In search of the antecendents for risky driving at railway level crossings

This paper discusses human factors issues of low cost railway level crossings in Australia. Several issues are discussed in this paper including safety at passive level railway crossings, human factors considerations associated with unavailability of a warning device, and a conceptual model for how safety could be compromised at railway level crossings following prolonged or frequent unavailability. The research plans to quantify safety risk to motorists at level crossings using a Human Reliability Assessment (HRA) method, supported by data collected using an advanced driving simulator. This method aims to identify human error within tasks and task units identified as part of the task analysis process. It is anticipated that by modelling driver behaviour the current study will be able to quantify meaningful task variability including temporal parameters, between participants and within participants. The process of complex tasks such as driving through a level crossing is fundamentally context-bound. Therefore this study also aims to quantify those performance-shaping factors that contribute to vehicle train collisions by highlighting changes in the task units and driver physiology. Finally we will also consider a number of variables germane to ensuring external validity of our results. Without this inclusion, such an analysis could seriously underestimate the probabilistic risk assessment.

A human factors investigation into the unavailability of active warnings at railway level crossings

This paper discusses human factors issues of low cost railway level crossings in Australia. Several issues are discussed in this paper including safety at passive level railway crossings, human factors considerations associated with unavailability of a warning device, and a conceptual model for how safety could be compromised at railway level crossings following prolonged or frequent unavailability. The research plans to quantify safety risk to motorists at level crossings using a Human Reliability Assessment (HRA) method, supported by data collected using an advanced driving simulator. This method aims to identify human error within tasks and task units identified as part of the task analysis process. It is anticipated that by modelling driver behaviour the current study will be able to quantify meaningful task variability including temporal parameters, between participants and within participants. The process of complex tasks such as driving through a level crossing is fundamentally context-bound. Therefore this study also aims to quantify those performance-shaping factors that contribute to vehicle train collisions by highlighting changes in the task units and driver physiology. Finally we will also consider a number of variables germane to ensuring external validity of our results. Without this inclusion, such an analysis could seriously underestimate risk.

Charting the system : the integrated master schedule as a multi-level and poly-temporal boundary object in complex projects

This paper investigates the use of visual artifacts to represent a complex adaptive system (CAS). The integrated master schedule (IMS) is one of those visuals widely used in complex projects for scheduling, budgeting, and project management. In this paper, we discuss how the IMS outperforms the traditional timelines and acts as a ‘multi-level and poly-temporal boundary object’ that visually represents the CAS. We report the findings of a case study project on the way the IMS mapped interactions, interdependencies, constraints and fractal patterns in a complex project. Finally, we discuss how the IMS was utilised as a complex boundary object by eliciting commitment and development of shared mental models, and facilitating negotiation through the layers of multiple interpretations from stakeholders.

A multi-level model of leadership in complex project management

Management (or perceived mismanagement) of large-scale, complex projects poses special problems and often results in spectacular failures, cost overruns, time blowouts and stakeholder dissatisfaction. While traditional project management responds with increasingly administrative constraints, we argue that leaders of such projects also need to display adaptive and enabling behaviours to foster adaptive processes, such as opportunity recognition, which requires an interaction of cognitive and affective processes of individual, project, and team leader attributes and behaviours. At the core of this model we propose is an interaction of cognitive flexibility, affect and emotional intelligence. The result of this interaction is enhanced leader opportunity recognition that, in turn, facilitates multilevel outcomes.

Determination of stress-strain characteristics of railhead steel using image analysis

True stress-strain curve of railhead steel is required to investigate the behaviour of railhead under wheel loading through elasto-plastic Finite Element (FE) analysis. To reduce the rate of wear, the railhead material is hardened through annealing and quenching. The Australian standard rail sections are not fully hardened and hence suffer from non-uniform distribution of the material property; usage of average properties in the FE modelling can potentially induce error in the predicted plastic strains. Coupons obtained at varying depths of the railhead were, therefore, tested under axial tension and the strains were measured using strain gauges as well as an image analysis technique, known as the Particle Image Velocimetry (PIV). The head hardened steel exhibit existence of three distinct zones of yield strength; the yield strength as the ratio of the average yield strength provided in the standard (σyr=780MPa) and the corresponding depth as the ratio of the head hardened zone along the axis of symmetry are as follows: (1.17 σyr, 20%), (1.06 σyr, 20%- 80%) and (0.71 σyr, > 80%). The stress-strain curves exhibit limited plastic zone with fracture occurring at strain less than 0.1.

