237 resultados para physical models
Resumo:
Two experiments involving 87 undergraduates examined whether happiness produces increased performance on a physical task and tested whether self-efficacy mediated the results. When mood inductions covered the full range from happy to sad, mood influenced physical performance; however, evidence regarding self-efficacy was equivocal. Efficacy for the performed task was unaffected by mood, although it remained a good predictor of performance. Since mood altered efficacy for a nonperformed but more familiar task, inconsistent efficacy results could reflect task differences. Findings offer prospects for the use of mood inductions in practical sporting situations.
Resumo:
A novel voltammetric method for simultaneous determination of the glucocorticoid residues prednisone, prednisolone, and dexamethasone was developed. All three compounds were reduced at a mercury electrode in a Britton-Robinson buffer (pH 3.78), and well-defined voltammetric waves were observed. However, the voltammograms of these three compounds overlapped seriously and showed nonlinear character, and thus, it was difficult to analyze the compounds individually in their mixtures. In this work, two chemometrics methods, principal component regression (PCR) and partial least squares (PLS), were applied to resolve the overlapped voltammograms, and the calibration models were established for simultaneous determination of these compounds. Under the optimum experimental conditions, the limits of detection (LOD) were 5.6, 8.3, and 16.8 µg l-1 for prednisone, prednisolone, and dexamethasone, respectively. The proposed method was also applied for the determination of these glucocorticoid residues in the rabbit plasma and human urine samples with satisfactory results.
Resumo:
A fast and accurate procedure has been researched and developed for the simultaneous determination of maltol and ethyl maltol, based on their reaction with iron(III) in the presence of o-phenanthroline in sulfuric acid medium. This reaction was the basis for an indirect kinetic spectrophotometric method, which followed the development of the pink ferroin product (λmax = 524 nm). The kinetic data were collected in the 370–900 nm range over 0–30 s. The optimized method indicates that individual analytes followed Beer’s law in the concentration range of 4.0–76.0 mg L−1 for both maltol and ethyl maltol. The LOD values of 1.6 mg L−1 for maltol and 1.4 mg L−1 for ethyl maltol agree well with those obtained by the alternative high performance liquid chromatography with ultraviolet detection (HPLC-UV). Three chemometrics methods, principal component regression (PCR), partial least squares (PLS) and principal component analysis–radial basis function–artificial neural networks (PC–RBF–ANN), were used to resolve the measured data with small kinetic differences between the two analytes as reflected by the development of the pink ferroin product. All three performed satisfactorily in the case of the synthetic verification samples, and in their application for the prediction of the analytes in several food products. The figures of merit for the analytes based on the multivariate models agreed well with those from the alternative HPLC-UV method involving the same samples.
Resumo:
A spectrophotometric method for the simultaneous determination of the important pharmaceuticals, pefloxacin and its structurally similar metabolite, norfloxacin, is described for the first time. The analysis is based on the monitoring of a kinetic spectrophotometric reaction of the two analytes with potassium permanganate as the oxidant. The measurement of the reaction process followed the absorbance decrease of potassium permanganate at 526 nm, and the accompanying increase of the product, potassium manganate, at 608 nm. It was essential to use multivariate calibrations to overcome severe spectral overlaps and similarities in reaction kinetics. Calibration curves for the individual analytes showed linear relationships over the concentration ranges of 1.0–11.5 mg L−1 at 526 and 608 nm for pefloxacin, and 0.15–1.8 mg L−1 at 526 and 608 nm for norfloxacin. Various multivariate calibration models were applied, at the two analytical wavelengths, for the simultaneous prediction of the two analytes including classical least squares (CLS), principal component regression (PCR), partial least squares (PLS), radial basis function-artificial neural network (RBF-ANN) and principal component-radial basis function-artificial neural network (PC-RBF-ANN). PLS and PC-RBF-ANN calibrations with the data collected at 526 nm, were the preferred methods—%RPET not, vert, similar 5, and LODs for pefloxacin and norfloxacin of 0.36 and 0.06 mg L−1, respectively. Then, the proposed method was applied successfully for the simultaneous determination of pefloxacin and norfloxacin present in pharmaceutical and human plasma samples. The results compared well with those from the alternative analysis by HPLC.
Resumo:
This paper addresses the following problem: given two or more business process models, create a process model that is the union of the process models given as input. In other words, the behavior of the produced process model should encompass that of the input models. The paper describes an algorithm that produces a single configurable process model from an arbitrary collection of process models. The algorithm works by extracting the common parts of the input process models, creating a single copy of them, and appending the differences as branches of configurable connectors. This way, the merged process model is kept as small as possible, while still capturing all the behavior of the input models. Moreover, analysts are able to trace back from which original model(s) does a given element in the merged model come from. The algorithm has been prototyped and tested against process models taken from several application domains.
