Low-cost railway level crossings - breaking down the barriers

Level crossing risk continues to be a significant safety concern for the security of rail operations around the world. Over the last decade or so, a third of railway related fatalities occurred as a direct result of collisions between road and rail vehicles in Australia. Importantly, nearly half of these collisions occurred at railway level crossings with no active protection, such as flashing lights or boom barriers. Current practice is to upgrade level crossings that have no active protection. However, the total number of level crossings found across Australia exceed 23,500, and targeting the proportion of these that are considered high risk (e.g. public crossings with passive controls) would cost in excess of AU$3.25 billion based on equipment, installation and commissioning costs of warning devices that are currently type approved. Level crossing warning devices that are low-cost provide a potentially effective control for reducing risk; however, over the last decade, there have been significant barriers and legal issues in both Australia and the US that have foreshadowed their adoption. These devices are designed to have significantly lower lifecycle costs compared with traditional warning devices. They often make use of use of alternative technologies for train detection, wireless connectivity and solar energy supply. This paper describes the barriers that have been encountered for the adoption of these devices in Australia, including the challenges associated with: (1) determining requisite safety levels for such devices; (2) legal issues relating to duty of care obligations of railway operators; and (3) issues of Tort liability around the use of less than fail-safe equipment. This paper provides an overview of a comprehensive safety justification that was developed as part of a project funded by a collaborative rail research initiative established by the Australian government, and describes the conceptual framework and processes being used to justify its adoption. The paper provides a summary of key points from peer review and discusses prospective barriers that may need to be overcome for future adoption. A successful outcome from this process would result in the development of a guideline for decision-making, providing a precedence for adopting low-cost level crossing warning devices in other parts of the world. The framework described in this paper also provides relevance to the review and adoption of analogous technologies in rail and other safety critical industries.

In-vehicle railway level crossing warning systems : can intelligent transport systems deliver?

Intelligent Transport System (ITS) technology is seen as a cost-effective way to increase the conspicuity of approaching trains and the effectiveness of train warnings at level crossings by providing an in-vehicle warning of an approaching train. The technology is often seen as a potential low-cost alternative to upgrading passive level crossings with traditional active warning systems (flashing lights and boom barriers). ITS platforms provide sensor, localization and dedicated short-range communication (DSRC) technologies to support cooperative applications such as collision avoidance for road vehicles. In recent years, in-vehicle warning systems based on ITS technology have been trialed at numerous locations around Australia, at level crossing sites with active and passive controls. While significant research has been conducted on the benefits of the technology in nominal operating modes, little research has focused on the effects of the failure modes, the human factors implications of unreliable warnings and the technology adoption process from the railway industry’s perspective. Many ITS technology suppliers originate from the road industry and often have limited awareness of the safety assurance requirements, operational requirements and legal obligations of railway operators. This paper aims to raise awareness of these issues and start a discussion on how such technology could be adopted. This paper will describe several ITS implementation cenarios and discuss failure modes, human factors considerations and the impact these scenarios are likely to have in terms of safety, railway safety assurance requirements and the practicability of meeting these requirements. The paper will identify the key obstacles impeding the adoption of ITS systems for the different implementation scenarios and a possible path forward towards the adoption of ITS technology.

The Hollywood effect : a comparative study of costume in Australia and the Proposition

