Integrating engineering education within the elementary and middle school mathematics curriculum

Many nations are experiencing a decline in the number of graduating engineers, an overall poor preparedness for engineering studies in tertiary institutions, and a lack of diversity in the field. Given the increasing importance of mathematics, science, engineering, and technology in our world, it is imperative that we foster an interest and drive to participate in engineering from an early age. This discussion paper argues for the integration of engineering education within the elementary and middle school mathematics curricula. In doing so, we offer a definition of engineering education and address its core goals; consider some perceptions of engineering and engineering education held by teachers and students; and offer one approach to promoting engineering education within the elementary and middle school mathematics curriculum, namely through mathematical modeling.

Illegal pedestrian crossing at signalised intersections : Incidence and relative risk

Illegal pedestrian behaviour is common and is reported as a factor in many pedestrian crashes. Since walking is being promoted for its health and environmental benefits, minimisation of its associated risks is of interest. The risk associated with illegal road crossing is unclear, and better information would assist in setting a rationale for enforcement and priorities for public education. An observation survey of pedestrian behaviour was conducted at signalised intersections in the Brisbane CBD (Queensland, Australia) on typical workdays, using behavioural categories that were identifiable in police crash reports. The survey confirmed high levels of crossing against the lights, or close enough to the lights that they should legally have been used. Measures of exposure for crossing legally, against the lights, and close to the lights were generated by weighting the observation data. Relative risk ratios were calculated for these categories using crash data from the observation sites and adjacent midblocks. Crossing against the lights and crossing close to the lights both exhibited a crash risk per crossing event approximately eight times that of legal crossing at signalised intersections. The implications of these results for enforcement and education are discussed, along with the limitations of the study.

Exercise for health : a breast cancer recovery program - quality of life benefits [Conference Abstract]

Introduction: Five-year survival from breast cancer in Australia is 87%. Hence, ensuring a good quality of life (QOL) has become a focal point of cancer research and clinical interest. Exercise during and after treatment has been identified as a potential strategy to optimise QOL of women diagnosed with breast cancer.----- Methods: Exercise for Health is a randomised controlled trial of an eight-month, exercise intervention delivered by Exercise Physiologists. An objective of this study was to assess the impact of the exercise program during and following treatment on QOL. Queensland women diagnosed with unilateral breast cancer in 2006/07 were eligible to participate. Those living in urban-Brisbane (n=194) were allocated to either the face-to-face exercise group, the telephone exercise group, or the usual-care group, and those living in rural Queensland (n=143) were allocated to the telephone exercise group or the usual-care group. QOL, as assessed by the Functional Assessment of Cancer Therapy-Breast (FACT-B+4) questionnaire, was measured at 4-6 weeks (pre-intervention), 6 months (mid-intervention) and 12 months (three months post-intervention) post-surgery.----- Results: Significant (P<0.01) increases in QOL were observed between pre-intervention and three months post-intervention 12 months post-surgery for all women. Women in the exercise groups experienced greater mean positive changes in QOL during this time (+10 points) compared with the usual-care groups (+5 to +7 points) after adjusting for baseline QOL. Although all groups experienced an overall increase in QOL, approximately 20% of urban and rural women in the usual-care groups reported a decline in QOL, compared with 10% of women in the exercise groups.----- Conclusions: This work highlights the potential importance of participating in physical activity to optimise QOL following a diagnosis of breast cancer. Results suggest that the telephone may be an effective medium for delivering exercise counselling to newly diagnosed breast cancer patients.