How do level of experience, purpose for riding, and preference for facilities affect location of riding?

Characteristics of the road infrastructure affect both the popularity of bicycling and its safety, but comparisons of the safety performance of infrastructure may be confounded by differences in the profiles of cyclists who use them. Data from a survey of 2,532 adult bicycle riders in Queensland, Australia, demonstrated that many riders rode reluctantly in particular locations and that preference for riding location was influenced by degree of experience and riding purpose. Most riders rode most often and furthest per week on urban roads, but approximately one-third of all riders (and more new riders) rode there reluctantly. Almost two-thirds of riders rode on bicycle paths, most by choice, not reluctantly. New riders rode proportionally more on bicycle paths, but continuing riders rode further in absolute terms. Utilitarian riders were more likely to ride on bicycle paths than social and fitness riders and almost all of this riding was by choice. Fitness riders were more reluctant in their use of bicycle paths, but still most of their use was by choice. One-third of the respondents reported riding on the sidewalk (legal in Queensland), with approximately two-thirds doing so reluctantly. The frequency and distance ridden on the sidewalk was less than for urban roads and bicycle paths. Sidewalks and bicycle paths were important facilities for both inexperienced and experienced riders and for utilitarian riding, especially when urban roads were considered a poor choice for cycling.

The application of Bowen’s family system theory (BFST) to the Malay population in Malaysia

The rapid economic development and social changes in Malaysia recently have led to many psychosocial problems in young people, such as drug addiction, child sexual abuse and mental illness. The Malaysian government is beginning to focus more attention on its social welfare and human service needs in order to alleviate these psychosocial problems. Although counselling is accepted and widespread in Malaysia, the practice of family therapy is not as accepted as it is still a widely held belief that family problems need to be kept within the family. However, changes are imminent and thus the theoretical basis of family therapy needs to be culturally relevant. Bowen‟s Family Systems Theory (BFST) is already one of the major theories taught to tertiary counselling students in Malaysian universities. The main tenet of Bowen‟s theory is that the family as a system may be unstable unless each member of the family is well differentiated. High differentiation levels in the family allow a person to both leave the family‟s boundaries in search of uniqueness and to continually return to the family fold in order to establish a more mature sense of belonging. The difficulty, however, is that while Bowen has claimed that his theory is universal nearly all of the research confirming the theory has been conducted in the United States of America. The only known study outside America, however, did show that Bowen‟s theory applied to a Filipino population but, one of the theory‟s propositions that differentiation is intergenerational was not supported in this non-American sample. The American sample that was compared to the Malay sample was taken from Skowron and Friedlander‟s (1998) study. One hundred and twenty-seven faculty staff in an American university completed the Differentiation of Self Inventory (DSI) to measure level of differentiation of self. This thesis therefore, set out to determine whether Bowen‟s theory applied to another non-American sample, the Malaysian community. The research also investigated if the intergenerational effect was present in the Malaysian sample as well as explored the role of socio-economic status on Bowen‟s theory of differentiation and gender effect. Three hundred and seventy-four families completed four measures to examine these research questions: the Differentiation of Self Inventory (DSI), the Family Inventory of Life Event (FILE), the Depression Anxiety and Stress Scale (DASS) and the Connor-Davidson Resilience Scale (CD-RISC). The results of the study showed that differentiation of self is a valid construct for the Malay population. However, all four subscales of the Differentiation of Self Inventory (DSI); emotional reactivity (ER), emotional cut-off (EC), fusion with other (FO) and I position (IP), showed significant differences compared to the American sample from Skowron and Friedlander‟s (1998) study. The Malay sample scored higher in emotional reaction (ER), fusion with other (FO), but lower on emotional cut-off (EC) and I position (IP) than the American sample. The intergenerational effect was found in the Malay population as the parent‟s level of differentiation correlated with their children‟s level of differentiation. It was found that stress as measured by the Family Inventory of Life Event (FILE) and as measured by the Depression Anxiety and Stress Scale (DASS) were not correlated with the level of differentiation of self in parents. However, gender had a significant effect in predicting the level of differentiation among parents in Malay population with females scores higher on emotional reactivity (ER) and fusion with other (FO) than males. An additional finding was that resilience can be predicted from the level of differentiation of self in children in the Malay sample. There was also a positive correlation between the level of differentiation of self in parents and resilience in their children. Findings from this study indicate that the concept of differentiation of self is applicable to a Malay sample; however, the implementation of the theory should be applied with cultural sensitivity.

