Children’s accommodation during reading of Chinese and English texts

Purpose: Inaccurate accommodation during nearwork and subsequent accommodative hysteresis may influence myopia development. Myopia is highly prevalent in Singapore; an untested theory is that Chinese children are prone to these accommodation characteristics. We measured the accuracy of accommodation responses during and nearwork-induced transient myopia (NITM) after periods spent reading Chinese and English texts. Methods: Refractions of 40 emmetropic and 43 myopic children were measured with a free-space autorefractor for four reading tasks of 10-minute durations: Chinese (SimSun, 10.5 points) and English (Times New Roman, 12 points) texts at 25 cm and 33 cm. Accuracy was obtained by subtracting accommodation response from accommodation demand. Nearwork-induced transient myopia was obtained by subtracting pretask distance refraction from posttask refraction, and regression was determined as the time for the posttask refraction to return to pretask levels. Results: There were significant, but small, effects of text type (Chinese, 0.97 ± 0.32 diopters [D] vs. English, 1.00 ± 0.37 D; F1,1230 = 7.24, p = 0.007) and reading distance (33 cm, 1.01 ± 0.30 D vs. 25 cm, 0.97 ± 0.39 D; F1,1230 = 7.74, p = 0.005) on accommodation accuracy across all participants. Accuracy was similar for emmetropic and myopic children across all reading tasks. Neither text type nor reading distance had significant effects on NITM or its regression. Myopes had greater NITM (by 0.07 D) (F1,81 = 5.05, p = 0.03) that took longer (by 50s) (F1,81 = 31.08, p < 0.01) to dissipate. Conclusions: Reading Chinese text caused smaller accommodative lags than reading English text, but the small differences were not clinically significant. Myopic children had significantly greater NITM and longer regression than emmetropic children for both texts. Whether differences in NITM are a cause or consequence of myopia cannot be answered from this study.

Channel tracking in SDMA-based multi-user MIMO-OFDM communications systems

Capacity of current and future high data rate wireless communications depend significantly on how well changes in the wireless channel are predicted and tracked. Generally, this can be estimated by transmitting known symbols. However, this increases overheads if the channel varies over time. Given today’s bandwidth demand and the increased necessity for mobile wireless devices, the contributions of this research are very significant. This study has developed a novel and efficient channel tracking algorithm that can recursively update the channel estimation for wireless broadband communications reducing overheads, therefore increasing the speed of wireless communication systems.

Playing with Grammar in the Early Years : Learning about Language in the Australian Curriculum : English

