The influence of glass types on the performance of air-conditioned office buildings in Australia

Windows are one of the most significant elements in the design of buildings. Whether there are small punched openings in the facade or a completely glazed curtain wall, windows are usually a dominant feature of the building's exterior appearance. From the energy use perspective, windows may also be regarded as thermal holes for a building. Therefore, window design and selection must take both aesthetics and serviceability into consideration. In this paper, using building computer simulation techniques, the effects of glass types on the thermal and energy performance of a sample air-conditioned office building in Australia are studied. It is found that a glass type with lower shading coefficient will have a lower building cooling load and total energy use. Through the comparison of results between current and future weather scenarios, it is identified that the pattern found from the current weather scenario would also exist in the future weather scenario, although the scale of change would become smaller. The possible implication of glazing selection in face of global warming is also examined. It is found that compared with its influence on building thermal performance, its influence on the building energy use is relatively small or insignificant.

A physico-chemical characterisation of particulate emissions from a compression ignition engine : the influence of biodiesel feedstock

This study undertook a physico-chemical characterisation of particle emissions from a single compression ignition engine operated at one test mode with 3 biodiesel fuels made from 3 different feedstocks (i.e. soy, tallow and canola) at 4 different blend percentages (20%, 40%, 60% and 80%) to gain insights into their particle-related health effects. Particle physical properties were inferred by measuring particle number size distributions both with and without heating within a thermodenuder (TD) and also by measuring particulate matter (PM) emission factors with an aerodynamic diameter less than 10 μm (PM10). The chemical properties of particulates were investigated by measuring particle and vapour phase Polycyclic Aromatic Hydrocarbons (PAHs) and also Reactive Oxygen Species (ROS) concentrations. The particle number size distributions showed strong dependency on feedstock and blend percentage with some fuel types showing increased particle number emissions, whilst others showed particle number reductions. In addition, the median particle diameter decreased as the blend percentage was increased. Particle and vapour phase PAHs were generally reduced with biodiesel, with the results being relatively independent of the blend percentage. The ROS concentrations increased monotonically with biodiesel blend percentage, but did not exhibit strong feedstock variability. Furthermore, the ROS concentrations correlated quite well with the organic volume percentage of particles – a quantity which increased with increasing blend percentage. At higher blend percentages, the particle surface area was significantly reduced, but the particles were internally mixed with a greater organic volume percentage (containing ROS) which has implications for using surface area as a regulatory metric for diesel particulate matter (DPM) emissions.

Country of Origin and Internet Publication : Applying the Berne Convention in the Digital Age

Historically, determining the country of origin of a published work presented few challenges, because works were generally published physically – whether in print or otherwise – in a distinct location or few locations. However, publishing opportunities presented by new technologies mean that we now live in a world of simultaneous publication – works that are first published online are published simultaneously to every country in world in which there is Internet connectivity. While this is certainly advantageous for the dissemination and impact of information and creative works, it creates potential complications under the Berne Convention for the Protection of Literary and Artistic Works (“Berne Convention”), an international intellectual property agreement to which most countries in the world now subscribe. Under the Berne Convention’s national treatment provisions, rights accorded to foreign copyright works may not be subject to any formality, such as registration requirements (although member countries are free to impose formalities in relation to domestic copyright works). In Kernel Records Oy v. Timothy Mosley p/k/a Timbaland, et al. however, the Florida Southern District Court of the United States ruled that first publication of a work on the Internet via an Australian website constituted “simultaneous publication all over the world,” and therefore rendered the work a “United States work” under the definition in section 101 of the U.S. Copyright Act, subjecting the work to registration formality under section 411. This ruling is in sharp contrast with an earlier decision delivered by the Delaware District Court in Håkan Moberg v. 33T LLC, et al. which arrived at an opposite conclusion. The conflicting rulings of the U.S. courts reveal the problems posed by new forms of publishing online and demonstrate a compelling need for further harmonization between the Berne Convention, domestic laws and the practical realities of digital publishing. In this article, we argue that even if a work first published online can be considered to be simultaneously published all over the world it does not follow that any country can assert itself as the “country of origin” of the work for the purpose of imposing domestic copyright formalities. More specifically, we argue that the meaning of “United States work” under the U.S. Copyright Act should be interpreted in line with the presumption against extraterritorial application of domestic law to limit its application to only those works with a real and substantial connection to the United States. There are gaps in the Berne Convention’s articulation of “country of origin” which provide scope for judicial interpretation, at a national level, of the most pragmatic way forward in reconciling the goals of the Berne Convention with the practical requirements of domestic law. We believe that the uncertainties arising under the Berne Convention created by new forms of online publishing can be resolved at a national level by the sensible application of principles of statutory interpretation by the courts. While at the international level we may need a clearer consensus on what amounts to “simultaneous publication” in the digital age, state practice may mean that we do not yet need to explore textual changes to the Berne Convention.