Educational stress scale for adolescents : development, validity, and reliability with Chinese students

This article describes the development and initial validation of a new instrument to measure academic stress—the Educational Stress Scale for Adolescents (ESSA). A series of cross-sectional questionnaire surveys were conducted with more than 2,000 Chinese adolescents to examine the psychometric properties. The final 16-item ESSA contains five latent variables: Pressure from study, Workload, Worry about grades, Self-expectation, and Despondency, which together explain 64% of the total item variance. Scale scores showed adequate internal consistency, 2-week test–retest reliability, and satisfactory concurrent validity. A confirmatory factor analysis suggested the proposed factor model fits well in a different sample. For researchers who have a particular interest in academic stress among adolescents, the ESSA promises to be a useful tool.

The development of a conceptual framework for a district 4-Year Pavement Management Plan, implementation of network-level project screening process

The Texas Department of Transportation (TxDOT) is concerned about the widening gap between preservation needs and available funding. Funding levels are not adequate to meet the preservation needs of the roadway network; therefore projects listed in the 4-Year Pavement Management Plan must be ranked to determine which projects should be funded now and which can be postponed until a later year. Currently, each district uses locally developed methods to prioritize projects. These ranking methods have relied on less formal qualitative assessments based on engineers’ subjective judgment. It is important for TxDOT to have a 4-Year Pavement Management Plan that uses a transparent, rational project ranking process. The objective of this study is to develop a conceptual framework that describes the development of the 4-Year Pavement Management Plan. It can be largely divided into three Steps; 1) Network-Level project screening process, 2) Project-Level project ranking process, and 3) Economic Analysis. A rational pavement management procedure and a project ranking method accepted by districts and the TxDOT administration will maximize efficiency in budget allocations and will potentially help improve pavement condition. As a part of the implementation of the 4-Year Pavement Management Plan, the Network-Level Project Screening (NLPS) tool including the candidate project identification algorithm and the preliminary project ranking matrix was developed. The NLPS has been used by the Austin District Pavement Engineer (DPE) to evaluate PMIS (Pavement Management Information System) data and to prepare a preliminary list of candidate projects for further evaluation.

Childbirth and the development of acute trauma symptoms : incidence and contributing factors

Background: Little is known about the relationship between women's birthing experiences and the development of trauma symptoms. This study aimed to determine the incidence of acute trauma symptoms and posttraumatic stress disorder in women as a result of their labor and birth experiences, and to identify factors that contributed to the women's psychological distress. Method: Using a prospective, longitudinal design, women in their last trimester of pregnancy were recruited from four public hospital antenatal clinics. Telephone interviews with 499 participants were conducted at 4 to 6 weeks postpartum to explore the medical and midwifery management of the birth, perceptions of intrapartum care, and the presence of trauma symptoms. Results: One in three women (33%) identified a traumatic birthing event and reported the presence of at least three trauma symptoms. Twenty-eight women (5.6%) met DSM-IV criteria for acute posttraumatic stress disorder. Antenatal variables did not contribute to the development of acute or chronic trauma symptoms. The level of obstetric intervention experienced during childbirth (β= 0.351, p < 0.0001)and the perception of inadequate intrapartum care (β= 0.319, p < 0.0001) during labor were consistently associated with the development of acute trauma symptoms. Conclusions: Posttraumatic stress disorder after childbirth is a poorly recognized phenomenon. Women who experienced both a high level of obstetric intervention and dissatisfaction with their intrapartum care were more likely to develop trauma symptoms than women who received a high level of obstetric intervention or women who perceived their care to be inadequate. These findings should prompt a serious review of intrusive obstetric intervention during labor and delivery, and the care provided to birthing women.

