The contribution of three components of nutrition knowledge to socio-economic differences in food purchasing choices

Objectives: To assess socio-economic differences in three components of nutrition knowledge, i.e. knowledge of (i) the relationship between diet and disease, (ii) the nutrient content of foods and (iii) dietary guideline recommendations; furthermore, to determine if socio-economic differences in nutrition knowledge contribute to inequalities in food purchasing choices. Design: The cross-sectional study considered household food purchasing,nutrition knowledge, socio-economic and demographic information. Household food purchasing choices were summarised by three indices, based on self-reported purchasing of sixteen groceries, nineteen fruits and twenty-one vegetables. Socio-economic position (SEP) was measured by household income and education. Associations between SEP, nutrition knowledge and food purchasing were examined using general linear models adjusted for age, gender, household type and household size. Setting: Brisbane, Australia in 2000. Subjects: Main household food shoppers (n 1003, response rate 66?4 %), located in fifty small areas (Census Collectors Districts). Results: Shoppers in households of low SEP made food purchasing choices that were less consistent with dietary guideline recommendations: they were more likely to purchase grocery foods comparatively higher in salt, sugar and fat, and lower in fibre, and they purchased a narrower range of fruits and vegetables. Those of higher SEP had greater nutrition knowledge and this factor attenuated most associations between SEP and food purchasing choices. Among nutrition knowledge factors, knowledge of the relationship between diet and disease made the greatest and most consistent contribution to explaining socio-economic differences in food purchasing. Conclusions: Addressing inequalities in nutrition knowledge is likely to reduce socio-economic differences in compliance with dietary guidelines. Improving knowledge of the relationship between diet and disease appears to be a particularly relevant focus for health promotion aimed to reduce socio-economic differences in diet and related health inequalities.

An Investigation into the Options for Increasing the Extent of Energy Efficiency Knowledge and Skills in Engineering Education

Society is increasingly calling for professionals across government, industry, business and civil society to be able to problem-solve issues related to climate change and sustainable development as part of their work. In particular there is an emerging realisation of the fundamental need to swiftly reduce the growing demand for energy across society, and to then meet the demand with low emissions options. A key ingredient to addressing such issues is equipping professionals with emerging knowledge and skills to address energy challenges in all aspects of their work. The Council of Australian Governments has recognised this need, signing the National Partnership Agreement on Energy Efficiency in July 2009, which included a commitment to assist business and industry obtain the knowledge, skills and capacity to pursue cost-effective energy efficiency opportunities.2 Engineering will play a critical part among the professions, with Engineers Australia acknowledging that, ‘The need to make changes in the way energy is used and supplied throughout the world represents the greatest challenge to engineers in moving toward sustainability.’

The WIL (Work Integrated Learning) Report : A national scoping study [Australian Learning and Teaching Council (ALTC) Final report]

This report provides an account of the first large-scale scoping study of work integrated learning (WIL) in contemporary Australian higher education. The explicit aim of the project was to identify issues and map a broad and growing picture of WIL across Australia and to identify ways of improving the student learning experience in relation to WIL. The project was undertaken in response to high levels of interest in WIL, which is seen by universities both as a valid pedagogy and as a means to respond to demands by employers for work-ready graduates, and demands by students for employable knowledge and skills. Over a period of eight months of rapid data collection, 35 universities and almost 600 participants contributed to the project. Participants consistently reported the positive benefits of WIL and provided evidence of commitment and innovative practice in relation to enhancing student learning experiences. Participants provided evidence of strong partnerships between stakeholders and highlighted the importance of these relationships in facilitating effective learning outcomes for students. They also identified a range of issues and challenges that face the sector in growing WIL opportunities; these issues and challenges will shape the quality of WIL experiences. While the majority of comments focused on issues involved in ensuring quality placements, it was recognised that placements are just one way to ensure the integration of work with learning. Also, the WIL experience is highly contextualised and impacted by the expectations of students, employers, the professions, the university and government policy.