This paper compares costuming practices in Baz Luhrmann’s Australia (2008) and John Hillcoat’s The Proposition (2005) and argues that high production values, such as in the blockbuster Australia, are not neutral mechanisms of production, but powerful prescriptive elements which do not result in a successful representation of cultural specificity. Australia is a typical blockbuster, it employs a large number of extras, it features compelling landscape shots, has been shot across four different locations and sets, and, importantly, is an international production with the 20th Century Fox. The film’s costumes were designed by Catherine Martin, who received an Oscar nomination in 2009. While global exposure of fashion in film and through celebrities’ endorsements has consolidated a historical synergy between the fashion industry and Hollywood, the Australian film and fashion industries have had a very limited exchange. Baz Luhrmann’s film is Australia’s first instance of promo-costuming and use of tie-in labels (Ferragamo, R.M.Williams, Prada, Paspaley). Catherine Martin thoroughly researched 1930s women’s wear, indigenous and stockmen’s clothing, and set up to make all costumes with a large team of costumiers and seamstresses, striving for authenticity. The Proposition won its costume designer Margot Wilson an AFI in 2005 for best costume, but compared to Australia the story, location and costumes are far harsher. Filmed around Winton in far west Queensland, the director John Hillcoat and Director of Photography Benoit Delhomme were insistent about realism, and emphasising the harshness of the Australian landscape. The realism of the costumes was derived from the fabrics and manufacturing, as well as the way they were shot, with the actors often wearing two or three layers of heavy wool during days of shooting in 50 degree heat, and the details of making and breaking down. The implication is that both films are culturally specific as they both deal with an Australian story. However, Australia is clearly produced according to a Hollywood blockbuster model, and closely matches Hollywood’s narrative and aesthetic characteristics, while The Proposition is a more modest film that eschews these conventions of beauty and glossed history. Despite its western genre-orientation, The Proposition is more successful than Australia when it comes to costuming, because its costumes are not only functional to the narrative, but, in Roland Barthes’ words, they also fulfil a prestation. This prestation highlights the social and cultural conflicts on which colonial Australia was founded, instead of gilding, and gliding, over them.

Benefits and risks of large hydrostatic recesses in hydroelectric turbine thrust bearings

Operators of hydroelectric power stations sometimes call upon engineers to modify existing hydroelectric turbines, usually several decades old, for improved maintainability and reliability. One common modification is the hybridisation of plain thrust pads to allow hydrostatic operation to reduce the risk of bearing wipe at low speed (virtually all new installations benefit from this feature). A modification such as this is not a difficult undertaking; however, there are numerous factors that need to be considered in order to maximize bearing performance. One factor that stands out above the others is whether the thrust bearing should be designed to lift the turbine immediately from the standing condition, which presents an interesting challenge: the recess has to have a sufficiently large area in order for the supply pressure to be able to overcome the dead weight of the turbine. If the combination of groove area and pressure is insufficient, then lifting is neither immediate nor guaranteed. This need not be a significant problem, as the bearings have exhibited adequate performance even in the absence of a hydrostatic lubricant supply. A case study is presented whereby relatively large hydrostatic recesses are added to the pads of thrust bearing. It is demonstrated with the aid of simple numerical modelling that the impact of the recess relative to the original pad is small under normal operating conditions. Most surprising, however, is that significant reductions in average oil film temperature and power dissipation are predicted.

Food safety : maximising impact by understanding the food business context

In Australia there are 5.4 million cases of food-borne illness annually which costs the community $1.2 billion per annum (Department of Health and Ageing 2006). As a co-regulator in food safety, local government has a significant interest in ensuring adherence to good food safety practices. This research project involved focus groups or interviews with food business operators and young food handlers to explore their food safety understanding, attitudes, practices and the organisational culture in which they participated. By its nature qualitative research is not intended to provide definitive generalizable findings. Rather the advantage of a small sample size qualitative study is to provide depth rather than breadth. Thus the findings here provide insight into the complexities and nuances of food safety regulation in a manner which a large scale quantitative study could not.