As teacher/researchers interested in the pursuit of socially-just outcomes in early childhood education, the form and function of language occupies a special position in our work. We believe that mastering a range of literacy competences includes not only the technical skills for learning, but also the resources for viewing and constructing the world (Freire and Macdeo, 1987). Rather than seeing knowledge about language as the accumulation of technical skills alone, the viewpoint to which we subscribe treats knowledge about language as a dialectic that evolves from, is situated in, and contributes to a social arena (Halliday, 1978). We do not shy away from this position just because children are in the early years of schooling. In ‘Playing with Grammar’, we focus on the Foundation to Year 2 grouping, in line with the Australian Curriculum, Assessment and Reporting Authority’s (hereafter ACARA) advice on the ‘nature of learners’ (ACARA, 2013). With our focus on the early years of schooling comes our acknowledgement of the importance and complexity of play. At a time where accountability in education has moved many teachers to a sense of urgency to prove language and literacy achievement (Genishi and Dyson, 2009), we encourage space to revisit what we know about literature choices and learning experiences and bring these together to facilitate language learning. We can neither ignore, nor overemphasise, the importance of play for the development of language through: the opportunities presented for creative use and practice; social interactions for real purposes; and, identifying and solving problems in the lives of young children (Marsh and Hallet, 2008). We argue that by engaging young children in opportunities to play with language we are ultimately empowering them to be active in their language learning and in the process fostering a love of language and the intricacies it holds. Our goal in this publication is to provide a range of highly practical strategies for scaffolding young children through some of the Content Descriptions from the Australian Curriculum English Version 5.0, hereafter AC:E V5.0 (ACARA, 2013). This recently released curriculum offers a new theoretical approach to building children’s knowledge about language. The AC:E V5.0 uses selected traditional terms through an approach developed in systemic functional linguistics (see Halliday and Matthiessen, 2004) to highlight the dynamic forms and functions of multimodal language in texts. For example, the following statement, taken from the ‘Language: Knowing about the English language’ strand states: English uses standard grammatical terminology within a contextual framework, in which language choices are seen to vary according to the topics at hand, the nature and proximity of the relationships between the language users, and the modalities or channels of communication available (ACARA, 2013). Put simply, traditional grammar terms are used within a functional framework made up of field, tenor, and mode. An understanding of genre is noted with the reference to a ‘contextual framework’. The ‘topics at hand’ concern the field or subject matter of the text. The ‘relationships between the language users’ is a description of tenor. There is reference to ‘modalities’, such as spoken, written or visual text. We posit that this innovative approach is necessary for working with contemporary multimodal and cross-cultural texts (see Exley and Mills, 2012). We believe there is enormous power in using literature to expose children to the richness of language and in turn develop language and literacy skills. Taking time to look at language patterns within actual literature is a pathway to ‘…capture interest, stir the imagination and absorb the [child]’ into the world of language and literacy (Saxby, 1993, p. 55). In the following three sections, we have tried to remain faithful to our interpretation of the AC:E V5.0 Content Descriptions without giving an exhaustive explanation of the grammatical terms. Other excellent tomes, such as Derewianka (2011), Humphrey, Droga and Feez (2012), and Rossbridge and Rushton (2011) provide these more comprehensive explanations as does the AC:E V5.0 Glossary. We’ve reproduced some of the AC:E V5.0 glossary at the end of this publication. Our focus is on the structure and unfolding of the learning experiences. We outline strategies for working with children in Foundation, Year 1 and Year 2 by providing some demonstration learning experiences based on texts we’ve selected, but maintain that the affordances of these strategies will only be realised when teaching and learning is purposively tied to authentic projects in local contexts. We strongly encourage you not to use only the resource texts we’ve selected, but to capitalise upon your skill for identifying the language features in the texts you and the children are studying and adapt some of the strategies we have outlined. Each learning experience is connected to one of the Content Descriptions from the AC:E V5.0 and contains an experience specific purpose, a suggested resource text and a sequence for the experience that always commences with an orientation to text followed by an examination of a particular grammatical resource. We expect that each of these learning experiences will take a couple if not a few teaching episodes to work through, especially if children are meeting a concept for the first time. We hope you use as much, or as little, of each experience as is needed. Our plans allow for focused discussion, shared exploration and opportunities to revisit the same text for the purpose of enhancing meaning making. We do not want the teaching of grammar to slip into a crisis of irrelevance or to be seen as a series of worksheet drills with finite answers. Strategies for effective practice, however, have much portability. We are both very keen to hear from teachers who are adopting and adapting these learning experiences in their classrooms. Please email us on b.exley@qut.edu.au or lkervin@uow.edu.au. We’d love to continue the conversation with you over time.

English in the urban environment : resources for 21st century readers

Where teachers of English as a foreign language (EFL) once observed a paucity of authentic language input, public displays of written English are now proliferating. Ideas for capitalising on this abundance can be drawn from two strands of pedagogic thought: a psycholinguistic approach to conventional literacy long established in foreign, second and first language education (e.g., Teng, 2009), and a more recent and critical approach informed by diverse theoretical understandings of the ‘linguistic landscape’ (e.g., Rowland, 2013). In this paper I draw from these two approaches to suggest ways of helping EFL learners use environmental print to develop knowledge and skills required of English readers in the twenty-first century: (1) fluency in breaking the codes of English and other languages of publicly displayed text; (2) facility with making meaning as the English of these texts becomes ever more diverse in cultural, historical and contextual implication; (3) use of environmental English in contexts that range from the local to the transnational; and (4) critique of the presence of English and attendant worldviews in the urban environment (Chern & Dooley, forthcoming). The psychological concept of motivation and the complementary sociological concept of investment are at the heart of my deliberations here: realisation of the pedagogic potential of environmental print to develop literate resources requires consideration of sources of motivation in the classroom learning situation (Dörnyei & Ushioda, 2011), as well as learner investment in literate practices in English (Norton, 2010).

