The role of other people and emotion for blood donation : an altruistic social service

Blood donation is a critical part of health services with a viable blood supply underpinning an effective health program in any country. Typically blood is provided by voluntary donations from citizens and is therefore reliant on the goodwill and altruistic commitment of donors. In Australia, like many other developed nations, there are many challenges in maintaining a sufficient and sustainable blood supply. The Australian Red Cross Blood Service Donor and Community research group aim is to understand the barriers, motivations and perceptions of donors. Blood donation is a ‘people-processing’ service (Lovelock 1983, Russell-Bennett et al 2013) with the marketing exchange relating to bodily fluid rather than money and is an altruistic social service that has no direct benefit for the customer donor rather the benefit is for other people and society (Kotler and Zaltman 1971). Emotion has been shown to be a motivator and a barrier in a variety of Blood Service studies, this is a key insight that is further explored in the current study. Other key social factors that impact blood donor behavior are classified as social because they involve perceptions of other people’s beliefs and responses (such as moral or subjective norms), peer pressure, other people’s expectations and other people as a form of support. Given that emotions are social phenomena (Parkinson 1996), this study focuses on the role of other people in the blood donation process and how other people relates to the emotional experience of blood donors. We argue in this paper that overcoming emotional barriers to blood donation by leveraging the role of other people will influence low donation rates in Australia. To date, there has been little evidence in service research that identifies. In this paper we explore how other people influence the emotional experience of donors and how, donor emotions create the need for other people as a coping resource.

Australian horror movies and the American market

In Australian cinema since the mid-2000s, horror has become a popular and at times commercially viable genre for low-budget and emerging filmmakers targeting international markets. While the annual horror film output of Australia pales in comparison to that of other Anglophone nations like the United States, Great Britain, and Canada, it has produced several significant titles that have performed moderately well at the international box office, from Wolf Creek (Greg McLean, 2005) to Daybreakers (Michael and Peter Spierig, 2009). Yet as part of a broader tradition of Anglophone horror cinema, many Australian horror movies have been heavily influenced by US and to a lesser extent British horror films. Furthermore, Australian horror film production is largely an internationally-oriented sector that relies on its relationships with overseas distributors and often investors. Consequently, the content and style of Australian horror movies have regularly been tailored for international markets. As a direct consequence some filmmakers have sought to trade on the “Australianness” of their product, others have attempted to pass off their films as faux-American, while others still have attempted to develop placeless films effaced of national reference points. This chapter examines local production as part of a broader tradition of Anglophone horror cinema, the influence of US horror movies, and the limitations of the domestic marketplace. The article concludes with an analysis of how the lure of the US market influences Australian filmmakers’ textual strategies.

Cultural relativity as exchange : J.W. Lindt’s bush character and Aboriginal from The Grafton Album (circa 1872)

J.W.Lindt’s Colonial man and Aborigine image from the GRAFTON ALBUM: “On chemistry and optics all does not depend, art must with these in triple union blend” (text from J.W. Lindt’s photographic backing card)...

Rapid production of a plasmid DNA encoding a malaria vaccine candidate via amino-functionalized poly(GMA-co-EDMA) monolith

Malaria is a global health problem; an effective vaccine is urgently needed. Due to the relative poverty and lack of infrastructure in malaria endemic areas, DNA-based vaccines that are stable at ambient temperatures and easy to formulate have great potential. While attention has been focused mainly on antigen selection, vector design and efficacy assessment, the development of a rapid and commercially viable process to manufacture DNA is generally overlooked. We report here a continuous purification technique employing an optimized stationary adsorbent to allow high-vaccine recovery, low-processing time, and, hence, high-productivity. A 40.0 mL monolithic stationary phase was synthesized and functionalized with amino groups from 2-Chloro-N,N- diethylethylamine hydrochloride for anion-exchange isolation of a plasmid DNA (pDNA) that encodes a malaria vaccine candidate, VR1020-PyMSP4/5. Physical characterization of the monolithic polymer showed a macroporous material with a modal pore diameter of 750 nm. The final vaccine product isolated after 3 min elution was homogeneous supercoiled plasmid with gDNA, RNA and protein levels in keeping with clinical regulatory standards. Toxicological studies of the pVR1020-PyMSP4/5 showed a minimum endotoxin level of 0.28 EU/m.g pDNA. This cost-effective technique is cGMP compatible and highly scalable for the production of DNA-based vaccines in commercial quantities, when such vaccines prove to be effective against malaria. © 2008 American Institute of Chemical Engineers.