Development of gas sensing technology for ground and airborne applications powered by solar energy : methodology and experimental results

Monitoring gases for environmental, industrial and agricultural fields is a demanding task that requires long periods of observation, large quantity of sensors, data management, high temporal and spatial resolution, long term stability, recalibration procedures, computational resources, and energy availability. Wireless Sensor Networks (WSNs) and Unmanned Aerial Vehicles (UAVs) are currently representing the best alternative to monitor large, remote, and difficult access areas, as these technologies have the possibility of carrying specialised gas sensing systems, and offer the possibility of geo-located and time stamp samples. However, these technologies are not fully functional for scientific and commercial applications as their development and availability is limited by a number of factors: the cost of sensors required to cover large areas, their stability over long periods, their power consumption, and the weight of the system to be used on small UAVs. Energy availability is a serious challenge when WSN are deployed in remote areas with difficult access to the grid, while small UAVs are limited by the energy in their reservoir tank or batteries. Another important challenge is the management of data produced by the sensor nodes, requiring large amount of resources to be stored, analysed and displayed after long periods of operation. In response to these challenges, this research proposes the following solutions aiming to improve the availability and development of these technologies for gas sensing monitoring: first, the integration of WSNs and UAVs for environmental gas sensing in order to monitor large volumes at ground and aerial levels with a minimum of sensor nodes for an effective 3D monitoring; second, the use of solar energy as a main power source to allow continuous monitoring; and lastly, the creation of a data management platform to store, analyse and share the information with operators and external users. The principal outcomes of this research are the creation of a gas sensing system suitable for monitoring any kind of gas, which has been installed and tested on CH4 and CO2 in a sensor network (WSN) and on a UAV. The use of the same gas sensing system in a WSN and a UAV reduces significantly the complexity and cost of the application as it allows: a) the standardisation of the signal acquisition and data processing, thereby reducing the required computational resources; b) the standardisation of calibration and operational procedures, reducing systematic errors and complexity; c) the reduction of the weight and energy consumption, leading to an improved power management and weight balance in the case of UAVs; d) the simplification of the sensor node architecture, which is easily replicated in all the nodes. I evaluated two different sensor modules by laboratory, bench, and field tests: a non-dispersive infrared module (NDIR) and a metal-oxide resistive nano-sensor module (MOX nano-sensor). The tests revealed advantages and disadvantages of the two modules when used for static nodes at the ground level and mobile nodes on-board a UAV. Commercial NDIR modules for CO2 have been successfully tested and evaluated in the WSN and on board of the UAV. Their advantage is the precision and stability, but their application is limited to a few gases. The advantages of the MOX nano-sensors are the small size, low weight, low power consumption and their sensitivity to a broad range of gases. However, selectivity is still a concern that needs to be addressed with further studies. An electronic board to interface sensors in a large range of resistivity was successfully designed, created and adapted to operate on ground nodes and on-board UAV. The WSN and UAV created were powered with solar energy in order to facilitate outdoor deployment, data collection and continuous monitoring over large and remote volumes. The gas sensing, solar power, transmission and data management systems of the WSN and UAV were fully evaluated by laboratory, bench and field testing. The methodology created to design, developed, integrate and test these systems was extensively described and experimentally validated. The sampling and transmission capabilities of the WSN and UAV were successfully tested in an emulated mission involving the detection and measurement of CO2 concentrations in a field coming from a contaminant source; the data collected during the mission was transmitted in real time to a central node for data analysis and 3D mapping of the target gas. The major outcome of this research is the accomplishment of the first flight mission, never reported before in the literature, of a solar powered UAV equipped with a CO2 sensing system in conjunction with a network of ground sensor nodes for an effective 3D monitoring of the target gas. A data management platform was created using an external internet server, which manages, stores, and shares the data collected in two web pages, showing statistics and static graph images for internal and external users as requested. The system was bench tested with real data produced by the sensor nodes and the architecture of the platform was widely described and illustrated in order to provide guidance and support on how to replicate the system. In conclusion, the overall results of the project provide guidance on how to create a gas sensing system integrating WSNs and UAVs, how to power the system with solar energy and manage the data produced by the sensor nodes. This system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, zoology, and botanical studies opening the way to an ubiquitous low cost environmental monitoring, which may help to decrease our carbon footprint and to improve the health of the planet.

