Biological monitoring in workers in a nitrobenzene reduction plant : Haemoglobin versus serum albumin adducts

The high priority of monitoring workers exposed to nitrobenzene is a consequence of clear findings of experimental carcinogenicity of nitrobenzene and the associated evaluations by the International Agency for Research on Cancer. Eighty male employees of a nitrobenzene reduction plant, with potential skin contact with nitrobenzene and aniline, participated in a current medical surveillance programme. Blood samples were routinely taken and analysed for aniline, 4-aminodiphenyl (4-ADP) and benzidine adducts of haemoglobin (Hb) and human serum albumin (HSA). Also, levels of methaemoglobin (Met-Hb) and of carbon monoxide haemoglobin (CO-Hb) were monitored. Effects of smoking were straightforward. Using the rank sum test of Wilcoxon, we found that very clear-cut and statistically significant smoking effects (about 3-fold increases) were apparent on CO-Hb (P = 0.00085) and on the Hb adduct of 4-ADP (P = 0.0006). The mean aniline-Hb adduct level in smokers was 1.5 times higher than in non-smokers; the significance (P = 0.05375) was close to the 5% level. The strongest correlation was evident between the Hb and HSA adducts of aniline (rs = 0.846). Less pronounced correlations (but with P values < 0.02) appeared between aniline-Hb and 4-ADP-Hb adducts (rs = 0.388), between 4-ADP and 4-ADP-HSA adducts (rs = 0.373), and between 4-ADP-Hb and aniline-HSA adducts (rs = 0.275). In view of the proposal for additional use of the aniline-HSA adduct for biological monitoring, particularly in cases of acute overexposures or poisonings, the strong correlation of the Hb and HSA conjugates is noteworthy; the ratio aniline-HSA:aniline-Hb was 1:42 for the entire cohort.

Changes in outdoor workers' sun-related attitudes, beliefs, and behaviors : a pre-post workplace intervention

OBJECTIVE To evaluate changes in outdoor workers' sun-related attitudes, beliefs, and behaviors in response to a health promotion intervention using a participatory action research process. METHODS Fourteen workplaces across four outdoor industry types worked collaboratively with the project team to develop tailored sun protection action plans. Workers were assessed before and after the 18-month intervention. RESULTS Outdoor workers reported increases in workplace support for sun protection (P < 0.01) and personal use of sun protection (P < 0.01). More workers reported seeking natural shade (+20%) and wearing more personal protective equipment, including broad-brimmed hats (+25%), long-sleeved collared shirts (+19%), and long trousers (+16%). The proportion of workers reporting sunburn over the past 12 months was lower at postintervention (-14%) (P = 0.03); however, the intensity of reported sunburn increased. CONCLUSIONS This intervention was successful in increasing workers' sun protective attitudes, beliefs, and behaviors.

Sex workers can be screened too often : a cost-effectiveness analysis in Victoria, Australia

Objectives Commercial sex is licensed in Victoria, Australia such that sex workers are required to have regular tests for sexually transmitted infections (STIs). However, the incidence and prevalence of STIs in sex workers are very low, especially since there is almost universal condom use at work. We aimed to conduct a cost-effectiveness analysis of the financial cost of the testing policy versus the health benefits of averting the transmission of HIV, syphilis, chlamydia and gonorrhoea to clients. Methods We developed a simple mathematical transmission model, informed by conservative parameter estimates from all available data, linked to a cost-effectiveness analysis. Results We estimated that under current testing rates, it costs over $A90 000 in screening costs for every chlamydia infection averted (and $A600 000 in screening costs for each quality-adjusted life year (QALY) saved) and over $A4 000 000 for every HIV infection averted ($A10 000 000 in screening costs for each QALY saved). At an assumed willingness to pay of $A50 000 per QALY gained, HIV testing should not be conducted less than approximately every 40 weeks and chlamydia testing approximately once per year; in comparison, current requirements are testing every 12 weeks for HIV and every 4 weeks for chlamydia. Conclusions Mandatory screening of female sex workers at current testing frequencies is not cost-effective for the prevention of disease in their male clients. The current testing rate required of sex workers in Victoria is excessive. Screening intervals for sex workers should be based on local STI epidemiology and not locked by legislation.

