Emerging water treatment technologies for decentralised systems : an overview of selected systems suited for application in towns and settlements in remote and very remote regions of Australia and vulnerable and lagging rural regions in Sri Lanka

The primary purpose of this paper is to overview a selection of advanced water treatment technology systems that are suited for application in towns and settlements in remote and very remote regions of Australia and vulnerable and lagging rural regions in Sri Lanka. This recognises that sanitation and water treatment are inextricably linked and both are needed to reduce risks to environment and population health from contaminated water sources. For both Australia and Sri Lanka only a small fraction of the settlements in rural and remote regions are connected to water treatment facilities and town water supplies. In Australia’s remote/very remote regions raw water is drawn from underground sources and rainwater capture. Most settlements in rural Sri Lanka rely on rivers, reservoirs, wells, springs or carted water. Furthermore, Sri Lanka has more than 25,000 hand pumped tube wells which saved the communities during recent droughts. Decentralised water supply systems offer the opportunity to provide safe drinking water to these remote/very remote and rural regions where centralised systems are not feasible due to socio-cultural, economic, political, technological reasons. These systems reduce health risks from contaminated water supplies. In remote areas centralized systems fail due to low population density and less affordability. Globally, a new generation of advanced water treatment technologies are positioned to make a major impact on the provision of safe potable water in remote/very remote regions in Australia and rural regions in Sri Lanka. Some of these systems were developed for higher income countries. However, with careful selection and further research they can be tailored to match local socio-economic conditions and technical capacity. As such, they can equally be used to provide decentralised water supply in communities in developed and developing countries such as Australia and Sri Lanka.

Green: Exploring the aestheticized use of chroma-key techniques and technologies in two intermedial productions

Peggy Shaw’s RUFF, (USA 2013) and Queensland Theatre Company’s collaboration with Queensland University of Technology, Total Dik!, (Australia 2013) overtly and evocatively draw on an aestheticized use of the cinematic techniques and technologies of Chroma Key to reveal the tensions in their production and add layers to their performances. In doing so they offer invaluable insight where the filmic and theatrical approaches overlap. This paper draws on Eckersall, Grehan and Scheer’s New Media Dramaturgy (2014) to reposition the frame as a contribution to intermedial theatre and performance practices in light of increasing convergence between seemingly disparate discourses. In RUFF, the scenic environment replicates a chroma-key ‘studio’ which facilitates the reconstruction of memory displaced after a stroke. RUFF uses the screen and projections to recall crooners, lounge singers, movie stars, rock and roll bands, and an eclectic line of eccentric family members living inside Shaw. While the show pays tribute to those who have kept her company across decades of theatrical performance, use of non-composited chroma-key technique as a theatrical device and the work’s taciturn revelation of the production process during performance, play a central role in its exploration of the juxtaposition between its reconstructed form and content. In contrast Total Dik! uses real-time green screen compositing during performance as a scenic device. Actors manipulate scale models, refocus cameras and generate scenes within scenes in the construction of the work’s examination of an isolated Dictator. The ‘studio’ is again replicated as a site for (re)construction, only in this case Total Dik! actively seeks to reveal the process of production as the performance plays out. Building on RUFF, and other works such as By the Way, Meet Vera Stark, (2012) and Hotel Modern’s God’s Beard (2012), this work blends a convergence of mobile technologies, models, and green screen capture to explore aspects of transmedia storytelling in a theatrical environment (Jenkins, 2009, 2013). When a green screen is placed on stage, it reads at once as metaphor and challenge to the language of theatre. It becomes, or rather acts, as a ‘sign’ that alludes to the nature of the reconstructed, recomposited, manipulated and controlled. In RUFF and in Total Dik!, it is also a place where as a mode of production and subsequent reveal, it adds weight to performance. These works are informed by Auslander (1999) and Giesenkam (2007) and speak to and echo Lehmann’s Postdramatic Theatre (2006). This paper’s consideration of the integration of studio technique and live performance as a dynamic approach to multi-layered theatrical production develops our understanding of their combinatory use in a live performance environment.

