From evidence to action: a shared leadership approach

This paper proposes an organisational effectiveness model that applies the theoretical frameworks of shared leadership, appreciative inquiry, and knowledge creation. Similar to many libraries worldwide, Auraria Library technical services department struggled to establish efficient and effective workflow for electronic resources management. The library purchased an Electronic Resource Management System, as the literature suggests; however, this technology-enabled system did not resolve workflow issues. The Auraria Library case study demonstrates that a technical services division can successfully reorganize personnel, reassign responsibilities, and measure outcomes within an evidencebased shared leadership culture, which invites and enables participants to identify problems and create solutions amidst a dynamically changing electronic resources environment.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Arguing the Autopsy : mutual suspicion, jurisdictional confusion and the socially marginal

Vulnerable and marginalised populations are not only over-represented in the criminal justice system, but also in civil jurisdictions like the coronial system. Moreover, many of the personnel who deal with criminal matters, especially in rural and regional areas, are also those who manage the coronial death investigation. This movement back and forth between civil and criminal jurisdictions is difficult for the both professional personnel and the families, but especially for those families who may also have had dealings with these personnel in the criminal justice system, or who present as suspicious due to larger historical and global issues. While coronial legislation now allows families to raise cultural and religious concerns about the process, particularly to do with the autopsy of their loved one, this also requires them to identify themselves to police at the initial stage of the death investigation. This paper, part of a larger body of work on autopsy decision making, discusses the ways in which this information is gathered by police, how it is communicated through the system, the ways in which families are supported through the process, and the difficulties that ensue.

Constructions of children's needs in informal kinship care in rural China

Kinship care is the oldest form of alternative child care in the world. Recent years have witnessed a significant increase in the number of children being placed in kinship care across Western countries. However, in contrast to rapid knowledge advances about formal kinship care, far less is known about the needs of children in informal kinship care, especially in Asian contexts. This thesis and the study upon which it is formed sought to redress this knowledge gap. Qualitative approach was adopted to explore social constructions of children in informal kinship care in rural China. Parents in China seeking work in cities have left behind around 58 million rural children, mostly with relatives and without the involvement of the state. The present study examined caregivers’ and school personnel’s understandings of these school-age children’s needs through semi-structured interviews with 23 kin caregivers and five school personnel in Shijiapu Town, Jilin Province, China. The central question that guided the whole study is: What are the needs of children in informal kinship care in rural Jilin Province, China? Interpretative Phenomenological Analysis was used to categorise and interpret the qualitative data. Based on participants’ constructions, this study developed a need model with eight themes. They are: (1) emotional needs and mental health, (2) relationships, (3) empowerment and agency, (4) safety, (5) education, (6) basic care, (7) physical health, and (8) personal development. These needs are grounded in the Chinese context, and therefore a good understanding of Chinese culture is essential to address them. The first four needs particularly capture children’s separations from their parents, and the rest are more general, and can be applied to most Chinese children. To meet the most important need for children left behind, namely education, these caregivers determined that others needs sometimes have to be compromised. Children left behind are a vulnerable group in contemporary rural China, and their diverse needs are attended to by several groups. This study found that as children’s closest kin while their parents are away, caregivers play a vital role in salving the children’s emotional loss. Caregivers’ love and familial obligations strongly motivate them to care for these children, and sensitivity to social stigma makes them strive to show their love and care to compensate for perceived differences between these children and their peers. Caregivers’ efforts to make children happy, however, were sometimes criticised by some school personnel, who see this as spoiling. The conflicting viewpoint between caregivers and school personnel indicate their different roles and perceptions in children’s lives, and the latter influence these children in a more authoritative way. Informal kinship care has several advantages of addressing children’s needs, especially their needs for emotional bonds with family. Community-based kin networks provide children with both emotional and material support. However, these advantages sometimes are restricted by caregivers’ child rearing capacity. Having developed a model of the needs of children left behind in China, this study suggests that caregivers, school personnel and government social services work in harmony to be child-centred and meet these children’s diverse needs. The unmet needs of children left behind mainly result from unbalanced development between urban and rural China, therefore, it is imperative to enhance state policies and programs that improve wellbeing for this growing part of China’s people.

YAWL4Industry : reflections on using YAWL for industry projects

The Yet Another Workflow Language (YAWL) language and environment has been used to prototype, verify, execute and analyse business processes in a wide variety of industrial domains, such as telephony, construction, supply chain, insurance services, medical environments, personnel management and the creative arts. These engagements offer the YAWL researcher community a great opportunity to validate our research findings within an industry setting, as well as discovery of possible enhancements from the end user perspective. This paper describes three such industry projects, discusses why YAWL was chosen and how it was used in each, and reacts on the insights gained along the way.