Design, manufacturing and maintenance of sugar milling equipment : observations from the 2008 ISSCT Engineering Workshop

An International Society of Sugar Cane Technologists (ISSCT) Engineering Workshop was held in Piracicaba, Brazil from 30 June to 4 July 2008. The theme of the workshop was Design, manufacturing and maintenance of sugar mill equipment. The workshop consisted of a series of technical sessions and site visits. The Brazilian sugar industry is growing rapidly. The growth has occurred as the result of the sugar industry’s position as a key provider of renewable energy in the form of ethanol and, more recently, electricity. The increased focus on electricity is seeing investment in high pressure (100 bar) boilers, cane cleaning plants that allow an increased biomass supply from trash and digesters that produce biogas from dunder. It is clear that the Brazilian sugar industry has a well defined place in the country’s future. The ISSCT workshop provided a good opportunity to gain information from equipment suppliers and discuss new technology that may have application in Australia. The new technologies of interest included IMCO sintered carbide shredder hammer tips, Fives Cail MillMax mills, planetary mill gearboxes, Bosch Projects chainless diffusers, Fives Cail Zuka centrifugals and Vaperma Siftek membrane systems.

Design, manufacturing and maintenance of sugar mill equipment

The ISSCT Engineering Workshop 2008 in Brazil was well attended with 62 participants including 39 overseas visitors from 15 countries. The workshop addressed the theme Design, manufacturing and maintenance of sugar mill equipment. From the technical sessions, the following conclusions were drawn: • Several speakers articulated a shared vision of the future of the Brazilian sugar industry. This shared vision gives considerable confidence that the vision can become a reality. • There is an increased focus on energy products. As a result, the reduction of factory energy consumption in order to maximise the energy available for products is also a focus. • New equipment and products are being developed with reduced power consumption, lower capital and maintenance costs, and better performance. • Methods presented for reducing maintenance costs included the use of a maintenance management system, condition monitoring and material selection. The workshop was held in conjunction with Piracicaba’s annual SIMTEC exhibition for the sugar and alcohol industries that provides a forum for technical presentations and discussion, and showcases products and services from manufacturers and service providers. In return for holding the workshop in conjunction with SIMTEC, SIMTEC provided sponsorship for the workshop, including paying travel and accommodation costs for two invited speakers, and organisation for the workshop. The ISSCT and SIMTEC technical programs were arranged so that their technical sessions did not clash, and the ISSCT program was extended a day to provide an opportunity for ISSCT participants to attend the SIMTEC exhibition. Informal feedback from workshop participants suggested that the arrangement between ISSCT and SIMTEC worked well. Site visits to two manufacturing facilities and two sugar mills were arranged as part of the workshop.

The legal concept of work-related injury and disease in Australian OHS and workers' compensation systems

This paper analyses the concept of ‘work-relatedness’ in Australian workers’ compensation and occupational health and safety (OHS) systems. The concept of work-relatedness is important because it is a crucial element circumscribing the limits of the protection afforded to workers under the preventative OHS statutes, and is a threshold element which has to be satisfied before an injured or ill worker can recover statutory compensation. While the preventive and compensatory regimes do draw on some similar concepts of work-relatedness, as this paper will illustrate, there are significant differences both between, and within, these regimes.

The OHS regulatory challenges posed by agency workers: evidence from Australia

The purpose of this research is to analyse the problems for occupational health and safety (OHS)regulators posed by agency work/leased labour (also known as labour hire in Australasia), using Australian evidence. The analysis is based on an examination of prosecutions involving labour hire firms along with other documentary records (union, industry and government reports and guidance material). The study also draws on interviews with approximately 200 regulatory officials, employers and union representatives since 2001 and workplace visits with 40 OHS inspectors in 2004‐2005.The triangular relationship entailed in labour leasing, in combination with the temporary nature of most placements, poses serious problems for government agencies in terms of enforcing OHS standards notwithstanding a growing number of successful prosecutions for breaches of legislative duties by host and labour leasing firms. Research to investigate these issues in other countries and compare findings with those for Australia is required, along with assessing the effectiveness of new enforcement initiatives. The paper assesses existing regulatory responses and highlights the need for new regulatory strategies to combat the problems posed by labour. The OHS problems posed by agency work have received comparatively little attention. The paper provides insights into the specific problems posed for OHS regulators and how inspectorates are trying to address them.