Submission for the Queensland Government Parliamentary Inquiry into personal health promotion interventions using telephone and web-based technologies

Telephone and web-based technologies such as SMS, smartphone apps, gamification, online/mobile games, online quizzes and tools can be used in personal health interventions in two ways: health promotion or social marketing. In response to the Queensland government's call for submissions to the parliamentary inquiry, a social marketing and design submission from four of the faculties at Queensland University of Technology was submitted. There appears to be a great deal of confusion in government circles about the terms ‘social marketing’ and ‘health promotion’ and often they are used interchangeably when they are actually significantly different approaches. Social marketing is the science and practice of behaviour change and involves goods and services that offer a value proposition, and which incentivises citizens to change their behaviour voluntarily. However, social marketing is often mistakenly used to describe advertising and communication or social media marketing. This submission contains an overview of how technology interventions need to be implemented to be successful, provides examples of the evidence that telephone and web-based interventions can effectively influence public health outcome. This submission poses seven critical factors.

Cross cultural similarities in using mobile technologies to engage and connect with students

The access to mobile technologies is growing at an exponential rate in developed and developing countries, with some developing countries surpassing developed countries in terms of device ownership. It is both the demand for, and high usage of mobile technologies that have driven new and emerging pedagogical practices in higher education. These technologies have also exponentially increased access to information in a knowledge economy. While differences are often drawn between developing and developed countries in terms of the access and use of information and communication technologies (ICT), this paper will report on a study detailing how higher education students use mobile technologies and social media in their studies and in their personal lives. It will contrast the similarities in how students from an Australian and Vietnamese university access and use mobile and social media technologies while also highlighting ways in which these technologies can be embraced by academics to connect and engage with students.

A simulator evaluation of effects of assistive technologies on driver cognitive load at railway level crossings

Intelligent Transport Systems (ITS) have the potential to substantially reduce the number of crashes caused by human errors at railway levels crossings. However, such systems could overwhelm drivers, generate different types of driver errors and have negative effects on safety at level crossing. The literature shows an increasing interest for new ITS for increasing driver situational awareness at level crossings, as well as evaluations of such new systems on compliance. To our knowledge, the potential negative effects of such technologies have not been comprehensively evaluated yet. This study aimed at assessing the effect of different ITS interventions, designed to enhance driver behaviour at railway crossings, on driver’s cognitive loads. Fifty eight participants took part in a driving simulator study in which three ITS devices were tested: an in-vehicle visual ITS, an in-vehicle audio ITS, and an on-road valet system. Driver cognitive load was objectively and subjectively assessed for each ITS intervention. Objective data were collected from a heart rate monitor and an eye tracker, while subjective data was collected with the NASA-TLX questionnaire. Overall, results indicated that the three trialled technologies did not result in significant changes in cognitive load while approaching crossings.

Additive tissue manufacturing for breast reconstruction: Combining CAD/CAM with adipose tissue engineering

The primary aim of this multidisciplinary project was to develop a new generation of breast implants. Disrupting the currently prevailing paradigm of silicone implants which permanently introduce a foreign body into mastectomy patients, highly porous implants developed as part of this PhD project are biodegradable by the body and augment the growth of natural tissue. Our technology platform leverages computer-assisted-design which allows us to manufacture fully patient-specific implants based on a personalised medicine approach. Multiple animal studies conducted in this project have shown that the polymeric implant slowly degrades within the body harmlessly while the body's own tissue forms concurrently.

Environmental technologies, intellectual property and climate change (2013) edited by Abbe Brown

Abbe Brown from the University of Aberdeen, Scotland, is one of the leading international researchers on intellectual property and climate change. She is an intellectual dynamo. Her work brings together a mastery of intellectual property, with a strong interest in innovation theory and practice, and an engagement with public policy issues surrounding human rights, competition policy, and access to knowledge. Abbe Brown has shown a particular aptitude for tackling big ideas and wicked global problems, with intelligence, gusto, insight, and formidable wisdom.

