Research roadmap summary - Integrated Design and Delivery Solutions (IDDS)

Changes in the construction sector are creating opportunities in research to maximise the benefits of those changes and to continue the exciting developments in improved people skills, new processes and developing technologies. Many research centres around the world are investigating aspects of the current changes to drive their particular expertise forward. However, the CIB Integrated Design and Delivery Solutions (IDDS) priority research theme takes a higher-level view of the changes and then focuses down on a prioritised set of research targets. These targets have been investigated, re-focussed and validated over a period of four years through many workshops, conferences and meetings by a wide ranging group of representatives from approximately 90 industry and research organisations. The outcomes of such research, once put into practice should be significantly shortened timespans from conception of need to occupation of new or revised structures. As time is money, the owners will get their investments into productive use sooner, which means a shorter payback time. In addition, there will inevitably be a reduction in construction costs as productivity increases. The improvements in reliable delivery and improved quality currently being seen in relatively simplistic use of Building information Modelling (BIM) (compared to full IDDS) will inevitably continue its on-going trajectory of improvement. We should also consider the wider economic contribution to society that will stem from such improvements and, finally, and by no means unimportantly, the reliable modelling and delivery of sustainability at both the building and estate/ area scale will significantly improve carbon footprints and other sustainable outcomes. Whilst there are huge opportunities for early adopters, the primary risk will be the expansion of the gap between those working in this way and those who are not so advanced or who even refuse to progress . The opportunities to address the significant and widely varying wastes within the structure of the construction sector and within and across projects are huge and timely and industry is encouraged to become involved.

Research roadmap report : Integrated Design and Delivery Solutions (IDDS)

Changes in the construction sector are creating opportunities in research to maximise the benefits of those changes and to continue the exciting developments in improved people skills, new processes and developing technologies. There are many research centres around the world investigating aspects of the current changes to drive their particular expertise forward. However, the CIB Integrated Design and Delivery Solutions (IDDS) priority research theme takes a higher-level view of the changes and then focuses down on a prioritised set of research targets. These targets have been investigated, re-focussed and validated over a period of four years through many workshops, conferences and meetings by a wide ranging group of representatives from approximately 90 industry and research organisations. This roadmap prioritises and details the research to be performed, why and by whom. In particular, some 25 CIB Working Commissions and Task Groups are explained as having potential roles in the delivery of this research theme. We are extremely privileged to have been urged on by such distinguished construction professionals in their forewords and the case for research. The outcomes of such research, once put into practice should be significantly shortened timespans from conception of need to occupation of new or revised structures. As time is money, the owners will get their investments into productive use sooner, which means a shorter payback time. In addition, there will inevitably be a reduction in construction costs as productivity increases. The improvements in reliable delivery and improved quality currently being seen in relatively simplistic use of Building information Modelling (BIM) (compared to full IDDS) will inevitably continue its on-going trajectory of improvement. We should also consider the wider economic contribution to society that will stem from such improvements and, finally, and by no means unimportantly, the reliable modelling and delivery of sustainability at both the building and estate/ area scale will significantly improve carbon footprints and other sustainable outcomes. Whilst there are huge opportunities for early adopters, the primary risk will be the expansion of the gap between those working in this way and those who are not so advanced or who even refuse to progress1. However, a similar issue arises between industry, clients, educators and trainers; the latter have particular challenges, having existed for many years in a sector that has had relatively few technological changes. However, the opportunities to address the significant and widely varying wastes within the structure of the construction sector and within and across projects are huge and timely. Whilst this Roadmap is specifically targeted at the Standing Commissions and Task Groups of the CIB, it is hoped that there are elements for research and applied research across academia and industry.

An assessment of the geographical scale of recurrent gene flow in wild populations of two species of Mekong River carps (Henicorhynchus spp.)