The game of clones and the Australia tax : divergent views about copyright business models and the willingness of Australian consumers to infringe

It is often said that Australia is a world leader in rates of copyright infringement for entertainment goods. In 2012, the hit television show, Game of Thrones, was the most downloaded television show over bitorrent, and estimates suggest that Australians accounted for a plurality of nearly 10% of the 3-4 million downloads each week. The season finale of 2013 was downloaded over a million times within 24 hours of its release, and again Australians were the largest block of illicit downloaders over BitTorrent, despite our relatively small population. This trend has led the former US Ambassador to Australia to implore Australians to stop 'stealing' digital content, and rightsholders to push for increasing sanctions on copyright infringers. The Australian Government is looking to respond by requiring Internet Service Providers to issue warnings and potentially punish consumers who are alleged by industry groups to have infringed copyright. This is the logical next step in deterring infringement, given that the operators of infringing networks (like The Pirate Bay, for example) are out of regulatory reach. This steady ratcheting up of the strength of copyright, however, comes at a significant cost to user privacy and autonomy, and while the decentralisation of enforcement reduces costs, it also reduces the due process safeguards provided by the judicial process. This article presents qualitative evidence that substantiates a common intuition: one of the major reasons that Australians seek out illicit downloads of content like Game of Thrones in such numbers is that it is more difficult to access legitimately in Australia. The geographically segmented way in which copyright is exploited at an international level has given rise to a ‘tyranny of digital distance’, where Australians have less access to copyright goods than consumers in other countries. Compared to consumers in the US and the EU, Australians pay more for digital goods, have less choice in distribution channels, are exposed to substantial delays in access, and are sometimes denied access completely. In this article we focus our analysis on premium film and television offerings, like Game of Thrones, and through semi-structured interviews, explore how choices in distribution impact on the willingness of Australian consumers to seek out infringing copies of copyright material. Game of Thrones provides an excellent case study through which to frame this analysis: it is both one of the least legally accessible television offerings and one of the most downloaded through filesharing networks of recent times. Our analysis shows that at the same time as rightsholder groups, particularly in the film and television industries, are lobbying for stronger laws to counter illicit distribution, the business practices of their member organisations are counter-productively increasing incentives for consumers to infringe. The lack of accessibility and high prices of copyright goods in Australia leads to substantial economic waste. The unmet consumer demand means that Australian consumers are harmed by lower access to information and entertainment goods than consumers in other jurisdictions. The higher rates of infringement that fulfils some of this unmet demand increases enforcement costs for copyright owners and imposes burdens either on our judicial system or on private entities – like ISPs – who may be tasked with enforcing the rights of third parties. Most worryingly, the lack of convenient and cheap legitimate digital distribution channels risks undermining public support for copyright law. Our research shows that consumers blame rightsholders for failing to meet market demand, and this encourages a social norm that infringing copyright, while illegal, is not morally wrongful. The implications are as simple as they are profound: Australia should not take steps to increase the strength of copyright law at this time. The interests of the public and those of rightsholders align better when there is effective competition in distribution channels and consumers can legitimately get access to content. While foreign rightsholders are seeking enhanced protection for their interests, increasing enforcement is likely to increase their ability to engage in lucrative geographical price-discrimination, particularly for premium content. This is only likely to increase the degree to which Australian consumers feel that their interests are not being met and, consequently, to further undermine the legitimacy of copyright law. If consumers are to respect copyright law, increasing sanctions for infringement without enhancing access and competition in legitimate distribution channels could be dangerously counter-productive. We suggest that rightsholders’ best strategy for addressing infringement in Australia at this time is to ensure that Australians can access copyright goods in a timely, affordable, convenient, and fair lawful manner.