Adoption dynamics of increasing-return technologies in systemic contexts

Many systemic, complex technologies have been suggested to exhibit increasing returns to adoption, whereby the initial increase in adoption leads to increasing experience with the technology, which drives technological improvements and use, subsequently leading to further adoption. In addition, in the systemic context, mimetic behavior may lend support to increasing returns as technology adoption is witnessed among other agents in the systemic context. Finally, inter-dependencies in the systemic context also sensitize the adoption behavior to fundamental changes in technology provisioning, and this may lend support for the increasing returns type of dynamics in adoption. Our empirical study examines the dynamics of organizational technology adoption when technology is provisioned by organizations in another sub-system in a systemic context. We hypothesize that innovation, imitation, and technological change effects are present in creating increasing returns in the systemic context. Our empirical setting considers 24 technologies represented by 2282 data points in the computer industry. Our results provide support for our prediction that imitation effects are present in creating increasing returns to adoption. We further discuss the managerial and research implications of our results.

Multi-site study of additive genetic effects on fractional anisotropy of cerebral white matter: Comparing meta and megaanalytical approaches for data pooling

Combining datasets across independent studies can boost statistical power by increasing the numbers of observations and can achieve more accurate estimates of effect sizes. This is especially important for genetic studies where a large number of observations are required to obtain sufficient power to detect and replicate genetic effects. There is a need to develop and evaluate methods for joint-analytical analyses of rich datasets collected in imaging genetics studies. The ENIGMA-DTI consortium is developing and evaluating approaches for obtaining pooled estimates of heritability through meta-and mega-genetic analytical approaches, to estimate the general additive genetic contributions to the intersubject variance in fractional anisotropy (FA) measured from diffusion tensor imaging (DTI). We used the ENIGMA-DTI data harmonization protocol for uniform processing of DTI data from multiple sites. We evaluated this protocol in five family-based cohorts providing data from a total of 2248 children and adults (ages: 9-85) collected with various imaging protocols. We used the imaging genetics analysis tool, SOLAR-Eclipse, to combine twin and family data from Dutch, Australian and Mexican-American cohorts into one large "mega-family". We showed that heritability estimates may vary from one cohort to another. We used two meta-analytical (the sample-size and standard-error weighted) approaches and a mega-genetic analysis to calculate heritability estimates across-population. We performed leave-one-out analysis of the joint estimates of heritability, removing a different cohort each time to understand the estimate variability. Overall, meta- and mega-genetic analyses of heritability produced robust estimates of heritability.

Intellectual property and climate change: Inventing clean technologies

In the wake of the international summits in Copenhagen and Cancún, there is an urgent need to consider the role of intellectual property law in encouraging research, development, and diffusion of clean technologies to mitigate and adapt to the effects of climate change. This book charts the patent landscapes and legal conflicts emerging in a range of fields of innovation – including renewable forms of energy, such as solar power, wind power, and geothermal energy; as well as biofuels, green chemistry, green vehicles, energy efficiency, and smart grids. As well as reviewing key international treaties, this book provides a detailed analysis of current trends in patent policy and administration in key nation states, and offers clear recommendations for law reform. It considers such options as technology transfer, compulsory licensing, public sector licensing, and patent pools; and analyses the development of Climate Innovation Centres, the Eco-Patent Commons, and environmental prizes, such as the L-Prize, the H-Prize, and the X-Prizes. This book will have particular appeal to policy-makers given its focus upon recent legislative developments and reform proposals, as well as legal practitioners by developing a better understanding of recent legal, scientific, and business developments, and how they affect their practice. Innovators, scientists and researchers will also benefit from reading this book.

Intellectual property and emerging technologies: The new biology

This unique and comprehensive collection investigates the challenges posed to intellectual property by recent paradigm shifts in biology. It explores the legal ramifications of emerging technologies, such as genomics, synthetic biology, stem cell research, nanotechnology, and biodiscovery. Extensive contributions examine recent controversial court decisions in patent law – such as Bilski v. Kappos, and the litigation over Myriad’s patents in respect of BRCA1 and BRCA2 – while other papers explore sui generis fields, such as access to genetic resources, plant breeders' rights, and traditional knowledge. The collection considers the potential and the risks of the new biology for global challenges – such as access to health-care, the protection of the environment and biodiversity, climate change, and food security. It also considers Big Science projects – such as biobanks, the 1000 Genomes Project, and the Doomsday Vault. The inter-disciplinary research brings together the work of scholars from Australia, Canada, Europe, the UK and the US and involves not only legal analysis of case law and policy developments, but also historical, comparative, sociological, and ethical methodologies. Intellectual Property and Emerging Technologies will appeal to policy-makers, legal practitioners, business managers, inventors, scientists and researchers.