The Mekong is the most productive river fishery in the world, and such as, the Mekong River Basin (MRB) is very important to very large human populations across the region as a source of revenue (through fishing and marketing of aquatic resources products) and as the major source for local animal protein. Threats to biodiversity in the MRB, either to the fishery sector itself or to other sectors are a major concern, even though currently, fisheries across this region are still very productive. If not managed properly however, fish population declines will cause significant economic impact and affect livelihoods of local people and will have a major impact on food security and nutrition. Biodiversity declines will undoubtedly affect food security, income and socio-economic status of people in the MRB that depend on aquatic resources. This is an indicator of unsustainable development and hence should be avoided. Genetic diversity (biodiversity) that can be measured using techniques based on DNA markers; refers to variation within and among populations within the same species or reproductive units. In a population, new genetic variation is generated by sexual recombination contributed by individuals with mutations in genes and chromosomes. Over time, populations of a species that are not reproducing together will diverge as differential impacts of selection and genetic drift change their genetic attributes. For mud carp (Henicorhynchus spp.), understanding the status of breeding units in the MRB will be important for their long term persistence, sustainability and for implementing effective management strategies. Earlier analysis of stock structure in two economically important mud carp species (Henicorhynchus siamensis and H. lobatus) in the MRB completed with mtDNA markers identified a number of populations of both species where gene flow had apparently been interrupted or reduced but applying these data directly to management unit identification is potentially compromised because information was only available about female dispersal patterns. The current study aimed to address this problem and to fully assess the extent of current gene flow (nDNA) and reproductive exchange among selected wild populations of two species of carp (Henicorhynchus spp.) of high economic importance in the MRB using combined mtDNA and nDNA markers. In combination, the data can be used to define effective management units for each species. In general, nDNA diversity for H. lobatus (with average allelic richness (A) 7.56 and average heterozygosity (Ho) 0.61) was very similar to that identified for H. siamensis (A = 6.81 and Ho = 0.75). Both mud carp species show significant but low FST estimates among populations as a result of lower genetic diversity among sampled populations compared with genetic diversity within populations that may potentially mask any 'real' population structure. Overall, population genetic structure patterns from mtDNA and nDNA in both Henicorhynchus species were largely congruent. Different population structures however, were identified for the two Henicorhynchus species across the same geographical area. Apparent co-similarity in morphology and co-distribution of these two relatively closely related species does not apparently imply parallel evolutionary histories. Differences in each species population structure likely reflect historical drainage rearrangement of the Mekong River. The data indicate that H. siamensis is likely to have occupied the Mekong system for much longer than has H. lobatus in the past. Two divergent stocks were identified for H. lobatus in the MRB below the Khone Falls while a single stock had been evident in the earlier mtDNA study. This suggests that the two Henicorhynchus species may possess different life history traits and that different patterns of gene flow has likely influenced modern genetic structure in these close congeners. In combination, results of the earlier mtDNA and the current study have implications for effective management of both Henicorhynchus species across the MRB. Currently, both species are essentially treated as a single management unit in this region. This strategy may be appropriate for H. lobatus as a single stock was evident in the main stream of the MRB, but may not be appropriate for H. siamensis as more than a single stock was identified across the same range for this species. Management strategies should consider this difference to conserve overall biodiversity (local discrete populations) and this will include maintaining natural habitat and migration pathways, provision of fish sanctuaries (refuges) and may also require close monitoring of any stock declines, a signal that may require effective recovery strategies.

STEM education for sustainable development : a sociotechnical analysis

It is debated that for sustainable STEM education and knowledge investment, human centered learning design approach is critical and important. Sustainability in this context is enduring maintenance of technological trajectories for productive economical and social interactions by demonstrating life critical scenarios through life critical system development and life experiences. Technology influences way of life and the learning and teaching process. Social software application development is more than learning of how to program a software application and extracting information from the Internet. Hence, our research challenge is, how do we attract learners to STEM social software application development? Our realisation processes begin with comparing Science and Technology education in developed (e.g., Australia) and developing (e.g., Sri Lanka) countries with distinction on final year undergraduates’ industry ready training programmes. Principal components analysis was performed to separate patterns of important factors. To measure behavioural intention of perceived usefulness and attitudes of the training, the measurement model was analysed to test its validity and reliability using partial least square (PLS) analysis of structural equation modelling (SEM). Our observation is that the relationship is more complex than we argue for. Our initial conclusions were that life critical system development and life experience trajectories as determinant factors while technological influences were unavoidable. A further investigation should involve correlations between human centered learning design approach and economical development in the long run.