In-vehicle driver distractions : characteristics underlying drivers' risk perceptions

Driver distraction continues to receive considerable research interest but the drivers‟ perspective is less well documented. The current research focussed on identifying features that are salient to drivers in their risk perception judgements for 19 in-vehicle distractions. Both technological (e.g. mobile phones) and non technological (e.g. eating) distractions were considered. Analysis identified that males and females were rating 7 of the 19 distractions differently. The current paper presents the data for the female participants (n = 84). Multidimensional scaling analysis identified three main dimensions contributing to female drivers‟ risk perception judgements. Qualitative characteristics such as the level of exposure to a distraction were identified as significant contributors to drivers‟ risk perception as well as features inherent in the distractions such as distractions being related to communication. This exploratory work contributes to better understanding female drivers‟ perceptions of risk associated with in-vehicle distractions. Understanding the drivers‟ perspective can help guide the development of road safety messages and ultimately improve the impact of such messages.

Longitudinal patterns of weight in women diagnosed with breast cancer [Conference Abstract]

Introduction: Weight gain is a common concern following breast cancer and has been associated with negative health outcomes. As such, prevention of weight gain is of clinical interest. This work describes weight change between 6- and 18-months following a breast cancer diagnosis and explores the personal, treatment and behavioural characteristics associated with gains in weight. Methods: Body mass index was objectively assessed, at three-monthly intervals, on a population-based sample of women newly diagnosed with unilateral breast cancer (n=185). Changes in BMI between 6- and 18-months post-diagnosis were calculated, with gains of one or more being considered clinically detrimental to future health. Results: Approximately 60% of participants were overweight or obese at 6-months post-diagnosis. While BMI remained relatively stable across the testing period (range=27.3-27.8), 24% of participants experienced clinically relevant gains in BMI (median gains=1.9). Following adjustment for potential confounders, younger age (<45 years; Odds ratio, OR=9.8), being morbidly obese at baseline (OR=4.6) and receiving hormone therapy (OR=4.8) were characteristics associated with an increased odds (p<0.05) of gaining BMI. Other characteristics associated with gains in BMI were more extensive surgery and having a history of smoking, although these relationships were not supported statistically. In contrast, caring for younger children was associated with reduced risk of gaining BMI (OR=0.3, p=0.20). Conclusions: Clinically relevant weight gain between 6- and 18-months post-breast cancer diagnosis is an issue for one in four women, with certain subgroups being particularly susceptible. However, the majority of women diagnosed with breast cancer are overweight or obese and gains in body weight are common. Thus, interventions that address the importance of achieving and sustaining a healthy body weight, delivered to all women with breast cancer, may have greater public health impact than interventions targeting any specific breast cancer subgroup.

Attitudes and interests towards biotechnology: The mismatch between students and teachers

Increasing the scientific literacy of Australians has become an educational priority in recent times. The ‘Science State – Smart State’ initiative of the Queensland Government involves an action plan for improving science education that includes a Science for Life action. A desired outcome is for an increased understanding of the natural world so that responsible decisions concerning our future wellbeing can be made in an age of science and technology. Biotechnology is a technology that is having profound impact on our lives. This paper describes how 15-16 year old students and biology teachers revealed a mismatch in both attitudes and interests towards biotechnology between the students and teachers. The findings are of interest as the teachers are writing biotechnology into their work programs in response to new syllabus documents. The teacher’s areas of interest did not match those of the students, possibly resulting in a curriculum the teachers want to teach, but the students do not want to learn.

Theories and ideas you just have to know about - Introduction

Theories provide us with a frame of reference or model of how something works. Theoreticians who focus on the human state try to make a best-fit model. They try to imagine a typical case and generate a set of frameworks that might assist us to predict behaviour or some outcome, or simply explain how things work. They aim to understand how elements of interest might impact upon each other, and give rise to or predict behavioural, emotional, moral, physical, cognitive or social change for individuals and groups. Theories help give us insight. However, theories do not provide the templates for growth and change. They are simply someone’s informed and researched view regarding what might happen as people grow and interact with the physical and social world.