Investigating pre-service teachers’ perceptions of their preparedness to teach

The experiences of transition to the teaching profession have a significant impact on a teachers’ potential length of career, feelings of professional efficacy and the quality of performance in the classroom (Gore & Thomas, 2003). While the transition to practice is characterized by much expectation and excitement, it also a time of stress and uncertainty for many beginning teachers. As such, it is important to investigate this period of transition for beginning teachers. This paper explores graduate teachers perceptions of their personal ‘preparedness to teach’. The group is graduating from one Australian university, and the data is captured at the end of their teacher preparation programs,before they take up positions in schools. These graduating pre-service teachers are from one year graduate entry programs that include individual programs of early years, middle years and senior years. The key findings indicate that this group of graduating pre-service teachers are already engaged in some level of reflective practice and are actively seeking further professional learning to improve the practical aspects of their classroom teaching.

A study on the use of acoustic emission technique as a structural health monitoring tool

As civil infrastructures such as bridges age, there is a concern for safety and a need for cost-effective and reliable monitoring tool. Different diagnostic techniques are available nowadays for structural health monitoring (SHM) of bridges. Acoustic emission is one such technique with potential of predicting failure. The phenomenon of rapid release of energy within a material by crack initiation or growth in form of stress waves is known as acoustic emission (AE). AEtechnique involves recording the stress waves bymeans of sensors and subsequent analysis of the recorded signals,which then convey information about the nature of the source. AE can be used as a local SHM technique to monitor specific regions with visible presence of cracks or crack prone areas such as welded regions and joints with bolted connection or as a global technique to monitor the whole structure. Strength of AE technique lies in its ability to detect active crack activity, thus helping in prioritising maintenance work by helping focus on active cracks rather than dormant cracks. In spite of being a promising tool, some challenges do still exist behind the successful application of AE technique. One is the generation of large amount of data during the testing; hence an effective data analysis and management is necessary, especially for long term monitoring uses. Complications also arise as a number of spurious sources can giveAEsignals, therefore, different source discrimination strategies are necessary to identify genuine signals from spurious ones. Another major challenge is the quantification of damage level by appropriate analysis of data. Intensity analysis using severity and historic indices as well as b-value analysis are some important methods and will be discussed and applied for analysis of laboratory experimental data in this paper.

Lateral torsional buckling behaviour of cold-formed steel beams at elevated temperatures

Abstract: This paper presents the details of a study into the behaviour and moment capacities of cold-formed steel lipped channel beams (LCB) subject to lateral-torsional buckling at elevated temperatures. It was based on a validated numerical model of a simply supported and laterally unrestrained LCB subjected to a uniform moment. The ultimate moment capacities from this study were compared with the predicted values using ambient and fire design methods. This study showed that the lateral torsional buckling capacity is strongly influenced by the level of non-linearity in the stress-strain curves of steel at elevated temperatures. Hence most of the current design methods based on a single buckling curve were not adequate to determine the moment capacities. This paper proposes a new design method for the cold-formed steel LCBs subject lateral-torsional buckling at elevated temperatures.

Communities Under Stress: Understanding and Managing Growth in Resource–Based Regions–The case of the Western Downs, Queensland

The Western Downs region, located in Southern Queensland, about 200 kilometres west of Brisbane, has been experiencing rapid and significant changes over the past years, due to a massive boom in the energy sector. The rapid growth triggered by the development of mining and energy sectors has generated environmental, socio-economic and land use issues, and has revealed strong weaknesses within the region’s current governance arrangements. The present paper develops a four-stage approach to managing current and expected changes in a resource-based region under tremendous stress and uncertainty.