Researching doctoral pedagogy close up : design and action in two doctoral programs

With growing international interest in diversifying sites for pedagogical work within the doctorate, doctoral programs of different kinds are being developed in different disciplinary, institutional and national settings. However, little is known about how the pedagogical work of these programs is designed and enacted, and with what effects. In this paper, we present two cases of doctoral pedagogical work being undertaken within different disciplinary and institutional settings to describe how learning opportunities were designed and to theorise what it means to be engaged in doing doctoral pedagogy. Starting from the position that working from a design model supports systematic and rigorous documentation and development of pedagogy, we employ the twin concepts of design and action, drawing broadly on rhetorical and ethnomethodological understandings of pedagogy as social action. Of particular interest within the concept of design itself is the concept of enactment, the translation of designs into the practices of doctoral work. Together, the two cases become a resource for ‘slowing down’ and making visible the practices of doctoral pedagogy that often go unrecognised because they appear so ordinary and everyday. This call for examining close-up existing doctoral education practices and relationships is attending to the ‘next challenge for doctoral education’ (Green, 2009).

Analyzing the factors influencing the successful design and uptake of interactive systems to support social networks in urban neighborhoods

In urban residential environments in Australia and other developed countries, Internet access is on the verge of becoming a ubiquitous utility like gas or electricity. From an urban sociology and community informatics perspective, this article discusses new emerging social formations of urban residents that are based on networked individualism and the potential of Internet-based systems to support them. It proposes that one of the main reasons for the disappearance or nonexistence of urban residential communities is a lack of appropriate opportunities and instruments to encourage and support local interaction in urban neighborhoods. The article challenges the view that a mere reappropriation of applications used to support dispersed virtual communities is adequate to meet the place and proximity-based design requirements that community networks in urban neighborhoods pose. It argues that the key factors influencing the successful design and uptake of interactive systems to support social networks in urban neighborhoods include the swarming social behavior of urban dwellers; the dynamics of their existing communicative ecology; and the serendipitous, voluntary, and place-based quality of interaction between residents on the basis of choice, like-mindedness, mutual interest and support needs. Drawing on an analysis of these factors, the conceptual design framework of a prototype system — the urban tribe incubator — is presented.

Preface to special issue on digital human modelling for vehicle design and manufacturing

The automotive industry has been the focus of digital human modeling (DHM) research and application for many years. In the highly competitive marketplace for personal transportation, the desire to improve the customer’s experience has driven extensive research in both the physical and cognitive interaction between the vehicle and its occupants. Human models provide vehicle designers with tools to view and analyze product interactions before the first prototypes are built, potentially improving the design while reducing cost and development time. The focus of DHM research and applications began with prediction and representation of static postures for purposes of driver workstation layout, including assessments of seat adjustment ranges and exterior vision. Now DHMs are used for seat design and assessment of driver reach and ingress/egress. DHMs and related simulation tools are expanding into the cognitive domain, with computational models of perception and motion, and into the dynamic domain with models of physical responses to ride and vibration. Moreover, DHMs are now widely used to analyze the ergonomics of vehicle assembly tasks. In this case, the analysis aims to determine whether workers can be expected to complete the tasks safely and with good quality. This preface provides a review of the literature to provide context for the nine new papers presented in this special issue.

Network interactions and performance of a multi-function IEC 61850 process bus

New substation technology, such as non-conventional instrument transformers,and a need to reduce design and construction costs, are driving the adoption of Ethernet based digital process bus networks for high voltage substations. Protection and control applications can share a process bus, making more efficient use of the network infrastructure. This paper classifies and defines performance requirements for the protocols used in a process bus on the basis of application. These include GOOSE, SNMP and IEC 61850-9-2 sampled values. A method, based on the Multiple Spanning Tree Protocol (MSTP) and virtual local area networks, is presented that separates management and monitoring traffic from the rest of the process bus. A quantitative investigation of the interaction between various protocols used in a process bus is described. These tests also validate the effectiveness of the MSTP based traffic segregation method. While this paper focusses on a substation automation network, the results are applicable to other real-time industrial networks that implement multiple protocols. High volume sampled value data and time-critical circuit breaker tripping commands do not interact on a full duplex switched Ethernet network, even under very high network load conditions. This enables an efficient digital network to replace a large number of conventional analog connections between control rooms and high voltage switchyards.