Shared values : diverse perspectives – engaging engineering educators in integrating Indigenous engineering knowledge into current curricula

BACKGROUND Engineering is a problem-based practically oriented discipline, whose practitioners aim to find effective solutions to engineering challenges, technically and economically. Engineering educators operate within a mandate to ensure that graduate engineers understand the practicalities and realities of good engineering practice. While this is a vital goal for the discipline, emerging influences are challenging the focus on ‘hard practicalities’ and requiring recognition of the cultural and social aspects of engineering. Expecting graduate engineers to possess communication skills essential for negotiating satisfactory outcomes in contexts of complex social beliefs about the impact of their work can be an unsettling and challenging prospect for engineering educators. This project identifies and addresses Indigenous engineering practices and principles, and their relevance to future engineering practices. PURPOSE This Office of Learning and Teaching (OLT) project proposes that what is known/discoverable about indigenous engineering knowledge and practices must be integrated into engineering curricula. This is an important aspect of ensuring that engineering as a profession responds competently to increasing demands for socially and environmentally responsible activity across all aspects of engineering activity. DESIGN/METHOD The project addresses i) means for appropriate inclusion of Indigenous students into usual teaching activities ii) assuring engineering educators have access to knowledge of Indigenous practices and skills relevant to particular engineering courses and topics iii) means for preparing all students to negotiate their way through issues of indigenous relationships with the land where engineering projects are planned. The project is undertaking wide-ranging research to collate knowledge about indigenous engineering principles and practices and develop relevant resource materials. RESULTS It is common to hear that such social issues as ‘Indigenous concerns’ are only of concern to environmental engineers. We challenge that perspective, and make the case that Indigenous knowledge is an important issue for all engineering educators in relation to effective integration of indigenous students and preparation of all engineering graduates to engage with indigenous communities. At the time of first contact, a rich and varied, technically literate, Indigenous social framework possessed knowledge of the environment that is not yet fully acknowledged in Australian society. A core outcome of the work will be development of resources relating to Indigenous engineering practices for inclusion in engineering core curricula. CONCLUSIONS A large body of technical knowledge was needed to survive and sustain human society in the complex environment that was Australia before 1788. This project is developing resource materials, and supporting documentation, about that knowledge to enable engineering educators to more easily integrate it into current curricula. The project also aims to demonstrate the importance for graduating engineers to appreciate the existence of diverse perspectives on engineering tasks and learn how to value - and employ - multiple paths to possible solutions.

Mapping geographical knowledge and skills needed for pre-service teachers in teacher education

In Australia, for more than two decades, a ‘social science’ integrated framework was the favoured approach for delivering subjects such as history and geography. However, such interdisciplinary approaches have continued to attract criticism from various parts of the academic and public spheres and since 2009, a return to teaching the disciplines has been heralded as the ‘new’ way forward. Using discourse analysis techniques associated with Foucauldian archaeology, the purpose of this paper is to examine the Australian Curriculum: Geography document to ascertain the discourses necessary for pre-service teachers to enact effective teaching of geography in a primary setting. Then, based on pre-service teachers’ online survey responses, the paper investigates if such future teachers have the knowledge and skills to interpret, deliver and enact the new geography curriculum in primary classrooms. Finally, as teacher educators, our interest lies in preparing pre-service teachers effectively for the classroom so the findings are used to inform the content of a teacher education course for pre-service primary teachers.

Reflection on the SIA Ltd professional project and the body of knowledge

In the last five years the Safety Institute of Australia Limited (SIA) has developed and implemented a number of strategies to gain professional recognition for the ‘generalist occupational health and safety (OHS) professional’ in Australia and internationally. Despite a considerable amount of work by the SIA aimed at gaining professional status, there does not appear to have been any published debate or reflection about how the drive for professionalism (the ‘professional project’) will contribute to the prevention of occupational disease and injury. Professionalisation has been promoted as a sign of maturity for the SIA and as an unquestionably good outcome, as it has been assumed that professionalisation will provide unmitigated benefits for workplace health and safety. The aim of this paper is to critically reflect on the processes of professionalisation (the professional project) and discuss the ways in which this project may shape the field of occupational health and safety.

The "virtuous circle": A case study examining the case for better embedding of Work Integrated Learning approaches into university journalism cirriculums

This paper explores the potential to focus and develop the approach to Work Integrated Learning (WIL)in journalism courses where this method is seen as a core principal of the program. It argues that, in many cases, such approaches are ill-defined and underdeveloped, a fact that weakens the possibility for strong course outcomes. It then examines the particular case of QUT coverage of the 2014 G20 Leader's summit to illustrate how an all-of-course WIL approach to G20 coverage-coupled with a tailored interaction with the library-might provide an enhanced student experience as well as unlock the potential for greater knowledge transfer between university journalism courses and industry partners.