A transcriptomic analysis of striped catfish (Pangasianodon hypophthalmus) in response to salinity adaptation: De novo assembly, gene annotation and marker discovery

The striped catfish (Pangasianodon hypophthalmus) culture industry in the Mekong Delta in Vietnam has developed rapidly over the past decade. The culture industry now however, faces some significant challenges, especially related to climate change impacts notably from predicted extensive saltwater intrusion into many low topographical coastal provinces across the Mekong Delta. This problem highlights a need for development of culture stocks that can tolerate more saline culture environments as a response to expansion of saline water-intruded land. While a traditional artificial selection program can potentially address this need, understanding the genomic basis of salinity tolerance can assist development of more productive culture lines. The current study applied a transcriptomic approach using Ion PGM technology to generate expressed sequence tag (EST) resources from the intestine and swim bladder from striped catfish reared at a salinity level of 9 ppt which showed best growth performance. Total sequence data generated was 467.8 Mbp, consisting of 4,116,424 reads with an average length of 112 bp. De novo assembly was employed that generated 51,188 contigs, and allowed identification of 16,116 putative genes based on the GenBank non-redundant database. GO annotation, KEGG pathway mapping, and functional annotation of the EST sequences recovered with a wide diversity of biological functions and processes. In addition, more than 11,600 simple sequence repeats were also detected. This is the first comprehensive analysis of a striped catfish transcriptome, and provides a valuable genomic resource for future selective breeding programs and functional or evolutionary studies of genes that influence salinity tolerance in this important culture species.

Herbivores and nutrients control grassland plant diversity via light limitation

Human alterations to nutrient cycles1, 2 and herbivore communities3, 4, 5, 6, 7 are affecting global biodiversity dramatically2. Ecological theory predicts these changes should be strongly counteractive: nutrient addition drives plant species loss through intensified competition for light, whereas herbivores prevent competitive exclusion by increasing ground-level light, particularly in productive systems8, 9. Here we use experimental data spanning a globally relevant range of conditions to test the hypothesis that herbaceous plant species losses caused by eutrophication may be offset by increased light availability due to herbivory. This experiment, replicated in 40 grasslands on 6 continents, demonstrates that nutrients and herbivores can serve as counteracting forces to control local plant diversity through light limitation, independent of site productivity, soil nitrogen, herbivore type and climate. Nutrient addition consistently reduced local diversity through light limitation, and herbivory rescued diversity at sites where it alleviated light limitation. Thus, species loss from anthropogenic eutrophication can be ameliorated in grasslands where herbivory increases ground-level light.

Key facilitators and barriers to quality of life in residential aged care : the role of design

Australia is undergoing a critical demographic transition: the population is ageing. By 2050, one in four Australians will be older than 65 years and by 2031, the number of older Australians requiring residential aged care will increase 63%, to 1.4 million (ABS, 2005). In anticipation of this global demographic transition, the World Health Organisation has advocated ‘active ageing’, identifying health, participation and security as the three key factors that enhance quality of life for people as they age (WHO, 2002). While there is considerable discussion and acceptance of active ageing principles, little is known about the experience of ‘active ageing’ for older Australians who live in Residential Aged Care Facilities (RACF). This research addresses this knowledge gap by exploring the key facilitators and barriers to quality of life and active ageing in aged care from the perspective of aged care residents (n=12). To do this, the project documented the initial expectations and daily life experience of new residents living in a RACF over a one-year period. Combined with in-depth interviews and surveys, the project utilised Photovoice methodology - where participants used photography to record their lived experiences. The initial findings suggest satisfaction with living in aged care centers around five key themes; resident’s mental attitude to living in aged care, forming positive peer and staff relationships, self-determination and maintaining independence, opportunities to participate in interesting activities, and living in a safe and comfortable physical environment. This paper reports on the last of these five key themes, focusing on the role of design in facilitating quality of life, specifically: “living within these walls” – safety, comfort and the physical environment.

Management of a high grade pan stage schedule to reduce the steam consumption

MOST PAN stages in Australian factories use only five or six batch pans for the high grade massecuite production and operate these in a fairly rigid repeating production schedule. It is common that some of the pans are of large dropping capacity e.g. 150 to 240 t. Because of the relatively small number and large sizes of the pans, steam consumption varies widely through the schedule, often by ±30% about the mean value. Large fluctuations in steam consumption have implications for the steam generation/condensate management of the factory and the evaporators when bleed vapour is used. One of the objectives of a project to develop a supervisory control system for a pan stage is to (a) reduce the average steam consumption and (b) reduce the variation in the steam consumption. The operation of each of the high grade pans within the schedule at Macknade Mill was analysed to determine the idle (or buffer) time, time allocations for essential but unproductive operations (e.g. pan turn round, charging, slow ramping up of steam rates on pan start etc.), and productive time i.e. the time during boil-on of liquor and molasses feed. Empirical models were developed for each high grade pan on the stage to define the interdependence of the production rate and the evaporation rate for the different phases of each pan’s cycle. The data were analysed in a spreadsheet model to try to reduce and smooth the total steam consumption. This paper reports on the methodology developed in the model and the results of the investigations for the pan stage at Macknade Mill. It was found that the operation of the schedule severely restricted the ability to reduce the average steam consumption and smooth the steam flows. While longer cycle times provide increased flexibility the steam consumption profile was changed only slightly. The ability to cut massecuite on the run among pans, or the use of a high grade seed vessel, would assist in reducing the average steam consumption and the magnitude of the variations in steam flow.

