Developing and delivering a software internationalisation subject

This paper describes the content and delivery of a software internationalisation subject (ITN677) that was developed for Master of Information Technology (MIT) students in the Faculty of Information Technology at Queensland University of Technology. This elective subject introduces students to the strategies, technologies, techniques and current development associated with this growing 'software development for the world' specialty area. Students learn what is involved in planning and managing a software internationalisation project as well as designing, building and using a software internationalisation application. Students also learn about how a software internationalisation project must fit into an over-all product localisation and globalisation that may include culturalisation, tailored system architectures, and reliance upon industry standards. In addition, students are exposed to the different software development techniques used by organizations in this arena and the perils and pitfalls of managing software internationalisation projects.

Program-level support for protecting an application from untrustworthy components

Many software applications extend their functionality by dynamically loading executable components into their allocated address space. Such components, exemplified by browser plugins and other software add-ons, not only enable reusability, but also promote programming simplicity, as they reside in the same address space as their host application, supporting easy sharing of complex data structures and pointers. However, such components are also often of unknown provenance and quality and may be riddled with accidental bugs or, in some cases, deliberately malicious code. Statistics show that such component failures account for a high percentage of software crashes and vulnerabilities. Enabling isolation of such fine-grained components is therefore necessary to increase the stability, security and resilience of computer programs. This thesis addresses this issue by showing how host applications can create isolation domains for individual components, while preserving the benefits of a single address space, via a new architecture for software isolation called LibVM. Towards this end, we define a specification which outlines the functional requirements for LibVM, identify the conditions under which these functional requirements can be met, define an abstract Application Programming Interface (API) that encompasses the general problem of isolating shared libraries, thus separating policy from mechanism, and prove its practicality with two concrete implementations based on hardware virtualization and system call interpositioning, respectively. The results demonstrate that hardware isolation minimises the difficulties encountered with software based approaches, while also reducing the size of the trusted computing base, thus increasing confidence in the solution’s correctness. This thesis concludes that, not only is it feasible to create such isolation domains for individual components, but that it should also be a fundamental operating system supported abstraction, which would lead to more stable and secure applications.

Locating packaged software in information systems research

The papers in this issue focus our attention to packaged software as an increasingly important, but still relatively poorly understood phenomena in the information systems research community. The topic is not new: Lucas et al. (1988) wrote a provocative piece focused on the issues with implementing packaged software. A decade later, Carmel (1997) argued that packaged software was both ideally suited for American entrepreneurial activity and rapidly growing. The information systems research community, however, has moved more slowly to engage this change (e.g., Sawyer, 2001). The papers in this special issue represent a significant step in better engaging the issues of packaged software relative to information systems research, and highlighting opportunities for additional relevant research.

The maintenance implications of the customization of ERP software

Enterprise resource planning (ERP) software is a dominant approach for dealing with legacy information system problems. In order to avoid invalidating maintenance and development support from the ERP vendor, most organizations reengineer their business processes in line with those implicit within the software. Regardless, some customization is typically required. This paper presents two case studies of ERP projects where customizations have been performed. The case analysis suggests that while customizations can give true organizational benefits, careful consideration is required to determine whether a customization is viable given its potential impact upon future maintenance. Copyright © 2001 John Wiley & Sons, Ltd.

Isolation and characterization of 21 polymorphic microsatellite loci in the iconic Australian lungfish, Neoceratodus forsteri, using the Ion Torrent next-generation sequencing platform

We isolated and characterized 21 microsatellite loci in the vulnerable and iconic Australian lungfish, Neoceratodus forsteri. Loci were screened across eight individuals from the Burnett River and 40 individuals from the Pine River. Genetic diversity was low with between one and six alleles per locus within populations and a maximum expected heterozygosity of 0.774. These loci will now be available to assess effective population sizes and genetic structure in N. forsteri across its natural range in South East Queensland, Australia.