The Ash Burner

Growing up with his father in a small coastal town, all Ted knows about his mother is that she died when he was a boy. His father has brought them halfway across the world to start anew, but her absence defines and haunts their lives. When Ted meets Anthony and Claire, an intense friendship begins, carrying them to Sydney and university. They introduce him to poetry and art, and he feels a sense of belonging at last. But as the trio’s friendship deepens over the years, Ted must learn to negotiate the boundaries of love, and come to terms with a legacy of secrets and silence. Written with extraordinary grace and sensitivity, The Ash Burner explores beauty and desire, grief and loss, and the search for one’s true self.

Aggregate Icons/Combat Drag

A series of large-scale photographic collages and videoworks installed in the 2010 The Beauty Of Distance: Songs of Survival in a Precarious Age, Sydney Biennale Cockatoo Island, Sydney (cat.)The work addresses her ongoing interest in feminist strategies for negotiating individual and collective identities, equality,and social activism.

Who really suffers in Michelle Phan’s YouTube copyright case?

The latest case of a popular YouTube blogger being sued for using music by other artists in her videos without permission raises the question of who really benefits from the re-use of music. In a claim filed this month, the electronic dance music label Ultra Records allege that beauty blogger Michelle Phan’s videos infringe their copyrights in nearly 50 cases. Phan is a self-made internet star who began posting makeup and self-help tutorials on YouTube in 2007. She has more than 6.7 million subscribers on her YouTube channel and has made a career from the associated advertising and endorsement revenue, book deal and even her own line of makeup.

Strategic supply chain management factors influencing agribusiness innovation utilization

Purpose – The purpose of this paper is to examine empirically, an industry development paradox, using embryonic literature in the area of strategic supply chain management, together with innovation management literature. This study seeks to understand how, forming strategic supply chain relationships, and developing strategic supply chain capability, influences beneficial supply chain outcomes expected from utilizing industry-led innovation, in the form of electronic business solutions using the internet, in the Australian beef industry. Findings should add valuable insights to both academics and practitioners in the fields of supply chain innovation management and strategic supply chain management, and expand knowledge to current literature. Design/methodology/approach – This is a quantitative study comparing innovative and non-innovative supply chain operatives in the Australian beef industry, through factor analysis and structural equation modeling using PAWS Statistical V18 and AMOS V18 to analyze survey data from 412 respondents from the Australian beef supply chain. Findings – Key findings are that both innovative and non-innovative supply chain operators attribute supply chain synchronization as only a minor indicator of strategic supply chain capability, contrary to the literature; and they also indicate strategic supply chain capability has a minor influence in achieving beneficial outcomes from utilizing industry-led innovation. These results suggest a lack of coordination between supply chain operatives in the industry. They also suggest a lack of understanding of the benefits of developing a strategic supply chain management competence, particularly in relation to innovation agendas, and provides valuable insights as to why an industry paradox exists in terms of the level of investment in industry-led innovation, vs the level of corresponding benefit achieved. Research limitations/implications – Results are not generalized due to the single agribusiness industry studied and the single research method employed. However, this provides opportunity for further agribusiness studies in this area and also studies using alternate methods, such as qualitative, in-depth analysis of these factors and their relationships, which may confirm results or produce different results. Further, this study empirically extends existing theoretical contributions and insights into the roles of strategic supply chain management and innovation management in improving supply chain and ultimately industry performance while providing practical insights to supply chain practitioners in this and other similar agribusiness industries. Practical implications – These findings confirm results from a 2007 research (Ketchen et al., 2007) which suggests supply chain practice and teachings need to take a strategic direction in the twenty-first century. To date, competence in supply chain management has built up from functional and process orientations rather than from a strategic perspective. This study confirms that there is a need for more generalists that can integrate with various disciplines, particularly those who can understand and implement strategic supply chain management. Social implications – Possible social implications accrue through the development of responsible government policy in terms of industry supply chains. Strategic supply chain management and supply chain innovation management have impacts to the social fabric of nations through the sustainability of their industries, especially agribusiness industries which deal with food safety and security. If supply chains are now the competitive weapon of nations then funding innovation and managing their supply chain competitiveness in global markets requires a strategic approach from everyone, not just the industry participants. Originality/value – This is original empirical research, seeking to add value to embryonic and important developing literature concerned with adopting a strategic approach to supply chain management. It also seeks to add to existing literature in the area of innovation management, particularly through greater understanding of the implications of nations developing industry-wide, industry-led innovation agendas, and their ramifications to industry supply chains.