Mainstreaming sustainability into pre-service teacher edcuation in Australia

There is a growing interest in and support for education for sustainability in Australian schools. Australian Government schemes such as the Australian Sustainable Schools Initiative (AuSSI), along with strategies such as Educating for a Sustainable Future: A National Environmental Education Statement for Australian Schools(NEES(Australian Government and Curriculum Corporation (2005) and Living Sustainably: The Australian Government’s National Action Plan for Education for Sustainability (Australian Government 2009), recognise the need and offer support for education for sustainability in Australian schools. The number of schools that have engaged with AuSSI indicates that this interest also exists within Australian schools. Despite this, recent research indicates that pre-service teacher education institutions and programs are not doing all they can to prepare teachers for teaching education for sustainability or for working within sustainable schools. The education of school teachers plays a vital role in achieving changes in teaching and learning in schools. Indeed, the professional development of teachers in education for sustainability has been identified as ‘the priority of priorities’. Much has been written about the need to ‘reorient teacher education towards sustainability’. Teacher education is seen as a key strategy that is yet to be effectively utilised to embed education for sustainability in schools. Mainstreaming sustainability in Australian schools will not be achieved without the preparation of teachers for this task. The Mainstreaming Sustainability model piloted in this study seeks to engage a range of stakeholder organisations and key agents of change within a system to all work simultaneously to bring about a change, such as the mainstreaming of sustainability. The model is premised on the understanding that sustainability will be mainstreamed within teacher education if there is engagement with key agents of change across the wider teacher education system and if the key agents of change are ‘deeply’ involved in making the change. The model thus seeks to marry broad engagement across a system with the active participation of stakeholders within that system. Such a systemic approach is a way of bringing together diverse viewpoints to make sense of an issue and harness that shared interpretation to define boundaries, roles and relationships leading to a better defined problem that can be acted upon more effectively. Like action research, the systemic approach is also concerned with modelling change and seeking plausible solutions through collaboration between stakeholders. This is important in ensuring that outcomes are useful to the researchers/stakeholders and the system being researched as it creates partnerships and commitments to the outcomes by stakeholder participants. The study reported on here examines whether the ‘Mainstreaming Sustainability’ model might be effective as a means to mainstream sustainability in pre-service teacher education. This model, developed in an earlier study, was piloted in the Queensland teacher education system in order to examine its effectiveness in creating organisational and systemic change. The pilot project in Queensland achieved a number of outcomes. The project: • provided useful insights into the effectiveness of the Mainstreaming Sustainability model in bringing about change while also building research capacity within the system • developed capacities within the teacher education community: o developing competencies in education for sustainability o establishing more effective interactions between decision-makers and other stakeholders o establishing a community of inquiry • changed teaching and learning approaches used in participating teacher education institutions through: o curriculum and resource development o the adoption of education for sustainability teaching and learning processes o the development of institutional policies • improved networks within the teacher education system through: o identifying key agents of change within the system o developing new, and building on existing, partnerships between schools, teacher education institutions and government agencies • engaged relevant stakeholders such as government agencies and non-government organisations to understand and support the change Our findings indicate that the Mainstreaming Sustainability model is able to facilitate organisational and systemic change – over time – if: • the individuals involved have the conceptual and personal capacities needed to facilitate change, that is, to be a key agent of change • stakeholders are engaged as participants in the process of change, not simply as ‘interested parties’ • there is a good understanding of systemic change and the opportunities for leveraging change within systems. In particular, in seeking to mainstream sustainability in pre-service teacher education in Queensland it has become clear that one needs to build capacity for change within participants such as knowledge of education for sustainability, conceptual skills in systemic thinking, action research and organisational change, and leadership skills. It is also of vital importance that key agents of change – those individuals who are ‘hubs’ within a system and can leverage for change across a wide range of the system – are identified and engaged with as early as possible. Key agents of change can only be correctly identified, however, if the project leaders and known participants have clearly identified the boundary to their system as this enables the system, sub-system and environment of the system to be understood. Through mapping the system a range of key organisations and stakeholders will be identified, including government and nongovernment organisations, teacher education students, teacher education academics, and so on. On this basis, key agents of change within the system and sub-system can be identified and invited to assist in working for change. A final insight is that it is important to have time – and if necessary the funding to ‘buy time’ – in seeking to bring about system-wide change. Seeking to bring about system-wide change is an ambitious project, one that requires a great deal of effort and time. These insights provide some considerations for those seeking to utilise the Mainstreaming Sustainability model to bring about change within and across a pre-service teacher education system.