Isolation of bioactive compounds that relate to the anti-platelet activity of Cymbopogon ambiguus

Infusions and decoctions of Cymbopogon ambiguus have been used traditionally in Australia for the treatment of headache, chest infections and muscle cramps. The aim of the present study was to screen and identify bioactive compounds from C. ambiguus that could explain this plant's anti-headache activity. A dichloromethane extract of C. ambiguus was identified as having activity in adenosine-diphosphate-induced human platelet aggregation and serotonin-release inhibition bioassays. Subsequent fractionation of this extract led to the isolation of four phenylpropenoids, eugenol, elemicin, Eugenol methylether and trans-isoelemicin. While both Eugenol and elemicin exhibited dose-dependent inhibition of ADP-induced human platelet serotonin release, only eugenol displayed potent inhibitory activity with an IC(50) value of 46.6 microM, in comparison to aspirin, with an IC(50) value of 46.1 microM. These findings provide evidence to support the therapeutic efficacy of C. ambiguus in the non-conventional treatment of Headache and Inflammatory conditions.

Isolation of two phenylethanoid glycosides from Eremophila gilesii

The leaves of Eremophila gilesii have been used traditionally to treat colds, headaches, sores, and chest pains. Our previous screening of Australian native plants showed that the methanol extract of the aerial parts of E. gilesii demonstrated notable inhibition of ADP-induced human platelet aggregation and serotonin release. Subsequent fractionation on the methanol extract led to the isolation of two phenylethanoid glycosides, verbascoside (1) and poliumoside (2). This is the first study reporting the presence of phenylethanoid glycosides in E. gilesii.

Nonlinear actuator fault detection for small-scale UAS

This paper presents a recursive strategy for online detection of actuator faults on a unmanned aerial system (UAS) subjected to accidental actuator faults. The proposed detection algorithm aims to provide a UAS with the capability of identifying and determining characteristics of actuator faults, offering necessary flight information for the design of fault-tolerant mechanism to compensate for the resultant side-effect when faults occur. The proposed fault detection strategy consists of a bank of unscented Kalman filters (UKFs) with each one detecting a specific type of actuator faults and estimating corresponding velocity and attitude information. Performance of the proposed method is evaluated using a typical nonlinear UAS model and it is demonstrated in simulations that our method is able to detect representative faults with a sufficient accuracy and acceptable time delay, and can be applied to the design of fault-tolerant flight control systems of UASs.

Isolation and use of chromosome 1 probes for linkage studies on Charcot-Marie-Tooth disease

Nine probes were isolated from a human chromosome 1 enriched library and mapped to regions of chromosome 1 using somatic cell hybrid lines. One clone, LR67, which mapped 1q12→q23 detected a BglI RFLP. This probe, as well as 4 other known chromosome 1 markers, α-spectrin, Factor XIIIB, DR10 and DR78, were used for linkage studies in 15 Charcot-Marie-Tooth disease (CMT1) families. Close linking of CMT1 to any of the 5 markers was not indicated. Total lod scores excluded linkage of CMT1 to LR67 and to DR10 at 5 cM or less, to DR78 and 10 cM or less, α-spectrin at 15 cM or less and Factor XIIIB at 20 cM or less. Possible linkage, however, was shown between LR67 and CMT1 at a distance of 30 cM. Also linkage at a distance of 5 cM was detected between this probe and α-spectrin.

An interpretive field study of packaged software selection processes

Packaged software is pre-built with the intention of licensing it to users in domestic settings and work organisations. This thesis focuses upon the work organisation where packaged software has been characterised as one of the latest ‘solutions’ to the problems of information systems. The study investigates the packaged software selection process that has, to date, been largely viewed as objective and rational. In contrast, this interpretive study is based on a 21⁄2 year long field study of organisational experiences with packaged software selection at T.Co, a consultancy organisation based in the United Kingdom. Emerging from the iterative process of case study and action research is an alternative theory of packaged software selection. The research argues that packaged software selection is far from the rationalistic and linear process that previous studies suggest. Instead, the study finds that aspects of the traditional process of selection incorporating the activities of gathering requirements, evaluation and selection based on ‘best fit’ may or may not take place. Furthermore, even where these aspects occur they may not have equal weight or impact upon implementation and usage as may be expected. This is due to the influence of those multiple realities which originate from the organisational and market environments within which packages are created, selected and used, the lack of homogeneity in organisational contexts and the variously interpreted characteristics of the package in question.