Urinary biomolecular indicators of exercise-induced over exertion injury

Poor health and injury represent major obstacles to the future economic security of Australia. The national economic cost of work-related injury is estimated at $57.5 billion p/a. Since exposure to high physical demands is a major risk factor for musculoskeletal injury, monitoring and managing such physical activity levels in workers is a potentially important injury prevention strategy. Current injury monitoring practices are inadequate for the provision of clinically valuable information about the tissue specific responses to physical exertion. Injury of various soft tissue structures can manifest over time through accumulation of micro-trauma. Such micro-trauma has a propensity to increase the risk of acute injuries to soft-tissue structures such as muscle or tendon. As such, the capacity to monitor biomarkers that result from the disruption of these tissues offers a means of assisting the pre-emptive management of subclinical injury prior to acute failure or for evaluation of recovery processes. Here we have adopted an in-vivo exercise induced muscle damage model allowing the application of laboratory controlled conditions to assist in uncovering biochemical indicators associated with soft-tissue trauma and recovery. Importantly, urine was utilised as the diagnostic medium since it is non-invasive to collect, more acceptable to workers and less costly to employers. Moreover, it is our hypothesis that exercise induced tissue degradation products enter the circulation and are subsequently filtered by the kidney and pass through to the urine. To test this hypothesis a range of metabolomic and proteomic discovery-phase techniques were used, along with targeted approaches. Several small molecules relating to tissue damage were identified along with a series of skeletal muscle-specific protein fragments resulting from exercise induced soft-tissue damage. Each of the potential biomolecular markers appeared to be temporally present within urine. Moreover, the regulation of abundance seemed to be associated with functional recovery following the injury. This discovery may have important clinical applications for monitoring of a variety of inflammatory myopathies as well as novel applications in monitoring of the musculoskeletal health status of workers, professional athletes and/or military personnel to reduce the onset of potentially debilitating musculoskeletal injuries within these professions.

Understanding worker perceptions of common incidents at roadworks in Queensland

The process of building safer roads and roadsides needs to be managed to minimise risks to both the road using public and roadworkers. However, detailed and accurate data on fatalities and injuries at roadworks across Australia are not available. The lack of reliable safety records and consequent poor understanding of the hazards at roadworks motivated this research to examine the common trends in incidents and to understand workers' perceptions of the causes of incidents at roadworks. To achieve these aims, 66 roadworks personnel were interviewed in Queensland including road construction workers, traffic controllers, engineers, and managers. Qualitative analyses identified several major issues and themes. Vehicles driving into work areas, traffic controllers hit by vehicles, rear end crashes at roadwork approaches, and reversing incidents involving work vehicles and machinery were the most common types of incidents. Roadworkers perceived driver errors, such as violation of speed limits, distracted driving, and ignoring signage and traffic controllers' instructions as the main causes of the incidents.

A data mining framework for relevance feature discovery

This thesis is a study for automatic discovery of text features for describing user information needs. It presents an innovative data-mining approach that discovers useful knowledge from both relevance and non-relevance feedback information. The proposed approach can largely reduce noises in discovered patterns and significantly improve the performance of text mining systems. This study provides a promising method for the study of Data Mining and Web Intelligence.

Vocational education in science, technology, engineering and maths (STEM) : Curriculum innovation through school industry partnerships

Governments have recognised that the technological trades rely on knowledge embedded traditionally in science, technology, engineering and mathematics (STEM) disciplines. However, there is substantial evidence that students are turning away from these subjects in schools because the school curriculum is seen as irrelevant, with clear implications for not just vocational education but also higher education. In this paper, we report preliminary findings on the development of two curricula that attempt to integrate science and mathematics with workplace knowledge and practices. We argue that these curricula provide educational opportunities for students to pursue their preferred career pathways. These curricula were co-developed by industry and educational personnel across three industry sectors, namely, mining industry, aerospace and wine tourism. The aim was to provide knowledge appropriate for students moving from school to the workplace as trade apprentices in the respective industries. The analysis of curriculum and associated policy documents reveals that the curricula adopt applied learning orientations through teaching strategies and assessment practices which focus on practical skills. However, although key theoretical science and maths concepts have been well incorporated, the extent to which knowledge deriving from workplace practices is included varies across the curricula. The extent to which applications of concepts are included in the models depends on a number of factors not least the relevant expertise of the teacher as a practitioner in the industry. Our findings highlight the importance of teachers having substantial practical industry experience and the role that whole school policies play in attempts to align the range of learning experiences with the needs of industry.

