A pre-treatment verification tool for IMRT based on EPID measurements and a GEANT4 back projection application

The aim of this work is to develop software that is capable of back projecting primary fluence images obtained from EPID measurements through phantom and patient geometries in order to calculate 3D dose distributions. In the first instance, we aim to develop a tool for pretreatment verification in IMRT. In our approach, a Geant4 application is used to back project primary fluence values from each EPID pixel towards the source. Each beam is considered to be polyenergetic, with a spectrum obtained from Monte Carlo calculations for the LINAC in question. At each step of the ray tracing process, the energy differential fluence is corrected for attenuation and beam divergence. Subsequently, the TERMA is calculated and accumulated to an energy differential 3D TERMA distribution. This distribution is then convolved with monoenergetic point spread kernels, thus generating energy differential 3D dose distributions. The resulting dose distributions are accumulated to yield the total dose distribution, which can then be used for pre-treatment verification of IMRT plans. Preliminary results were obtained for a test EPID image comprised of 100 9 100 pixels of unity fluence. Back projection of this field into a 30 cm9 30 cm 9 30 cm water phantom was performed, with TERMA distributions obtained in approximately 10 min (running on a single core of a 3 GHz processor). Point spread kernels for monoenergetic photons in water were calculated using a separate Geant4 application. Following convolution and summation, the resulting 3D dose distribution produced familiar build-up and penumbral features. In order to validate the dose model we will use EPID images recorded without any attenuating material in the beam for a number of MLC defined square fields. The dose distributions in water will be calculated and compared to TPS predictions.

Embodying multiplicity : the independent dancer's moving identity

In this article, I argue for an acknowledgement of the significance of the dancer’s role in the creation of independent contemporary dance. I propose the term ‘moving identity’ to outline the independent contemporary dancer’s ‘way of moving’ which could be perceived as the accumulation of various factors including training approaches, choreographic movement traces and anatomical structures. The concept of the moving identity allows us to appreciate the dancer’s unique signature movement style as the collation of embodied experiences into a unique way of moving. However, the moving identity is also open to change when the dancer encounters new choreography and the choreographer. Professional dance training produces particular types of dancers, depending on the techniques with which they engage. I demonstrate how the independent contemporary dancer troubles this distinctiveness by engaging with a multitude of movement styles and approaches throughout a career. This leads me to a fresh description of the dancer’s activity through the lens of Deleuzean concepts of multiplicity and de-stratification. Finally, I propose a definition of the dancer as a fluid and mutable body-in-flux with the creative potential to significantly influence the outcome of the choreographic process.

Digital storytelling as everyday activism : Queer identity, voice and networked publics

This thesis investigates the role of personal Digital Stories shared in public spaces as catalysts for social change. By analysing the influence of workshop facilitators, organisations, digital platforms and networked publics on voice and self-representation, it sheds light on shifting meanings of publicness and privacy, both face to face and online. This thesis argues that, despite numerous obstacles, the cumulative influence of diverse voices dispersed among networked publics shape new cultural norms, thereby contributing to gradual social change.

Cryptographic techniques for managing computational effort

Availability has become a primary goal of information security and is as significant as other goals, in particular, confidentiality and integrity. Maintaining availability of essential services on the public Internet is an increasingly difficult task in the presence of sophisticated attackers. Attackers may abuse limited computational resources of a service provider and thus managing computational costs is a key strategy for achieving the goal of availability. In this thesis we focus on cryptographic approaches for managing computational costs, in particular computational effort. We focus on two cryptographic techniques: computational puzzles in cryptographic protocols and secure outsourcing of cryptographic computations. This thesis contributes to the area of cryptographic protocols in the following ways. First we propose the most efficient puzzle scheme based on modular exponentiations which, unlike previous schemes of the same type, involves only a few modular multiplications for solution verification; our scheme is provably secure. We then introduce a new efficient gradual authentication protocol by integrating a puzzle into a specific signature scheme. Our software implementation results for the new authentication protocol show that our approach is more efficient and effective than the traditional RSA signature-based one and improves the DoSresilience of Secure Socket Layer (SSL) protocol, the most widely used security protocol on the Internet. Our next contributions are related to capturing a specific property that enables secure outsourcing of cryptographic tasks in partial-decryption. We formally define the property of (non-trivial) public verifiability for general encryption schemes, key encapsulation mechanisms (KEMs), and hybrid encryption schemes, encompassing public-key, identity-based, and tag-based encryption avors. We show that some generic transformations and concrete constructions enjoy this property and then present a new public-key encryption (PKE) scheme having this property and proof of security under the standard assumptions. Finally, we combine puzzles with PKE schemes for enabling delayed decryption in applications such as e-auctions and e-voting. For this we first introduce the notion of effort-release PKE (ER-PKE), encompassing the well-known timedrelease encryption and encapsulated key escrow techniques. We then present a security model for ER-PKE and a generic construction of ER-PKE complying with our security notion.