Resumo:
Heart disease is attributed as the highest cause of death in the world. Although this could be alleviated by heart transplantation, there is a chronic shortage of donor hearts and so mechanical solutions are being considered. Currently, many Ventricular Assist Devices (VADs) are being developed worldwide in an effort to increase life expectancy and quality of life for end stage heart failure patients. Current pre-clinical testing methods for VADs involve laboratory testing using Mock Circulation Loops (MCLs), and in vivo testing in animal models. The research and development of highly accurate MCLs is vital to the continuous improvement of VAD performance. The first objective of this study was to develop and validate a mathematical model of a MCL. This model could then be used in the design and construction of a variable compliance chamber to improve the performance of an existing MCL as well as form the basis for a new miniaturised MCL. An extensive review of literature was carried out on MCLs and mathematical modelling of their function. A mathematical model of a MCL was then created in the MATLAB/SIMULINK environment. This model included variable features such as resistance, fluid inertia and volumes (resulting from the pipe lengths and diameters); compliance of Windkessel chambers, atria and ventricles; density of both fluid and compressed air applied to the system; gravitational effects on vertical columns of fluid; and accurately modelled actuators controlling the ventricle contraction. This model was then validated using the physical properties and pressure and flow traces produced from a previously developed MCL. A variable compliance chamber was designed to reproduce parameters determined by the mathematical model. The function of the variability was achieved by controlling the transmural pressure across a diaphragm to alter the compliance of the system. An initial prototype was tested in a previously developed MCL, and a variable level of arterial compliance was successfully produced; however, the complete range of compliance values required for accurate physiological representation was not able to be produced with this initial design. The mathematical model was then used to design a smaller physical mock circulation loop, with the tubing sizes adjusted to produce accurate pressure and flow traces whilst having an appropriate frequency response characteristic. The development of the mathematical model greatly assisted the general design of an in vitro cardiovascular device test rig, while the variable compliance chamber allowed simple and real-time manipulation of MCL compliance to allow accurate transition between a variety of physiological conditions. The newly developed MCL produced an accurate design of a mechanical representation of the human circulatory system for in vitro cardiovascular device testing and education purposes. The continued improvement of VAD test rigs is essential if VAD design is to improve, and hence improve quality of life and life expectancy for heart failure patients.
Resumo:
A few studies examined interactive effects between air pollution and temperature on health outcomes. This study is to examine if temperature modified effects of ozone and cardiovascular mortality in 95 large US cities. A nonparametric and a parametric regression models were separately used to explore interactive effects of temperature and ozone on cardiovascular mortality during May and October, 1987-2000. A Bayesian meta-analysis was used to pool estimates. Both models illustrate that temperature enhanced the ozone effects on mortality in the northern region, but obviously in the southern region. A 10-ppb increment in ozone was associated with 0.41 % (95% posterior interval (PI): -0.19 %, 0.93 %), 0.27 % (95% PI: -0.44 %, 0.87 %) and 1.68 % (95% PI: 0.07 %, 3.26 %) increases in daily cardiovascular mortality corresponding to low, moderate and high levels of temperature, respectively. We concluded that temperature modified effects of ozone, particularly in the northern region.
Resumo:
This paper reports the application of multicriteria decision making techniques, PROMETHEE and GAIA, and receptor models, PCA/APCS and PMF, to data from an air monitoring site located on the campus of Queensland University of Technology in Brisbane, Australia and operated by Queensland Environmental Protection Agency (QEPA). The data consisted of the concentrations of 21 chemical species and meteorological data collected between 1995 and 2003. PROMETHEE/GAIA separated the samples into those collected when leaded and unleaded petrol were used to power vehicles in the region. The number and source profiles of the factors obtained from PCA/APCS and PMF analyses were compared. There are noticeable differences in the outcomes possibly because of the non-negative constraints imposed on the PMF analysis. While PCA/APCS identified 6 sources, PMF reduced the data to 9 factors. Each factor had distinctive compositions that suggested that motor vehicle emissions, controlled burning of forests, secondary sulphate, sea salt and road dust/soil were the most important sources of fine particulate matter at the site. The most plausible locations of the sources were identified by combining the results obtained from the receptor models with meteorological data. The study demonstrated the potential benefits of combining results from multi-criteria decision making analysis with those from receptor models in order to gain insights into information that could enhance the development of air pollution control measures.