Entrepreneurship and family firms : growth and survival

Family businesses dominate in a majority of economies (Astrachan and Shanker, 2003; Chrisman, Chua, and Sharma, 2005; Morck and Yeung, 2004). As entrepreneurial activities have been shown to be central to economic growth it is essential that family businesses, irrespective of ownership patterns, not only survive but also grow thus growing the economy overall. While a great deal is known about entrepreneurial activities and a body of knowledge is being developed in relation to entrepreneurial processes in family firms, more needs to be understood in relation to the dynamics of entrepreneurial activities at the individual family firm level. One area of particular interest is the dynamics within the business and the family and how these dynamics impact upon entrepreneurial activities. Specifically how relationships between and among family members engaged in the business can interact with professional non-family member senior executives. The senior executives can actively use their positions in such ways that initiatives suggested by family members are less successful than they might be. This paper addresses how ‘family’ aspects of a business can assist or impede the entrepreneurial activities of individuals. It takes into account some of the unique features of family businesses – such as the importance of ‘familiness’ as a competitive advantage; the direct links between ownership and control of a business and the recognition (often implicit) that individuals in families do make a difference to how the business functions (Habbershon and Williams, 1999, Sharma, 2004; and Tokarczyk, Hansen Green, and Down, 2007). This emphasis on individuals in families fits well with the idea of entrepreneur as individual, as expressed by Schumpeter (1934), Baumol et al (2007). The theoretical approach that adopted to explore the dynamics of processes occurring within family firms is structuration theory combined with a theory of embeddeness (Dacin, Ventresca and Beal, 1999; Giddens, 1979, 1984, Jack and Anderson, 2002; and Sarason, Dean and Dillard, 2006).

Assessment by interview and portfolio in a Graduate School Program

Assessment plays an integral role in teaching and learning in Higher Education and teachers have a strong interest in debates and commentaries on assessment as and for learning. In a one-year graduate entry teacher preparation program, the temptation is to emphasize assessment in an attempt to ensure students “cover” everything as part of a robust preparation for the profession. The risk is that, for students, assessment drives curriculum, and time spent in the completion of assignments is no guarantee of either effective learning or authentic preparation for teaching. Interviews as assessment provide an opportunity for a learning experience as well as an authentic task, since students will shortly be interviewing for employment in a “real world” situation. This paper reports on a project experimenting with interview panels as authentic assessment with pre-service early childhood teachers. At the end of their first semester of study, students enrolled in the Graduate Diploma of Education program at the Queensland University of Technology in Australia were required to participate in a panel interview where they were graded by a panel made up of three faculty staff and one undergraduate student enrolled in the four-year Bachelor of Education program. Students and panel members completed a questionnaire on their experience after the interview. Results indicated that both students and staff valued the experience and felt it was authentic. Results are discussed in terms of how the assessment interview and portfolio presentation supports graduating students in their preparation for employment interviews, and how this authentic assessment task has benefits for both students and teaching staff.

A sustainable model for university-industry learning partnership : Issues for universities

Using work integrated learning (WIL) in university-industry learning partnerships as a means of developing the deeper and more complex skills of managers is receiving growing interest in the literature. This paper suggests that there are currently, two basic approaches to WIL – the traditional model and the customisation model. While each has strengths, each also has limitations. Responding the call of Patrick et al (2008) for more discussion and research on WIL stratagems, this paper proposes a third model – the sustainable learning partnership – as an option to encourage deeper, more complex and more long-term capacity building in management development.