Factors influencing bike share membership : an analysis of Melbourne and Brisbane

The number of bike share programs has increased rapidly in recent years and there are currently over 700 programs in operation globally. Australia’s two bike share programs have been in operation since 2010 and have significantly lower usage rates compared to Europe, North America and China. This study sets out to understand and quantify the factors influencing bike share membership in Australia’s two bike share programs located in Melbourne and Brisbane. An online survey was administered to members of both programs as well as a group with no known association with bike share. A logistic regression model revealed several significant predictors of membership including reactions to mandatory helmet legislation, riding activity over the previous month, and the degree to which convenience motivated private bike riding. In addition, respondents aged 18 - 34 and having docking station within 250m of their workplace were found to be statistically significant predictors of bike share membership. Finally, those with relatively high incomes increased the odds of membership. These results provide insight as to the relative influence of various factors impacting on bike share membership in Australia. The findings may assist bike share operators to maximize membership potential and help achieve the primary goal of bike share – to increase the sustainability of the transport system.

An investigation of problem-solving support and relaxation motivations on e-WOM

As a consequence of greater computer-mediated consumer-to-consumer communication within the firm's marketing communications, there has been a growing need to understand these digital interactions more explicitly. That is, we still know little about the exact extrinsic and intrinsic motivations that drive electronic word-of-mouth. The purpose of the paper is to better understand why members within community-based websites develop a need to exchange and/or develop a social bond within the community. Questionnaire data were gathered from 147 members of an online beauty forum in Australia. The findings highlight that those members seeking problem-solving support in combination with elements of relaxation will be more inclined to exchange with other community members and develop a social bond within that community. Marketing managers can capitalise these findings by strengthening problem-solving support systems and creating environments where community members can also relax and unwind to increase the exchange between members and also increase the social bonds within the community.

Passenger segmentation using smart card data

Transit passenger market segmentation enables transit operators to target different classes of transit users for targeted surveys and various operational and strategic planning improvements. However, the existing market segmentation studies in the literature have been generally done using passenger surveys, which have various limitations. The smart card (SC) data from an automated fare collection system facilitate the understanding of the multiday travel pattern of transit passengers and can be used to segment them into identifiable types of similar behaviors and needs. This paper proposes a comprehensive methodology for passenger segmentation solely using SC data. After reconstructing the travel itineraries from SC transactions, this paper adopts the density-based spatial clustering of application with noise (DBSCAN) algorithm to mine the travel pattern of each SC user. An a priori market segmentation approach then segments transit passengers into four identifiable types. The methodology proposed in this paper assists transit operators to understand their passengers and provides them oriented information and services.

Experiential brand deployment : improving tourism brand evaluations

This article examines the use of an experiential branding process to help leisure resort businesses evaluate their brand. We integrate experiential marketing and the quality function development approach in combination to help understand the brand from the perspectives of both the consumer and firm, to help resort service businesses build their experience-oriented competitive brands. The value of this study is that it provides a real-world brand framework, especially those resorts with limited resources. Much is spoken about the influence of the brand and why it is important, but little is known about decisions related to developing a brand, especially for firms that have limited resources such as resort tourism operators. Tourism operators tend to be small-to-medium enterprises that do not necessarily have the capacity to do everything suggested. Therefore, we explore how firms assess the critical elements of their brand by using an integrated approach. For example, the study finds that, first, by using the quality function development method resorts can identify the most critical brand elements, and second, we identify the associated strengths of each brand element and confirm the identified resort’s critical brand elements for investment. Results show the potential strategies to create a more holistic set of experiences.