'Explain in plain English' questions revisited : data structures problems

Recent studies have linked the ability of novice (CS1) programmers to read and explain code with their ability to write code. This study extends earlier work by asking CS2 students to explain object-oriented data structures problems that involve recursion. Results show a strong correlation between ability to explain code at an abstract level and performance on code writing and code reading test problems for these object-oriented data structures problems. The authors postulate that there is a common set of skills concerned with reasoning about programs that explains the correlation between writing code and explaining code. The authors suggest that an overly exclusive emphasis on code writing may be detrimental to learning to program. Non-code writing learning activities (e.g., reading and explaining code) are likely to improve student ability to reason about code and, by extension, improve student ability to write code. A judicious mix of code-writing and code-reading activities is recommended.

Hybrid multi-channel cooperative spectrum sensing to satisfy channel target

Spectrum sensing of multiple primary user channels is a crucial function in cognitive radio networks. In this paper we propose an optimal, sensing resource allocation algorithm for multi-channel cooperative spectrum sensing. The channel target is implemented as an objective and constraint to ensure a pre-determined number of empty channels are detected for secondary user network operations. Based on primary user traffic parameters, we calculate the minimum number of primary user channels that must be sensed to satisfy the channel target. We implement a hybrid sensing structure by grouping secondary user nodes into clusters and assign each cluster to sense a different primary user channels. We then solve the resource allocation problem to find the optimal sensing configuration and node allocation to minimise sensing duration. Simulation results show that the proposed algorithm requires the shortest sensing duration to achieve the channel target compared to existing studies that require long sensing and cannot guarantee the target.

Students’ perceptions and use of the Internet as a news channel

New technologies, in particular the Internet, have transformed journalistic practices in many ways around the world. While a number of studies have investigated how established journalists are dealing with and using new technologies in a number of countries, very little attention has been paid to how student journalists view and use the Internet as a source of news. This study examined the ways in which second and third-year journalism and arts students at the University of Queensland (Australia) get their news, how they use the Internet as a news channel, as well as their perceptions and use of other new technologies. The authors draw on the theoretical frameworks of uses and gratifications, as well as the media richness theory to explore the primary reasons why students use and perceive the Internet as a news channel.

Use of hospital emergency departments by immigrants from non-English speaking backgrounds in Queensland

This study aimed to examine the use of hospital emergency departments and to investigate the level of satisfaction with the emergency department service among patients from a non-English-speaking background compared to those of patients from an English-speaking background in Queensland. The findings of this study might inform health professionals and policy planners to develop educational interventions and policies to ensure equitable use of emergency services among the populations.

The ‘Indigenous Australian’ theme in the Australian Curriculum English : necessary or not?

On Friday 10 January 2014 Education Minister Christopher Pyne formally announced a review of the inaugural Australian curriculum. In his three and half minute televised justification, Pyne (2014) identified a number of criticisms of the national curriculum document, including the ‘necessity to have themes’ of ‘Australia’s place in Asia, Indigenous Australia and sustainability’. It is the second of these themes that we consider as ALEA’s Hot Topic for March 2014. We respond to Pyne’s momentary musing of the necessity of the ‘Indigenous Australian’ theme in the Australian Curriculum with a particular focus on the discipline of English. In the nomenclature of the Australian Curriculum, Assessment and Reporting Authority’s Australian Curriculum (ACARA, 2013), we are of course referring to the ‘cross curriculum priority’ of ‘Aboriginal and Torres Strait Islander histories and cultures’.

Web crippling tests of hollow flange channel beams – end one flange and interior one flange load cases

LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs were commonly used as floor joists and bearers with web openings in residential, industrial and commercial buildings. Due to the unique geometry of LSBs, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSBs. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear and combined actions. However, to date, no investigation has been conducted into the web crippling behaviour and strength of LSB sections. Hence detailed experimental studies were conducted to investigate the web crippling behaviour and strengths of LSBs under EOF (End One Flange) and IOF (Interior One Flange) load cases. A total of 26 web crippling tests was conducted and the results were compared with current AS/NZS 4600 design rules. This comparison showed that AS/NZS 4600 (SA, 2005) design rules are very conservative for LSB sections under EOF and IOF load cases. Suitable design equations have been proposed to determine the web crippling capacity of LSBs based on experimental results. This paper presents the details of this experimental study on the web crippling behaviour and strengths of LiteSteel beams under EOF and IOF load cases.