Biotribological assessment for artificial synovial joints : the role of boundary lubrication

Biotribology, the study of lubrication, wear and friction within the body, has become a topic of high importance in recent times as we continue to encounter debilitating diseases and trauma that destroy function of the joints. A highly successful surgical procedure to replace the joint with an artificial equivalent alleviates dysfunction and pain. However, the wear of the bearing surfaces in prosthetic joints is a significant clinical problem and more patients are surviving longer than the life expectancy of the joint replacement. Revision surgery is associated with increased morbidity and mortality and has a far less successful outcome than primary joint replacement. As such, it is essential to ensure that everything possible is done to limit the rate of revision surgery. Past experience indicates that the survival rate of the implant will be influenced by many parameters, of primary importance, the material properties of the implant, the composition of the synovial fluid and the method of lubrication. In prosthetic joints, effective boundary lubrication is known to take place. The interaction of the boundary lubricant and the bearing material is of utmost importance. The identity of the vital active ingredient within synovial fluid (SF) to which we owe the near frictionless performance of our articulating joints has been the quest of researchers for many years. Once identified, tribo tests can determine what materials and more importantly what surfaces this fraction of SF can function most optimally with. Surface-Active Phospholipids (SAPL) have been implicated as the body’s natural load bearing lubricant. Studies in this thesis are the first to fully characterise the adsorbed SAPL detected on the surface of retrieved prostheses and the first to verify the presence of SAPL on knee prostheses. Rinsings from the bearing surfaces of both hip and knee prostheses removed from revision operations were analysed using High Performance Liquid Chromatography (HPLC) to determine the presence and profile of SAPL. Several common prosthetic materials along with a novel biomaterial were investigated to determine their tribological interaction with various SAPLs. A pin-on-flat tribometer was used to make comparative friction measurements between the various tribo-pairs. A novel material, Pyrolytic Carbon (PyC) was screened as a potential candidate as a load bearing prosthetic material. Friction measurements were also performed on explanted prostheses. SAPL was detected on all retrieved implant bearing surfaces. As a result of the study eight different species of phosphatidylcholines were identified. The relative concentrations of each species were also determined indicating that the unsaturated species are dominant. Initial tribo tests employed a saturated phosphatidylcholine (SPC) and the subsequent tests adopted the addition of the newly identified major constituents of SAPL, unsaturated phosphatidylcholine (USPC), as the test lubricant. All tribo tests showed a dramatic reduction in friction when synthetic SAPL was used as the lubricant under boundary lubrication conditions. Some tribopairs showed more of an affinity to SAPL than others. PyC performed superior to the other prosthetic materials. Friction measurements with explanted prostheses verified the presence and performance of SAPL. SAPL, in particular phosphatidylcholine, plays an essential role in the lubrication of prosthetic joints. Of particular interest was the ability of SAPLs to reduce friction and ultimately wear of the bearing materials. The identification and knowledge of the lubricating constituents of SF is invaluable for not only the future development of artificial joints but also in developing effective cures for several disease processes where lubrication may play a role. The tribological interaction of the various tribo-pairs and SAPL is extremely favourable in the context of reducing friction at the bearing interface. PyC is highly recommended as a future candidate material for use in load bearing prosthetic joints considering its impressive tribological performance.

Theoretical and numerical investigation of plasmon nanofocusing in metallic tapered rods and grooves

