Aggregating energy supply and demand

Energy usage in general, and electricity usage in particular, are major concerns internationally due to the increased cost of providing energy supplies and the environmental impacts of electricity generation using carbon-based fuels. If a "systems" approach is taken to understanding energy issues then both supply and demand need to be considered holistically. This paper examines two research projects in the energy area with IT tools as key deliverables, one examining supply issues and the other studying demand side issues. The supply side project used hard engineering methods to build the models and software, while the demand side project used a social science approach. While the projects are distinct, there was an overlap in personnel. Comparing the knowledge extraction, model building, implementation and interface issues of these two deliverables identifies both interesting contrasts and commonalities.

Do dissonants in transit oriented development adjust commuting travel behaviour?

Residential dissonance signifies a mismatch between an individual’s preferred and actual proximal land use patterns in residential neighbourhoods, whereas residential consonance signifies agreement between actual and preferred proximal land uses. Residential dissonance is a relatively unexplored theme in the literature, yet it acts as a barrier to the development of sustainable transport and land use policy. This research identifies mode choice behaviour of four groups living in transit oriented development (TOD) and non-TOD areas in Brisbane, Australia using panel data from 2675 commuters: TOD consonants, TOD dissonants, non-TOD consonants, and non-TOD dissonants. The research investigates a hypothetical understanding that dissonants adjust their travel attitudes and perceptions according to their surrounding land uses over time. The adjustment process was examined by comparing the commuting mode choice behaviour of dissonants between 2009 and 2011. Six binary logistic regression models were estimated, one for each of the three modes considered (e.g. public transport, active transport, and car) and one for each of the 2009 and 2011 waves. Results indicate that TOD dissonants and non-TOD consonants were less likely to use the public transport and active transport; and more likely to use the car compared with TOD consonants. Non-TOD dissonants use public transport and active transport equally to TOD consonants. The results suggest that commuting mode choice behaviour is largely determined by travel attitudes than built environment factors; however, the latter influence public transport and car use propensity. This research also supports the view that dissonants adjust their attitudes to surrounding land uses, but very slowly. Both place (e.g. TOD development) and people-based (e.g. motivational) policies are needed for an effective travel behavioural shift.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This paper investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This presentation investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Exploring association between perceived importance of travel/traffic information and travel behaviour in natural disasters : a case study of the 2011 Brisbane floods

A sound understanding of travellers’ behavioural changes and adaptation when facing a natural disaster is a key factor in efficiently and effectively managing transport networks at such times. This study specifically investigates the importance of travel/traffic information and its impact on travel behaviour during natural disasters. Using the 2011 Brisbane flood as a case study, survey respondents’ perceptions of the importance of travel/traffic information before, during, and after the flood were modelled using random-effects ordered logit. A hysteresis phenomenon was observed: respondents’ perceptions of the importance of travel/traffic information increased during the flood, and although its perceived importance decreased after the flood, it did not return to the pre-flood level. Results also reveal that socio-demographic features (such as gender and age) have a significant impact on respondents’ perceptions of the importance of travel/traffic information. The roles of travel time and safety in a respondent’s trip planning are also significantly correlated to their perception of the importance of this information. The analysis further shows that during the flood, respondents generally thought that travel/traffic information was important, and adjusted their travel plans according to information received. When controlling for other factors, the estimated odds of changing routes and cancelling trips for a respondent who thought that travel/traffic information was important, are respectively about three times and seven times the estimated odds for a respondent who thought that travel/traffic information was not important. In contrast, after the flood, the influence of travel/traffic information on respondents’ travel behaviour diminishes. Finally, the analysis shows no evidence of the influence of travel/traffic information’s on respondents’ travel mode; this indicates that inducing travel mode change is a challenging task.

Growing demand for emergency department services : associated factors and perspective of patients

This thesis demonstrates how patients' perceived urgency affects their decision to use public hospital emergency departments. The findings inform public health policy solutions aimed at reducing rapid growth in emergency department utilisation which results in congestion and affects the safety, satisfaction, and the quality of care. This research identified that patients attending emergency departments did so based on the perception of their own health status and beliefs that emergency departments were the most suitable location for their care. Blaming patients as "frequent flyers" or "inappropriate users" ignores the complex and multi-factorial nature of the genuine need for urgent medical care felt by patients.

