A sensitivity analysis of train speed and its effect on railway capacity

Increasing train speeds is conceptually a simple and straight forward method to expand railway capacity, for example in comparison to other more extensive and elaborate alternatives. In this article an analytical capacity model has been investigated as a means of performing a sensitivity analysis of train speeds. The results of this sensitivity analysis can help improve the operation of this railway system and to help it cope with additional demands in the future. To test our approach a case study of the Rah Ahane Iran (RAI) national railway network has been selected. The absolute capacity levels for this railway network have been determined and the analysis shows that increasing trains speeds may not be entirely cost effective in all circumstances.

Going live : building academic capacity in blended learning using web-conferencing technologies

This paper reports on a current initiative at Queensland University of Technology to provide timely, flexible and sustainable training and support to academic staff in blended learning and associated techno-pedagogies via a web-conferencing classroom and collaboration tool, Elluminate Live!. This technology was first introduced to QUT in 2008 as part of the university‘s ongoing commitment to meeting the learning needs of diverse student cohorts. The centralised Learning Design team, in collaboration with the university‘s department of eLearning Services, was given the task of providing training and support to academic staff in the effective use of the technology for teaching and learning, as part of the team‘s ongoing brief to support and enhance the provision of blended learning throughout the university. The resulting program, ―Learning Design Live‖ (LDL) is informed by Rogers‘ theory of innovation and diffusion (2003) and structured according to Wilson‘s framework for faculty development (2007). This paper discusses the program‘s design and structure, considers the program‘s impact on academic capacity in blended learning within the institution, and reflects on future directions for the program and emerging insights into blended learning and participant engagement for both staff and students.

Simvastatin - from cholesterol to venous ulcers?

It is estimated that up to three per 1,000 of the Australian adult population are affected by leg ulcers. Venous ulcers are the most common cause of ulceration in the lower extremities, accounting for approximately 80-85% of leg ulcers. These debilitating, and often painful ulcers recur frequently and can affect people of all ages, though the risk increases dramatically with age (approximately 99% of those with venous ulcers in Australia are over 65 years of age). Other risk factors include a family history of leg ulceration, varicose veins, venous disease, phlebitis, deep vein thrombosis, congestive heart failure, obesity, immobility, and previous leg injury. The chronic and recurring nature of venous ulcers, in addition to reduced quality of life for the patient, and ongoing costs of care place a significant burden of disease on the patient, and health system...

Signaling pathway genes for blood pressure, folate and cholesterol levels among hypertensives : an epistasis analysis

Irregular atrial pressure, defective folate and cholesterol metabolism contribute to the pathogenesis of hypertension. However, little is known about the combined roles of the methylenetetrahydrofolate reductase (MTHFR), apolipoprotein-E (ApoE) and angiotensin-converting enzyme (ACE) genes, which are involved in metabolism and homeostasis. The objective of this study is to investigate the association of the MTHFR 677 C>T and 1298A>C, ACE insertion–deletion (I/D) and ApoE genetic polymorphisms with hypertension and to further explore the epistasis interactions that are involved in these mechanisms. A total of 594 subjects, including 348 normotensive and 246 hypertensive ischemic stroke subjects were recruited. The MTHFR 677 C>T and 1298A>C, ACE I/D and ApoEpolymorphisms were genotyped and the epistasis interaction were analyzed. The MTHFR 677 C>T and ApoE polymorphisms demonstrated significant associations with susceptibility to hypertension in multiple logistic regression models, multifactor dimensionality reduction and a classification and regression tree. In addition, the logistic regression model demonstrated that significant interactions between the ApoE E3E3, E2E4, E2E2 and MTHFR 677 C>T polymorphisms existed. In conclusion, the results of this epistasis study indicated significant association between the ApoE and MTHFR polymorphisms and hypertension.

The role of university research centres in building road safety capacity : implications for China