Digital complementary assets

Google, Facebook, Twitter, LinkedIn, etc. are some of the prominent large-scale digital service providers that are having tremendous impact on societies, corporations and individuals. However, despite the rapid uptake and their obvious influence on the behavior of individuals and the business models and networks of organizations, we still lack a deeper, theory-guided understanding of the related phenomenon. We use Teece’s notion of complementary assets and extend it towards ‘digital complementary assets’ (DCA) in an attempt to provide such a theory-guided understanding of these digital services. Building on Teece’s theory, we make three contributions. First, we offer a new conceptualization of digital complementary assets in the form of digital public goods and digital public assets. Second, we differentiate three models for how organizations can engage with such digital complementary assets. Third, user-base is found to be a critical factor when considering appropriability.

Influence of rainfall and catchment characteristics on urban stormwater quality

This thesis presents the outcomes of a comprehensive research study undertaken to investigate the influence of rainfall and catchment characteristics on urban stormwater quality. The knowledge created is expected to contribute to a greater understanding of urban stormwater quality and thereby enhance the design of stormwater quality treatment systems. The research study was undertaken based on selected urban catchments in Gold Coast, Australia. The research methodology included field investigations, laboratory testing, computer modelling and data analysis. Both univariate and multivariate data analysis techniques were used to investigate the influence of rainfall and catchment characteristics on urban stormwater quality. The rainfall characteristics investigated included average rainfall intensity and rainfall duration whilst catchment characteristics included land use, impervious area percentage, urban form and pervious area location. The catchment scale data for the analysis was obtained from four residential catchments, including rainfall-runoff records, drainage network data, stormwater quality data and land use and land cover data. Pollutants build-up samples were collected from twelve road surfaces in residential, commercial and industrial land use areas. The relationships between rainfall characteristics, catchment characteristics and urban stormwater quality were investigated based on residential catchments and then extended to other land uses. Based on the influence rainfall characteristics exert on urban stormwater quality, rainfall events can be classified into three different types, namely, high average intensity-short duration (Type 1), high average intensity-long duration (Type 2) and low average intensity-long duration (Type 3). This provides an innovative approach to conventional modelling which does not commonly relate stormwater quality to rainfall characteristics. Additionally, it was found that the threshold intensity for pollutant wash-off from urban catchments is much less than for rural catchments. High average intensity-short duration rainfall events are cumulatively responsible for the generation of a major fraction of the annual pollutants load compared to the other rainfall event types. Additionally, rainfall events less than 1 year ARI such as 6- month ARI should be considered for treatment design as they generate a significant fraction of the annual runoff volume and by implication a significant fraction of the pollutants load. This implies that stormwater treatment designs based on larger rainfall events would not be feasible in the context of cost-effectiveness, efficiency in treatment performance and possible savings in land area needed. This also suggests that the simulation of long-term continuous rainfall events for stormwater treatment design may not be needed and that event based simulations would be adequate. The investigations into the relationship between catchment characteristics and urban stormwater quality found that other than conventional catchment characteristics such as land use and impervious area percentage, other catchment characteristics such as urban form and pervious area location also play important roles in influencing urban stormwater quality. These outcomes point to the fact that the conventional modelling approach in the design of stormwater quality treatment systems which is commonly based on land use and impervious area percentage would be inadequate. It was also noted that the small uniformly urbanised areas within a larger mixed catchment produce relatively lower variations in stormwater quality and as expected lower runoff volume with the opposite being the case for large mixed use urbanised catchments. Therefore, a decentralised approach to water quality treatment would be more effective rather than an "end-of-pipe" approach. The investigation of pollutants build-up on different land uses showed that pollutant build-up characteristics vary even within the same land use. Therefore, the conventional approach in stormwater quality modelling, which is based solely on land use, may prove to be inappropriate. Industrial land use has relatively higher variability in maximum pollutant build-up, build-up rate and particle size distribution than the other two land uses. However, commercial and residential land uses had relatively higher variations of nutrients and organic carbon build-up. Additionally, it was found that particle size distribution had a relatively higher variability for all three land uses compared to the other build-up parameters. The high variability in particle size distribution for all land uses illustrate the dissimilarities associated with the fine and coarse particle size fractions even within the same land use and hence the variations in stormwater quality in relation to pollutants adsorbing to different sizes of particles.