Verification of patient position and delivery of IMRT by electronic portal imaging

Background and purpose: The purpose of the work presented in this paper was to determine whether patient positioning and delivery errors could be detected using electronic portal images of intensity modulated radiotherapy (IMRT). Patients and methods: We carried out a series of controlled experiments delivering an IMRT beam to a humanoid phantom using both the dynamic and multiple static field method of delivery. The beams were imaged, the images calibrated to remove the IMRT fluence variation and then compared with calibrated images of the reference beams without any delivery or position errors. The first set of experiments involved translating the position of the phantom both laterally and in a superior/inferior direction a distance of 1, 2, 5 and 10 mm. The phantom was also rotated 1 and 28. For the second set of measurements the phantom position was kept fixed and delivery errors were introduced to the beam. The delivery errors took the form of leaf position and segment intensity errors. Results: The method was able to detect shifts in the phantom position of 1 mm, leaf position errors of 2 mm, and dosimetry errors of 10% on a single segment of a 15 segment IMRT step and shoot delivery (significantly less than 1% of the total dose). Conclusions: The results of this work have shown that the method of imaging the IMRT beam and calibrating the images to remove the intensity modulations could be a useful tool in verifying both the patient position and the delivery of the beam.

Monte Carlo verification of intensity modulated radiotherapy treatments using EPIDS

Purpose: Electronic Portal Imaging Devices (EPIDs) are available with most linear accelerators (Amonuk, 2002), the current technology being amorphous silicon flat panel imagers. EPIDs are currently used routinely in patient positioning before radiotherapy treatments. There has been an increasing interest in using EPID technology tor dosimetric verification of radiotherapy treatments (van Elmpt, 2008). A straightforward technique involves the EPID panel being used to measure the fluence exiting the patient during a treatment which is then compared to a prediction of the fluence based on the treatment plan. However, there are a number of significant limitations which exist in this Method: Resulting in a limited proliferation ot this technique in a clinical environment. In this paper, we aim to present a technique of simulating IMRT fields using Monte Carlo to predict the dose in an EPID which can then be compared to the measured dose in the EPID. Materials: Measurements were made using an iView GT flat panel a-SI EPfD mounted on an Elekta Synergy linear accelerator. The images from the EPID were acquired using the XIS software (Heimann Imaging Systems). Monte Carlo simulations were performed using the BEAMnrc and DOSXVZnrc user codes. The IMRT fieids to be delivered were taken from the treatment planning system in DICOMRT format and converted into BEAMnrc and DOSXYZnrc input files using an in-house application (Crowe, 2009). Additionally. all image processing and analysis was performed using another in-house application written using the Interactive Data Language (IDL) (In Visual Information Systems). Comparison between the measured and Monte Carlo EPID images was performed using a gamma analysis (Low, 1998) incorporating dose and distance to agreement criteria. Results: The fluence maps recorded by the EPID were found to provide good agreement between measured and simulated data. Figure 1 shows an example of measured and simulated IMRT dose images and profiles in the x and y directions. "A technique for the quantitative evaluation of dose distributions", Med Phys, 25(5) May 1998 S. Crowe, 1. Kairn, A. Fielding, "The Development of a Monte Carlo system to verify Radiotherapy treatment dose calculations", Radiotherapy & Oncology, Volume 92, Supplement 1, August 2009, Pages S71-S71.

The development of Monte Carlo techniques for the verification of radiotherapy treatments