Practices and knowledge levels of prehospital doctors in traumatic brain injury management in Hubei, China

This thesis is a cross-sectional questionnaire survey of pre-hospital doctors' knowledge and practice of managing traumatic brain injury in two major cities of Hubei province, China. This study provides evidence for future research on improving the quality of pre-hospital management in China.

Knowledge unlatched: A global library consortium model for funding open access scholarly books: Full report on the Proof of Concept Pilot 2014

This special issue of Cultural Science Journal is devoted to the report of a groundbreaking experiment in re-coordinating global markets for specialist scholarly books and enabling the knowledge commons: the Knowledge Unlatched proof-of-concept pilot. The pilot took place between January 2012 and September 2014. It involved libraries, publishers, authors, readers and research funders in the process of developing and testing a global library consortium model for supporting Open Access books. The experiment established that authors, librarians, publishers and research funding agencies can work together in powerful new ways to enable open access; that doing so is cost effective; and that a global library consortium model has the potential dramatically to widen access to the knowledge and ideas contained in book-length scholarly works.

Preparing engineering graduates for the knowledge economy through blended delivery of mathematics

Contemporary higher education institutions are making significant efforts to develop cohesive, meaningful and effective learning experiences for Science, Technology, Engineering and Mathematics (STEM) curricula to prepare graduates for challenges in the modern knowledge economy, thus enhancing their employability (Carnevale et al, 2011). This can inspire innovative redesign of learning experiences embedded in technology-enhanced educational environments and the development of research-informed, pedagogically reliable strategies fostering interactions between various agents of the learning-teaching process. This paper reports on the results of a project aimed at enhancing students’ learning experiences by redesigning a large, first year mathematics unit for Engineering students at a large metropolitan public university. Within the project, the current study investigates the effectiveness of selected, technology-mediated pedagogical approaches used over three semesters. Grounded in user-centred instructional design, the pedagogical approaches explored the opportunities for learning created by designing an environment containing technological, social and educational affordances. A qualitative analysis of mixed-type questionnaires distributed to students indicated important inter-relations between participants’ frames of references of the learning-teaching process and stressed the importance (and difficulty) of creating appropriate functional context. Conclusions drawn from this study may inform instructional design for blended delivery of STEM-focused programs that endeavor to enhance students’ employability by educating work-ready graduates.

Exploring links between pedagogical knowledge practices and student outcomes in STEM education for primary schools

Science, technology, engineering, and mathematics (STEM) education is an emerging initiative in Australia, particularly in primary schools. This qualitative research aimed to understand Year 4 students' involvement in an integrated STEM education unit that focused on science concepts (e.g., states of matter, testing properties of materials) and mathematics concepts (e.g., 3D shapes and metric measurements) for designing, making and testing a strong and safe medical kit to insulate medicines (ice cubes) at desirable temperatures. Data collection tools included student work samples, photographs, written responses from students and the teacher, and researcher notes. In a post-hoc analysis, a pedagogical knowledge practice framework (i.e., planning, timetabling, preparation, teaching strategies, content knowledge, problem solving, classroom management, questioning, implementation, assessment, and viewpoints) was used to explain links to student outcomes in STEM education. The study showed how pedagogical knowledge practices may be linked to student outcomes (knowledge, understanding, skill development, and values and attitudes) for a STEM education activity.

A new public health context to understand male sex work

Background Researching male sex work offers insight into the sexual lives of men and women while developing a more realistic appreciation for the changing issues associated with male sex work. This type of research is important because it not only reflects a growing and diversifying consumer demand for male sex work, but also because it enables the construction of knowledge that is up-to-date with changing ideas around sex and sexualities. Discussion This paper discusses a range of issues emerging in the male sex industry. Notably, globalisation and technology have contributed to the normalisation of male sex work and reshaped the landscape in which the male sex industry operates. As part of this discussion, we review STI and HIV rates among male sex workers at a global level, which are widely disparate and geographically contextual, with rates of HIV among male sex workers ranging from 0% in some areas to 50% in others. The Internet has reshaped the way that male sex workers and clients connect and has been identified as a useful space for safer sex messages and research that seeks out hidden or commonly excluded populations. Future directions We argue for a public health context that recognises the emerging and changing nature of male sex work, which means programs and policies that are appropriate for this population group. Online communities relating to male sex work are important avenues for safer sexual messages and unique opportunities to reach often excluded sub-populations of both clients and male sex workers. The changing structure and organisation of male sex work alongside rapidly changing cultural, academic and medical discourses provide new insight but also new challenges to how we conceive the sexualities of men and male sex workers. Public health initiatives must reflect upon and incorporate this knowledge.