The influence of architecture on degradation and tissue ingrowth into three-dimensional poly(lactic-co-glycolic acid) scaffolds in vitro and in vivo

The in vitro and in vivo degradation properties of poly(lactic-co-glycolic acid) (PLGA) scaffolds produced by two different technologies - thermally induced phase separation (TIPS), and solvent casting and particulate leaching (SCPL) were compared. Over 6 weeks, in vitro degradation produced changes in SCPL scaffold dimension, mass, internal architecture and mechanical properties. TIPS scaffolds produced far less changes in these parameters providing significant advantages over SCPL. In vivo results were based on a microsurgically created arteriovenous (AV) loop sandwiched between two TIPS scaffolds placed in a polycarbonate chamber under rat groin skin. Histologically, a predominant foreign body giant cell response and reduced vascularity was evident in tissue ingrowth between 2 and 8 weeks in TIPS scaffolds. Tissue death occurred at 8 weeks in the smallest pores. Morphometric comparison of TIPS and SCPL scaffolds indicated slightly better tissue ingrowth but greater loss of scaffold structure in SCPL scaffolds. Although advantageous in vitro, large surface area:volume ratios and varying pore sizes in PLGA TIPS scaffolds mean that effective in vivo (AV loop) utilization will only be achieved if the foreign body response can be significantly reduced so as to allow successful vascularisation, and hence sustained tissue growth, in pores less than 300 μm. © 2005 Elsevier Ltd. All rights reserved.

From cyber to cyborg : The influence of motivation and personality traits on the merging of consumer and technology

As technology extends further into consumer daily lives, consumers develop significant relationships with their technology, particularly mobile devices. This conceptual paper aims to investigate the merging of consumers and their technology, termed the cyborg consumer, which has been previously overlooked in the marketing literature. More specifically, this investigation extends the marketing theories of consumer psychological motivation and ersonality traits in examining the influence of these elements on cyborg consumer behaviour, such as intensive consumption of technology and construction of an important part of the self on the Internet. A conceptual framework of the cyborg consumer is presented, which will help marketers to better understand how consumers’ relationships with technology are changing and how marketing practices can be better targeted to the cyborg consumers.