A review of the potential role of greenhouse gas abatement in native vegetation management in Queensland's rangelands

Concern about the risk of harmful human-induced climate change has resulted in international efforts to reduce greenhouse gas emissions to the atmosphere. We review the international and national context for consideration of greenhouse abatement in native vegetation management and discuss potential options in Queensland. Queensland has large areas of productive or potentially productive land with native woody vegetation cover with approximately 76 million ha with woody cover remaining in 1991. High rates of tree clearing, predominantly to increase pasture productivity, continued throughout the 1990s with an average 345,000 ha/a estimated to have been cleared, including non-remnant (woody regrowth) as well as remnant vegetation. Estimates of greenhouse gas emissions associated with land clearing currently have a high uncertainty but clearing was reported to contribute a significant proportion of Australia's total greenhouse gas emissions from 1990 (21%) to 1999 (13%). In Queensland, greenhouse emissions from land clearing were estimated to have been 54.5 Mt CO(2)-e in 1999. Management of native vegetation for timber harvesting and the proliferation of woody vegetation (vegetation thickening) in the grazed woodlands also represent large carbon fluxes. Forestry (plantations and native forests) in Queensland was reported to be a 4.4 Mt CO(2)-e sink in 1999 but there are a lack of comprehensive data on timber harvesting in private hardwood forests. Vegetation thickening is reported for large areas of the c. 60 million ha grazed woodlands in Queensland. The magnitude of the carbon sink in 27 million ha grazed eucalypt woodlands has been estimated to be 66 Mt CO(2)-e/a but this sink is not currently included in Australia's inventory of anthropogenic greenhouse emissions. Improved understanding of the function and dynamics of natural and managed ecosystems is required to support management of native vegetation to preserve and enhance carbon stocks for greenhouse benefits while meeting objectives of sustainable and productive management and biodiversity protection.

Decomposition analysis of air pollution abatement in China: empirical study for ten industrial sectors from 1998 to 2009

This study analyzes the management of air pollutant substance in Chinese industrial sectors from 1998 to 2009. Decomposition analysis applying the logarithmic mean divisia index is used to analyze changes in emissions of air pollutants with a focus on the following five factors: coal pollution intensity (CPI), end-of-pipe treatment (EOP), the energy mix (EM), productive efficiency change (EFF), and production scale changes (PSC). Three pollutants are the main focus of this study: sulfur dioxide (SO2), dust, and soot. The novelty of this paper is focusing on the impact of the elimination policy on air pollution management in China by type of industry using the scale merit effect for pollution abatement technology change. First, the increase in SO2 emissions from Chinese industrial sectors because of the increase in the production scale is demonstrated. However, the EOP equipment that induced this change and improvements in energy efficiency has prevented an increase in SO2 emissions that is commensurate with the increase in production. Second, soot emissions were successfully reduced and controlled in all industries except the steel industry between 1998 and 2009, even though the production scale expanded for these industries. This reduction was achieved through improvements in EOP technology and in energy efficiency. Dust emissions decreased by nearly 65% between 1998 and 2009 in the Chinese industrial sectors. This successful reduction in emissions was achieved by implementing EOP technology and pollution prevention activities during the production processes, especially in the cement industry. Finally, pollution prevention in the cement industry is shown to result from production technology development rather than scale merit. © 2013 Elsevier Ltd. All rights reserved.

Determinants of eco-efficiency in the Chinese industrial sector

This study measures productive inefficiency within the context of multi-environmental pollution (eco-efficiency) in the Chinese industrial sector. The weighted Russell directional distance model is applied to measure eco-efficiency using production technology. The objective is to clarify how external factors affect eco-efficiency. The major findings are that both foreign direct investment and investment for pollution abatement improve eco-efficiency as measured by air pollutant substances. A levy system for wastewater discharge improves eco-efficiency as measured by wastewater pollutant substances. However, an air pollutant levy does not significantly affect eco-efficiency as measured by air pollutants.