Numerical modelling and design of lipped channel beams subject to shear

Cold-formed steel members are increasingly used as primary structural elements in buildings due to the availability of thin and high strength steels and advanced cold-forming technologies. Cold-formed lipped channel beams (LCB) are commonly used as flexural members such as floor joists and bearers. Many research studies have been carried out to evaluate the behaviour and design of LCBs subject to pure bending actions. However, limited research has been undertaken on the shear behaviour and strength of LCBs. Hence a numerical study was undertaken to investigate the shear behaviour and strength of LCBs. Finite element models of simply supported LCBs with aspect ratios of 1.0 and 1.5 were considered under a mid-span load. They were then validated by comparing their results with test results and used in a detailed parametric study based on the validated finite element models. Numerical studies were conducted to investigate the shear buckling and post-buckling behaviour of LCBs. Experimental and numerical results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LCBs. Improved design equations were therefore proposed for the shear strength of LCBs. This paper presents the details of this numerical study of LCBs and the results.

Effect of real support conditions on the shear strength of hollow flange channel beams

This paper presents the details of experimental studies on the effect of real support conditions on the shear strength of LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. In some applications in the building industry LSBs are used with only one web side plate (WSP) at their supports and are not used with full height web side plates (WSP) at their supports. Past research studies showed that theses real support connections did not provide simply supported conditions. Many studies have been carried out to evaluate the behaviour and design of LSBs with simply supported conditions subject to pure bending and predominant shear actions. To date, however, no investigation has been conducted into the effect of real support conditions on the shear strength of LSBs. Hence detailed experimental studies were undertaken to investigate the shear behaviour and strength of LSBs with real support conditions. A total of 28 experimental tests were conducted as part of the studies. Simply supported test specimens of LSBs with aspect ratios of 1.0 and 1.5 were loaded at mid-span until failure. It was found that the effect of using one WSP on the shear behaviour of LSB is significant and there is about 25% shear capacity reduction due to the lateral movement of the bottom flange at the supports. Shear capacity of LSB was also found to decrease when full height WSPs were not used. Suitable support connections were developed to improve the shear capacity of LSBs based on test results.

Web crippling tests of hollow flange channel beams : ETF AND ITF load cases

This paper presents the details of an experimental study of a cold-formed steel hollow flange channel beam known as LiteSteel Beam (LSB) subject to web crippling actions (ETF and ITF). Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, much of the existing research for common cold-formed steel sections is not directly applicable to LSB. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies were conducted to assess the web crippling behaviour and strengths of LSBs. Twenty eight web crippling tests were conducted and the results were compared with the current AS/NZS 4600[1] and AISI S100 [2]design equations. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600[1] and AISI S100 [2] design equations are unconservative for LSB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs. Suitable design rules were also developed under the DSM format.

Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions

LiteSteel beam (LSB) is a cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. It is commonly used as floor joists and bearers in residential, industrial and commercial buildings. Design of the LSB is governed by the Australian cold-formed steel structures code, AS/NZS 4600. Due to the geometry of the LSB, as well as its unique residual stress characteristics and initial geometric imperfections resultant of manufacturing processes, currently available design equations for common cold-formed sections are not directly applicable to the LSB. Many research studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions and predominant shear actions. To date, however, no investigation has been conducted into the strength of LSB sections under combined bending and shear actions. Hence experimental and numerical studies were conducted to assess the combined bending and shear behaviour of LSBs. Finite element models of LSBs were developed to simulate their combined bending and shear behaviour and strength of LSBs. They were then validated by comparing the results with available experimental test results and used in a detailed parametric study. The results from experimental and finite element analyses were compared with current AS/NZS 4600 and AS 4100 design rules. Both experimental and numerical studies show that the AS/NZS 4600 design rule based on circular interaction equation is conservative in predicting the combined bending and shear capacities of LSBs. This paper presents the details of the numerical studies of LSBs and the results. In response to the inadequacies of current approaches to designing LSBs for combined bending and shear, two lower bound design equations are proposed in this paper.