Re-theorizing the “digital divide”: Identifying dimensions of social exclusion in contemporary media technologies

The digital divide is the disparancy in access to information, in the ability to communicate, and in the capacity to make information and communication serve full participation in the information society. Indeed, the conversation about the digital divide has developed over the last decade from a focus on connectivity and access to information and communication technologies, to a conversation that encompasses the ability to use them and to the utility that usage provides (Wei et al., 2011). However, this conversation, while transitioning from technology to the skills of the people that use them and to the fruits of their use is limited in its ability to take into account the social role of information and communication technologies (ICTs). One successful attempt in conceptualizing the social impact of the differences in access to and utilization of digital communication technologies, was developed by van Dijk (2005) whose sequential model for analyzing the divide states that: 1. Categorical inequalities in society produce an unequal distribution of resources; 2. An unequal distribution of resources causes unequal access to digital technologies; 3. Unequal access to digital technologies also depends on the characteristics of these technologies; 4. Unequal access to digital technologies brings about unequal participation in society; 5. Unequal participation in society reinforces categorical inequalities and unequal distributions of resources.” (p. 15) As van Dijk’s model demonstrates, the divide’s impact is the exclusion of individuals from participation. Still left to be defined are the “categorical inequalities,” the “resources,” the “characteristics of digital technologies,” and the different levels of “access” that result in differentiated levels of participation, as these change over time due to the evolving nature of technology and the dynamics of society. And most importantly, the meaning of “participation” in contemporary society needs to be determined as it is differentiated levels of participation that are the result of the divide and the engine of the ever-growing disparities. Our argument is structured in the following manner: We first claim that contemporary digital media differ from the previous generation of ICTs along four dimensions: They offer an abundance of information resources and communication channels when compared to the relative paucity of both in the past; they offer mobility as opposed to the stationary nature of their predecessors; they are interactive in that they provide users with the capability to design their own media environments in contrast to the dictated environs of previous architectures; and, they allow users to communicate utilizing multi forms of mediation, unlike the uniformity of sound or word that limited users in the past. We then submit that involvement in the information society calls for egalitarian access to all four dimensions of the user experience that make contemporary media different from their predecessors and that the ability to experience all four affects the levels in which humans partake in the shaping of society. The model being cyclical, we then discuss how lower levels of participation contribute to the enhancement of social inequalities. Finally, we discuss why participation is needed in order to achieve full membership in the information society and what political philosophy should govern policy solutions targeting the re-inclusion of those digitally excluded.

Storytelling and new media technologies: Investigating the potential of the ABC's Heywire for regional youth

This thesis investigates an instance of audience participation within the Australian public service media institution, the ABC. The case study for this research – the ABC’s ‘Heywire’ project – is a regional youth storytelling project, an online platform, and an example of the potentials as well as the limitations of personal narrative and digital technologies for incorporating the voices and self-representations of audiences. By investigating 'Heywire', this thesis illuminates the exciting opportunities and also some profound challenges that arise when public service media institutions invite their audiences to participate as content creators and storytellers.

Advances in solid-catalytic and non-catalytic technologies for biodiesel production

The insecure supply of fossil fuel coerces the scientific society to keep a vision to boost investments in the renewable energy sector. Among the many renewable fuels currently available around the world, biodiesel offers an immediate impact in our energy. In fact, a huge interest in related research indicates a promising future for the biodiesel technology. Heterogeneous catalyzed production of biodiesel has emerged as a preferred route as it is environmentally benign needs no water washing and product separation is much easier. The number of well-defined catalyst complexes that are able to catalyze transesterification reactions efficiently has been significantly expanded in recent years. The activity of catalysts, specifically in application to solid acid/base catalyst in transesterification reaction depends on their structure, strength of basicity/acidity, surface area as well as the stability of catalyst. There are various process intensification technologies based on the use of alternate energy sources such as ultrasound and microwave. The latest advances in research and development related to biodiesel production is represented by non-catalytic supercritical method and focussed exclusively on these processes as forthcoming transesterification processes. The latest developments in this field featuring highly active catalyst complexes are outlined in this review. The knowledge of more extensive research on advances in biofuels will allow a deeper insight into the mechanism of these technologies toward meeting the critical energy challenges in future.

Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow

This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.