Green skills for the construction industry

The skill shortage issues have long existed in the construction industry in countries like Australia. Couple this with the lead and lag time between market demand and resultant supply has traditionally seen cyclical fluctuation of skills demand within the construction industry. Skills demand and shortages are generally well documented and can even have a level of predictability in Australia given the tendency to have a delayed reaction to global economic downturns. Sustainability issues in the construction industry have attracted growing public awareness. Traditionally driven by ever increasing, if only gradual, mandated minimum requirements, drive towards sustainable developments is now increasingly being created by the client. As this demand increases, accordingly a demand for people with the skills to provide these services should be felt. This research examines the green skill shortage issues within the context of construction industry. Stakeholders from across relevant sectors of the built environment were engaged to ascertain the industry’s utilisation and demand for ‘green skilled’ personnel. These findings will assist stakeholders within the construction industry in negating the effects of a skills shortage in the event of accelerated demand for sustainable construction.

Learning about being effective mentors : professional learning communities and mentoring

This study aimed to explore experienced mentors’ understandings about professional learning communities (PLCs), mentoring and leadership. This research analyses audio-taped transcripts and written responses from 27 experienced mentors who operate in varied roles (e.g., university academics, school executives, teachers, learning support personnel). Findings indicated that PLCs can provide professional renewal for existing teachers and that mentoring within PLCs can further advance knowledge about effective practices. PLCs can include other staff members and key stakeholders (e.g., preservice teachers, teacher aides) who can contribute to the learning within the group. Mentoring and PLCs can be cost-effective strategic levers for advancing professional knowledge.

A survey of the Queensland healthcare workforce : attitudes towards dementia care and training

Background Positive attitudes of healthcare staff towards people with dementia promote higher quality care, although little is known about important factors that underlie positive attitudes. Key aims of this project were to explore the relationships between staff attitudes towards dementia, self-confidence in caring for people with dementia, experience and dementia education and training. Method A brief online survey was developed and widely distributed to registered nurses and allied health professionals working in Queensland in 2012. Regression analyses were performed to identify important predictors of self-confidence in caring for people with dementia and positive attitudes towards people with dementia. Results Five hundred and twenty-four surveys were completed by respondents working in a range of care settings across Queensland. Respondents were predominantly female (94.1%), and most were registered nurses (60%), aged between 41 and 60 years (65.6%). Around 40% regularly worked with people with dementia and high levels of self-confidence in caring for this population and positive attitudes towards people with dementia were reported. The majority of respondents (67%) had participated in a dementia education/training activity in the past 12 months. More experience working with people with dementia predicted greater self-confidence while recent participation in a dementia education/training and higher self-confidence in caring for a person with dementia significantly predicted more positive attitudes towards people with dementia. Conclusion These results confirm the importance of self-confidence and dementia education in fostering positive attitudes and care practices towards people with dementia. Our results also indicate that the demand for ongoing dementia education is high amongst health care workers and it is recommended that regular dementia education/ training be provided and promoted for all healthcare personnel who work with people with dementia.

A data mining approach to improve the automated quality of data

This thesis describes the development of a robust and novel prototype to address the data quality problems that relate to the dimension of outlier data. It thoroughly investigates the associated problems with regards to detecting, assessing and determining the severity of the problem of outlier data; and proposes granule-mining based alternative techniques to significantly improve the effectiveness of mining and assessing outlier data.

Reconciling folksonomic tagging with taxa for bioacoustic annotations

Acoustic sensors are increasingly used to monitor biodiversity. They can remain deployed in the environment for extended periods to passively and objectively record the sounds of the environment. The collected acoustic data must be analyzed to identify the presence of the sounds made by fauna in order to understand biodiversity. Citizen scientists play an important role in analyzing this data by annotating calls and identifying species. This paper presents our research into bioacoustic annotation techniques. It describes our work in defining a process for managing, creating, and using tags that are applied to our annotations. This paper includes a detailed description of our methodology for correcting and then linking our folksonomic tags to taxonomic data sources. Providing tools and processes for maintaining species naming consistency is critical to the success of a project designed to generate scientific data. We demonstrate that cleaning the folksonomic data and providing links to external taxonomic authorities enhances the scientific utility of the tagging efforts of citizen scientists.

The power of hands-on exercises in SCADA cyber security education

For decades Supervisory Control and Data Acquisition (SCADA) and Industrial Control Systems (ICS) have used computers to monitor and control physical processes in many critical industries, including electricity generation, gas pipelines, water distribution, waste treatment, communications and transportation. Increasingly these systems are interconnected with corporate networks via the Internet, making them vulnerable and exposed to the same risks as those experiencing cyber-attacks on a conventional network. Very often SCADA networks services are viewed as a specialty subject, more relevant to engineers than standard IT personnel. Educators from two Australian universities have recognised these cultural issues and highlighted the gap between specialists with SCADA systems engineering skills and the specialists in network security with IT background. This paper describes a learning approach designed to help students to bridge this gap, gain theoretical knowledge of SCADA systems' vulnerabilities to cyber-attacks via experiential learning and acquire practical skills through actively participating in hands-on exercises.