When non-significance maybe significant: lessons learned from a study into the development, implementation and evaluation of a risk assessment tool for fleet settings

Introduction This study reports on the development of a self report assessment tool to increase the efficacy of crash prediction within Australian Fleet settings Over last 20 years an array of measures have been produced (Driver anger scale, Driving Skill Inventory, Manchester Driver Behaviour Questionnaire, Driver Attitude Questionnaire, Driver Stress Inventory, Safety Climate Questionnaire) While these tools are useful, research has demonstrated limited ability to accurately identify individuals most likely to be involved in a crash. Reasons cited include; - Crashes are relatively rare - Other competing factors may influence crash event - Ongoing questions regarding the validity of self report measures (common method variance etc) - Lack of contemporary issues relating to fleet driving performance

The influence of culture on safety : culture, organisational culture and safety culture

Transport and Storage Sector - Identified as one of 4 primary targets in the National Occupational Health and Safety Strategy 2002-2012 (NOHSS) The Heavy Vehicle Industry -80% of the freight task -29% of the employees in Transport and Storage 5 years on: -Transport and Storage - 22% reduction -Heavy Vehicle Industry - only an 11% reduction Intervention strategies that aren’t targeted to a specific audience may have differing levels of success due to cultural beliefs and values (McLeroy et al., 1994) Research Goal: - To explore the influence of culture on safety in the heavy vehicle industry

Voices of experience : opportunities to influence creatively the designing of school libraries

Using a critical ethnographic approach this study investigates the potential for multiple voices of experience, of educators, designers/architects, education facility planners and students/learners, to influence creatively the designing of school libraries. School libraries are considered as social and cultural entities within the contexts of school life and of wider society. It is proposed that school library designing is a social interaction of concern to those influenced by its practices and outcomes. School library designing is therefore of significance to educators and students as well as to those with professionally accredited involvement in school library designing, such as designers/architects and education facility planners. The study contends that current approaches to educational space designing, including school libraries, amplify the voices of accredited designers and diminish or silence the voices of the user participants. The study is conceptualised as creative processes of discovery, through which attention is paid to the voices of experience of user and designer participants, and is concerned with their understandings and experiences of school libraries and their understandings and experiences of designing. Grounded theory coding (Charmaz) is used for initial categorising of interview data. Critical discourse analysis (CDA, Fairclough) is used as analytical tool for reflection on the literature and for analysis of the small stories gathered through semi-structured interviews, field observations and documents. The critical interpretive stance taken through CDA, enables discussions of aspects of power associated with the understandings and experiences of participants, and for recognition of creative possibilities and creative influence within and beyond current conditions. Through an emphasis on prospects for educators and students as makers of the spaces and places of learning, in particular in school libraries, the study has the potential to inform education facility designing practices and design participant relationships, and to contribute more broadly to knowledge in the fields of education, design, architecture, and education facility planning.

Influence of field size on pupil diameter under photopic and mesopic light levels

Purpose: We investigated the interaction between adapting field size and luminance on pupil diameter when cones alone (photopic) or rods and cones (mesopic) were active. Method: Circular achromatic targets (1o to 24o diameter) were presented to eight young participants on a rectangular projector screen. The accommodative influence on pupil diameter was minimized using cycloplegia in the fixing right eye and the consensual pupil reflex was measured in the left eye. Target luminance was adjusted for each stimulus such that corneal flux density (product of field area and luminance) was constant at 3600 cd.deg2m-2 (photopic condition) and 1.49 cd.deg2m-2 (mesopic condition). Results: There were no statistically significant effects of adaptive field size on pupil diameter for either condition. Conclusion: If corneal flux density is kept constant, there will be no change in pupil diameter as the size of the stimulus field increases at either mesopic or photopic lighting levels up to at least 24°.

Communicating with the coroner : how religion, culture, and family concerns may influence autopsy decision making

Based on coronial data gathered in the state of Queensland in 2004, this article reviews how a change in legislation may have impacted autopsy decision making by coroners. More specifically, the authors evaluated whether the requirement that coronial autopsy orders specify the level of invasiveness of an autopsy to be performed by a pathologist was affected by the further requirement that coroners take into consideration a known religion, culture, and/or raised family concern before making such an order. Preliminary data reveal that the cultural status of the deceased did not affect coronial autopsy decision making. However, a known religion with a proscription against autopsy and a raised family concern appeared to be taken into account by coroners when making autopsy decisions and tended to decrease the invasiveness of the autopsy ordered from a full internal examination to either a partial internal examination or an external-only examination of the body. The impact of these findings is briefly discussed.