Fault detection in wind turbine : a systematic literature review

Wind power has become one of the popular renewable resources all over the world and is anticipated to occupy 12% of the total global electricity generation capacity by 2020. For the harsh environment that the wind turbine operates, fault diagnostic and condition monitoring are important for wind turbine safety and reliability. This paper employs a systematic literature review to report the most recent promotions in the wind turbine fault diagnostic, from 2005 to 2012. The frequent faults and failures in wind turbines are considered and different techniques which have been used by researchers are introduced, classified and discussed.

GO423 - the second Game On / brIGDA Independant Game Symposium

GO423 was initiated in 2012 as part of a community effort to ensure the vitality of the Queensland Games Sector. In common with other industrialised nations, the game industry in Australia is a reasonably significant contributor to Gross National Product (GNP). Games are played in 92% of Australian homes and the average adult player has been playing them for at least twelve years with 26% playing for more than thirty years (Brand, 2011). Like the games and interactive entertainment industries in other countries, the Australian industry has its roots in the small team model of the 1980s. So, for example, Beam Software, which was established in Melbourne in 1980, was started by two people and Krome Studios was started in 1999 by three. Both these companies grew to employing over 100 people in their heydays (considered large by Antipodean standards), not by producing their own intellectual property (IP) but by content generation for off shore parent companies. Thus our bigger companies grew on a model of service provision and tended not to generate their own IP (Darchen, 2012). There are some no-table exceptions where IP has originated locally and been ac-quired by international companies but in the case of some of the works of which we are most proud, the Australian company took on the role of “Night Elf” – a convenience due to affordances of the time zone which allowed our companies to work while the parent companies slept in a different time zone. In the post GFC climate, the strong Australian dollar and the vulnerability of such service provision means that job security is virtually non-existent with employees invariably being on short-term contracts. These issues are exacerbated by the decline of middle-ground games (those which fall between the triple-A titles and the smaller games often produced for a casual audience). The response to this state of affairs has been the change in the Australian games industry to new recognition of its identity as a wider cultural sector and the rise (or return) of an increasing number of small independent game development companies. ’In-dies’ consist of small teams, often making games for mobile and casual platforms, that depend on producing at least one if not two games a year and who often explore more radical definitions of games as designed cultural objects. The need for innovation and creativity in the Australian context is seen as a vital aspect of the current changing scene where we see the emphasis on the large studio production model give way to an emerging cultural sector model where small independent teams are engaged in shorter design and production schedules driven by digital distribution. In terms of Quality of Life (QoL) this new digital distribution brings with it the danger of 'digital isolation' - a studio can work from home and deliver from home. Community events thus become increasingly important. The GO423 Symposium is a response to these perceived needs and the event is based on the understanding that our new small creative teams depend on the local community of practice in no small way. GO423 thus offers local industry participants the opportunity to talk to each other about their work, to talk to potential new members about their work and to show off their work in a small intimate situation, encouraging both feedback and support.

Software as a service (SaaS) for small and medium enterprises (SMEs) : the role of intermediaries

Software as a Service (SaaS) is anticipated to provide significant benefits to small and medium enterprises (SMEs) due to ease of access to high-end applications, 7*24 availability, utility pricing, etc. However, underlying SaaS is the assumption that SMEs will directly interact with the SaaS vendor and use a self-service model. In practice, we see the rise of SaaS intermediaries who support SMEs with using SaaS. This paper reports on an empirical study of the role of intermediaries in terms of how they support SMEs in sourcing and leveraging SaaS for their business. The knowledge contributions of this paper are: (1) the identification and description of the role of SaaS intermediaries and (2) the specification of different roles of SaaS intermediaries, in particular a more basic role with technology orientation and operational alignment perspective and (3) a more added value role with customer orientation and strategic alignment perspective.