Regulating supply-chains to address the occupational health and safety problems associated with precarious employment: The case of home-based clothing workers in Australia

Over the past 20 years the labour market, workforce and work organisation of most if not all industrialised countries have been significantly refashioned by the increased use of more flexible work arrangements, variously labelled as precarious employment or contingent work. There is now a substantial and growing body of international evidence that many of these arrangements are associated with a significant deterioration in occupational health and safety (OHS), using a range of measures such as injury rates, disease, hazard exposures and work-related stress. Moreover, there is an emerging body of evidence that these arrangements pose particular problems for conventional regulatory regimes. Recognition of these problems has aroused the concern of policy makers - especially in Europe, North America and Australia - and a number of responses have been adopted in terms of modifying legislation, producing new guidance material and codes of practice and revised enforcement practices. This article describes one such in itiative in Australia with regard to home-based clothing workers. The regulatory strategy developed in one Australian jurisdiction (and now being ‘exported’ into others) seeks to counter this process via contractual tracking mechanisms to follow the work, tie in liability and shift overarching legal responsibility to the top of the supply chain. The process also entails the integration of minimum standards relating to wages, hours and working conditions; OHS and access to workers’ compensation. While home-based clothing manufacture represents a very old type of ‘flexible’ work arrangement, it is one that regulators have found especially difficult to address. Further, the elaborate multi-tiered subcont racting and diffuse work locations found in this industry are also characteristic of newer forms of contingent work in other industries (such as some telework) and the regulatory challenges they pose (such as the tendency of elaborate supply chains to attenuate and fracture statutory responsibilities, at least in terms of the attitudes and behaviour of those involved).

Supply chain regulation to protect the occupational health and safety of vulnerable workers

The last two decades have witnessed a fragmentation of previously integrated systems of production and service delivery with the advent of boundary-less, networked and porous organisational forms. This trend has been associated with the growth of outsourcing and increased use of contingent workers. One consequence of these changes is the development of production/service delivery systems based on complex national and international networks of multi-tiered subcontracting increasingly labelled as supply chains. A growing body of research indicates that subcontracting and contingent work arrangements affect design and decision-making processes in ways that can seriously undermine occupational health and safety (OHS). Elaborate supply chains also present a regulatory challenge because legal responsibility for OHS is diffused amongst a wider array of parties, targeting key decision-makers is more difficult, and government agencies encounter greater logistical difficulties trying to safeguard contingent workers. In a number of industries these problems have prompted new forms of regulatory intervention, including mechanisms for sheeting legal responsibility to the top of supply chains, contractual tracking devices and increasing industry, union and community involvement in enforcement. After describing the problems just alluded to this paper examines recent efforts to regulate supply chains to safeguard OHS in the United Kingdom and Australia.

Configuring retroreflective markings to enhance the night-time conspicuity of road workers

