Japan, the United Kingdom, and the United States. It highlighted new Cisco technologies like Pulse and Mediator, painlessly engaging the audience in what those technologies do and how they work. Players collaborated across silos, creating networks of cross-disciplinary experts. The Hunt pushed the boundaries of storytelling, with events unfolding on Twitter and Facebook, and in the real world where the audience had to use social engineering to find and secure a package with vital information. With thousands of players highly engaged around the world, The Hunt once again proved that transmedia experiences can effectively be used to not only meet the goals of a brand, but entertain their audience as well."

Supporting collaboration on very large-scale interactive wall surfaces

In this paper we describe CubIT, a multi-user presentation and collaboration system installed at the Queensland University of Technology’s (QUT) Cube facility. The ‘Cube’ is an interactive visualisation facility made up of five very large-scale interactive multi-panel wall displays, each consisting of up to twelve 55-inch multi-touch screens (48 screens in total) and massive projected display screens situated above the display panels. The paper outlines the unique design challenges, features, implementation and evaluation of CubIT. The system was built to make the Cube facility accessible to QUT’s academic and student population. CubIT enables users to easily upload and share their own media content, and allows multiple users to simultaneously interact with the Cube’s wall displays. The features of CubIT were implemented via three user interfaces, a multi-touch interface working on the wall displays, a mobile phone and tablet application and a web-based content management system. Each of these interfaces plays a different role and offers different interaction mechanisms. Together they support a wide range of collaborative features including multi-user shared workspaces, drag and drop upload and sharing between users, session management and dynamic state control between different parts of the system. The results of our evaluation study showed that CubIT was successfully used for a variety of tasks, and highlighted challenges with regards to user expectations regarding functionality as well as issues arising from public use.

Paediatric Nursing in Australia

Paediatric Nursing in Australia equips students with the essential skills and knowledge to become paediatric, child and youth health nurses across a variety of clinical and community settings. It prepares students for critical thinking and problem solving within this field by emphasising contemporary issues impacting on the health of children, young people and their families. Written by a team of experienced paediatric nurses, the content is based on themes that align with Australian standards of competence and expectations of paediatric nursing: communication, family involvement and evidence-based practice. Comprehensive yet concise, the text examines the integration of theoretical and clinical components of nursing knowledge. To enhance learning, chapters feature case studies, reflection points and learning activities. An essential resource for nursing students, this text is grounded in current care delivery and professional issues for care of the child to prepare future nurses for evidence-based practice in paediatric settings throughout Australia. • Prepares students for critical thinking and problem solving within paediatric, child and youth health nursing by emphasising contemporary issues that impact on the health of children and young people and their families • Written by a team of experienced paediatric nurses • Enhances learning by providing illustrative case studies, reflection points and learning activities in each chapter