Introduction: Recent advances in the planning and delivery of radiotherapy treatments have resulted in improvements in the accuracy and precision with which therapeutic radiation can be administered. As the complexity of the treatments increases it becomes more difficult to predict the dose distribution in the patient accurately. Monte Carlo (MC) methods have the potential to improve the accuracy of the dose calculations and are increasingly being recognised as the ‘gold standard’ for predicting dose deposition in the patient [1]. This project has three main aims: 1. To develop tools that enable the transfer of treatment plan information from the treatment planning system (TPS) to a MC dose calculation engine. 2. To develop tools for comparing the 3D dose distributions calculated by the TPS and the MC dose engine. 3. To investigate the radiobiological significance of any errors between the TPS patient dose distribution and the MC dose distribution in terms of Tumour Control Probability (TCP) and Normal Tissue Complication Probabilities (NTCP). The work presented here addresses the first two aims. Methods: (1a) Plan Importing: A database of commissioned accelerator models (Elekta Precise and Varian 2100CD) has been developed for treatment simulations in the MC system (EGSnrc/BEAMnrc). Beam descriptions can be exported from the TPS using the widespread DICOM framework, and the resultant files are parsed with the assistance of a software library (PixelMed Java DICOM Toolkit). The information in these files (such as the monitor units, the jaw positions and gantry orientation) is used to construct a plan-specific accelerator model which allows an accurate simulation of the patient treatment field. (1b) Dose Simulation: The calculation of a dose distribution requires patient CT images which are prepared for the MC simulation using a tool (CTCREATE) packaged with the system. Beam simulation results are converted to absolute dose per- MU using calibration factors recorded during the commissioning process and treatment simulation. These distributions are combined according to the MU meter settings stored in the exported plan to produce an accurate description of the prescribed dose to the patient. (2) Dose Comparison: TPS dose calculations can be obtained using either a DICOM export or by direct retrieval of binary dose files from the file system. Dose difference, gamma evaluation and normalised dose difference algorithms [2] were employed for the comparison of the TPS dose distribution and the MC dose distribution. These implementations are spatial resolution independent and able to interpolate for comparisons. Results and Discussion: The tools successfully produced Monte Carlo input files for a variety of plans exported from the Eclipse (Varian Medical Systems) and Pinnacle (Philips Medical Systems) planning systems: ranging in complexity from a single uniform square field to a five-field step and shoot IMRT treatment. The simulation of collimated beams has been verified geometrically, and validation of dose distributions in a simple body phantom (QUASAR) will follow. The developed dose comparison algorithms have also been tested with controlled dose distribution changes. Conclusion: The capability of the developed code to independently process treatment plans has been demonstrated. A number of limitations exist: only static fields are currently supported (dynamic wedges and dynamic IMRT will require further development), and the process has not been tested for planning systems other than Eclipse and Pinnacle. The tools will be used to independently assess the accuracy of the current treatment planning system dose calculation algorithms for complex treatment deliveries such as IMRT in treatment sites where patient inhomogeneities are expected to be significant. Acknowledgements: Computational resources and services used in this work were provided by the HPC and Research Support Group, Queensland University of Technology, Brisbane, Australia. Pinnacle dose parsing made possible with the help of Paul Reich, North Coast Cancer Institute, North Coast, New South Wales.

Verification of patient position and delivery of IMRT by electronic Portal Imaging

We have taken a new method of calibrating portal images of IMRT beams and used this to measure patient set-up accuracy and delivery errors, such as leaf errors and segment intensity errors during treatment. A calibration technique was used to remove the intensity modulations from the images leaving equivalent open field images that show patient anatomy that can be used for verification of the patient position. The images of the treatment beam can also be used to verify the delivery of the beam in terms of multileaf collimator leaf position and dosimetric errors. A series of controlled experiments delivering an IMRT anterior beam to the head and neck of a humanoid phantom were undertaken. A 2mm translation in the position of the phantom could be detected. With intentional introduction of delivery errors into the beam this method allowed us to detect leaf positioning errors of 2mm and variation in monitor units of 1%. The method was then applied to the case of a patient who received IMRT treatment to the larynx and cervical nodes. The anterior IMRT beam was imaged during four fractions and the images calibrated and investigated for the characteristic signs of patient position error and delivery error that were shown in the control experiments. No significant errors were seen. The method of imaging the IMRT beam and calibrating the images to remove the intensity modulations can be a useful tool in verifying both the patient position and the delivery of the beam.

Let the journey begin : cultivating student identity and a sense of belonging through a formal academic welcome

Queensland University of Technology [QUT] Caboolture campus is a satellite campus co-located with Brisbane North Institute of TAFE. Building a sense of belonging on-campus continues to be challenging, with anecdotal evidence suggesting that QUT Caboolture students feel like second-class students, isolated from the prestige and excitement of the city campuses. A student identity and fostering a sense of belonging are fundamental to on-campus engagement and have been linked to retention (Field & Morgan-Klein, 2010). A formal welcome ceremony, including an academic procession in full regalia, was a new inclusion for QUT Caboolture’s 2013 Orientation Day. The ritual was intended to be a temporal mark for students to recognise their personal transition and emerging identity as a university student. Cultural capital is one ingredient in a complex mix of interactions and relationships to build a sense of identity. (Ecclestone, Biesta & Hughes, 2010). Fostering a sense of belonging and a connection to the campus and its staff was also anticipated. Students responded positively to the event, reporting feelings of excitement, inspiration and being welcomed into the university culture. The ceremony marked the beginning of the students’ journey together as QUT Caboolture students.