The game of clones and the Australia tax : divergent views about copyright business models and the willingness of Australian consumers to infringe

It is often said that Australia is a world leader in rates of copyright infringement for entertainment goods. In 2012, the hit television show, Game of Thrones, was the most downloaded television show over bitorrent, and estimates suggest that Australians accounted for a plurality of nearly 10% of the 3-4 million downloads each week. The season finale of 2013 was downloaded over a million times within 24 hours of its release, and again Australians were the largest block of illicit downloaders over BitTorrent, despite our relatively small population. This trend has led the former US Ambassador to Australia to implore Australians to stop 'stealing' digital content, and rightsholders to push for increasing sanctions on copyright infringers. The Australian Government is looking to respond by requiring Internet Service Providers to issue warnings and potentially punish consumers who are alleged by industry groups to have infringed copyright. This is the logical next step in deterring infringement, given that the operators of infringing networks (like The Pirate Bay, for example) are out of regulatory reach. This steady ratcheting up of the strength of copyright, however, comes at a significant cost to user privacy and autonomy, and while the decentralisation of enforcement reduces costs, it also reduces the due process safeguards provided by the judicial process. This article presents qualitative evidence that substantiates a common intuition: one of the major reasons that Australians seek out illicit downloads of content like Game of Thrones in such numbers is that it is more difficult to access legitimately in Australia. The geographically segmented way in which copyright is exploited at an international level has given rise to a ‘tyranny of digital distance’, where Australians have less access to copyright goods than consumers in other countries. Compared to consumers in the US and the EU, Australians pay more for digital goods, have less choice in distribution channels, are exposed to substantial delays in access, and are sometimes denied access completely. In this article we focus our analysis on premium film and television offerings, like Game of Thrones, and through semi-structured interviews, explore how choices in distribution impact on the willingness of Australian consumers to seek out infringing copies of copyright material. Game of Thrones provides an excellent case study through which to frame this analysis: it is both one of the least legally accessible television offerings and one of the most downloaded through filesharing networks of recent times. Our analysis shows that at the same time as rightsholder groups, particularly in the film and television industries, are lobbying for stronger laws to counter illicit distribution, the business practices of their member organisations are counter-productively increasing incentives for consumers to infringe. The lack of accessibility and high prices of copyright goods in Australia leads to substantial economic waste. The unmet consumer demand means that Australian consumers are harmed by lower access to information and entertainment goods than consumers in other jurisdictions. The higher rates of infringement that fulfils some of this unmet demand increases enforcement costs for copyright owners and imposes burdens either on our judicial system or on private entities – like ISPs – who may be tasked with enforcing the rights of third parties. Most worryingly, the lack of convenient and cheap legitimate digital distribution channels risks undermining public support for copyright law. Our research shows that consumers blame rightsholders for failing to meet market demand, and this encourages a social norm that infringing copyright, while illegal, is not morally wrongful. The implications are as simple as they are profound: Australia should not take steps to increase the strength of copyright law at this time. The interests of the public and those of rightsholders align better when there is effective competition in distribution channels and consumers can legitimately get access to content. While foreign rightsholders are seeking enhanced protection for their interests, increasing enforcement is likely to increase their ability to engage in lucrative geographical price-discrimination, particularly for premium content. This is only likely to increase the degree to which Australian consumers feel that their interests are not being met and, consequently, to further undermine the legitimacy of copyright law. If consumers are to respect copyright law, increasing sanctions for infringement without enhancing access and competition in legitimate distribution channels could be dangerously counter-productive. We suggest that rightsholders’ best strategy for addressing infringement in Australia at this time is to ensure that Australians can access copyright goods in a timely, affordable, convenient, and fair lawful manner.

“To educate you to be smart”: disaffected students and the purpose of school in the (not so clever) “lucky country”

This paper contributes to conversations about school, post-compulsory and further education policy by reporting findings from a three-year study with disaffected students who have been referred to special “behaviour” schools. Contrary to popular opinion, our research finds that these “ignorant yobs” (Tomlinson, 2012) do value education and know what it is for. They also have aspirations for a secure, productive and fulfilled life, although it may not involve university level study. Importantly, we found that students who responded negatively with regard to the importance of schooling tended to envision future lives and occupations for which they believed school knowledge was unnecessary. The implications of this research for school, post-compulsory and further education policy are discussed.