Exploration of the fundamental equilibrium behaviour of calcium exchange with weak acid cation resins

This study evaluated the complexity of calcium ion exchange with sodium exchanged weak acid cation resin (DOW MAC-3). Exchange equilibria recorded for a range of different solution normalities revealed profiles which were represented by conventional “L” or “H” type isotherms at low values of equilibrium concentration (Ce) of calcium ions, plus a superimposed region of increasing calcium uptake was observed at high Ce values. The loading of calcium ions was determined to be ca. 53.5 to 58.7 g/kg of resin when modelling only the sorption curve created at low Ce values,which exhibited a well-defined plateau. The calculated calcium ion loading capacity for DOWMAC-3 resin appeared to correlate with the manufacturer's recommendation. The phenomenon of super equivalent ion exchange (SEIX) was observed when the “driving force” for the exchange process was increased in excess of 2.25 mmol calcium ions per gram of resin in the starting solution. This latter event was explained in terms of displacement of sodium ions from sodium hydroxide solution which remained in the resin bead following the initial conversion of the as supplied “H+” exchanged resin sites to the “Na+” version required for softening studies. Evidence for hydrolysis of a small fraction of the sites on the sodium exchanged resin surface was noted. The importance of carefully choosing experimental parameters was discussed especially in relation to application of the Langmuir–Vageler expression. This latter model which compared the ratio of the initial calcium ion concentration in solution to resin mass, versus final equilibrium loading of the calcium ions on the resin; was discovered to be an excellent means of identifying the progress of the calcium–sodium ion exchange process. Moreover, the Langmuir–Vageler model facilitated standardization of various calcium–sodium ion exchange experiments which allowed systematic experimental design.

Equilibrium and column studies of iron exchange with strong acid cation resin

The exchange of iron species from iron (III) chloride solutions with a strong acid cation resin has been investigated in relation to a variety of water and wastewater applications. A detailed equilibrium isotherm analysis was conducted wherein models such as Langmuir Vageler, Competitive Langmuir, Freundlich, Temkin, Dubinin Astakhov, Sips and Brouers-Sotolongo were applied to the experimental data. An important conclusion was that both the bottle-point method and solution normality used to generate the ion exchange equilibrium information influenced which sorption model fitted the isotherm profiles optimally. Invariably, the calculated value for the maximum loading of iron on strong acid cation resin was substantially higher than the value of 47.1 g/kg of resin which would occur if one Fe3+ ion exchanged for three “H+” sites on the resin surface. Consequently, it was suggested that above pH 1, various iron complexes sorbed to the resin in a manner which required less than 3 sites per iron moiety. Column trials suggested that the iron loading was 86.6 g/kg of resin when 1342 mg/L Fe (III) ions in water were flowed at 31.7 bed volumes per hour. Regeneration with 5 to 10 % HCl solutions reclaimed approximately 90 % of exchange sites.

An examination of isotherm generation : impact of bottle-point method upon potassium ion exchange with strong acid cation resin

This paper relates to the importance of impact of the chosen bottle-point method when conducting ion exchange equilibria experiments. As an illustration, potassium ion exchange with strong acid cation resin was investigated due to its relevance to the treatment of various industrial effluents and groundwater. The “constant mass” bottle-point method was shown to be problematic in that depending upon the resin mass used the equilibrium isotherm profiles were different. Indeed, application of common equilibrium isotherm models revealed that the optimal fit could be with either the Freundlich or Temkin equations, depending upon the conditions employed. It could be inferred that the resin surface was heterogeneous in character, but precise conclusions regarding the variation in the heat of sorption were not possible. Estimation of the maximum potassium loading was also inconsistent when employing the “constant mass” method. The “constant concentration” bottle-point method illustrated that the Freundlich model was a good representation of the exchange process. The isotherms recorded were relatively consistent when compared to the “constant mass” approach. Unification of all the equilibrium isotherm data acquired was achieved by use of the Langmuir Vageler expression. The maximum loading of potassium ions was predicted to be at least 116.5 g/kg resin.