Making a name for themselves : Karen identity and the politicization of ethnicity in Burma

The history of Karen nationalism has been interpreted in terms of inter-ethnic conflict and conceptualizations of ethnicity have influenced understanding of Karen political identity. While 'Karen' incorporated various linguistic, sociocultural, religious and political sub-groups, the Karen National Union (KNU) elite promoted a singular pan-Karen identity in order to minimize such diversity. As a result, factionalism emerged between different Karen groups, obstructing the KNU's political vision and leaving many Karens dissatisfied with KNU attempts to represent their various interests. The fall of Manerplaw in 1995 was thus the result of intra-ethnic conflict as much as conflict between Karens and non-Karens

Supporting transition to law school and student well-being : the role of professional legal identity

The empirically established decline in law student well being during the first year of law school is a red-flagged imprimatur for first year curriculum change. This article suggests that by engaging law students with the concept of a positive professional identity, student engagement and intrinsic motivation will increase because they are working towards a career goal that has meaning and purpose. Law school is a time of professional transformation and the legal academy can take steps to ensure that this transformation is inculcated with positive messages. Literature from the fields of law and psychology is analysed in this article, to explain how a positive conception of the legal profession (and a student’s future role within it) can increase a student’s psychological well-being – at law school and beyond.

Transition to law school and law student well-being : The importance of professional legal identity

The empirically established decline in law student well-being during the first year of law school is a red-flagged imprimatur for first year curriculum change. This article suggests that by engaging law students with the concept of a positive professional identity, student engagement and intrinsic motivation will increase because they are working towards a career goal that has meaning and purpose. Law school is a time of professional transformation and the legal academy can take steps to ensure that this transformation is inculcated with positive messages. Literature from the fields of law and psychology is analysed in this article, to explain how a positive conception of the legal profession (and a student’s future role within it) can increase a student’s psychological well-being – at law school and beyond.

Refined plastic hinge analysis of steel frame structures comprising non-compact sections : II : verification

Application of "advanced analysis" methods suitable for non-linear analysis and design of steel frame structures permits direct and accurate determination of ultimate system strengths, without resort to simplified elastic methods of analysis and semi-empirical specification equations. However, the application of advanced analysis methods has previously been restricted to steel frames comprising only compact sections that are not influenced by the effects of local buckling. A refined plastic hinge method suitable for practical advanced analysis of steel frame structures comprising non-compact sections is presented in a companion paper. The method implicitly accounts for the effects of gradual cross-sectional yielding, longitudinal spread of plasticity, initial geometric imperfections, residual stresses, and local buckling. The accuracy and precision of the method for the analysis of steel frames comprising non-compact sections is established in this paper by comparison with a comprehensive range of analytical benchmark frame solutions. The refined plastic hinge method is shown to be more accurate and precise than the conventional individual member design methods based on elastic analysis and specification equations.

Reflection as a dialogic strategy for developing a professional identity

The benefits of reflective practice have been well established in the literature (Rogers, 2001), as have models to embed reflective thinking in higher education curriculum (Ryan and Ryan, 2012). Reflection is commonly envisaged as a textual practice, through which students ‘reflect in and on action’ (Schön 1983), and articulate their experiences, learning and outcomes in written portfolios, journals, or blogs. While such approaches to individual written reflection are undoubtedly beneficial for deepening insight and self-criticality, reflection can also provide other benefits when approached as a collaborative, oral activity. This poster presents a dialogic model of reflective practice that affords the opportunity for developing presentation skills, critique, community and professional identity formation. This dialogic approach to reflection is illustrated by a first year subject (‘KIB101 Visual Communication’ at QUT), in which students apply visual theory (presented in lectures) to communication and graphic design problems in the studio. In regular (fortnightly) presentations, they critically reflect upon their work in progress by aligning it with the concepts, design principles and professional language of the lectures. This iterative process facilitates responsive peer feedback, similarly couched in the formal terms of the discipline. This ‘mirrored reflection’ not only provides opportunities to incrementally improve, it also sets designs in a theoretical frame; provides the opportunity for comparative analysis (to see design principles applied by peers in different ways); to practice formal design language and presentation techniques of the discipline and; because peer critique is framed as an act of generosity; it affords the development of a supportive community of practice. In these ways, dialogic reflection helps students develop a professional voice and identity from first year. Evidence of impact is provided by quantitative and qualitative student feedback over several years, as well as institutional feedback and recognition.

The Cairns abortion trial : deviance, stigma and the spoiled identity

In 2010 a couple in Cairns were charged, and later found not guilty, of illegally obtaining a medical abortion through the use of medication imported from overseas. The court case reignited the contentious debate surrounding the illegality and social acceptance of abortion in Queensland, Australia. Based on a critical discourse analysis of 150 online news media articles covering the Cairns trial, this paper argues that the media shapes perceptions of deviance and stigma in relation to abortion through the use of language. In this case, the Cairns couple were positioned as deviant for pursuing abortion on the basis that they were rejecting the social norm of motherhood. This paper identifies three key themes evident in the articles analysed which contribute to shaping the construction of deviance – the humanising of the foetus, the stereotyping of the traditional female role of mother, and the demonising of women who choose abortion. This paper argues that the use of specific language in media coverage of abortion has the power to disrespect and invalidate the experiences, rights, and health of women who choose to terminate pregnancies.