In recent decades, highly motorised countries, such as Australia, have witnessed significant improvements in population health through reductions in fatalities and injuries from road traffic crashes. In Australia, concerted efforts have been made to reduce the road trauma burden since road fatalities reached their highest level in in the early 1970s. Since that time, many improvements have been made drawing on various disciplines to reduce the trauma burden (e.g., road and vehicle design, road user education, traffic law enforcement practices and enforcement technologies). While road fatalities have declined significantly since the mid-1970s, road trauma remains a serious public health concern in Australia. China has recently become the largest car market in the world (Ma, Li, Zhou, Duan, & Bishai, 2012). This rapid motorisation has been accompanied by substantial expansion of the road network as well as a large road trauma burden. Road traffic injuries are a major cause of death in China, reported as accounting for one third of all injury-deaths between 2002 and 2006 (Ma et al., 2012). In common with Australia, China has experienced a reported decline in fatalities since 2002 (see Hu, Wen & Baker, 2008). However, there remains a strong need for action in this area as rates of motorisation continue to climb in China. In Australia, a wide range of organisations have contributed to the improvements in road safety including government agencies, professional organisations, advocacy groups and research centres. In particular, Australia has several highly regarded and multi-disciplinary, university-based research centres that work across a range of road safety fields, including engineering, intelligent transportation systems, the psychology of road user behaviour, and traffic law enforcement. Besides conducting high-quality research, these centres fulfil an important advocacy role in promoting safer road use and facilitating collaborations with government and other agencies, at both the national and international level. To illustrate the role of these centres, an overview will be provided of the Centre for Accident Research and Road Safety-Queensland (CARRS-Q), which was established in 1996 and has gone on to become a recognised world-leader in road safety and injury prevention research. The Centre’s research findings are used to provide evidence-based recommendations to government and have directly contributed to promoting safer road use in Australia. Since 2006, CARRS-Q has also developed strong collaborative links with various universities and organisations in China to assist in building understanding, connections and capacity to assist in reducing the road trauma burden. References Hu, G., Wen, M., Baker, T. D., & Baker, S. P. (2008). Road-traffic deaths in China, 1985–2005: threat and opportunity. Injury Prevention, 14, 149-153. Ma, S., Li, Q., Zhou, M., Duan, L., & Bishai, D. (2012). Road Traffic Injury in China: A Review of National Data Sources. Traffic Injury Prevention, 13(S1), 57-63.

Axial capacity of barrette piles embedded in gravel layer

In this paper, the axial performance of two heavily instrumented barrette piles, with and without grouting, socket into gravel layer in Taipei are evaluated based on the results of pile load tests. Both piles are 44 m long with the same dimension of 0.8 by 2.7 m, installed by hydraulic long bucket. One of the piles with toe grouting was socket 6 m into gravel layer and the other pile without toe grouting was socket 3 m into gravel layer. The load versus displacement relationships at pile head, the t-z curves of upper soil layers and of bottom gravel layer, and the tip resistance versus displacement relationships are important concerns and are presented in the paper. The t-z curves interpreted from the measured data along depth are also simulated by the hyperbolic model.

Investigating tween children's capacity to conceptualise the complex issue of wellbeing

Wellbeing is an area that has gained increased global focus, particularly when considering children’s lives. With the growing focus on children’s wellbeing, it is apparent that this is an important aspect that is being considered in the policy and provision designed for children. The decision-making surrounding wellbeing provision for children typically occurs without the direct input of the children that these services are designed to benefit. With the children’s capacities being variably considered in wider society, opportunities for children to participate in decision-making on matters that affect them are often limited. The absence of children’s perspectives on matters that affect their lives, such as wellbeing, reveal that adults may be missing a key perspective when seeking to understand and cater for children’s wellbeing needs. This article outlines the results of a study that investigated how children aged 8 to 12 years o age (tweens) defined and conceptualised wellbeing. This article proposes that children can be included in the conceptualisation and development of policy and provision designed to benefit them and argues for increased presence of the voice and participation of children in wider societal initiatives.

Analyzing busway station potential capacity under mixed stopping and non-stopping operation

Busway stations are the interface between passengers and services. The station is crucial to line operation as it is typically the only location where buses can pass each other. Congestion may occur here when buses manoeuvring into and out of the platform lane interfere with bus flow, or when a queue of buses forms upstream of the platform lane blocking the passing lane. Further, some systems include operation where express buses do not observe the station, resulting in a proportion of non-stopping buses. It is important to understand the operation of the station under this type of operation and its effect on busway capacity. This study uses microscopic simulation to treat the busway station operation and to analyse the relationship between station potential capacity where all buses stop, and Mixed Potential Capacity where there is a mixture of stopping and non-stopping buses. First, the micro simulation technique is used to analyze the All Stopping Buses (ASB) scenario and then statistical model is tuned and calibrated for a specified range of controlled scenarios of dwell time characteristics Subsequently, a mathematical model is developed for Mixed Stopping Buses (MSB) Potential Capacity by introducing different proportions of express (or non-stopping) buses. The proposed models for a busway station bus capacity provide a better understanding of operation and are useful to transit agencies in busway planning, design and operation.