This study investigated whether the night-time conspicuity of road workers can be enhanced by positioning retroreflective strips on the moveable joints in patterns that convey varying degrees of biological motion. Participants were 24 visually normal adults (12 young M = 26.8 years; 12 older M = 72.9 years). Visual acuity, contrast sensitivity and glare sensitivity were recorded for each participant. Experimenters acting as road workers walked in place on a closed road circuit within simulated road work sites, facing either the oncoming driver or the roadway (presenting sideways to the driver) and wearing one of four clothing conditions: (i) standard road worker vest; (ii) standard vest plus thigh-mounted retroreflective strips; (iii) standard vest plus retroreflective strips on ankles and knees; (iv) standard vest plus retroreflective strips positioned on the extremities in a configuration that conveyed biological motion (“biomotion”). As they drove along the closed road participants were instructed to press a button to indicate when they first recognized that a road worker was present. The results demonstrated that regardless of the direction of walking, road workers wearing biomotion clothing were recognized at significantly (p < 0.05) longer distances (3×), relative to the standard vest alone. Response distances were significantly shorter for the older drivers. Contrast sensitivity was a better predictor of the ability to recognize road workers than was visual acuity or glare sensitivity. We conclude that adding retroreflective strips in the biomotion configuration can significantly improve road worker conspicuity regardless of the road worker's orientation and the age of the driver.

Recruiting, Sampling and Data Collection with Difficult Populations: Clients of Male Sex Workers.

Although there are many potential new insights to be gained through advancing research on the clients of male sex workers, significant social, ethical and methodological challenges to accessing this population exist. This research project case explores our attempts to recruit a population that does not typically form a cohesive or coherent 'community' and often avoids self-identifying to mitigate the stigma attached to buying sex. We used an arms-length recruitment campaign that focussed on directing potential participants to our study website, which could in turn lead them to participate in an anonymous telephone interview. Barriers to reaching male sex-work clients, however, demanded the evolution of our recruitment strategy. New technologies are part of the solution to accessing a hard-to-reach population, but they only work if researchers engage responsively. We also show how we conducted an in-depth interview with a client and discuss the value of using secondary data.

An investigation into the effect of infrastructure on fly-in fly-out mining workers

Objective: To explore fly-in fly-out (FIFO) mining workers' attitudes towards the leisure time they spend in mining camps, the recreational and social aspects of mining camp culture, the camps' communal and recreational infrastructure and activities, and implications for health. Design: In-depth semistructured interviews. Setting: Individual interviews at locations convenient for each participant. Participants: A total of seven participants, one female and six males. The age group varied within 20–59 years. Marital status varied across participants. Main outcome measures: A qualitative approach was used to interview participants, with responses thematically analysed. Findings highlight how the recreational infrastructure and activities at mining camps impact participants' enjoyment of the camps and their feelings of community and social inclusion. Results: Three main areas of need were identified in the interviews, as follows: (i) on-site facilities and activities; (ii) the role of infrastructure in facilitating a sense of community; and (iii) barriers to social interaction. Conclusion: Recreational infrastructure and activities enhance the experience of FIFO workers at mining camps. The availability of quality recreational facilities helps promote social interaction, provides for greater social inclusion and improves the experience of mining camps for their temporary FIFO residents. The infrastructure also needs to allow for privacy and individual recreational activities, which participants identified as important emotional needs. Developing appropriate recreational infrastructure at mining camps would enhance social interactions among FIFO workers, improve their well-being and foster a sense of community. Introducing infrastructure to promote social and recreational activities could also reduce alcohol-related social exclusion.

Workers' attitude towards bus rapid transit : considering Dhaka, Bangladesh

The Government of Bangladesh is planning to develop and implement Bus Rapid Transit (BRT) in Dhaka city. This paper presents a stated choice survey conducted to understand workers’ attitudes toward BRT in Dhaka. The survey data are analysed using a multinomial logit (MNL) model to scrutinize social and economic factors’ impact on participant’s mode choices. Analysis results reveal that males, and workers with higher age, education qualification, and income have greater tendency towards choosing BRT.

Workers' attitude towards bus rapid transit in Dhaka, Bangladesh

This study investigates: –how travel and socio-demographic attributes act on workers’ mode choice decisions in Dhaka –whether Dhaka’s commuters would choose BRT for their work trip once implemented •Very limited research exists on users’ perceptions of BRT in developing countries’ megacities •We adopted a discrete choice modelling approach •As BRT has not yet been implemented in Dhaka, we collected Stated Choice (SC) survey data including a hypothetical BRT mode to understand factors important to workers’ mode choice decisions •We compare the impact of travel factors between Dhaka and cities of developed countries