Resumo:
High time resolution aerosol mass spectrometry measurements were conducted during a field campaign at Mace Head Research Station, Ireland, in June 2007. Observations on one particular day of the campaign clearly indicated advection of aerosol from volcanoes and desert plains in Iceland which could be traced with NOAA Hysplit air mass back trajectories and satellite images. In conjunction with this event, elevated levels of sulphate and light absorbing particles were encountered at Mace Head. While sulphate concentration was continuously increasing, nitrate levels remained low indicating no significant contribution from anthropogenic pollutants. Sulphate concentration increased about 3.8 g/m3 in comparison with the background conditions. Corresponding sulphur flux from volcanic emissions was estimated to about 0.3 TgS/yr, suggesting that a large amount of sulphur released from Icelandic volcanoes may be distributed over distances larger than 1000 km. Overall, our results corroborate that transport of volcanogenic sulphate and dust particles can significantly change the chemical composition, size distribution, and optical properties of aerosol over the North Atlantic Ocean and should be considered accordingly by regional climate models.
Resumo:
Childcare workers play a significant role in the learning and development of children in their care. This has major implications for the training of workers. Under new reforms of the childcare industry the Australian government now requires all workers to obtain qualifications from a vocational education and training provider (eg. Technical and Further Education) or university. Effective models of employment-based training are critical to provide training to highly competent workers. This paper presents findings from a study that examined current and emerging models of employment-based training in the childcare sector, particularly at the Diploma level. Semi-structured interviews were conducted with a sample of 16 participants who represented childcare directors, employers, and workers located in childcare services in urban, regional and remote locations in the State of Queensland. The study proposes a ‘best-fit’ employment-based training approach that is characterised by a compendium of five models instead of a ‘one size fits all’. Issues with successful implementation of the EBT models are also discussed
Resumo:
Purpose: Physical activity has become a focus of cancer recovery research as it has the potential to reduce treatment-related burden and optimize health-related quality of life (HRQoL). However, the potential for physical activity to influence recovery may be age-dependent. This paper describes physical activity levels and HRQoL among younger and older women after surgery for breast cancer and explores the correlates of physical inactivity. Methods: A population-based sample of breast cancer patients diagnosed in South-East Queensland, Australia, (n=287) were assessed once every three months, from 6 to 18 months post-surgery. The Functional Assessment of Cancer Therapy-Breast questionnaire (FACTB+4) and items from the Behavioral Risk Factor Surveillance System (BRFSS) questionnaire were used to measure HRQoL and physical activity, respectively. Physical activity was assigned metabolic equivalent task (MET) values, and categorized as < 3, 3 to 17.9 and 18+ MET-hours/weeks. Descriptive statistics, generalized linear models with age stratification (<50 years versus 50+ years), and logistic regression were used for analyses (p=0.05, two-tailed). Results: Younger women who engaged in 3 or more MET-hours/week of physical activity reported a higher HRQoL at 18 months compared to their more sedentary counterparts (p<0.05). Older women reported similar HRQoL irrespective of activity level and consistently reported clinically higher HRQoL than younger women. Increasing age, being overweight or obese, and restricting use of the treated side at six months post-surgery increased the likelihood of sedentary behavior (OR>3, p<0.05). Conclusions: Age influences the potential to observe HRQoL benefits related to physical activity participation. These results also provide relevant information for the design of exercise interventions for breast cancer survivors and highlights that some groups of women are at greater risk of long-term sedentary behavior.
Resumo:
Purpose Increased physical activity in colorectal cancer patients is related to improved recurrence free and overall survival. Psychological distress after cancer may place patients at risk of reduced physical activity; but paradoxically also act as a motivator for positive lifestyle change. The relationship between psychological distress and physical activity after cancer over time has not been described. Methods A prospective survey of 1966 (57% response) colorectal cancer survivors assessed the psychological distress variables of anxiety, depression, somatisation, cancer threat appraisal as predictors of physical activity five, 12, 24 and 36 months post-diagnosis 978 respondents had valid data for all time points. Results Higher somatisation was associated with greater physical inactivity (Relative risk ratio (RRR) =1.12; 95% CI=[1.1, 1.2]) and insufficient physical activity (RRR=1.05; [0.90, 1.0]). Respondents with a more positive appraisal of their cancer were significantly (p=0.031) less likely to be inactive (RRR=0.95; [0.90, 1.0]) or insufficiently active (RRR=0.96). Fatigued and obese respondents and current smokers were more inactive. Respondents whose somatisation increased between two time periods were less likely to increase their physical activity over the same period (p<0.001). Respondents with higher anxiety at one time period were less likely to have increased their activity at the next assessment (p=0.004). There was no association between depression and physical activity. Conclusions Cancer survivors who experience somatisation and anxiety are at greater risk of physical inactivity. The lack of a clear relationship between higher psychological distress and increasing physical activity argues against distress as a motivator to exercise in these patients.