Managing knowledge to promote sustainability in Australian transport infrastructure projects

To deliver tangible sustainability outcomes, the infrastructure sector of the construction industry needs to build capacities for the creation, application and management of ever increasing knowledge. This paper intends to establish the importance and key issues of promoting sustainability through knowledge management (KM). It presents a new conceptual framework for managing sustainability knowledge to raise the awareness and direct future research in the field of transport infrastructure, one of the fast growing sectors in Australia. A holistic KM approach is adopted in this research to consider the potential to “deliver the right information to the right person at the right time” in the context of sustainable development of infrastructure. A questionnaire survey among practitioners across the nation confirmed the necessity and identified priority issues of managing knowledge for sustainability. During infrastructure development, KM can help build much needed industry consensus, develop capacity, communicate decisions, and promote specific measures for the pursuit of sustainability. Six essential elements of the KM approach and their priority issues informed the establishment of a conceptual KM framework. The transport infrastructure sector has come to realise that development must not come at the expense of environmental and social objectives. In practice however, it is facing extensive challenges to deliver what has been promised in the sustainability agenda. This research demonstrates the importance of managing sustainability knowledge, integration of various stakeholders, facilitation of plans and actions and delivery of tangible benefits in real projects, as a positive step towards meeting these challenges.

Knowledge, identity, and dilemmas of the self in physical education teacher education

This study draws on an eclectic range of influences. The early research was guided by the traditions of Personal Construct Theory. The study was later extended by drawing on theoretical tenets of social constructionism and the notion of the Saturated Self and Anthony Gidden's work on structuration and his later work on self identity. This has provided a new way of investigating how becoming a PE teacher through constructed knowledge established a professional identity. The data suggest that during the process of constructing professional knowledge, the students forge their identities by establishing 'position' and 'role'. In doing so, the participants in this study experienced a series of dilemmas of professional self. These dilemmas are a product of what Giddens calls high modernity and what Gergen refers to as postmodernity. It seems that to become a PE teacher, the dilemmas must be worked through until a position of ontological security has been achieved. For some this was profoundly difficult. In spite of this, the methods of study allowed the participants to begin to articulate their theories and visions of teaching physical education, and the therapeutic qualities of Kelly's theory encouraged many of the students to 'see it differently' (Rossi, 1997) and to begin to develop a rationale for professional work in physical education based on socially just practices.

External knowledge and query strategies in active learning: A study in clinical information extraction

This paper presents a new active learning query strategy for information extraction, called Domain Knowledge Informativeness (DKI). Active learning is often used to reduce the amount of annotation effort required to obtain training data for machine learning algorithms. A key component of an active learning approach is the query strategy, which is used to iteratively select samples for annotation. Knowledge resources have been used in information extraction as a means to derive additional features for sample representation. DKI is, however, the first query strategy that exploits such resources to inform sample selection. To evaluate the merits of DKI, in particular with respect to the reduction in annotation effort that the new query strategy allows to achieve, we conduct a comprehensive empirical comparison of active learning query strategies for information extraction within the clinical domain. The clinical domain was chosen for this work because of the availability of extensive structured knowledge resources which have often been exploited for feature generation. In addition, the clinical domain offers a compelling use case for active learning because of the necessary high costs and hurdles associated with obtaining annotations in this domain. Our experimental findings demonstrated that 1) amongst existing query strategies, the ones based on the classification model’s confidence are a better choice for clinical data as they perform equally well with a much lighter computational load, and 2) significant reductions in annotation effort are achievable by exploiting knowledge resources within active learning query strategies, with up to 14% less tokens and concepts to manually annotate than with state-of-the-art query strategies.