Australian stock indexes and the four-factor model

Stock indexes are passive 'value-weighted' portfolios and should not have alphas which are significantly different from zero. If an index produces an insignificant alphan, then significant alphas for equity funds using this index can be attributed solely to manager performance. However, recent literature sugests that US Stock indexes can demonstrate significant alphas, which ultimately raise questions regarding equity fund manager performance in both the US and abroad. in this paper, we employ the Carhart four-factor model and newly available Asian-Pacific risk factors to generate alphas and risk factor loadings for eight Australian stock indexes from January 2004 to December 2012. We ifnd that the initial full sample period analysis does not provide indication of significant alphas in the indexes examined. However, by carrying out 36-month rolling regressions, we discover at least four significant alphas in seven of the eight indexes and factor loading variability. As previously reported in the US, this paper confirms similar issues with the four-factor model using Australian stock indexes and performance benchmarking. In effectively measuring Australian equity fund manager performance, it is therefore essential to evaluate a fund's alpha and risk factors relative to the alpha and risk factors of the appropriate benchmark index.

Trial by media: An empirical investigation of corporate reputation and stock returns in Australia

This article examines whether investors are able to generate abnormal risk-adjusted returns in the Australian market based on media-specific firm reputational factors under market uncertainty between 2004 and 2012. The findings suggest that after controlling for crisis-centric time periods and market risk factors, contrarian trading strategies produce abnormal returns for poor corporate reputation firms but not for their good corporate reputation counterparts. Corporate reputation may be a driver of performance for poorly performing Australian firms and could be considered a stimulus for trading activity due to its explanatory capabilities.

Estimates of lost material stock of buildings and roads due to the great east Japan earthquake and tsunami

This article describes research conducted for the Japanese government in the wake of the magnitude 9.0 earthquake and tsunami that struck eastern Japan on March 11, 2011. In this study, material stock analysis (MSA) is used to examine the losses of building and infrastructure materials after this disaster. Estimates of the magnitude of material stock that has lost its social function as a result of a disaster can indicate the quantities required for reconstruction, help garner a better understanding of the volumes of waste flows generated by that disaster, and also help in the course of policy deliberations in the recovery of disaster-stricken areas. Calculations of the lost building and road materials in the five prefectures most affected were undertaken. Analysis in this study is based on the use of geographical information systems (GIS) databases and statistics; it aims to (1) describe in spatial terms what construction materials were lost, (2) estimate the amount of infrastructure material needed to rehabilitate disaster areas, and (3) indicate the amount of lost material stock that should be taken into consideration during government policy deliberations. Our analysis concludes that the material stock losses of buildings and road infrastructure are 31.8 and 2.1 million tonnes, respectively. This research approach and the use of spatial MSA can be useful for urban planners and may also convey more appropriate information about disposal based on the work of municipalities in disaster-afflicted areas.

Hydraulic conductivity increases in a sodic clay soil in response to gypsum applications impacts of bulk density and cation exchange

Amelioration of sodic soils is commonly achieved by applying gypsum, which increases soil hydraulic conductivity by altering soil chemistry. The magnitude of hydraulic conductivity increases expected in response to gypsum applications depends on soil properties including clay content, clay mineralogy, and bulk density. The soil analyzed in this study was a kaolinite rich sodic clay soil from an irrigated area of the Lower Burdekin coastal floodplain in tropical North Queensland, Australia. The impact of gypsum amelioration was investigated by continuously leaching soil columns with a saturated gypsum solution, until the hydraulic conductivity and leachate chemistry stabilized. Extended leaching enabled the full impacts of electrolyte effects and cation exchange to be determined. For the columns packed to 1.4 g/cm3, exchangeable sodium concentrations were reduced from 5.0 ± 0.5 mEq/100 g to 0.41 ± 0.06 mEq/100 g, exchangeable magnesium concentrations were reduced from 13.9 ± 0.3 mEq/100 g to 4.3 ± 2.12 mEq/100 g, and hydraulic conductivity increased to 0.15 ± 0.04 cm/d. For the columns packed to 1.3 g/cm3, exchangeable sodium concentrations were reduced from 5.0 ± 0.5 mEq/100 g to 0.51 ± 0.03 mEq/100 g, exchangeable magnesium concentrations were reduced from 13.9 ± 0.3 mEq/100 g to 0.55 ± 0.36 mEq/100 g, and hydraulic conductivity increased to 0.96 ± 0.53 cm/d. The results of this study highlight that both sodium and magnesium need to be taken into account when determining the suitability of water quality for irrigation of sodic soils and that soil bulk density plays a major role in controlling the extent of reclamation that can be achieved using gypsum applications.