Effective focusing of electromagnetic (EM) energy to nanoscale regions is one of the major challenges in nano-photonics and plasmonics. The strong localization of the optical energy into regions much smaller than allowed by the diffraction limit, also called nanofocusing, offers promising applications in nano-sensor technology, nanofabrication, near-field optics or spectroscopy. One of the most promising solutions to the problem of efficient nanofocusing is related to surface plasmon propagation in metallic structures. Metallic tapered rods, commonly used as probes in near field microscopy and spectroscopy, are of a particular interest. They can provide very strong EM field enhancement at the tip due to surface plasmons (SP’s) propagating towards the tip of the tapered metal rod. A large number of studies have been devoted to the manufacturing process of tapered rods or tapered fibers coated by a metal film. On the other hand, structures such as metallic V-grooves or metal wedges can also provide strong electric field enhancements but manufacturing of these structures is still a challenge. It has been shown, however, that the attainable electric field enhancement at the apex in the V-groove is higher than at the tip of a metal tapered rod when the dissipation level in the metal is strong. Metallic V-grooves also have very promising characteristics as plasmonic waveguides. This thesis will present a thorough theoretical and numerical investigation of nanofocusing during plasmon propagation along a metal tapered rod and into a metallic V-groove. Optimal structural parameters including optimal taper angle, taper length and shape of the taper are determined in order to achieve maximum field enhancement factors at the tip of the nanofocusing structure. An analytical investigation of plasmon nanofocusing by metal tapered rods is carried out by means of the geometric optics approximation (GOA), which is also called adiabatic nanofocusing. However, GOA is applicable only for analysing tapered structures with small taper angles and without considering a terminating tip structure in order to neglect reflections. Rigorous numerical methods are employed for analysing non-adiabatic nanofocusing, by tapered rod and V-grooves with larger taper angles and with a rounded tip. These structures cannot be studied by analytical methods due to the presence of reflected waves from the taper section, the tip and also from (artificial) computational boundaries. A new method is introduced to combine the advantages of GOA and rigorous numerical methods in order to reduce significantly the use of computational resources and yet achieve accurate results for the analysis of large tapered structures, within reasonable calculation time. Detailed comparison between GOA and rigorous numerical methods will be carried out in order to find the critical taper angle of the tapered structures at which GOA is still applicable. It will be demonstrated that optimal taper angles, at which maximum field enhancements occur, coincide with the critical angles, at which GOA is still applicable. It will be shown that the applicability of GOA can be substantially expanded to include structures which could be analysed previously by numerical methods only. The influence of the rounded tip, the taper angle and the role of dissipation onto the plasmon field distribution along the tapered rod and near the tip will be analysed analytically and numerically in detail. It will be demonstrated that electric field enhancement factors of up to ~ 2500 within nanoscale regions are predicted. These are sufficient, for instance, to detect single molecules using surface enhanced Raman spectroscopy (SERS) with the tip of a tapered rod, an approach also known as tip enhanced Raman spectroscopy or TERS. The results obtained in this project will be important for applications for which strong local field enhancement factors are crucial for the performance of devices such as near field microscopes or spectroscopy. The optimal design of nanofocusing structures, at which the delivery of electromagnetic energy to the nanometer region is most efficient, will lead to new applications in near field sensors, near field measuring technology, or generation of nanometer sized energy sources. This includes: applications in tip enhanced Raman spectroscopy (TERS); manipulation of nanoparticles and molecules; efficient coupling of optical energy into and out of plasmonic circuits; second harmonic generation in non-linear optics; or delivery of energy to quantum dots, for instance, for quantum computations.

Spatial Science News from QUT, Urban Development, November 2009.

Brief overview of topics/issues of interest end of 2009, including Spatial Science Students undertake Variety of Research Projects; labs and offices on the move again); Congratulations to Surveying Student Project- QSEA awards.

State-of-the-Art Review on Opinion Mining from Online Customers’ Feedback

Dealing with the ever-growing information overload in the Internet, Recommender Systems are widely used online to suggest potential customers item they may like or find useful. Collaborative Filtering is the most popular techniques for Recommender Systems which collects opinions from customers in the form of ratings on items, services or service providers. In addition to the customer rating about a service provider, there is also a good number of online customer feedback information available over the Internet as customer reviews, comments, newsgroups post, discussion forums or blogs which is collectively called user generated contents. This information can be used to generate the public reputation of the service providers’. To do this, data mining techniques, specially recently emerged opinion mining could be a useful tool. In this paper we present a state of the art review of Opinion Mining from online customer feedback. We critically evaluate the existing work and expose cutting edge area of interest in opinion mining. We also classify the approaches taken by different researchers into several categories and sub-categories. Each of those steps is analyzed with their strength and limitations in this paper.