Preliminary Design and Performance Estimation of Radial Inflow Turbines: An Automated Approach

A comprehensive one-dimensional meanline design approach for radial inflow turbines is described in the present work. An original code was developed in Python that takes a novel approach to the automatic selection of feasible machines based on pre-defined performance or geometry characteristics for a given application. It comprises a brute-force search algorithm that traverses the entire search space based on key non-dimensional parameters and rotational speed. In this study, an in-depth analysis and subsequent implementation of relevant loss models as well as selection criteria for radial inflow turbines is addressed. Comparison with previously published designs, as well as other available codes, showed good agreement. Sample (real and theoretical) test cases were trialed and results showed good agreement when compared to other available codes. The presented approach was found to be valid and the model was found to be a useful tool with regards to the preliminary design and performance estimation of radial inflow turbines, enabling its integration with other thermodynamic cycle analysis and three-dimensional blade design codes.

Design and Anthropology

Design and Anthropology challenges conventional thinking regarding the nature of design and creativity, in a way that acknowledges the improvisatory skills and perceptual acuity of people. Combining theoretical investigations and documentation of practice based experiments, it addresses methodological questions concerning the re-conceptualisation of the relation between design and use from both theoretical and practice-based positions. Concerned with what it means to draw 'users' into processes of designing and producing this book emphasises the creativity of design and the emergence of objects in social situations and collaborative endeavours. Organised around the themes of perception and the user-producer, skilled practices of designing and using, and the relation between people and things, the book contains the latest work of researchers from academia and industry, to enhance our understanding of ethnographic practice and develop a research agenda for the emergent field of design anthropology. Drawing together work from anthropologists, philosophers, designers, engineers, scholars of innovation and theatre practitioners, Design and Anthropology will appeal to anthropologists and to those working in the fields of design and innovation, and the philosophy of technology and engineering.

Curriculum design and higher order skills : challenging assumptions

This paper is based on an Australian Learning & Teaching Council (ALTC) funded evaluation in 13 universities across Australia and New Zealand of the use of Engineers Without Borders (EWB) projects in first-year engineering courses. All of the partner institutions have implemented this innovation differently and comparison of these implementations affords us the opportunity to assemble "a body of carefully gathered data that provides evidence of which approaches work for which students in which learning environments". This study used a mixed-methods data collection approach and a realist analysis. Data was collected by program logic analysis with course co-ordinators, observation of classes, focus groups with students, exit survey of students and interviews with staff as well as scrutiny of relevant course and curriculum documents. Course designers and co-ordinators gave us a range of reasons for using the projects, most of which alluded to their presumed capacity to deliver experience in and learning of higher order thinking skills in areas such as sustainability, ethics, teamwork and communication. For some students, however, the nature of the projects decreased their interest in issues such as ethical development, sustainability and how to work in teams. We also found that the projects provoked different responses from students depending on the nature of the courses in which they were embedded (general introduction, design, communication, or problem-solving courses) and their mode of delivery (lecture, workshop or online).

Modification of advanced programmatic risk analysis and management model for the whole project life cycle’s risks

The advanced programmatic risk analysis and management model (APRAM) is one of the recently developed methods that can be used for risk analysis and management purposes considering schedule, cost, and quality risks simultaneously. However, this model considers those failure risks that occur only over the design and construction phases of a project’s life cycle. While it can be sufficient for some projects for which the required cost during the operating life is much less than the budget required over the construction period, it should be modified in relation to infrastructure projects because the associated costs during the operating life cycle are significant. In this paper, a modified APRAM is proposed, which can consider potential risks that might occur over the entire life cycle of the project, including technical and managerial failure risks. Therefore, the modified model can be used as an efficient decision-support tool for construction managers in the housing industry in which various alternatives might be technically available. The modified method is demonstrated by using a real building project, and this demonstration shows that it can be employed efficiently by construction managers. The Delphi method was applied in order to figure out the failure events and their associated probabilities. The results show that although the initial cost of a cold-formed steel structural system is higher than a conventional construction system, the former’s failure cost is much lower than the latter’s

Bilingual asynchronous online discussion groups : design and delivery of an e-Learning distance study module for nurse academics in a developing country

The advent of eLearning has seen online discussion forums widely used in both undergraduate and postgraduate nursing education. This paper reports an Australian university experience of design, delivery and redevelopment of a distance education module developed for Vietnamese nurse academics. The teaching experience of Vietnamese nurse academics is mixed and frequently limited. It was decided that the distance module should attempt to utilise the experience of senior Vietnamese nurse academics - asynchronous online discussion groups were used to facilitate this. Online discussion occurred in both Vietnamese and English and was moderated by an Australian academic working alongside a Vietnamese translator. This paper will discuss the design of an online learning environment for foreign correspondents, the resources and translation required to maximise the success of asynchronous online discussion groups, as well as the rationale of delivering complex content in a foreign language. While specifically addressing the first iteration of the first distance module designed, this paper will also address subsequent changes made for the second iteration of the module and comment on their success. While a translator is clearly a key component of success, the elements of simplicity and clarity combined with supportive online moderation must not be overlooked.