Analysing busway station capacity under mixed stopping and non-stopping operation

Busway stations are the interface between passengers and services. The station is crucial to line operation as it is typically the only location where buses can pass each other. Congestion may occur here when buses manoeuvring into and out of the platform lane interfere with bus flow, or when a queue of buses forms upstream of the platform lane blocking the passing lane. Further, some systems include operation where express buses do not observe the station, resulting in a proportion of non-stopping buses. It is important to understand the operation of the station under this type of operation and its effect on busway capacity. This study uses microscopic simulation to treat the busway station operation and to analyse the relationship between station potential capacity where all buses stop, and Mixed Potential Capacity where there is a mixture of stopping and non-stopping buses. First, the micro simulation technique is used to analyze the All Stopping Buses (ASB) scenario and then statistical model is tuned and calibrated for a specified range of controlled scenarios of dwell time characteristics Subsequently, a mathematical model is developed for Mixed Stopping Buses (MSB) Potential Capacity by introducing different proportions of express (or non-stopping) buses. The proposed models for a busway station bus capacity provide a better understanding of operation and are useful to transit agencies in busway planning, design and operation.

Estimating the burden of disease attributable to high cholesterol in South Africa in 2000

Objectives To estimate the burden of disease attributable to high cholesterol in adults aged 30 years and older in South Africa in 2000. Design World Health Organization comparative risk assessment (CRA) methodology was followed. Small community studies were used to derive the prevalence by population group. Population-attributable fractions were calculated and applied to revised burden of disease estimates for the relevant disease categories for each population group. The total attributable burden for South Africa in 2000 was obtained by adding the burden attributed to high cholesterol for the four population groups. Monte Carlo simulation-modelling techniques were used for uncertainty analysis. Setting South Africa. Subjects Black African, coloured, white and Indian adults aged 30 years and older. Outcome measures Mortality and disability-adjusted life years (DALYs) from ischaemic heart disease (IHD) and ischaemic stroke. Results Overall, about 59% of IHD and 29% of ischaemic stroke burden in adult males and females (30+ years) were attributable to high cholesterol (≥ 3.8 mmol/l), with marked variation by population group. High cholesterol was estimated to have caused 24 144 deaths (95% uncertainty interval 22 404 - 25 286) or 4.6% (95% uncertainty interval 4.3 - 4.9%) of all deaths in South Africa in 2000. Since most cholesterol-related cardiovascular disease events occurred in middle or old age, the loss of life years comprised a smaller proportion of the total: 222 923 DALYs (95% uncertainty interval 206 712 - 233 460) or 1.4% of all DALYs (95% uncertainty interval 1.3 - 1.4%) in South Africa in 2000. Conclusions High cholesterol is an important cardiovascular risk factor in all population groups in South Africa.

Stochastic analysis of transit route segments' passenger load variation for capacity and quality of service assessment

This paper investigates stochastic analysis of transit segment hourly passenger load factor variation for transit capacity and quality of service (QoS) analysis using Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia. It compares stochastic analysis to traditional peak hour factor (PHF) analysis to gain further insight into variability of transit route segments’ passenger loading during a study hour. It demonstrates that hourly design load factor is a useful method of modeling a route segment’s capacity and QoS time history across the study weekday. This analysis method is readily adaptable to different passenger load standards by adjusting design percentile, reflecting either a more relaxed or more stringent condition. This paper also considers hourly coefficient of variation of load factor as a capacity and QoS assessment measure, in particular through its relationships with hourly average and design load factors. Smaller value reflects uniform passenger loading, which is generally indicative of well dispersed passenger boarding demands and good schedule maintenance. Conversely, higher value may be indicative of pulsed or uneven passenger boarding demands, poor schedule maintenance, and/or bus bunching. An assessment table based on hourly coefficient of variation of load factor is developed and applied to this case study. Inferences are drawn for a selection of study hours across the weekday studied.

Stochastic analysis of transit route segments' passenger load variation for capacity & quality of service assessment

This study uses weekday Automatic Fare Collection (AFC) data on a premium bus line in Brisbane, Australia •Stochastic analysis is compared to peak hour factor (PHF) analysis for insight into passenger loading variability •Hourly design load factor (e.g. 88th percentile) is found to be a useful method of modeling a segment’s passenger demand time-history across a study weekday, for capacity and QoS assessment •Hourly coefficient of variation of load factor is found to be a useful QoS and operational assessment measure, particularly through its relationship with hourly average load factor, and with design load factor •An assessment table based on hourly coefficient of variation of load factor is developed from the case study