On the relevance of travel journalism : An introduction

Not many people will be instantly familiar with British woman Dale Sheppard-Floyd, but – at least symbolically – she represents a significant milestone in the development of travel and tourism. In fact, the milestone was so significant that the United Nations World Tourism Organization booked Madrid’s venerable Museo del Prado to announce to the world’s media her visit to Spain on 13 December 2012. For Ms Sheppard-Floyd’s arrival for a three-day trip meant that more than one billion times in that year, someone had crossed a border as a tourist. An astounding number, considering that, in 1950, there had been only 25 million tourist arrivals worldwide, and even only two decades previously – in 1990 – the number had been less than half at 435 million arrivals (World Tourism Organization, 2012a, 2012b). While people have traveled for pleasure for millennia (Towner, 1995), tourism really came into its own with the expansion of the middle classes in the 19th and 20th century, and today it is considered the world’s largest business sector, with unprecedented numbers of people venturing outside of their immediate environments to explore the world around them. In 2012, travel and tourism’s total contribution to the world economy amounted to a staggering $6.6 trillion, or 9 per cent of GDP (World Travel & Tourism Council, 2013). More than 260 million jobs were generated by it worldwide, which equates to one in every 11 jobs across the globe. While there were some hiccups during the Global Financial Crisis, growth in 2012 was stronger than in other industries, such as manufacturing, financial services and retail (World Travel & Tourism Council, 2013)...

A modified Density-Based Scanning Algorithm with Noise for spatial travel pattern analysis from Smart Card AFC data

Smart Card Automated Fare Collection (AFC) data has been extensively exploited to understand passenger behavior, passenger segment, trip purpose and improve transit planning through spatial travel pattern analysis. The literature has been evolving from simple to more sophisticated methods such as from aggregated to individual travel pattern analysis, and from stop-to-stop to flexible stop aggregation. However, the issue of high computing complexity has limited these methods in practical applications. This paper proposes a new algorithm named Weighted Stop Density Based Scanning Algorithm with Noise (WS-DBSCAN) based on the classical Density Based Scanning Algorithm with Noise (DBSCAN) algorithm to detect and update the daily changes in travel pattern. WS-DBSCAN converts the classical quadratic computation complexity DBSCAN to a problem of sub-quadratic complexity. The numerical experiment using the real AFC data in South East Queensland, Australia shows that the algorithm costs only 0.45% in computation time compared to the classical DBSCAN, but provides the same clustering results.

Bikeshare's impact on active travel: Evidence from the United States, Great Britain, and Australia

Over 800 cities globally now offer bikeshare programs. One of their purported benefits is increased physical activity. Implicit in this claim is that bikeshare replaces sedentary modes of transport, particularly car use. This paper estimates the median changes in physical activity levels as a result of bikeshare in the cities of Melbourne, Brisbane, Washington, D.C., London, and Minneapolis/St. Paul. This study is the first known multi-city evaluation of the active travel impacts of bikeshare programs. To perform the analysis, data on mode substitution (i.e. the modes that bikeshare replaces) were used to determine the extent of shift from sedentary to active transport modes (e.g. when a car trip is replaced by bikeshare). Potentially offsetting these gains, reductions in physical activity when walking trips are replaced by bikeshare was also estimated. Finally a Markov Chain Monte Carlo analysis was conducted to estimate confidence bounds on estimated impacts on active travel given uncertainties in data sources. The results indicate that on average 60% of bikeshare trips replace sedentary modes of transport (from 42% in Minneapolis/St. Paul to 67% in Brisbane). When bikeshare replaces a walking trip, there is a reduction in active travel time because walking a given distance takes longer than cycling. Considering the active travel balance sheet for the cities included in this analysis, bikeshare activity in 2012 has an overall positive impact on active travel time. This impact ranges from an additional 1.4 million minutes of active travel for the Minneapolis/St. Paul bikeshare program, to just over 74 million minutes of active travel for the London program The analytical approach adopted to estimate bikeshare’s impact on active travel may act as the basis for future bikeshare evaluations or feasibility studies.