Design and delivery of a distance education programme : educating Vietnamese nurse academics from Australia

In 2008 a move away from medical staff providing nursing education in Vietnam saw the employment of many new nurse academics. To assist in the instruction of these novice academics and provide them with sound teaching and learning practice as well as curriculum design and implementation skills, Queensland University of Technology (QUT) successfully tendered an international grant. One of QUT’s initiatives in educating the Vietnamese academics was a distance learning programme. Developed specifically for Vietnamese nurse academics, the programme was designed for Australian based delivery to academics in Vietnam. This paper will present an overview of why four separate modules were utilised for the delivery of content (modules were delivered at a rate of one per semester). It will address bilingual online discussion boards which were used in each of the modules and the process of moderating these given comments were posted in both Vietnamese and English. It will describe how content was scaffolded across four modules and how the modules themselves modelled new teaching delivery strategies. Lastly, it will discuss the considerations of programme delivery given the logistics of an Australian based delivery. Feedback from the Vietnamese nurse academics across their involvement in the programme (and at the conclusion of their fourth and final module) has been overwhelmingly positive. Feedback suggests the programme has altered teaching and assessment approaches used by some Vietnamese nurse academics. Additionally, Vietnamese nurse academics are reporting that they are engaging more with the application of their content indicating a cultural shift in the approach taken in Vietnamese nurse education.

Legal issues in the design and implementation of environmental offset and environmental trading frameworks

The Queensland Government released its new Environmental Offset Policy in July 2008. This policy creates a set of overarching principles which are to be incorporated into existing environmental offset policy. This article is the final article in a set of three interrelated articles discussing the operation and implementation of environmental offsets in Queensland. The first article discusses the Environmental Offsets Discussion Paper and the existing environmental offset requirements. No significant changes have been made to these existing offset requirements under the new Environmental Offset Policy. This article also touches briefly on the legal issues associated with design and implementation of environmental offset and trading frameworks. The second article considered the compatibility of different land tenure arrangements in Queensland against the requirements for the creation and trade of environmental offsets. The third article being the present article, discusses the application of the new Environmental Offset Policy while also analysing the legal issues associated with environmental offsets in further detail.

Design and modeling of collaboration architecture for security

Threats against computer networks evolve very fast and require more and more complex measures. We argue that teams respectively groups with a common purpose for intrusion detection and prevention improve the measures against rapid propagating attacks similar to the concept of teams solving complex tasks known from field of work sociology. Collaboration in this sense is not easy task especially for heterarchical environments. We propose CIMD (collaborative intrusion and malware detection) as a security overlay framework to enable cooperative intrusion detection approaches. Objectives and associated interests are used to create detection groups for exchange of security-related data. In this work, we contribute a tree-oriented data model for device representation in the scope of security. We introduce an algorithm for the formation of detection groups, show realization strategies for the system and conduct vulnerability analysis. We evaluate the benefit of CIMD by simulation and probabilistic analysis.

Querying a building information model for construction-specific spatial information

The design and construction community has shown increasing interest in adopting building information models (BIMs). The richness of information provided by BIMs has the potential to streamline the design and construction processes by enabling enhanced communication, coordination, automation and analysis. However, there are many challenges in extracting construction-specific information out of BIMs. In most cases, construction practitioners have to manually identify the required information, which is inefficient and prone to error, particularly for complex, large-scale projects. This paper describes the process and methods we have formalized to partially automate the extraction and querying of construction-specific information from a BIM. We describe methods for analyzing a BIM to query for spatial information that is relevant for construction practitioners, and that is typically represented implicitly in a BIM. Our approach integrates ifcXML data and other spatial data to develop a richer model for construction users. We employ custom 2D topological XQuery predicates to answer a variety of spatial queries. The validation results demonstrate that this approach provides a richer representation of construction-specific information compared to existing BIM tools.