Writing embodied practice from the inside : outside the exegesis

The textual turn is a good friend of expert spectating, where it assumes the role of writing-productive apparatus, but no friend at all of expert practices or practitioners (Melrose, 2003). Introduction The challenge of time-based embodied performance when the artefact is unstable As a former full-time professional practitioner with an embodied dance practice as performer, choreographer and artistic director for three decades, I somewhat unexpectedly entered the world of academia in 2000 after completing a practice-based PhD, which was described by its examiners as ‘pioneering’. Like many artists my intention was to deepen and extend my practice through formal research into my work and its context (which was intercultural) and to privilege the artist’s voice in a research world where it was too often silent. Practice as research, practice-based research, and practice-led research were not yet fully named. It was in its infancy and my biggest challenge was to find a serviceable methodology which did not betray my intentions to keep practice at the centre of the research. Over the last 15 years, practice led doctoral research, where examinable creative work is placed alongside an accompanying (exegetical) written component, has come a long way. It has been extensively debated with a range of theories and models proposed (Barrett & Bolt, 2007, Pakes, 2003 & 2004, Piccini, 2005, Philips, Stock & Vincs 2009, Stock, 2009 & 2010, Riley & Hunter 2009, Haseman, 2006, Hecq, 2012). Much of this writing is based around epistemological concerns where the research methodologies proposed normally incorporate a contextualisation of the creative work in its field of practice, and more importantly validation and interrogation of the processes of the practice as the central ‘data gathering’ method. It is now widely accepted, at least in the Australian creative arts context, that knowledge claims in creative practice research arise from the material activities of the practice itself (Carter, 2004). The creative work explicated as the tangible outcome of that practice is sometimes referred to as the ‘artefact’. Although the making of the artefact, according to Colbert (2009, p. 7) is influenced by “personal, experiential and iterative processes”, mapping them through a research pathway is “difficult to predict [for] “the adjustments made to the artefact in the light of emerging knowledge and insights cannot be foreshadowed”. Linking the process and the practice outcome most often occurs through the textual intervention of an exegesis which builds, and/or builds on, theoretical concerns arising in and from the work. This linking produces what Barrett (2007) refers to as “situated knowledge… that operates in relation to established knowledge” (p. 145). But what if those material forms or ‘artefacts’ are not objects or code or digitised forms, but live within the bodies of artist/researchers where the nature of the practice itself is live, ephemeral and constantly transforming, as in dance and physical performance? Even more unsettling is when the ‘artefact’ is literally embedded and embodied in the work and in the maker/researcher; when subject and object are merged. To complicate matters, the performing arts are necessarily collaborative, relying not only on technical mastery and creative/interpretive processes, but on social and artistic relationships which collectively make up the ‘artefact’. This chapter explores issues surrounding live dance and physical performance when placed in a research setting, specifically the complexities of being required to translate embodied dance findings into textual form. Exploring how embodied knowledge can be shared in a research context for those with no experiential knowledge of communicating through and in dance, I draw on theories of “dance enaction” (Warburton, 2011) together with notions of “affective intensities” and “performance mastery” (Melrose, 2003), “intentional activity” (Pakes, 2004) and the place of memory. In seeking ways to capture in another form the knowledge residing in live dance practice, thus making implicit knowledge explicit, I further propose there is a process of triple translation as the performance (the living ‘artefact’) is documented in multi-facetted ways to produce something durable which can be re-visited. This translation becomes more complex if the embodied knowledge resides in culturally specific practices, formed by world views and processes quite different from accepted norms and conventions (even radical ones) of international doctoral research inquiry. But whatever the combination of cultural, virtual and genre-related dance practices being researched, embodiment is central to the process, outcome and findings, and the question remains of how we will use text and what forms that text might take.

Citizen’s right to the digital city: Urban interfaces, activism, and placemaking

Edited by thought leaders of the fields of urban informatics and urban interaction design, this book brings together case studies and examples from around the world to discuss the role that urban Interfaces, citizen action, and city making play in the quest to create and maintain not only secure and resilient, but productive, sustainable, and liveable urban environments. The book debates the impact of these trends on theory, policy, and practice. The chapters in this book are sourced from blind peer reviewed contributions by leading researchers working at the intersection of the social / cultural, technical / digital, and physical / spatial domains of urbanism scholarship. The book appeals not only to research colleagues and students, but also to a vast number of practitioners in the private and public sector interested in accessible accounts that clearly and rigorously analyse the affordances and possibilities of urban interfaces, mobile technology, and location-based services to engage people towards open, smart and participatory urban environments.